Really an excellent build, that will allow for flexibility between engines. Classic appearance by Miss Daisy qualifies this video as a "two thumbs up" production!

Like watching a Popular Mechanic magazine come to life. Nicely done Chad.

On your plate where the bell housing bolts are. You could flip it over and put ford bolt pattern, then you'd have both patterns on one plate. Just a thought. Love your videos and always waiting on the next one. Thanks for the informative and entertaing videos.

Very nicely done! Love to see a good initial plan and the ability to adapt as the build goes along. The end result is great! Also, after watching a ton of your videos I just realized your left handed…welcome to the club!

Nice work! Always look forward to seeing your new projects. Thank you!

That was pretty cool. I love that kind of genius.

Thanks pops. Me and my brother was just going to build one of those engine stands. And if you don't mind. We are using your idea. Thanks pops keep up the good work

We're looking forward to seeing that motor run.👍 thanks for the video.

Great job. You always just make things look easy and just simply make sense. Can't wait to see that hold a running engine 👍

I really enjoyed that today, looking forword to the next one.

Awesome I can hardly wait until that engine is running. Thank you for sharing

Nice stand ! I’d put a tool tray on it and a boat gas tank and a throttle stick plus a choke , but that’s me not you ! Lol. Oh and an oil pan / tray to change the oil would be handy .

Woo hoo!!! Let's get it!!! Best part of my Friday yet again! Today couldn't get here fast enough! 💙🙏🏼👊🏼

A fine design executed well. A run stand is always a good thing. Thanks. Central California watching.

One cool engine stand I can't wait to see the video with a motor on it run

you could probley just slot those motor mount plate holes to fit all kinds of engines with out making different plates for diff. engines ..just a thought .. great vid!!

I found your KZfaq channel last night and let me just say. This is by far my favorite KZfaq channel right now. Just makes me think of my paw and I really appreciate you being yourself!

Hope everyone is having a great new year so far!? Awesome way to finish up the week by watching your videos!!!!Your the best keep up the amazing work you do!!!!God bless you!!!!!!🙏🤓

This was a very cool project Chad. Thanks for the added laughs...!! Happy New Year...!! Cheers

Good to see you Sir, I hope all is well

Looks great! Engineer friend said to add more triangles to make structures stronger. Square turn into rhombus real quick. Triangle make square better.

Love your get 'er done work ethic! Nice work This N That!

In my heart of hearts, in all of life and all that I myself do love, I truly 100% from the bottom of my heart truly do believe that the 2 absolutely most gratifying things in the world at large are 1- cutting the grass. The whole nine yards, trimming, edging, weeding, blowing.. all of it, weekly during the summer. That's just the absolute 2nd best rewarding chore in the world. I LOVE doing the lawn. Still cut the parent's and the in-law's lawns EVERY week (and I'm 44).. 2- Fabricating something from scratch. No BETTER feeling than a freshly fabricated something. Anything.. Steel, wood, tile work, 3d printed.. anything. Cutting the grass and fabricating both take me to the same mindset of nirvana. I love LOVE it!! Great video my friend, thank you for this one!!

In the 1970 high School shop class we made a radio and t v tube tester and we used a chassis punch to make the holes in the sheet metal

I am a maintenance/printing process technician in plastics and man I learned the way you did by doing. I love your know now.

Friday is not over until This and That garage has been watched 💪💪💪

LOL! ... Nice Mud Dobber decoration on the side of the engine block next to the Fram oil filter ..... I think I have a few of those also! ...

It takes a special kind of fabricator to use only plans in your head, KUDOS! I heard you singing…you need to be in Nashville! 🤠 God bless 🙏🏼🇺🇸

Very nice run stand. Good video

Thanks for a great video keep them coming for a good year

Good job. A universal starting stand. You could probably sell some plans for that. Do you think you had a big enough grinder? I would think a normal 4 or 5" would have done the job. You are right on the china freight blades. Have you thought of putting some bloopers at the end of your video like others do? Keep up the good videos, love them all. Nice to see miss Daisy again.

Thx for posting. Been thinking on a engine test stand design for awhile but completely forgot about needing to get the engine lift stand under it. Happy New Year.

Great project and as always nice video, thanks for the ideas.

Nice job and works well, I would put some round safety pins through your upright posts under the vertical pinch slider, cant be too safe!

Regardless of what you're working on it's always interesting. Your run stand looks very nice, looking forward to seeing you operating it. Keep up the great work and have a wonderful new year 👍✌️🇺🇲

Happy New Year Chad! Glad to see your newest display of ingenious entertainment! I still have a few videos to catch up on, but that is what binge watching is for.

I love that it can be used for different engins

Nice....hear it run before....it goes in the "whatever" keep up the good work 👍 2023

A great video and a fantastic build. Well done.

Excellent Idea and design.

Mechanic, welder, fabricator, electronics, electrician, internet guru, some singing lessons and you will be a well rounded man, lol, very entertaining and informative. Keep up the good work.

Great video chad. Love ya bro. God bless👍

I always love watching my Saturday morning this and that garage

Very nice video as usual we might not agree on everything but you always make me think and keep me honest with myself and I always learn thank you sir PEACE ☮️

O degrees. Rain and snow? Just before Christmas. We had that here in Brighton, hour north of Memphis! It sucked for a little over a week!

Thanks for sharing Chad, looks great brother! Stay safe, warm and healthy my friend! Sending prayers for you and your family, Kirk from Louisiana! 👏🏻👏🏻👏🏻👏🏻👌🏻🤙🏻🤙🏻🙏🏻🙏🏻🙏🏻🙏🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

Looks great and I'm sure it will work for most engines with the built in adjustments you incorporated into the stand. 👍👍

Really enjoyed watching the new fabricate the stand. I'm so glad I found your Channel I watched every video you have. I enjoyed watching you work on things build things anything as always thank you for the hard work you put in the videos for us. Can't wait to see the shop get built machine in a couple videos back the poles in the ground can't wait till you get that done.

Man, i was torn with this 1. I love watching ya work on old junk. Buildin a run stand wasnt a project im interested in, but ya made it something i watched! Good job my man. I'm apparently in for whatever you're doing. Keep up the good work!

Nice build brother! A whole lot better than mine. You got me wanting to build a new un.

That turned out nice. Good job.

Good job Chad. Looking forward to seeing the engine running. Good luck buddy and a happy new year.

Try Starrett saw blades. Love the videos!

So I'm watching a video about the 30 cylinder Sherman Tank engine made by Chrysler. The video is Visioracer " the super complicated 30 cylinder....." on the first shot of the straight 6 cyl. As reference is Your Video at 2 mins, pulling the generator out of the tree row, your garage basement, I thought I'd see Mrs Daisy come running up but didnt.... check it out.

You have truly got an amazing engineering mind, another job well done Looking forward to seeing your next video

Those dirtdobbers were laying down some dimes on that block 😂😂😂

Can't wait to see how you're stand works. I might take some of your ideas and build my own. Good video!

Run stand looks great!! Love the control panel. Also and oh by the way, I think it’s a requirement of the universe that when you build a run stand, you make it impossible to get the engine crane frame under it. I did the same thing once upon a time.

That sir was the funnest cool video i have seen ,,, thats how i work in my garage lookin fer next video thank s sooooooooo much!!!!!!!!!!!!!!!

I bought one of those little roll a round engine stands got lucky got it on sale for 350.0 I don't have a welder or anything like that, can't wait to fire up one of three motors, one with boom tubes 357 chevy one 306 gt40p heads and pull headers and my bronco 351 gt40 heads and long tube hookers to welcome spring lol..

Great job, very informative and helpful keep the content coming 💪

that was truly awesome,,i know you always say that you are no expert but making that stand from scratch was pretty good! hats off to you !happy new year!

That there motor run is fine as frog hair. Great video as always my friend.

Nice work! That's going to come in handy!

Cool stand 👍. That flexplate sounded cracked

Good job Chad ! Real nice engin stand ! Simple yet good and strong 🤙🤙🤙

I don't know how I MISSED THIS EPISODE,, just now watching it,, I gotta clean up a mess I made, just about time you mentioned CHINA Freight ,I WAS TAKING A SWIG OF MELLO YELLO, AND WHEN I HEARD THAT I SPRAYED IT EVERYWHERE!!😲😳😳😂 reminds me of when I refer to TSC,,as HORSE SUPPLY ( ABOUT ALL THEY HAVE IS HORSE STUFF) AND WALMART MIGHT AS WELL BE CALLED "CHINA-MART"!!

Hello miss daisy! Nice work Chad 👍. Good to see you doing some low stress fab work.

Everything you do is awesome great job on the run stand 👍👍. Absolutely love all your videos keep up the good work.

I really like this making anything from scratch YOU DID GRATE !!!

Nice ,job ! I think though if it was I, I do the back like an engine stand where they move around for different blocks ,but it's very nice design ,can't wait to see more

May I suggest fitting a throttle controller it might just make things a little bit easier for you mate 😉

Enjoyed this video very much. Thank you

Great Job. Blessings from Texas

That’s a pretty neat engine test stand! 👍🏻👍🏻👍🏻

Cannot wait to see an engine running in that👍👍👍

Nicely done.

your comment about having to screw it up 2 or 3 times to get it right made me think of what my dad told me once, he built house pads and roads for a living and the company he worked for had an unofficial motto it was we do it right because we do it twice. lol

Nice piece of Back yard Engineering! Should work great!

You The Man!

You are slicker than a firehouse pole . I'll tell you what. Nice job brother 👍. God bless.

love it

Enjoyed the fab work

Awesome job

Happy new year sir! Great content as always.

Great job that will be a useful tool.

Pull out that gas-ka-leen and look what you can build Mr. Chad! Great video sir as always!

I don't wanna point out obvious kinda thangs BUT, you forgot the throttle. Something to actuate the carb will be a huge help when a motor is cold. FE's,Windsor's and 385's all have different motor mounting. The LA Dodge blocks, versus the new style magnum, are also different. Your 318,when you pull it, will show you the typical mounting. A Chrysler big block is another one you'll have to make a set for. The back plate, I'd build for maker too. The Gm bolt pattern's are pretty much the same.

I'm jealous. That is so cool.

That was fun to watch and your editing is perfect!

Some nice fabrication.

Great Job! I like it!If I ever need one I will Steal(I mean Barrow) this design!

Awesome build

Happy new Year to you.

Don't get the cutting wheels for that saw. Get yourself a metal cutting saw blade for that saw. It be spinning a bit faster then a saw actually made for that blade but it will work. Lots of people have swapped them but you will thank yourself you did it. Plus no more sparks or work harding and 100 times faster when cutting.

Nice job!

Love what you do👍

Great job! This should really come in handy!

Awesome work

nice job. a true example of redneck ingenuity: make what you need with what you have.