I've seen Ekimu's shoulder plates on Queen Beast from Hero Factory
@TrangH817 жыл бұрын
Daniel Keen
@slowed_sounds30454 жыл бұрын
Daniel Keen yo that’s true 👍good job
@brickmaster9333 жыл бұрын
Same
@IcyDUD33 жыл бұрын
@@TrangH81 WHAT IS UP BIONICLE NATION IM YOUR HOST KILLER KEENSTAR LETS GET ROIIIT INTO THE NEWS
@GameSlots79 жыл бұрын
Ekimu has the Mask Of Creation, Tahu, however, has the Mask Of Cremation
@stronk28008 жыл бұрын
+GameSlots7 That is a joke that me and my brother have had. good to know we are not the only ones thinking that ;p
@dobson.6 жыл бұрын
Badum cshh
@brendar83366 жыл бұрын
O R E D O M
@apotatoguylikesdogs67615 жыл бұрын
B O R E D O M lol
@apotatoguylikesdogs67615 жыл бұрын
B O R E D O
@camcam78748 жыл бұрын
Technically, since this set focuses on two figures, you could say its a semi-set for Ekimu, but apparently Ekimu will be getting a proper set in the next summer wave, but I'm avoiding pictures to avoid spoilage of imagery.
@nghoangviet23229 жыл бұрын
a cool fact I've found on biosector01 is that Ekimu has blue eyes when wearing the mask of creation and green eyes when wearing the golden protector mask.
@Leantypostr4 жыл бұрын
He's viet :p
@Naseem3843 жыл бұрын
@@Leantypostr ???
@Leantypostr3 жыл бұрын
Wot
@Swaggboyherb9 жыл бұрын
In Canada this set is 40 dollars but it is still really worth it for the mask of creation and the skull mask.
@PuppeteerGaming3 жыл бұрын
@Noah PEPPER yes, but it's a different color
@lewatoaofair24302 жыл бұрын
Get mask of creatshun on eBay and buy skall warweer
@lewatoaofair24302 жыл бұрын
@@PuppeteerGaming true
@shamanaseem7165 Жыл бұрын
@@lewatoaofair2430 bricklink....
@warriorpax57604 жыл бұрын
First, the shoulder pads for Ekimu were seen on the Fire-Chi Laval ultrabuild from Chima, 2013. Y'know, the whole "Fire-vs-Ice" crap. That was also the first time I saw those large hero factory feet (for Kulta and Basher) in pearl gold, which is nice.
@rowanmakesfilms8 жыл бұрын
Her is a tip for the stand.watch jang bricks review on it. that should help you.
@Langodan8 жыл бұрын
Yes they are new pieces, they were introduced in Lego Chima at the beginning of the year (I think) and then in Ninjago.
@elijahgillespie3828 жыл бұрын
I love these types of videos.
@for_hire3 жыл бұрын
Nice surprise to see another skelet man
@EClaire.10739 жыл бұрын
I don't know if you've noticed this, but if you take two of the mace parts and put them together, they kinda look like Makuta's mask
@dunkanbulk148 жыл бұрын
i gotta be honest, this set along side skull basher are probably the only summer sets i'm gonna get
@apotatoguylikesdogs67614 жыл бұрын
There’s an OVVUIYS connection between all the skull villains. They’re all spooky scary skeletons.
@CHROMST7 жыл бұрын
The shoulder pads for ekimu are from a hero factory set the queen beast
@screwdriverhandle41303 жыл бұрын
I had this set when i was small.
@davidguillen5263 жыл бұрын
well done? ehm xd
@bdablader959 жыл бұрын
Legojang uploaded a video on how to fix the arm issues. I miss the Voya-nui days T^T Everything was so much more crazy.
@benjaminharopolous14169 жыл бұрын
true dat
@CrimsonMoonM9 жыл бұрын
Isn't Ekimu's saw-blade put on the wrong way? I seem to recall the small ridges towards the edges specifically having to face forwards. By the by, to make the Mask of Creation face forwards on the stand, simply slide the sides of the stand construct slightly outwards. This'll cause enough friction to keep the mask facing forwards.
@RolloutReviews9 жыл бұрын
Yup. Someone else pointed that saw-blade thing out to me earlier, and I figured out how to make the mask stand work on my own a little while after filming this. :)
The shoulder pieces were from invasion from below.
@sepetahyoutube58969 жыл бұрын
you can just edge out the holders on the stand so the mask of creation is facing up
@lukethemonman89585 жыл бұрын
Nice
@thedriftyisaac60089 жыл бұрын
I'm posting this before the video. If I can't get this set for some reason I'm using this video to just help me make a moc the best I can.
@taylornguyen60479 жыл бұрын
Try spacing out the two vertical black pieces of the stand to create more friction for the mask to stand up
@l3EAT59 жыл бұрын
I used a black pin to fix that problem. A pain to get it together. But its worth it in the end.
@taylornguyen60479 жыл бұрын
31-61 Beats or that, much more affective then mine, I tried doing that, but I had none at the time, so I just spaced it out without using any extra parts
@mjsinferno78338 жыл бұрын
likes its neck joint flips the bird to its face
@for_hire3 жыл бұрын
That extra neck artic is so the head isn't short
@GrandRobo8 жыл бұрын
"Hello? Knife?" The psychopath within you is strong.
@TheAressandoro6 жыл бұрын
I like more the old tipe of masks with the little cross piece that goes inside of toa heads
@thienbaomai82158 жыл бұрын
I think that you need to put an extra friction extender to skull basher if you will like just for alot more poseabillity and i might have some thing wrong with the words
@M_Max_1867 жыл бұрын
Yes
@honestmistake81674 жыл бұрын
I think that ekimus shoulder plates are from the chima ccbs sets that were only released in europe
@jonjonjet1449 Жыл бұрын
It's actually the same amount of friction just distributed differently
@Eliciamac5 жыл бұрын
My Ekimu mask is blue (and translucent)!
@Camenye Жыл бұрын
Ok so like my friends were trying to convince me to play overwatch 2 and they started describing characters bc I did not compreend a word they were saying, so they came to this character and described it as “A very small guy with a hammer that also shoots stuff” They accidentally described ekimu
@neon_lavander7 жыл бұрын
the activitie book came with the gold and trans blue melded protector mask
@joshuamassang6068 жыл бұрын
to get the mask of creation to stay on the stand you don't push side bits all the way in you just put the mask on and then push the side bits out so it stays in place : P
@TrangH817 жыл бұрын
No a legendary mask is the mask of ultimate power!
@mr.timothytanner25728 жыл бұрын
What do you think about the pictures of the new Bionicle sets
@JonathanMP238 жыл бұрын
To fix the mask problems i put a black pin in the middle
@l3EAT59 жыл бұрын
use the last black pin for the mask of creation's stand. it is a more effective way than the normal effective way.
@RolloutReviews9 жыл бұрын
Hmmm. That works, too. But I just like having it built as the instructions tell me to have it. :P
@taylornguyen60479 жыл бұрын
***** try spacing out the two bars that hold the mask, not as affective, but serves as a good substitute, without using any extra parts
@RolloutReviews9 жыл бұрын
Mhmm, That method was the other method I was referring to when I said "too."
@DannyBoiOfficial5 жыл бұрын
12:42 they came in a chima set
@willyramirez19858 жыл бұрын
when are the reviews coming out?
@greatmiru20645 жыл бұрын
He has all of three legendary mask Life,Time and Creation
@lewatoaofair24302 жыл бұрын
Hi I hope you take over the mterrin yurnervers
@QuesoSabrosos9 жыл бұрын
I watched this vid and then it was gone. I thought my iPad was broken for a few hours.😆
@injuredscout95299 жыл бұрын
It really brings up the tension when he says giant. Too bad it was pointless.
@RetroTSSoS9 жыл бұрын
What's your favorite bionicle set?
@willyramirez19858 жыл бұрын
new sets coming next year
@teunvanbloemendal11178 жыл бұрын
i got it as a gift for sinterklaas, whits is something like crismas,but than in holland/netherlands
@ninjagamingnetworks8 жыл бұрын
have you seen some of the 2016 sets the new villain is really cool
@stronk28009 жыл бұрын
Will you be doing the Star Wars constraction figures when they come out?
@robertdulberg55078 жыл бұрын
Dude are you going to do more LBX review
@haydenweil19308 жыл бұрын
You know I see Ron Perlman as the voice of Kulta.
@klydesangalang20602 жыл бұрын
Its so funny that the stans of the mask of creation looks like a mic stans hahahahha
@TuNguyen-fc1mn9 жыл бұрын
Wow this hasent been very long
@vinothtss34739 жыл бұрын
Is there any other way to fix Skull Grinder's arm ? Because when he is holding his main weapon and moving outwards his hand will fall back down for some epic pose
@Naseem3843 жыл бұрын
Take a friction gear from ekimu’s gearbox and put it on kulta’s.
@phoenixdblack8 жыл бұрын
This mask of creation looks like the Mask in TLOZ: Twilight Princess.
@Hindenberg3 жыл бұрын
Cinderella rolly thing
@PlasticToa4 жыл бұрын
the skull villian swords kindof remind me of hewkii inika's axe
@knifetm8 жыл бұрын
Ekimu is a mixture of all the protecters
@isabellaolsen15437 жыл бұрын
Thay Ung ekimu is the mask maker like makuta
@TrangH817 жыл бұрын
Thay Ung maybe
@theakiwar91187 жыл бұрын
Breaded Pilot25 Nope. More like Mata Nui/ Turaga Vakama
@ethankim10899 жыл бұрын
akimu before he gets the mask of creation? Does this mean that lego will make another akimu set that is bigger?!
@thienbaomai82158 жыл бұрын
It is weird that the bottom spike of his main weapon is the one piece that have standard color red
@inferno12345619 жыл бұрын
why the re-upload?
@shadowgaming-728 жыл бұрын
u could have two box one for mask maker and the other box for skull grinder
@dominiccleveland91039 жыл бұрын
it is
@sandorkovacs94348 жыл бұрын
where you get the gold mask of time please review that set
@godzillacc58 жыл бұрын
i personaly dont think ekimu is a "mata-nui" figure, he's more like takanuva of some sorts. but i still think we are going to see a god-like figure in the future
@apotatoguylikesdogs67614 жыл бұрын
Not all the first wave sets had gearboxes. LOSSS and the protectors didn’t.
@kohaas31959 жыл бұрын
You just said fugly was it intensional because I use that word too :)
@bradleyhavens50374 жыл бұрын
Ok tell me what is the whole big robot thing because I was born in 2007 and I need to follow up here
@for_hire3 жыл бұрын
I can hear crickets in the background
@VictorianKnightShadowRuler9 жыл бұрын
Is your next Bionicle review going to be Toa Mata Nui?
@kevinperez91759 жыл бұрын
Hi my favorite toa is Tahiti
@Crispky5 жыл бұрын
Chima sets
@ProfDragonVale9 жыл бұрын
26:50 "It's a shooty hammer..."
@misticlady19328 жыл бұрын
it can stor on his back
@thomasliu54579 жыл бұрын
Should've followed the instructions and sorted the pieces out. :P
@RolloutReviews9 жыл бұрын
ECH.
@sepetahyoutube58969 жыл бұрын
+RolloutReviews this is RolloutReviews not +JANGBRICKS alsomI love your build reviews gosh other lets build reviews are too slow and they take like 50 minutes on a protector.
@aedaniammx75599 жыл бұрын
ECH!
@radjagurning87568 жыл бұрын
+RolloutReviews but now you do it
@csaladszloboda7867 жыл бұрын
Thomas Liu ijii
@paulk.2218 жыл бұрын
It was in a giant robot?!!!what I need to catch up
@bradleykay73797 жыл бұрын
ix did you build 2016 makta
@X_Lander8 жыл бұрын
I can't get over the fact that "Kulta" literally means "gold" in Finnish
@Eemelss8 жыл бұрын
Torilla tavataan!
@suomalaene98924 жыл бұрын
Terve
@fernandoranger15668 жыл бұрын
did you know scull slicers chestplate is the most strongest and it shoots electronic fire ball
@annasthesia84329 жыл бұрын
Ummm... Why did you re-upload the video?
@gasansol90868 жыл бұрын
I got this set but i have the push things LOL!
@electrofaith12765 жыл бұрын
In your tahu set is one character is 40 mins and two 30
@fernandopm52383 жыл бұрын
MOST RECENT
@sandorkovacs94348 жыл бұрын
where you get the gold mask pf time please review that set
@PlasticToa4 жыл бұрын
it was in limited edition vahki sets.
@zef67499 жыл бұрын
Lol I spent like 15 mins sorting all the pieces out before I even built the set, instead of dumping all of them out into 1 huge pile. XD
@Thedarkassassin888 жыл бұрын
Where did you get that Mask of Time from!?? :O
@RolloutReviews8 жыл бұрын
In 2004 they ran a promotion where some of the Vahki included one.
@stronk28008 жыл бұрын
Kulta's horns are not new pieces, they are however, recolors.
@pek21748 жыл бұрын
Hey, fancy meeting you here. :D
@stronk28008 жыл бұрын
Pekekoa OfJungle lol. hi
@moxichillin8 жыл бұрын
How much is that set?
@dobson.6 жыл бұрын
Hey There
@sean55727 жыл бұрын
about the horns, NOOOOOOOOO!
@grimlock58323 жыл бұрын
He called Canadian a race
@littlespiderjunior67984 жыл бұрын
I don’t even have the set and I have the right pieces so I could make culta
@davinahoang69498 жыл бұрын
Keep the mask on and pull the sides out
@for_hire3 жыл бұрын
9:20 how do you add friction
@davidguillen5263 жыл бұрын
do you still need help?
@sepetahyoutube58969 жыл бұрын
what the heck is a rolly thing
@aedaniammx75599 жыл бұрын
#Skeletmans
@NebbyNova8 жыл бұрын
well rollout I decide to have a little race with the video building the set. I finished at the time length of the video 24:36Note:I started building when you started building in the video. What do I win?