Let’s Carve This Simple 3D Eagle on the CNC

No video

Let’s Carve This Simple 3D Eagle on the CNC

Рет қаралды 423,161

Күн бұрын

I am going to show using VCarve Pro how easy it is to carve this simple 3D project. Basic steps to get you carving quickly.
This channel in part is funded by viewers like you. Please help me continue to creating videos by becoming a patron.
/ pawpawsworkshop
You can also support my channel through Paypal
www.paypal.me/...
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Link to Laser: jtechphotonics...
Link to Z axis and CNC machine kits and parts for DIY CNC
cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com...
WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
Affiliate Link to Purchase STARBOND GLUE:
15% OFF PROMO CODE pawpawsworkshop15
www.starbond.com?rfsn=2376834.ca9c16
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases:
Link to My Amazon Affiliate Store:
www.amazon.com...
Frequently needed supplies:
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Пікірлер: 389

@johns2926 3 жыл бұрын

Instead of dragging the corner of the stl to resize and re-centering with the button you can hold shift while dragging the corner of the image to resize and it will keep the image centered. Saves you a bit of time.

@PawPawsWorkShop 3 жыл бұрын

Excellent point. Thank you very much.

@alwellenweremadu7564 2 жыл бұрын

Please, are you good at creating STLs? I need the services of an expert.

@TheJosa007 3 жыл бұрын

It is amazing what you can do with a little bit of knowledge. The eagle piece is truly amazing. It's got to be a total satisfaction to look at what you have created.

@PawPawsWorkShop 3 жыл бұрын

Thank you very much.

@brendanfitzpatrick7399 2 жыл бұрын

yeah, with a little knowledge you can basically print or cut a test page..bravo! sorry but i was hoping for so much more in this video.. I don't have a CNC but even if i did, i wouldn't have much interest in printing ("cutting") a piece of clipart from within the application, all CNC software provide the same examples as a 'test print'.. it would have been 10x more valuable if he used a generic image outside of the clipart to really show how to do something unique . .

@ndoghouse6853 Жыл бұрын

@@brendanfitzpatrick7399 Believe me if you just got a machine setup from scratch and did all the wiring etc then you dont give a crap about value or where your test piece came from. You just want to make sure your machine works as intended and with your choices of the many softwares you decided to use to create it. Have you ever printed a test page from a new printer? Well thats all it is. Frankly a 3D eagle in wood beats the hell out of a sheet of paper your gonna throw in the trash anyway.

@johnparken2607 11 ай бұрын

With all due respect to Ms Fitzpatrick, your video is exactly what I wanted and what I expected. It is a step that needs to be taken in my learning process. This is all new to me. Kudos to you for taking the time (yours and ours) to clearly explain the steps that you were taking. That will enable me to perform a similar on my computer and CNC as I progress in the process of properly using these powerful and innovative new tools. The pace was certainly not too slow. THANKS so very much.

@patrickreade6119 6 ай бұрын

He created nothing a computer and a machine created it. Come back when he carves something by hand. No real talent needed to do this.

@sfg18b Жыл бұрын

It can out great. I read one comment about the cost of the software. I said that to, after reading on it, I purchased it. You get what you pay for. Trust me. It will raise you game.

@motoputz3201 2 жыл бұрын

thanks, great learning tool for me 19:27 pre-drilling is key for holding work piece in position and the spoil board surface won't get those annoying screw bumps and lengthen the spoil board's usefulness.

@PawPawsWorkShop 2 жыл бұрын

Yes, excellent idea

@Evocatorum 2 жыл бұрын

@@PawPawsWorkShop If you go back and look at 21:09, you can see that the side on the project isn't flat either because the wood is slightly bowed or because the particle board below isn't level with the rest of the table. It would appear that the particle runner isn't tied down completely or perhaps there's something under it? I can't tell. Either way, thanks for taking the time to make this video for us!

@LanceMcGrew 2 жыл бұрын

Sure wish this Paw Paw was my neighbor :). I'm a Papa too :)

@PawPawsWorkShop 2 жыл бұрын

Awesome!!

@metalheadmachining4586 2 жыл бұрын

Enjoyed the video, been a machinist for years and recently got a Laguna IQ and Aspire with vcarve and your fixing to gets some views here hehe nice explanation of software.

@PawPawsWorkShop 2 жыл бұрын

It Is my pleasure to help. Congratulations on your purchase. Thank you very much

@sebastianocavalli1357 2 жыл бұрын

Hi Paw Paw, thank you very much for the great tutorial,Thank you very much Seby

@PawPawsWorkShop 2 жыл бұрын

My pleasure. Thanks for watching

@toumahadad501 3 жыл бұрын

Thank you for all the information That you give. Valuable and very helpful for beginners

@PawPawsWorkShop 3 жыл бұрын

Glad it was helpful! You're very welcome

@jimking9646 3 жыл бұрын

My ShopSabre is coming next Wednesday cant wait.. Great video

@PawPawsWorkShop 3 жыл бұрын

Awesome! Have fun.

@rocketsurgeon4876 3 жыл бұрын

@@PawPawsWorkShop Where do you sell the items you make?

@jeffjaekel2558 2 жыл бұрын

Cool! Nice job explaining and showing the process!

@PawPawsWorkShop 2 жыл бұрын

Thank you very much

@rrr92462 2 жыл бұрын

Excellent demo.

@PawPawsWorkShop 2 жыл бұрын

My pleasure. Thanks for watching

@mancaveprinting 3 жыл бұрын

Hello Paw Paw, I am getting into CNC carving and like your video. Maybe this is helpful for you: You can make a screencast by hitting Windows+g together. So you do not have to pay attention to lighting and get rid of the flickering.

@PawPawsWorkShop 3 жыл бұрын

Yes, that will work and I have tried it however I can not bring that file into my editing software

@robertlaurendeau9394 Жыл бұрын

Well done PAW PAW!

@PawPawsWorkShop Жыл бұрын

Thank you very much and thanks for watching

@rodneywright284 3 жыл бұрын

Good Job, can't wait until you get into more 3d settings

@PawPawsWorkShop 3 жыл бұрын

Thank you, I'll be coming out soon with another one.

@TheJonboix 2 жыл бұрын

I liked and am subscribed Thank you for sharing your knowledge

@PawPawsWorkShop 2 жыл бұрын

Thank you very much. I appreciate your support very much.

@matthewschatzel6900 3 жыл бұрын

Great work paw paw

@PawPawsWorkShop 3 жыл бұрын

Thanks! 😄

@bullswoodworks8398 3 жыл бұрын

like and Subbed. great video. playing with my Shapeoko XXL and still learning......your videos help. TY!

@PawPawsWorkShop 3 жыл бұрын

Thanks for the sub! Awesome! Thank you very much.

@THirstyCamel1023 3 жыл бұрын

Awsome carve

@PawPawsWorkShop 3 жыл бұрын

Thank you very much.

@ashkanseifi5413 3 жыл бұрын

Loved your video. thanks for sharing.

@PawPawsWorkShop 3 жыл бұрын

You’re very welcome

@jenniferbell4571 Ай бұрын

Thanks for this!

@PawPawsWorkShop Ай бұрын

My pleasure!

@lunnymav Жыл бұрын

So beautiful. Nice project.

@PawPawsWorkShop Жыл бұрын

Thanks

@consultor1019 3 жыл бұрын

Great work and video

@PawPawsWorkShop 3 жыл бұрын

Thank you very much!

@uncommenvideo5443 3 жыл бұрын

excellent video

@PawPawsWorkShop 3 жыл бұрын

Many many thanks

@cnctroubleshooting9052 2 жыл бұрын

Hi Paw Paw, A couple quick questions… so you did it all in one pass with the 1/8” bn, so it would have been cutting fairly deep. I heard you say 8-10% step-over, so you stepped over somewhere under .0125? And might I ask your feed rate? I’m very much a novice, and as such would have thought that deep a cut would have broken the bit.

@torowazup1 3 жыл бұрын

Just shared it before I watch video 👍🏼

@PawPawsWorkShop 3 жыл бұрын

You're the best! I appreciate that very much.

@bentebrunsvelt319 3 жыл бұрын

Beautyfull job

@PawPawsWorkShop 3 жыл бұрын

Thank you! 😊

@ridhadababi5858 2 жыл бұрын

. Good job, Thanks for sharing.

@PawPawsWorkShop 2 жыл бұрын

You’re welcome

@inspectr1949 3 жыл бұрын

Total novice at this not knowing where to get started, thank you.

@PawPawsWorkShop 3 жыл бұрын

One month ago I knew very little about 3d carving. Once you have a good understanding of VCarve then adding 3d is easy to do.

@davidhittenberger1651 6 ай бұрын

After I create the roughing tool path, calculate, and display it, I get a blank piece-no tool paths to display???????

@PawPawsWorkShop 6 ай бұрын

Open vectors is a definite possibility

@sylviacook2005 2 жыл бұрын

thanks for this fantastic video

@PawPawsWorkShop 2 жыл бұрын

My pleasure.

@georgelucas8586 3 жыл бұрын

Changing the size and color of your pointer would make it easier to follow.

@PawPawsWorkShop 3 жыл бұрын

Ok how is that done?

@mfrederickson1 6 ай бұрын

Great video - thanks

@PawPawsWorkShop 6 ай бұрын

Glad you enjoyed it

@Masis-dr5el 7 ай бұрын

❤, but kind of hard to fallow the 👉 arrow sir, can you add some yellow dot to be easy to eye to follow

@Mindstangle 9 ай бұрын

RIP PawPaw you will be missed

@PawPawsWorkShop 9 ай бұрын

I’m not gone yet. Hopefully I got a few more years

@josephadigwe26 7 ай бұрын

@@PawPawsWorkShop😂😂😂

@juansalmeron1537 3 жыл бұрын

Looks great paw paw

@PawPawsWorkShop 3 жыл бұрын

Thank you 🤗

@juansalmeron1537 3 жыл бұрын

Paw paw is this file shareable on inventables?

@PawPawsWorkShop 3 жыл бұрын

This file is on the Vcarve desktop or pro version when you purchase the software.

@kommanavikas426 Жыл бұрын

Its amazing. But how it calculates the depth of an image at different points or else we have to give manually height and depth just like priymid shape each step 1cm height

@ecrist 6 ай бұрын

Thanks for the video Paw Paw! But what happened to the rough cut you originally programmed?

@PawPawsWorkShop 6 ай бұрын

I decided to skip the roughing pass

@dusanrajh5025 8 ай бұрын

Hvala za predstavitev.

@jaimevillada9150 3 жыл бұрын

Desde Colombia , gracias por compartir.

@PawPawsWorkShop 3 жыл бұрын

gracias!

@Lucifer. Жыл бұрын

23:28 into the 26 minutes and fifty-three second video... it finally starts carving the eagle. But don't get excited, the eagle is completely fished by 24:00.

@PawPawsWorkShop Жыл бұрын

lol, most people want to know how rather than just see the action with no expaination. Thanks for watching.

@user-ig4mg7go1s Жыл бұрын

Fantastic video!!!

@PawPawsWorkShop Жыл бұрын

Thank you very much! I appreciate you watching my video

@user-ig4mg7go1s Жыл бұрын

@@PawPawsWorkShop Greetings from Serbia!

@jimgranfor3856 3 жыл бұрын

I enjoyed the video. The minor problem with online tutorials is the video is never clear. I totally lost how you connected the vectric lines before going to g file.

@PawPawsWorkShop 3 жыл бұрын

I’m not sure what you are asking. Vectric lines? After selecting the bit and creating the toolpath you just save the toolpath and the file so that you can pull up the file at a letter time. Then save the gcode and carve. Yes, you do need to use the correct post processor. I can’t tell you which one to use due to the vast different types of machines and controllers

@zinoorr1056 2 жыл бұрын

Hey paw paw, your work is outstanding. I’m about 12 months from retirement and I want to get into CNC routing for fun and to help with local charities. Question, is there a better computer use for the software than others? Are you using a Mac or PC. I wish I could get training from someone like you! Your work is outstanding.

@PawPawsWorkShop 2 жыл бұрын

Thank you very much. Congratulations on your upcoming retirement. I use a pc laptop. To run the CNC does not take a very power computer however, if you are planning on using the same computer to design you will need a more powerful computer. You can get training from me. I have over five hundred videos that brings me into you shop anytime you wish.

@zinoorr1056 2 жыл бұрын

@@PawPawsWorkShop Thank you, I am a visual & hands on learner. I appreciate all your work. Thank you fro the speedy return. I live in NJ and have not been able to find CNC router training that makes any practical sense for me. I will dig into your work. Thanks again.

@they.luv_lillard4477 3 жыл бұрын

Great vid

@PawPawsWorkShop 3 жыл бұрын

Thank you very much

@trinidadian_jedi Жыл бұрын

You know I like you. You got that old school/ grandpa vibe. I never got to know my grandpa. Lol you are advertising for McDonald's. That's not good.

@PawPawsWorkShop Жыл бұрын

Thank you, not sure what you mean by McDonalds

@patrickbodine1300 Жыл бұрын

Go ahead.

@PawPawsWorkShop Жыл бұрын

3D carving is both beautiful and fun

@LuisLopez-gd9hu Жыл бұрын

Hello, great video tutorial!! Do you have another video but with rotary toolpath? Thank you

@airbornearchitect7062 2 жыл бұрын

wow , LIKE that....

@PawPawsWorkShop 2 жыл бұрын

Thank you very much

@fenders9911 3 жыл бұрын

very nice job great lesson !!!

@PawPawsWorkShop 3 жыл бұрын

Thank you

@oldNavyJZ Жыл бұрын

The roughing pass isn’t to save time. It is to save the life of your smaller bit.

@davidholdman8015 3 жыл бұрын

Awesome

@PawPawsWorkShop 3 жыл бұрын

Thank you

@melodywarman7092 Жыл бұрын

Very nice project and nicely done. But if i want to put a circular cutout in a board how would I do it? I have the basic vcarve and not the vcarve pro.

@PawPawsWorkShop Жыл бұрын

Just put a separate toolpath on the outside and carve it out with a profile toolpath

@TLBxGoldenAxe 2 жыл бұрын

Gorgeous piece, sry if I missed it, but what was the depth of cut on that little ball nose

@PawPawsWorkShop 2 жыл бұрын

Thank you very much. I can’t remember exactly but depth was about .5”

@TLBxGoldenAxe 2 жыл бұрын

Cheers fella.

@IanStreten 3 жыл бұрын

Very very new to cnc routing. Machine being delivered tomorrow. At present trawling my way through various software tutorial packages. Have found your series very helpful with my quest for the best software product. That is Inventables Easel. Rather excitedly saw your post of the Eagles head but very disappointed that software was Vectric Vcarve. As a mere Hobbyist no way can I afford to buy the Vectric product. So is there anything available within Easel that can create a similar result? Thank you.

@PawPawsWorkShop 3 жыл бұрын

The XCarve is capable of carving this type of design. You will however need other software to create or modify. This eagle is part of the package that comes with the Vectric VCarve software.

@erdalevcil2445 2 жыл бұрын

good job

@PawPawsWorkShop 2 жыл бұрын

Thank you

@turbolevo8703 3 жыл бұрын

You should’ve drilled clear holes through your workpiece which would’ve prevented it lifting.

@PawPawsWorkShop 3 жыл бұрын

That would be one way to do it. Thanks.

@jmlp1368 6 ай бұрын

Wow,,,, you should tech kids at school.( you have good actitud to explain stuff like this meticulously)

@PawPawsWorkShop 6 ай бұрын

Thank you very much

@user-po2up3re4m 5 ай бұрын

I want to know the name of the software and where i can get it if i want to dowload it

@PawPawsWorkShop 5 ай бұрын

Vectric.com is the site. This is the VCarve Pro software. The desktop version will do this type of 3D carving as well

@daneilers739 3 жыл бұрын

As usual, GREAT job!!!

@PawPawsWorkShop 3 жыл бұрын

Thanks again! I appreciate this very much.

@brandonkrause4333 2 жыл бұрын

dont know if you guys heard but hit the subscribe, like, and share, and he has a patreon

@PawPawsWorkShop 2 жыл бұрын

Thank you very much

@robmaguire6689 2 жыл бұрын

Hi, Thank you very much for an excellent lesson. Can you please confirm something as I think I may have a software problem. That is …..having copied exactly every move that you made (I did this several times) I am finding that my cut time shows 09hrs 09 mins and :24 secs. Your time works out to 01hr 53 mins some odd secs so I cannot determine why that should be. Can you help please? TIA. Rob….

@PawPawsWorkShop 2 жыл бұрын

You might want to look at you stepover percent

@TonyHall-iw2pz 4 ай бұрын

Good 👍

@PawPawsWorkShop 4 ай бұрын

Thank you very much

@nicholasaloi107 2 жыл бұрын

How do you get the 3d eagle? Is it something I can get from your video so that I can try it.

@PawPawsWorkShop 2 жыл бұрын

The 3d eagle is part of the VCarve software by Vectric. When you purchase the software you will get the eagle and much more.

@nitrorrat8190 10 ай бұрын

Hi im new to this I would like to get a cnc router for carving what machines do you recommend I am in the 300 dollars range

@dhmphoto 2 жыл бұрын

Thanks for the video. It is really helpful for me to better understand 3D carving. I do have a question. Could this be done with VCarve Desktop instead of the Pro version? I see reference to 2.5D carving versus 3D carving. Is what you showed today 2.5D?

@PawPawsWorkShop 2 жыл бұрын

Thank you very much. Yes, you can do this on VCarve desktop. This is actually 2.5 D but many people call it 3D

@tedlitz7266 10 ай бұрын

Nice vidio. Show more details if you can.

@ayotaamer 3 жыл бұрын

Very nice job 💐❤️🇮🇶

@PawPawsWorkShop 3 жыл бұрын

Thank you so much 😀

@tommc49 3 жыл бұрын

Newbie question: can you do this type carving with the FoxAlien?

@PawPawsWorkShop 3 жыл бұрын

Yes, it is possible. You're software is the main factor. Easel will not work to do this type of carving. You need VCarve or similar software.

@ApexWoodworks 2 жыл бұрын

I notice that you're not using any form of dust collection on this carving job. Is this for photographic purposes, and if not, then could you show us what you've got for dust collection? Thanks for a great tutorial.

@PawPawsWorkShop 2 жыл бұрын

No dust collection due to camera. I seldom use dust collection on this cnc

@richarnaud7794 3 жыл бұрын

Good Video..Thanks

@PawPawsWorkShop 3 жыл бұрын

You are welcome

@musicmaze640 3 жыл бұрын

Thanks for the great intro to VCarve. Do you have a video that does both a rough and a detail cut? Also, could you have done the cut with Easel instead of UGS? Thanks again!

@PawPawsWorkShop 3 жыл бұрын

I did not do a rough cut. I only used the detail cut toolpath. The design modification has to be done in VCarve or similar program. You can use easel as the sender and carve it out.

@musicmaze640 3 жыл бұрын

@@PawPawsWorkShop I understand that you didn't do a rough cut here. I was just wondering how to do two cuts with UGS. I've done it in Easel, so I guess it's similar. Thanks!

@PawPawsWorkShop 3 жыл бұрын

It is two separate files that you run separately.

@jimking9646 3 жыл бұрын

Good Morning PawPaw I was just setting up to vcarve this eagle when I go to tools i picked the 1/8" ball nose it says 100"/sec is that to fast for a 1/8" bit?

@PawPawsWorkShop 3 жыл бұрын

Oh wow! That does seem fast. 100"/min makes more sense for the first time

@stephensparks3621 3 жыл бұрын

How easy is it to setup the interface between the X-carve machine and Vcarve program. I am down loading the trial program now.. Is Easel still required? My goal is to be able to work should internet not be available.

@PawPawsWorkShop 3 жыл бұрын

It is not a problem. I have done some videos showing this. All that is necessary to design in VCarve, generate the gcode in VCarve and then open Easel and open the gcode file and carve. I have started using UGS (Universal GCode Sender) on my new machine instead of using Easel. You only need the internet to design and save the files. Not to run the actual carve.

@stephensparks3621 3 жыл бұрын

@@PawPawsWorkShop Kewl, that is what I want. Have some studying to do. Will continue watching your Posts. Thank you.

@4691cvdivad Жыл бұрын

So I followed you to a T in VCarve Pro, the only problem is that my carving wanted to take 5-½ hours to do? Do you happen to know why this would be the case? There is no way this should take that long. Thanks

@PawPawsWorkShop Жыл бұрын

It may be the feed rate or the stepover

@brendanfitzpatrick7399 2 жыл бұрын

nice intro to CNC but it would have been nice to use a generic grapic outside of the apps own clipart.. this video is parallel to learning how to set tones/contrast/brightness of an inkjet printer.. not overly interesting IMHO.. I give this one thumbs up for the effort ..

@PawPawsWorkShop 2 жыл бұрын

Thanks

@Kilroy1225 3 жыл бұрын

How about posting the easel file on the inventible site?

@PawPawsWorkShop 3 жыл бұрын

This eagle is part of the file provided when you purchase the Vectric VCarve Desktop. It is not part of Easel. I can not share a file that is from that company

@Dieselfitter01 2 жыл бұрын

this is great

@PawPawsWorkShop 2 жыл бұрын

Thank you

@danimade4629 3 жыл бұрын

sure you are successive man

@danimade4629 3 жыл бұрын

and use laptop screen recorder

@PawPawsWorkShop 3 жыл бұрын

Would love to. The problem is that the screen recorder is not compatible with my editing software on the iPad. If you know of a solution I welcome it

@danimade4629 3 жыл бұрын

sure i recommended for your tutorial use obs screen recorder

@jimking9646 3 жыл бұрын

Great info

@PawPawsWorkShop 3 жыл бұрын

Thank you very much.

@nancyrocha7372 3 жыл бұрын

Great video, very informative. Thank you for taking the time to share your knowledge. We have been doing a lot of research to buy our first cnc machine, would you recommend the x carve pro(it will be out in a few months) or the cnc4newbies machine?

@PawPawsWorkShop 3 жыл бұрын

First thank you very much. In today's market there are many great machines. I know only what I have seen in the commercials regarding the XCarve Pro. It is a new unproven platform. I have questioned the Inventables team but I must say that I would go with the proven product and chose one of the cnc4newbies products. They are very solid and I love mine.

@brandonkrause4333 2 жыл бұрын

i would not recommend the xcarve. i just got one and i wish i would have spent another 1000 and got something a little better. the button head screws it came with for assembly are garbage. i had to re tap the holes for the dust collector brackets. this machine is veeery overpriced. i dont expect the xcarve pro is much different besides being more rigid...

@thefulchman 2 жыл бұрын

How hard would it be to carve the eagle head out of different wood and make it an inlay into the circle? I don't have a CNC yet but I'm very interested in getting one.

@PawPawsWorkShop 2 жыл бұрын

That’s doable. Just have to set up a cut line on the outside of the eagle. Thanks for watching

@s1040480 3 жыл бұрын

What program or software are you using and what website do you buy it from

@PawPawsWorkShop 3 жыл бұрын

This is the VCarve Pro by Vectrics. This file is part of the files that comes with the software.

@foxabilo 3 жыл бұрын

Am I missing something or isn't it a bug in the software that it did not inform you that part of the carving was above the material top dimension? I mean the software knows the material thickness and while it could not detect errors in the physical material it should be able to detect when it creates gcode that is above the top of the work?

@PawPawsWorkShop 3 жыл бұрын

It was something visually that I could see. I believe that the carving was at the material surface and therefore would not be shown.

@foxabilo 3 жыл бұрын

@@PawPawsWorkShop Ah, so possibly the Z probing was off by a bit and that caused the tip to ride above the work, that's my guess anyway.

@rpremkumarjones1928 3 жыл бұрын

superb sir thank you

@PawPawsWorkShop 3 жыл бұрын

You're welcome

@thebryanongaming1965 3 жыл бұрын

what name cnc it is ? Hello, it's my first time in the cnc industry and I would like to start with something small that makes 3D things in wood.

@PawPawsWorkShop 3 жыл бұрын

This one is the cnc4newbie, new carve. I also have a XCarve by Inventables. You said you are looking for something small. These are both 1000mm. I am currently looking a two machines that are much smaller. I will be putting them through there paces to see how they will do. I will start to introduce them toward the end of March and into April

@alekjwrgnwekfgn 3 жыл бұрын

@@PawPawsWorkShop would a 3040 do this? And is there open source software?

@thomgwayi8138 2 жыл бұрын

Great

@PawPawsWorkShop 2 жыл бұрын

Thanks

@jerryjensen2611 3 жыл бұрын

Hello. I am a relatively new user and have gotten pretty decent at easel pro (although not even close to your level) and would like to venture out a little. Could you tell me what what kind of file that eagle this would be? .stl .dxf or any of the zillion types of extensions. I am totally confused abut the file extensions. I thought the .stl was a 3d printer file. I don't have and cannot afford v-carve pro. I have easel pro. Is there any place I can go to get something like the eagle for free? Thanks.

@PawPawsWorkShop 3 жыл бұрын

This eagle is one of the free files in the VCarve from Vectric. When you make your purchase, there is a wide range of different files that you can download as well along with many others that you can purchase. You can start with VCarve desktop with is the least expensive option and later add the pro. You only pay the difference. With the desktop you will get the files.

@hangfeatphil905 3 жыл бұрын

Wondering waht the maximum width of the material you're carving can be...

@Fm-ss4uj Жыл бұрын

Does lightburn work for cnc and laser or just for laser only ?

@PawPawsWorkShop Жыл бұрын

Lightburn is designed for lasers. If you have a laser attached to the CNC then you most likely can control the laser with Lightburn

@dennismcaleer242 3 жыл бұрын

Can you use V Carve Pro with the x-carve, and how much does the V Carve Pro software cost ? Thanks Paw Paw. Dennis

@PawPawsWorkShop 3 жыл бұрын

Yes, you can use VCarve Pro with the XCarve. After you create you project you can save the gcode and use Easel as the sender to carve the project. Go to Vectrics.com for pricing.

@Alpha_DTF_Print 6 ай бұрын

🔥 @‌AlphaDTFPrint is setting trends with their latest post on DTF printing little flags on military tees! Have you tried incorporating unique designs into your uniform? Share your thoughts! 🚀 #DTFprinting #UniformTrends

@johnjuderjahn2054 Жыл бұрын

Hi Paw Paw! Any way you could share the STL file for this eagle now that Easel has the capability? I LOVE it! Thanks!

@PawPawsWorkShop Жыл бұрын

This eagle is not my design. It is part of the artwork you get when you purchase VCarve by Vectric

@robertbarnes4887 Жыл бұрын

Paw paw I just started with a 3018 cnc machine and I tried laser grbl I can't get laser grbl to work as well as easel I made something in easel and imported it to grbl but when I save it on the off line controler it saves as a different type of file that I guess the machine dont read. I would like to do this eagle head because I use to be in the 101st but I don't think the free of esiel file has it. However looking at the cost of both v carve and easel the price is around the $500 range i already do laser engraving with light burn but there's is a yearly subscription how does these cnc subscription work and how many computers can I put them on because I have 3 for lightburn and would like to do the same for any other program so I can grab any of the laptops I have set up to use the program.

@PawPawsWorkShop Жыл бұрын

LaserGRBL is only for the laser. Easel can run all the other CNC projects

@PawPawsWorkShop Жыл бұрын

The eagle file is part of VCarve by Vectric

@hugoramos496 3 жыл бұрын

Thats awesome! What Drill did you use?

@PawPawsWorkShop 3 жыл бұрын

1/8" ballnose

@hugoramos496 3 жыл бұрын

@@PawPawsWorkShop thank you sir. Keep up the good work! You're great

@bocus9001 3 жыл бұрын

hi can you please, kindly let me know how to wire z probe to touch plate you used in video ?

@PawPawsWorkShop 3 жыл бұрын

On the touch plate, you simply need to only add a screw to hold the wire to attached the wire. The second wire hold the slip. The opposite ends of the wires attach directly to the controller. On the Demon controller there is a labeled section to attach the two wires for the tough plate.

@bocus9001 3 жыл бұрын

@@PawPawsWorkShop thanks so much for your appreciated reply, unfortunately I use Arduino ramps1.4 not demon controller so can you help me to wire it to ramps1.4 😊🙏🙏🙏

@bocus9001 3 жыл бұрын

@@PawPawsWorkShop also I need to make same like u did in video I don't have touch plate but I'm looking for how to find minimum z point using alligator method you use but with ramps1.4

@ThatPain1 2 жыл бұрын

This is a really good tutorial! But one question: Is there a way to use your own created depth maps? (The greyscale picture)

@PawPawsWorkShop 2 жыл бұрын

Yes, you can create your artwork in a software such as Aspire or Fusion 360

@eitantal726 Жыл бұрын

If you don't want to buy aspire, You can convert the greyscale to a model with Blender. Export as STL, and import that as a model in VCarve

@cruftcreator 2 жыл бұрын

Great video. Is it possible to do 3d carves in easel?

@PawPawsWorkShop 2 жыл бұрын

the design will need to be done in another software such as VCarve or Aspire, save the gcode and you can send it to the XCarve

@MrLfarah 2 жыл бұрын

Hi. Sorry my terrible english. How i make this probe ?

@PawPawsWorkShop 2 жыл бұрын

I have videos on it

@markesselstynmiller747 3 жыл бұрын

What are the 2 CNCs in the back. I see the XCarve by Inventables what is the other one that you use? Did you carve the eagle on the X-Carve or the other CNC machine? Thank you.

@PawPawsWorkShop 3 жыл бұрын

The other cnc machine is the cnc4newbie new carve. Yes, I carved the eagle on the new carve. It could have been done on the xcarve just as easy.