Lets Bypass the RUN AROUND | Keep Your Pressure Washer Cool

Рет қаралды 17,422

2 жыл бұрын

Let's talk about and show you how to keep your pressure cleaner washer running nice and cool.
Always worried about how quickly you need to run back to your pressure cleaner or are you running long lengths of hose?
It's very dependent on each pressure cleaner, its features and limits. If it has an internal bypass run around and the motor keeps running, then there is a chance of overheating your unit.
Hope the following video helps you at home or within your business.
Parts Used
www.bluetongueindustries.com....
PH 1300 88 45 66
Check out all our videos: ‪@BlueTongueIndustries1300884566‬

Пікірлер: 30

@pe7146 2 жыл бұрын

Always great guidance and excellent serivice, Blue Tongue Industries!!!!

@artinconstruction9070 Жыл бұрын

Great videos, Very informative, & much appreciated !

@nelescleaning5669 Жыл бұрын

Clearly explained..thanks

@terminator1873 8 ай бұрын

What is that cross shaped piece called that allows that allows that extra connection with that hose to send the back to a tank

@rickbell814 2 жыл бұрын

I really need to do this to my pump still haven’t got around to it yet

@BlueTongueIndustries1300884566 2 жыл бұрын

Must do 👌You can adapt back to a garden hose to route in any direction.

@allinonepws Жыл бұрын

I’m new to this. Love the video. I have a 4 GPM / 4000psi pressure washer I just bought. How long can you leave it running without pulling the trigger if set up like this? I don’t like the idea of having to pull the trigger every 30 seconds to avoid overheating. Also, should I run this into a buffer tank or just let it go out onto the ground? Appreciate the help.

@BlueTongueIndustries1300884566 Жыл бұрын

Without bypass, to ground or back to tank around 5mins. With gun closed and a bypass to gnd or tank…all day.

@allinonepws Жыл бұрын

@@BlueTongueIndustries1300884566 Thank you! I’ll definitely be doing this.

@kfatbob1 Жыл бұрын

Could I do this on a AR RSV4G40 pump? Good content here and much appreciated.👍

@BlueTongueIndustries1300884566 Жыл бұрын

Any external bypass run around you can carry out this same procedure.

@kfatbob1 Жыл бұрын

@@BlueTongueIndustries1300884566 Beaudy !! I’ll give it crack if it lessens damage and overheating issues with the pump. Thanks for your response. 👌👍🇦🇺

@eugenedenny9119 11 ай бұрын

What about the first one?

@lbowsk 5 ай бұрын

Mine's internal. Bummer. Just learned about not letting the machine idle! I wonder how much damage I may have done. Oh well. ;)

@Will-tm5bj Жыл бұрын

I had a guy turn off the water the other day on me when he saw it just running out of my ball valve while I was walked away getting something. I need to do this lol. Thankfully I don't think anything got messed up. It might have been 45-60 seconds from seeing no water to the machine turning off

@BlueTongueIndustries1300884566 Жыл бұрын

Fingers crossed, all you can do is run the machine as normal. It was a short period you may be ok.

@Will-tm5bj Жыл бұрын

@@BlueTongueIndustries1300884566 I ran it for another hour or so after that so I think we're ok🤣

@666dualsport Жыл бұрын

cheers mate--- can you add a unloader-- bypass to a smaller machine that doesnt have one?

@BlueTongueIndustries1300884566 Жыл бұрын

You would need to look at changing the unloaded valve or pump replace.👍

@chilipalmer4691 5 ай бұрын

Hey mate is it possible to install an external unloader on an an internal setup? Whether this is replacing the internal or installing a secondary? Would love to see a video on this… I’m new to the industry and have purchased a $3500 pressure washer with an internal unloader on a Bertolini pump (I purchased the Typhoon T4000B) I’ve only just learnt about the importance of having a bypass and it would help me out a lot and im sure many others. Cheers

@BlueTongueIndustries1300884566 5 ай бұрын

Take a look here 👍 kzfaq.info/get/bejne/er1yls5qy9m6gXk.htmlfeature=shared

@jonboysprowash7845 Жыл бұрын

I just got a new 4040 pump. I’m not familiar with a bypass hose at all. My question is if I have it bypassed and running out on the ground will it not run the machine out of water? Either by being on the trigger or being off and it running out of the bypass hose.

@BlueTongueIndustries1300884566 Жыл бұрын

Your garden tap on all the time, so when your pressure gun is pressed all water to your pressure cleaning lance. When you release the pressure gun the water from the tap passes through the pump and drops to the ground. This bypass water on a skid mounted unit we usually bypass back to the tank.

@jonboysprowash7845 Жыл бұрын

@@BlueTongueIndustries1300884566 I agree. Back to a tank would be best. It just seemed if you had it running out constantly it would run the pump out of water. Thanks for the reply

@nelescleaning5669 Жыл бұрын

How can i modify my machine that has ' internal run around' setup?

@BlueTongueIndustries1300884566 Жыл бұрын

Easiest way would be to replace the pump.