Lian Li Dan A4 H2O - Full Build! (CLEAN)

Рет қаралды 144,984

Жыл бұрын

Chill and watch this PC build in the Lian Li Dan H2O ITX case with an RTX 3070 and an i9 10900KF!
Please comment with your questions and I will answer them.
This case is challenging to build in. You need to assemble it in a certain order to make it all fit right. I built in the case multiple times and found the best way to make it as clean as possible!
I’ve been busy with life, so videos have taken longer to make. Sorry for the wait!
--------------------------------------------------------------------------------------------------------------------------------------------------------------
-Specs:
CPU: Intel Core i9 10900KF
GPU: Asus TUF RTX 3070
Motherboard: Asus ROG Strix Z490-I Gaming
RAM: 16GB Corsair Vengeance LPX 3200 mHz CL16
PSU: Corsair SF750 Platinum
CPU Cooler: Corsair H100i RGB Platinum
Fans: 2x Corsair LL120 White fans
Storage: 1TB Crucial P5 Plus NVME SSD
Case: Lian Li A4-H2O Mini-ITX Case
--------------------------------------------------------------------------------------------------------------------------------------------------------------
-Temperatures & Benchmarks:
Rad fans exhaust, fans 100% (2500 rpm), pump 100% (2800) rpm, MultiCore Enhancement enabled (remove all limits), CPU ratio: AUTO, side panels off:
Cinebench R23:
-Multicore: 15768 @ 97°C
15 minute Cpu-z Multicore stress test:
-CPU temp: 94°C
More temps and benchmarks coming soon (I'm currently still testing)
--------------------------------------------------------------------------------------------------------------------------------------------------------------
-Music (in order):
1. Lakey Inspired - Better Days / apkb4
2. Yomoti - Before Chill www.epidemicsound.com/track/v...
3. Yomoti - Pineapple www.epidemicsound.com/track/0...
4. Mark Generous - Pure Chamomile • Pure Chamomile - Mark ...
5. _91nova - 5 Bands: www.epidemicsound.com/track/0...
Thank you to these artists for making great music!
--------------------------------------------------------------------------------------------------------------------------------------------------------------
-Subscribe for more content like this!
Thank you for watching!
--------------------------------------------------------------------------------------------------------------------------------------------------------------
-Contact me: subdubbin@gmail.com

Пікірлер: 138

@Subdubbin Жыл бұрын

Sorry for the long wait everyone! I will be uploading more often, so make sure to subscribe to see more builds!

@DariusAmir_ Жыл бұрын

could you possibly mount a bottom fan in this case under the gpu?

@Subdubbin Жыл бұрын

Maybe you could tape down a little 80mm fan in there depending on which graphics card you have. Not sure.

@xJinRaGna Жыл бұрын

Glad to hear, your build videos are so relaxing.

@errr9408 Жыл бұрын

@@Subdubbin In a few days I will also be making a4-h2o and I'm wondering if it's safe to run cables from behind the motherboard?

@Subdubbin Жыл бұрын

If it makes you uncomfortable, then don't do it. I have been doing it for years with no problems though!

@aifrmedia Жыл бұрын

The wizardry you pulled at 5:17 made me subscribe.

@DrDAC-go7hs Жыл бұрын

Thanks for the video, I redid my cable management completely with your guide. Looks great!

@noelphoea1453 Жыл бұрын

Love the cable management! Please do more builds

@Subdubbin Жыл бұрын

Okay I will

@min_kim 3 ай бұрын

I like your way hiding 8pin to the back of mobo. Best way i've ever seen!

@epictetus__ Ай бұрын

The best PC Build video on KZfaq. Wonderful presentation!!!

@decline.enjoyer Жыл бұрын

best case build video that I have ever watched

@BadM0j0 Жыл бұрын

I love the choice of background music. It created a much better mood for watching a build than techno music that some channels use. Good job on the build.

@BloodandMedals Жыл бұрын

Another great build as always

@markkennedy4055 5 ай бұрын

I love mine, Did a MSI Z790i, 13700K, I did however use a Phanteks AIO fewer cables to deal with and looks great too. PSU was Phanteks 850w that has the 12VHP port for the 4080 Founders card I used, less cable clutter. You did a fantastic job on your build, Thank You! 👍👍👍👍

@mh943t Жыл бұрын

Master of cable management

@blainearmstrong9587 8 ай бұрын

Very well done sir! My cable management is horrendous in my A4 H20 compared to this hahah I should’ve followed this video before I started building! Subbed!

@user-ko2ty5gm8z Жыл бұрын

I was waiting so much time!!!

@JUICEe36 Жыл бұрын

Great vid and build. I have a build in this case. Such nice and pretty straightforward in building in. Did take a while but I wanted it to be nice and clean.

@jacobbrown8561 Жыл бұрын

Great MiniITX build!!!

@stanleyvstheworld Жыл бұрын

"cable management" lmaooooo love the builds though keep them coming please we learn everytime 🤲🏾

@darthhokum Жыл бұрын

Perfect build 👍👍👍

@qegw4tn Жыл бұрын

I have the same case. It was too easy until i started mount water pump. 2 days of my life and build is completed. Nr200p one love anyway :)

@Subdubbin Жыл бұрын

It's not an easy case to build in. Took me a few tries to get it the way I wanted!

@touch-power Жыл бұрын

This is the best cable and tubes management in this case!

@touch-power 11 ай бұрын

I got my new case black LianLi A4-H2O. It is perfect. I am happy

@g8pk Жыл бұрын

Amazing work🤩🤩

@MrDutch1e Жыл бұрын

If this case held a 280mm aio I'd have it on my desk. Unfortunately I already had a 280mm aio when I moved to itx so meshlicious was my go to.

@SilverxXCrown Жыл бұрын

Thank you for that!

@LouisDuran Жыл бұрын

I like the size of this case, but dealing with the cable management mess and positioning the CPU cooler is a real PITA. I think I'll go with the CM NR200 instead. Thanks for making this video!

@alexhu4315 Жыл бұрын

I am also torn between these 2, how did the build go? Is the size difference noticeably big? Please do let me know!

@braaten4591 10 ай бұрын

@@alexhu4315 I have a NR200P, and will switch to a A4-H2O. Size difference is noticeably big when trying to fit in a bag/backpack. 18 liters vs 11 liters.

@apg-ev2ob Жыл бұрын

How did it work to wrap the power cable around the back of the MB, was there a safe are you were able to avoid to get it done easily? Also how did you manage to not have any power cables cramming against the GPU? (Just built one myself and I was not able to route anything easily).

@chrisbullock6477 Жыл бұрын

Hoping to get a new Ryzen build with this case. I want to down size on my new Ryzen B650E Mini Itx build for the winter.

@nienkun2753 Жыл бұрын

So sweet !!!

@cariocajpn Жыл бұрын

Nice build! Is it possible for you also share the PSU cable length? I'm thinking of building using the same case and PSU. Thanks!

@axseerkou Жыл бұрын

It is default Corsair SF750 cables

@lfnotmethenwho Жыл бұрын

this makes me wanna gut my h2o and redo the cables 😅

@chriskautz3245 4 ай бұрын

I just wish that there was silicone cables for the cabling. So easy to route and flexible . I may just make my own as there are now plenty of connectors on the market so that people can customise their builds further.. Just having 2 rgb fans and the sublime lighting on the card is enough for a pleasent lighting effect . TBH I hate builds that are full of RGB . Nice build keep it up

@hunterbramlage6044 Жыл бұрын

Good stuff

@mauricioletizio3107 Жыл бұрын

Awesome!!

@epkgeym3968 4 ай бұрын

this case is so good, maybe change side panels with mesh

@Enjoying-Life Жыл бұрын

Nice build. Curious with the intro song. Is that a default KZfaq theme as I heard it on almost 85% of any build video.

@Subdubbin Жыл бұрын

All tracks are always in the description on my videos! Opening track is Lakey Inspired - Better Days

@Enjoying-Life Жыл бұрын

@@Subdubbin I realized that but curious why every pc build video uses the same track? Should be called the official pc building track :)

@lucidreviews6809 Жыл бұрын

Do the fans come with the radiators?

@leeman949 Жыл бұрын

Do you build PC's as a hobby, or do you sell them? Overall, nice build.

@theking8yearsagoedited482 Жыл бұрын

Hello, nice build u done there. Got some question, im using the same case and my mobo is strix b660-i. I tried to copy your method for hiding the 8pin cable, but my backplate is slightly thicker and cause the mobo to lifted up abit, and when I try to tighten the screws it causes the mobo to bend. Did u bend aswell?

@Subdubbin Жыл бұрын

No, the motherboard did not really bend when I installed it. I spread out the cables width-wise so that they laid flat.

@theking8yearsagoedited482 Жыл бұрын

@@Subdubbin i think the problem is with my aio backplate which is thicker than corsair

@riomendoza1111 Ай бұрын

I want to build this so bad i think im gonna sell my macbook to start buying parts. This is so pretty and powerful. My dream machine

@plusfuture 7 ай бұрын

What direction is the airflow in the case?

@tinoRGC Жыл бұрын

Babe, wake up! New subdubbin video!

@andrewsmith4795 Жыл бұрын

What were the measurements for your 24 pin, pcie, and CPU power cables?

@iqcool 7 ай бұрын

I rebuilt my personal rig with both the same case and same power supply, so I can personally confirm that this person used the stock power cables that came with the PSU. The 24-pin is actually the perfect length for that case, the CPU power is a good length too (I routed mine a bit differently than they did in the video, but it's plenty long enough), and the PCIe cables it comes with are quite long for where the GPU is mounted. Personally, I went and ordered 2 8-pin power cables from CableMod for my build; I ordered 200mm lengths, but honestly they're still a little too long even at that length, so I'd get as short as 150mm 8-pin cables if you want to do this build yourself. Hope this helps even though I'm a little late :) EDIT: I checked the user manual for specific lengths of each of the included cables here: www.corsair.com/ca/en/p/psu/cp-9020186-na/sf-series-sf750-750-watt-80-plus-platinum-certified-high-performance-sfx-psu-cp-9020186-na#tab-downloads

@Brandon-ph7jr Жыл бұрын

Is it normal to have your 3070 to protrude to the left side like that as seen in 12:53? I have the same problem with my 3080 in this case

@youtubear02xdax Жыл бұрын

Only way out is to route your AIO tubes above the PSU instead of beneath

@pamkin001 Жыл бұрын

Q boss ? can you put hdd on this case if you have 3060 gpu ?

@thatoneasshat Жыл бұрын

Hey man quick question. I built a system in the same case and the little lock on the riser cable gpu side won't close. My gpu is fully seated and won't go any further. Any advice?

@Subdubbin Жыл бұрын

It should be fine since it's screwed down on the bracket anyway. Just don't drop the computer and it should be fine.

@thatoneasshat Жыл бұрын

@@Subdubbin awesome thanks for the quick response.

@vlmxs Жыл бұрын

Can you please explain, if you do not peel the 3M scotch at 2:25 on purpose and why?

@Subdubbin Жыл бұрын

Good eye! I left it on since the system will be taken apart soon, and I will most likely sell that AIO cooler.

@incrediblebulk92 5 ай бұрын

My SF600 cables do not bend that easily. I might need to order that premium cable kit. It looks so much easier with those.

@masterdftw4983 Жыл бұрын

The ITX master!

@djsalamat 4 ай бұрын

A4 H20 is thE best small factor case I found as of now, I wish it fit my ASUS ROG RYUO III 240 pump head

@hapyroots Жыл бұрын

Excelente 👌

@rizalkhoi Жыл бұрын

How is the temps? Is the 240mm aio enough for the i9?

@Subdubbin Жыл бұрын

GPU stays around 70°C during gaming. The CPU is around 85°C and noisy, so I wouldn't go with such a hot chip in this case. During benchmarks the CPU gets into the 90's quickly.

@therandomdot2563 5 ай бұрын

Would this still be a viable build for a VR gaming system today? Steam VR came out, and I experimented with it using one of my gaming rigs hardlined to my internet + Meta Quest headset. Worked really well. Ideally I'd have the gaming rig in my office space/room and hardlined to the router/internet there. But, idiot apt complex has the internet outlet only in the living room. I don't want a big-ass gaming rig sitting by the tv, and it looks ginourmous in our entertainment center. I'd rather have a more compact build and keep the gaming rig back in my office where I do singleplayer gaming on. So, was giving serious consideration to making a mini-ITX build to make a pseudo VR console gaming rig for the living room. I've got an RTX 3060 sitting around, so guessing I'd just need the rest of the parts. Just wondering if better mobos, cpu's, etc have come out that would upgrade this build to be better. (If the mini-ITX works out well, was thinking of also doing an RTX 4080 in it. Would that be possible in a mini-ITX? This is the first time I've ever thought of dabbling in mini-ITX).

@dodiauliareza4942 Жыл бұрын

Compact, no space left. Nice.. But as always, common question. How the temp Lol

@z4k1_zaki65 Жыл бұрын

From other ITX case reviewers like OptimumTech and Gearseekers, the temps are actually fine

@dodiauliareza4942 Жыл бұрын

@@z4k1_zaki65 Got it, i'll check soon. Thank's man 👌

@mrBytemare Жыл бұрын

I'm considering this case, but my GPU is 636mm thick... would it hit the sidepanel?

@AdroSlice 8 ай бұрын

What's that in slot width? I managed to fit a tuf 4070, which is a 3.15 slot card.

@PuffyWuzHere 7 ай бұрын

Why is it so difficult for me to place my gpu??!? Its even a smaller one and i cant get it to fit right in anyway

@MacheteStrikeR Жыл бұрын

Which is better - Lian li Dan A4 or CM NR200P ? =)

@LiteTM Жыл бұрын

Did you use stock PSU cables? or custom

@Subdubbin Жыл бұрын

Stock SF750 cables

@vlmxs Жыл бұрын

By the way could you please tell why you chose Corsair AiO? Would you consider some other options, if so which ones? The pump block appears to be very bulky in such a tight place, but you placed it perfectly!

@Subdubbin Жыл бұрын

I liked the look of it and found a good deal on it used. I tried an EK 240mm AIO since everyone uses those in this case, but I couldn't get it to look clean in the case, and the RGB fans didn't function properly. I would suggest getting the EK Basic 240mm AIO however.

@ccc538 Жыл бұрын

MUSIC . GOOD !

@nottsoserious 4 ай бұрын

i9 and 3070? What are you using this PC for with such a high CPU requirement and a weaker GPU?

@raflyakbar7532 Жыл бұрын

bro do you have problem with riser cable on Lian Li Dan A4 H20? cos my build have that problem..

@Subdubbin Жыл бұрын

What is your issue?

@raflyakbar7532 Жыл бұрын

@@Subdubbin my gpu can't read when i use riser cable (black screen), but when im plug in gpu directly to motherboard it's working...

@z4k1_zaki65 Жыл бұрын

@@raflyakbar7532 Have you tried manually changing the pcie gen in your bios? Works for me when I change it to Gen 3

@raflyakbar7532 Жыл бұрын

@@z4k1_zaki65 okk let me try it, hopefully it works

@RandyDwiPrasetyo Жыл бұрын

Which one do you prefer personally? H2O or Q58?

@Subdubbin Жыл бұрын

H2O

@SkateClipsAndTips Жыл бұрын

Man I would have 0 patience with these compact builds, you really have to be perfect with wire placement

@SkateClipsAndTips Жыл бұрын

Turned out nice in the end though :)

@giopagtalunan8762 11 ай бұрын

Is it possible to use fans only and not radiator

@AdroSlice 8 ай бұрын

Yes, but air cooling clearance for the CPU is very tight in this case, I wouldn't recommend it.

@rb14963 10 ай бұрын

The corsair AIO has just too many cables, a simpler AIO maybe deepcool LS520 will choose this case better.

@sarowarhossain230 Жыл бұрын

brother can u tell the gross weight of this build????

@randomhobbyist99 Жыл бұрын

Looks like you have a little sticky friend still attached at 2:26.

@iisha67iiksa10 Жыл бұрын

It's great but complicated 🙂

@calvinholloway3802 5 ай бұрын

I want to do this bill with the 4080

@wannabeme7206 Жыл бұрын

Nice build.. my dream build... can I have it?

@qamhafiz Жыл бұрын

A4 h2o or nr200 ? Which one you prefer ?

@Subdubbin Жыл бұрын

NR200

@comenter-nz7dp 11 ай бұрын

I am going to need 1 of thouse for school soon rip pocket.

@TheKiTler Жыл бұрын

can this case fit the 4000 series from nvidia?

@adimw Жыл бұрын

322mm max

@Eric_Japa_ Жыл бұрын

this case should be hot asf

@mclarenproject6455 Жыл бұрын

How is that possible to have a so fast windows boot time ?

@Subdubbin Жыл бұрын

The magic of video editing!

@joescalon541 Жыл бұрын

I wanted a case this side and was going to wait for the A3-mAtx. Then I decided I want a full size psu and no riser cable. So I design and 3D printed my own case. Great build though.

@calvinholloway3802 5 ай бұрын

I’m doing this build I’m looking for 480 that fits can anybody help?

@FerchumanX86 Жыл бұрын

🤩😍

@TheForzaLove Жыл бұрын

Im building the same thing except with a 3090 FE do you think it will be hard to fit? (its my 2nd time building a pc)

@Subdubbin Жыл бұрын

It should JUST fit. Max GPU length for this case is 322mm. 3090 FE is 313mm.

@therandomdot2563 5 ай бұрын

I thought porn was banned on youtube. I'm gonna need a cold shower after this.

@clertonsantiago 8 ай бұрын

I would really like to know why the insistence on using a split jack on the panel, what is the purpose of this if practically any gaming headphone has a USB connection and if it happens to be 3.5mm, they all come with their own split jack. What ends up happening is if you are going to use a P3 headphone you will have to use a split jack which in itself is mediocre, imagine in a case that costs 200usd.

@MrGaming-bz7ww 10 ай бұрын

Building such a nice ass gaming machine just to play forza & Warzone

@insertnamehere4419 Жыл бұрын

Gotta love videos where you just mute the sound. I guess?

@user-qv5oq9gv9v Жыл бұрын

xbox killer

@careditor 11 ай бұрын

I am sold, i watched the entire build. I want SFF for my semi truck. Only would like a 4 Vram slot motherboard and plenty of rgb like a nightclub. Any suggestions?

@voodooactual8053 Жыл бұрын

ITX case builders have a problem... With these new GPUs, the cases will no longer be abled to be classified as ITX cases since they're going to have to be much bigger.

@drill_fiend1097 Жыл бұрын

Someone said FE4090 may fit. I am still waiting for their review (because they are putting it in here) before I buy one and switch from NR200...

@muhammadsalman7714 Жыл бұрын

Looks great case but itx is too cramped😊

@lukasjnr7962 Жыл бұрын

Not a fan of the H20 case

@hmst5420 Жыл бұрын

What an ugly usb cable corsair uses to power the pump. God. Looks like they can't afford a custom one instead of this ugly oem cable.

@wolverine3134 Жыл бұрын

пылесборник

@Zediaphh Жыл бұрын

why are you putting a 10th gen i9 in a new PC in almost 2023, waste

@Frosty-px1yq 3 ай бұрын

Thermals

@user-dt6et3vm4g Жыл бұрын

Да там внутри всё сжарится

@cokeforever Жыл бұрын

So, you are liquid cooling only the cpu? )) What is the point? In most games, gpu is the only component to get hot... this "build" is rediculous

@z4k1_zaki65 Жыл бұрын

Lol, imagine spending another $1000 bucks on water cooling part…. His money his choice, plus the gpu temps in the H2O is decent enough

@cokeforever Жыл бұрын

@@z4k1_zaki65 What?? AIOs come with double heat exchangers (cpu + gpu) these days, and they cost more like 100$... wtf r u talking about?!

@z4k1_zaki65 Жыл бұрын

@@cokeforever Name me 3 brands that sells it globally (Not including those Chinese brand, Barrow & etc)

@F83.M4 Жыл бұрын

What a dumb comment. Learn to speak English before you call someone out.

@AdroSlice 8 ай бұрын

@@cokeforeverHe chose the AIO, as most people building in this case do, simply because air cooling the CPU isn't really great in this case, it's designed for this kind of configuration. A dual block AIO might work but you have to consider how difficult it would actually be to fit in this case. Even a custom loop might do better in this. AIO CPU + Air cooled GPU is a proven combo in this case and yields good enough thermals.