Back in early 2000's removable motherboard tray is a must for premium cases, thankfully this trend is back.

I've seen several big channels making reviews on PCs etc. but yours are always the best. Pleasure to watch pointing out all the details. and I appreciate the quality of camera/post production and good vibe. I know it's a lot of work. 🙏

I do love case comment sections, people's preferences are so varied in this regard, from itx to rgb to tower sizes. People really don't centre around one idea and the variety is great to see.

Thank you for sharing your build with us again, they always look so clean & you made an amazing choice in the black build with the CPU air cooler, they are so under appreciated. Keep up the good work!

My first lian li case and im very impressed with how well thought out this case was put together

That white build is beautiful!

Lian-Li did an incredible job with the cooling potential of this case as it's all glass and almost competes with the Torrent for temperatures; amazing

Thanks for another great video Chris Pratt :)

Der8auer...look what you've done. They can't stop.. You did this. You've created a monster.

Definitely nice. Will be buying!!

Great video, love the detail about cable routing and I do see the value in using an RTX 2060 for consistancy cooling wise but there needs to be a test for a modern card too (4080 or 4090) tested for temps as well as how it fits in the case. So many things have changed with GPUs now that testing a modern card is basically a requirment for a new case review.

THAT's the case my wife's getting for Christmas! The decision has been made! Thanks, Dmitri.

wow that case is amazing

Finally somebody shows this case in a full video

I want to have PCMR version of the Evo XL. I do like the vision but I need more cooling. I have 2 different cases that have mirrored tempered glass panels the Corsair Crystal 570x SE and the OG O11 Dynamic with the PCMR collab and mirrored effect adds so much. The whole inside is dark and all you can see is your reflection but when an LED lights up is sticks out and pops through the glass only allowing itself to be seen as the interior is really dark from the outside except the areas where LRD's are shining through (unless you have a lot of lighting) ALSO would like to know if the top panel is cross compatible with any other Lian Li O11 series case such as the Evo because if it is I can just swap out the top panel with one from an Evo case as I do really like this but my current PC is a little lacklustre for cooling even though I have 9 case fans (3 of them with an AIO on top and 3 on the motherboard side). I am planning a build sometime next year and if I can get another Lian Li O11 with Mirrored tempered glass AND space for 9 or more case fans (without being stacked) then it would be awesome The only problem with mirrored tempered glass is exactly what Dmitry said at the start you need a microfiber cloth and a spray because fingerprints stick out a little more due to the fact that the case is not entirely seethrough and it is shiny on top so smudges and fingerprints start to cover those perfections on the glass but for me as long as I don't touch my glass side panels which I usually do not do on purpose unless I am taking them off and when I do take them off I clean the inside of the panels and then attach the panel from holding the front and sides only then after that I clean the outside of the glass. I just use window and glass cleaner and a microfibre cloth which works well on these glass panels. Anything such as Windex should do (I don't live in the USA or Canada and live in the UK and we don't have that but we do have something comparable called Windolene which works well for this task) but when using glass cleaner I ALWAYS make sure to NEVER spray the case in case I accidentally get some inside the PC on to a component (I don't know if these sprays can short out the components but I try to be extra cautious) and I spray the cloth itself then wipe the panels

This is beautiful and i saw a preview of it from footage of what? CES? But wow. Want

Hi! Very nice Black build. What is the Teamgroup T-Force RAM model that you used? With the orange RGB? Thanks.

What was your fan configuration for the white build? And were you using the reverse blade fans from Lian li for the fans to all face the same way?

Hi i’m new to your channel but loving your content! I’m currently building my first pc with this case and am a bit overwhelmed with the cooling and what all I need.. I have a 4070 Super paired with a 7800x3d and am looking to keep it air cooled.. How many total fans of which sizes would I need for this setup? Thank you

I hate the peel ;( I always want to keep it on everything as long as possible. The opening of the video killed me! Thanks for the review!

I NEEDS ITT

I'm planning a custom watercooled build later this year and am torn between this and then the O11D Evo RGB, which would you consider to be the better case in that regard? :D

Now they just need to create TX versions of these 🤤

The black build you did is so SEXY! With the white I would love to see the RGB set to a light electric blue, love that "chill" look.

I just wish Lian Li would offer more case color options, like Blue Lian Li!! So over white and black options, I custom painted my O11 Evo last time, it was a lot of work!

This Vision looks beautiful, the problem is the dirt on the glass walls, I have the 011 Dynamic and I already think it's beautiful. I'll consider moving on to this one. But I have a panic about dust and my finger is always cleaning the internal parts. Now, please tell me the configuration of this black machine, which fans, which motherboard, and which cooler you are using and processor. I have a Lian Li water cooler and I want to go back to the air cooler, I'm going from a 10th processor to a 14th with DDr5. Thanks in advance

Why is there no dust-filter for the 3 side intakes??? Did you test a bottom in, rear and side blow out config?

i've never seen a case that looks so cool to display in theory, yet so nightmarish to own for how much cleaning it would take to actually display it (i still await for the return of Sideways focused cases, let me have a flat boi)

Does testing the temps with the fans at 100% make sense for most ppl?

nice intro with the music

Great review. Sadly everyone shows the case with the infinity mirror fans from lian li in the all out config.. because they look better that way. Are the tthermals ok, running like that? would this be doable? i ordered this case and the aio. so i'd love to mount it like that

I am planning to buy this in black. In the video I saw the side fans are set to outtake, but in the test results you write intake. So what is recommended. Side fans out- or intake? Thank you

Beautiful!!! Would love to see a water cooled build!!

is the coming RGB version bigger? waiting for that one i think

although it is really beautiful, it still is massive case and I still prefer the size of my Meshlicious. I might buy this beauty if there there is an ITX or even mATX version which is smaller.

I just ordered the black version 😁

i think if i bought this case i would do three intake on the bottom, and a 360mm exhaust rad on the side for even airflow with a mini LCD display in the back for hardware. Afterall this case goes for looks.

Uuugh still can't put a 140 in the back, is it really that difficult for them to make a reasonably sized dual chamber case support a 140 in the back? Like, for real, is it a design/mechanical limitation?

my gf bought me this case and im in love with it.

i hope O11D mini vision will come out

This is nice but i do like the dynamic evo a little more

can da vision be inverted like the evo model ?

I wonder if they are going to make O11 V XL

I wanna see the evo rgb to finally decide which case I’m switching to from the o11d mini, it’s my fav case by far but these GPUs are only getting bigger and bigger and kinda wish they revisited it with smaller bezels and a slightly bigger design to accommodate bigger GPUs to future prof for a bit

Unless we ever get to the stage where every cable is somehow possible to be hidden completely, I really don't mind some cabling around. It gives it that engineering "yes, this is technology" look.

I want to know what happened to the mirrored top panel. Definitely made it look nicer

you better have tons of clean microfiber wipes laying nearby

Showcasing is cool for a week then you get bored. I will always choose a case based on temps and low noise floor before looks.

Is there a parts list for the black PC in this video?

bro i missed the newegg restock last night :(

Do we know what the temps would be with 1 exhaust fan in the back with 6 intake ?

would love to see this unit coming with a mirror top glass panel option. it was shown at computex but not with this case? baffling

Can you buy a white model with tinted glass?

Is there a stock fan with this?

Little Debbie called. She wants her hair style back

if the cpu rad is an outtake fan setup then why not make the rear intake fans and make use of those open honeycombs

EVO is the way to go

Does anyone know if the you could fit the EK DistroPlate from the O11D into the o11 vision i think a full custom water loop with distro plate can look amazin in this case.

Hi Dimitri, did you guys review the XL version? I did look but unable to find it..... Thanks.

Very nice, but the Phanteks NV series are the cases to beat this year.

i saw 011 mini vision

Please make an XL version of the vision.

Wondering how it would look like with 6 3.5" hdds

Rodney Reynolds' new favourite case. 😅

so this is like thermaltake open case but with glass

what type of ram are those can i get the name of those rams?

Wait i can't find what is the maximum psu size the o11 supports

Someone needs to sandblast it or they need to make a frosted glass one because that's the only way I'd do a whole RGB build.

Can this case fit with noctua nhd15

It's cool, but at that point, why not just get an open case like the Core P3 from Thermaltake? It has a glass panel too, but I took mine off. Don't need extra fans either.

Wait, so they didn't keep the mirrored glass on the inside of the top panel like at Computex? :(

Unimpressed until it's made 100% of glass. No vents.

oh they didnt ship it with the mirror glass???? OOOF that was advertised

lian li never disappointed their user

I have the O11 XL and it is a dust magnet.

currently have O-11 XL but Im sooo tempted swapping to this

NV7 with only 3 fans in that table?

Does this fit a RTX 4080?

Going for all this glass in PC can we at least drill proper holes in the front

ahhhh you made me gu gu

Aquariumm🤤🤤

That would be a beautiful water-cooled custom loop case

Can U fit a vertical GPU and ATX motherboard with the Lowmode ?

I can't seem to find on the website any info on gpu clearance. Am I just not looking in the right places?

Watch this become a literal glass box

All it needs now is some fish

Looks like a Fish Tank.

I dont like the direction cases are going in, more fan spaces are always welcome, who needs more and more panels, i would like a case with a mesh panel next to a gpu to give it fresh air

This is a nice case, but im over 011's. I built 3 of em already, even an air mini. I cant even look at em anymore

Dumb question but will the case handle my 5kg cat sitting on it?

What's the point with the bottom filter when everybody is going to face the fans so they blow out?

Just remember, when it's time to maintain your PC, you're going to hate it.

If you drop that case it's all over

PCMR edition means mirror finish on the glass. Hope we see a true version for this concept

how much of a beating can the top panel take? my cats love so jump on my pc and sleep where.

aquarium case

I wanna like it but I don't like it. I'm a more function over form kinda user.

The short skirt case.

Will look cool if everything is cooled with water and using hard tube/soft tube Makes me wonder how the thermals will be if its air cooled both the cpu and gpu

Pratt😂