Lian Li O11D Evo RGB deep dive with various build layouts!

Рет қаралды 108,130

6 ай бұрын

Prawn here with a detailed look at the Lian Li O11D Evo RGB. In this video I'm showing you all the different things you can do with this case as well as the things to keep in mind if you're buying and building. I am going to craft a detailed in-depth build guide on the Lian Li O11D Evo RGB soon, so subscribe to see that if you haven't already.
The Lian Li O11D Evo RGB is an upgrade to the Lian Li Dynamic Evo which features some nice improvements for customising your case as well as visual highlights such as the removable support bracket and RGB lighting strips.
Related videos:
Lian Li O11D Evo RGB vs Evo XL vs Dynamic Evo • Lian Li O11D Evo RGB v...
Lian Li TL120 LCD fans - • Lian Li now has Uni fa...
I upgraded my Lian Li Dynamic Evo • I upgraded my Lian Li ...
I made some mistakes with this Lian Li O11 Dynamic EVO build • I made some mistakes w...
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Specs of this build (Please note links listed here include affiliate links which may earn me a commission.)
Motherboard - MSI MAG Z790 Edge TI Max Wifi • MSI MPG Z790 EDGE TI M...
CPU - Intel Core i9-13900K CPU amzn.to/3Ry7UAl
RAM - Corsair Vengeance RGB DDR5 16GB x 2 6200MHz (go.corsair.com/eKAL3Z)
NVMEs:
Corsair MP700 Pro NVMe - go.corsair.com/eK2g5D
Case - Lian Li O11D Evo RGB ( • Lian Li O11D Evo RGB d... )
PSU - Kolink Regulator 1000W PSU ( • Kolink Regulator PSU s... )
CPU Cooler - Lian Li Galahad 2 LCD SLInf • Lian Li has an AIO wit...
Fans - Lian Li TL120 and TL LCD • Lian Li now has Uni fa...
GPU - Gigabyte RTX 4070 Ti 12g OC • Gigabyte RTX 4070 Ti 1...
SSDs - Crucial MX500 2TB and Crucial BX500 2TB • How to install 2.5 inc...
Alternative parts:
Corsair iCue Link System and QX Fans - • Corsair iCue Link Syst...
Corsair iCue Link LCD upgrade - go.corsair.com/21eMez
See deals on the Lian Li O11D Evo RGB
New Egg - newegg.io/ncb99c1264
Overclockers - tidd.ly/47WPVL3
Caseking - tidd.ly/4at6u2K
Amazon US - amzn.to/3RQz2vW
Amazon UK - amzn.to/3TySSwR
Amazon FR - amzn.to/48aLXhZ
Amazon IT - amzn.to/3v5Dez8
Amazon DE - amzn.to/3NFz2ML
Amazon CA - amzn.to/3TEgtwt
Optional extras:
EVO Upright GPU Kit lian-li.com/product/o11de-2/
O11D EVO Additional I/O Kit lian-li.com/product/o11de-3/
Vertical GPU kit - lian-li.com/product/vg4-4/
Specs of this case include:
Model O11V EVO RGB
Case Type Tower Chassis
Dimensions (D) 478mm x (W) 290mm x (H) 471mm
Color Black / White
Material Steel
4.0mm Tempered Glass Aluminum
Motherboard Support E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX
Expansion Slot 7
Storage
Behind MB Tray: 2 x 2.5” SSD
Hard Drive Cage: 2 x 3.5” HDD / 2.5” SSD
Side Fan Bracket: 2 x 3.5” HDD / 4 x 2.5” SSD
GPU Length Clearance 455.7mm (Max.)
CPU Cooler Height Clearance 167mm (Max.)
PSU ATX (Under 220mm)
Fan Support
Top: Up to 3 x 120mm / 3 x 140mm
Side: Up to 3 x 120mm / 3 x 140mm
Bottom: Up to 3 x 120mm / 3 x 140mm
Rear: Up to 1x 120mm
Radiator Support
Top: 360 / 420 / 240mm
Side: 360 / 280 / 240mm
Bottom: 360 / 280 / 240mm
I/O Ports
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type C
1 x Audio
1x Color Button
2 x Mode Button
1 x Brightness Button
Dust Filters
1 x Bottom
🏆Big thanks to my super awesome KZfaq members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Mike S, Jay Shank 007, Jason Morgan, Starastin, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson, Lank Wimb, Bhushan Mahesh Gandhi, Roburrt, isgursoy, Beaster Bunny, spandauguy and Gaming Nomad.
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - the-provoked-prawn.creator-sp...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with amzn.to/3kYrhGP

Пікірлер: 192

@TheProvokedPrawn 6 ай бұрын

Specs of the build in this video (Please note links listed here include affiliate links which may earn me a commission.) Motherboard - MSI MAG Z790 Edge TI Max Wifi amzn.to/41yjPmh CPU - Intel Core i9-13900K CPU amzn.to/3Ry7UAl RAM - Corsair Vengeance RGB DDR5 16GB x 2 6200MHz (go.corsair.com/eKAL3Z) NVMEs: Corsair MP700 Pro NVMe - go.corsair.com/eK2g5D Case - Lian Li O11D Evo RGB (kzfaq.info/get/bejne/mZNgirponMXKfWw.html) PSU - Kolink Regulator 1000W PSU (kzfaq.info/get/bejne/qdB1fdWdl5-YnX0.html) CPU Cooler - Lian Li Galahad 2 LCD SLInf kzfaq.info/get/bejne/idqoZNyk2byth5s.html Fans - Lian Li TL120 and TL LCD kzfaq.info/get/bejne/nLJkqLyer9zSqpc.html GPU - Gigabyte RTX 4070 Ti 12g OC kzfaq.info/get/bejne/lZOSqJmiqdfJh3U.html

@deyvidortiz9676 8 күн бұрын

i hope you can reply to this I'm currently trying to build a pc with the MSI MEG X670E GODLIKE and i don't really know if the lian li O11D EVO RGb will work for this

@KISS_MY_CONVERSE 3 ай бұрын

that puppy is CLEAN... I'm gonna buy that case.

@Rad_Pug 5 ай бұрын

I get this case next week. Still trying to figure out some of the other components. A distro plate is very intriguing. Nice video.

@diana.winter 5 ай бұрын

A few notes on the case from my own experience: A 420mm crossflow radiator almost but doesn’t quite fit in the top. A regular 420mm does work with the motherboard in the lower position, but that makes cabling more difficult, so I feel like a 360mm with the MB in the upper position makes the most sense. Likewise, a 360mm crossflow in the side bracket *might* be possible but probably not worth the tradeoffs for most builds. The vertical GPU mount needs its own anti-sag device to avoid deforming the back of the case when using heavy cards. In the lowest position, you might get away with a shim between it and the bottom fans. The riser cable on the vertical mount is also too long unless it is mounted in the lowest position and the motherboard is the upper position. Otherwise, the ribbon is either pressed up against the backplate of the card or the heatsink for the chipset/VRMs. The cable management door does not close completely when using larger PSUs. The side panel still fits overtop, so it isn’t a dealbreaker, but worth mentioning. The drive cage area is large enough to support a pump/res combo like an FLT80, but the mounting holes are slightly too narrow for a standard 80mm mounting bracket. Only an issue if you want a triple rad loop without a distro plate covering the front panel or a pump and reservoir blocking your view of those sweet LCD fans. Not the case itself, but related: I tried the strimmer RGB cables and while I want to love them, I don’t think they work in this case. The 12vhpwr cable needs a right angle connector to avoid potential bending issues with the side glass and the 24-pin cable is way too long. I could just about plug it straight into my PSU if it had the right connector, but as it’s an extension cable, it just makes cable management that much harder.

@lukestivala 5 ай бұрын

So the strimmer RGB 12vhpwr is tight with the Temp glass panel, what version did you use and did you try it on an nvidia 40 series or AMD Card ? Im asking because Im waiting (to purchase) for the release of the 4070ti super card (in 2 days) and this case.

@stevedillinger8642 5 ай бұрын

So does a 420mm artic aio fit with rad on top?

@user-lc3ps5mg5v 5 ай бұрын

@@stevedillinger8642As far as I understood, if you put the motherboard on the lowest fastener, then the Arctic 420 will fit

@SarKo-4 6 ай бұрын

Well I am happy to say I will be buying this case. I will also be getting the new lian li 120 tl lcd reverse blade fans as well.

@Pheonix_GamingYT Ай бұрын

ur bank accounts definatly not 💀

@Stigness23 6 ай бұрын

Preordered mine today, cant wait. Im hoping they release the piece to let you move the USB hub to the top of the case like the previous EVO

@venomvenom6971 6 ай бұрын

I think what makes this attractive would be for left handed setup and the seamless perpendicular alignment between the glass panels. Much like the nzxt h9 flow but with the choice for it to be on the left side. Rgb wise would be more of an add on to the rgb lovers. I personally prefer this over the original o11d mainly because of the seamless glass panel intersection.

@Ren_1106 4 ай бұрын

the good thing about this O11D EVO RGB is you can remove the pillar and become the fish tank.

@focibc 2 ай бұрын

Fanatic content and really I appreciate some cheeky b roll shots!

@YouMadBr0Br0 6 ай бұрын

Beautiful builds! 😍😱

@TheProvokedPrawn 6 ай бұрын

Thanks

@daviddesrosiers1946 6 ай бұрын

Some curious differences between this case and the original O-11D Evo. I like that they made more room in the cable bay. It's one f my few gripes about the Evo. If you have a lot of cabling in your rig, the cable bay of the Evo can become rather cramped directly behind the PSU, especially with PSUs above a 1000W. I like how Lian Li extended the RGB on the sides of the fans all the way to the edge, unlike the original SL INF fans.

@Duncan4president 2 ай бұрын

Awesome video thank you!

@TheProvokedPrawn 2 ай бұрын

Glad you liked it! Hope you enjoyed enough to subscribe 🦐

@TheACCHRM Ай бұрын

Buying a build using this case tomorrow for a full ALL WHITE build! Lian Li EVO RGB, MSI MPG Z790 Edge Wifi, i9-13900k, 4080 Super, can't wait !

@TheProvokedPrawn Ай бұрын

I made a build guide 👍🏼 kzfaq.info/get/bejne/gsCqZdiZv6e7qok.html

@fufnerkeywheel1329 2 ай бұрын

Nice vid thx. Just bought it in black.

@TheProvokedPrawn 2 ай бұрын

👍🏼 good luck

@kamerontranter1169 4 ай бұрын

fantastic as always the lian li expert as i tell my friends one question the radiator you used i see them its a LIAN LI GALAHAD II LCD 360 SL-INF COMPLETE WATER COOLING, ARGB but did you replace the fans as i like lian li uni lcd instead if you get what i mean as i rather have the outside lighting then the fan itself lit up

@jonathanlopez3315 8 күн бұрын

Thanks I'm about to copy this build

@TheProvokedPrawn 8 күн бұрын

Good luck and enjoy

@m1troska 4 ай бұрын

A video about how to invert this case would be very nice

@MsabResearch 6 ай бұрын

Those are some great alternatives for this build, thanks for sharing mate! Lian Li O11 has loads of potential, although I personally prefer the NV7 from Phanteks.

@TheProvokedPrawn 6 ай бұрын

Fair enough! Thanks for watching!

@TheWandererVT 6 ай бұрын

I was going for the vision at first but after seeing more "showcases" of the Evo RGB, i'm definitely going for this one for my new build. Now i'm having a self debate to decide wether I send back the iCUE link h150i I ordered and get a lian li Galahad ii (lcd or not), or a cheaper aio + TL LCD fans 😅

@Cairam0101 4 ай бұрын

So what have you decided?

@cheezyjokester 21 күн бұрын

I just bought this case to replace my Lian Li Lancool II. It sucks in so much dust through the front I am constantly cleaning it and the radiator in the front. No dust filter means a ton of dust and I was at my whit end. This is going to be exciting not to mention had it reversed since it sits on my left.

@wiIdcattm 6 ай бұрын

If I didn't just brought the Dynamic a few months ago, I'd buy this one. Particularly because I have to my system in the reverse built due to where my desk is, but the reverse built with a 3090 is uncomfortable too close to the motherboard because my motherboard is a tad bigger. This latest incarnation of the Dynamic seems to address that. Unfortunately, I have a rule of thumb not to buy a new case for a couple of years. If someone told me they'd give me this, though, I'd be all over it.

@brad_t 6 ай бұрын

Thank you for the very in-depth review of the case! You mentioned that you can do a push/pull orientation on the top fan/rad mount. Is it possible to do that on the side intake? Or only the top? (Not push/pull on both at the same time, but one or the other)

@TheProvokedPrawn 6 ай бұрын

Yep shouldn't be a problem. You can do that with most Lian Li cases. Interestingly they also point out how you can put fans at the rear on that tray if you upright GPU mount there, so that gives you an idea of how much space there is.

@brad_t 6 ай бұрын

@@TheProvokedPrawn thank you for the response! that is good to know. probably will preorder the case soon! can't wait to see the full build video and hooking up the rgb! thanks again!

@UhYoUaReDeAd 6 ай бұрын

Hi, love your videos, just built my own Lian Li monster. Problem is I got the GA II LCD non inf version but bought some INF fans and installed them on the rad and on the controller at the back. Using a 7800X3D im getting some really shitty temps,just sitting around in windows doing tasks and it hits 70C. Should I repaste and reseat the pump or is there an issue since the cable going on the pump doesnt have any fans on it. I'd really appreciate your input!

@TheProvokedPrawn 6 ай бұрын

Hmmm. In L Connect you can set a fan curve for the fans that changes according to the CPU temp. If you remember the port they're connected to you can set them to a higher speed than the rest of the fans. Also I've found that having intake fans on a radiator can make quite a difference. kzfaq.info/get/bejne/qbx1i8devNacdo0.html

@Dragonytez 4 ай бұрын

6:30 Thanks for saying this. I was driving myself nuts on how these trays wouldn't negate the fans / radiator on the other side. I was looking for some sort of other purpose to them, but I guess I just have to leave them off.

@ArtFiendz 5 ай бұрын

incredible. I'm going to be building my daughter a PC in a month or so and she likes my current lian li o11 dynamic so I'm going to swap my build to one of these. I hope they aren't sold out at that point. lol. I'm actually really stoked for this case

@TheProvokedPrawn 5 ай бұрын

Have fun!

@ArtFiendz 4 ай бұрын

@@TheProvokedPrawn I ended up just buying it and already swapped it over. Went from a white to a black and it looks incredible. It was really a joy to build in. I have one question though. Is that flat metal piece that comes in the anti sag bracket box needed while using the one you installed in the video? Or can i just leave it out?

@TheProvokedPrawn 4 ай бұрын

@@ArtFiendz the anti sag bracket has extra parts for eatx motherboards. So if you have atx like me then it's fine

@ArtFiendz 4 ай бұрын

thank you!@@TheProvokedPrawn

@wankerka 5 ай бұрын

I would buy this over the vision and XL evo. Mainly the evo rgb suports 140 fans,top ,side and bottom. And almost same size as the original evo which i really like. Still rocking my haf 700 berserker :)

@jielibai2912 6 ай бұрын

I really hope the old evo front mesh works for this evo too.

@TheProvokedPrawn 6 ай бұрын

They've got a panel specifically for it I believe i.e. a new one

@Cozychamomilleaddict 6 ай бұрын

Hi nice video! - Do you know if MSI has a mother board like the one you showed with all the sick RGB but supporting 14th gen processors? Also I’m building my very first gaming pc and want it to pretty much look like the one you show in the video 😎 Just subscribed!

@TheProvokedPrawn 6 ай бұрын

Yeah this one will work with 14th gen. Specs in the description

@NsureU 26 күн бұрын

I’ve got a custom build from ek fluid I bought used and it has an older version of the lian li case. You know the main differences? Main thing I don’t see the radiator/ fan trays removable, the corner bracket cannot be removed. I’m looking at grabbing one of these to swap everything over 😊

@MrBeeMeR320D 2 ай бұрын

I am gonna buy this case with all the lian li fans needed, but i noticed on my local shop's site that the AIO cpu cooler with the bigger lcd screen is the SL and the other fans are TL. In your builds also, but they seem to light up the same? Where as on that site, the AIO shown has leds that shine/glow differently (more on the blades itself and not on the sides like the TL's)?

@zodiachild36 4 ай бұрын

Are you able to do a push pull AIO configuration on top of the case? I can't seem to figure it out. A response would be awesome. Thank you in advance brotha.

@daltonw170 2 ай бұрын

I'm fixing to build my first pc and I was wondering do I need reverse fans or can I just use regular fans ? And which fan is which in that case

@xXEPIKgamerXx 6 ай бұрын

If it weren't for the price difference I think this fill the same niche but just straight loses to the regular EVO XL considering the XL has an extra rear exhaust, convenient removable mobo tray, bigger IO, Vertical RGB that this case conveniently lacks, and ability to offset the bottom intake fans without the GPU brackets getting in the way when using 140s. For closer to the same price Id rather get the Vision which albeit not perfect itself, looks just as good in its own unique way and requires less fans ($+100) for similar air cooling performance AND the case/tempered glass doesn't obscure the INF mirrors even if they aren't symmetrical which is really the most important part if you think about it ;) EDIT: also apparently no dust filters? that's a pointless removal of options to save a quick buck if so.

@Turbotef 6 ай бұрын

Yeah, I'll be going for the XL myself as I've been tired of building mid-tier tower builds with my large hands the past 10+ years. The extra wiring space and removable MB tray just makes it that much better.

@KingKxizen 6 ай бұрын

literally stuck between this and the vision, does the vision also come with the standard anti sag bracket?

@TheBalaskas Ай бұрын

11:49 In the reverse chassis build, are the fans flipped upside down too not just the GPU? Planning this build and getting a Lian Li LCD fan, but if it's flipped it doesn't have much use then sadly...

@DisproportionedMalcontent 2 ай бұрын

Great job on all your videos. I was surprised and disappointed to find that the white RGB cases come with black anti-sag brackets. Particularly because of the additional expense of ordering a white mobo and gpu!

@TheProvokedPrawn 2 ай бұрын

You barely see it when it's installed though

@DisproportionedMalcontent 2 ай бұрын

@@TheProvokedPrawn Hopefully, but you also barely see a dead pixel, though you cant stop looking at it. Youre also not using a white mobo like I am =/ Not a huge deal though, Ill build as planned and go upright or vertical if it bothers me. Thanks again for all your great videos.

@JIZQU 3 ай бұрын

@TheProvokedPrawn what are the options if i want to Put in 140 fans on top side and bottom , plus the single 120 in back , does lian li offer the 140's in 3 packs with the controllers?

@Bacon89 6 ай бұрын

I can't decide between RGB and XL. I will install 120mm because the SL INF 140 are not available. but it would make more sense with the 140mm option on the XL. I think the space for cable management on the XL is very nice. With the RGB I have concerns about the dust because the filter at the bottom doesn't cover the entire area. what do you think?

@TheProvokedPrawn 6 ай бұрын

kzfaq.info/get/bejne/jdJ9qJSD362-ZIk.html

@eseb1ghu3ro 4 ай бұрын

looks like im gonna have to buy this lol

@lxaw9374 3 ай бұрын

did you make a video about how to build in this case in reverse in the end? I'm thinking of buying the case as I have to have my PC to the left of me on my desk, so I'd like to build in this case in reverse.

@TheProvokedPrawn 3 ай бұрын

Not yet

@JT-vw7qv Ай бұрын

Is the top empty pcie slot usable if the graphics card is vertically mounted in the traditional setup?

@MrSamadolfo 2 ай бұрын

😒👍 Lian Li 011 EVO's are one of the few cases on the market that you can flip it upside down so that you can put the case on the left hand side which is why I have it, lian li also now sells reversible blade fans for the three fans that you bolt up to the side of the case theres a few other small outfits making revisersible fans too but this is something that is kind of niche still rite now, EVO's come in black and white, and theres two revisions, you have this newer one where the glass panes have no supporting metal bracket and you have the older version which has a metal frame bracket, this newer one which is all glass please be extra careful because without the frame the glass can shatter much easier and you dont want that, shattered glass makes a huge mess plus the bits can cut ur skin and get embedded in ur skin

@BrandyDerg 6 ай бұрын

would the DeepCool AK620 fit in this Case?

@kemo9507 5 ай бұрын

Hey so is there a difference in size between this case and the original evo? And could you place 3 140mm fans on the back of the case next to the glass or can u only place 2?

@k0ntII 2 ай бұрын

top-bottom-side you can place 3X120mm or 3X140 mm . whatever u want

@christinak7502 2 ай бұрын

I am starting to gather information about making my own build: an AMD Ryzen 9 7900 with an MSI Pro x670-P WiFi and Corsair Vengeance RGB DDR5. I am eventually getting back into WOW, and I am not sure if I want to invest in the higher graphics card now or wait until after I finish my master's degree. Thoughts?

@pooeat3r 4 ай бұрын

do shift psu's fit in this case while keeping the harddrive cage?

@paulhallatt1694 6 ай бұрын

For the reverse build, how did you layout the FANS & AIO, which were intake and exhaust?

@TheProvokedPrawn 6 ай бұрын

Top and side are intake. AIO and rear are exhaust. Not necessarily optimal

@AidenPryde3025 5 ай бұрын

In your opinion would it be possible to put a 420mm AIO in the side mount? The spec sheet said that you can mount three 140mm fans in the side, but that you'll be missing four screw points... two at the bottom and two at the top. I would think a 420mm radiator would fit in the side and be secured with four screws towards the middle of the radiator, but I've not seen anything definitive.

@diana.winter 5 ай бұрын

You won’t be able to fit a 420mm radiator on the side because there won’t be enough room for the ports. Even a 360mm crossflow is unlikely to fit (not enough clearance for the second set of ports) unless it’s mounted on the flat side of the side bracket. That costs an extra 30mm of space inside the case and makes cable routing more difficult unless the fans are mounted on the other side of the bracket. Aesthetically, that probably only works with an upright GPU mount.

@ferdi2457 2 ай бұрын

Would the corsair shift series work well in this case?

@jacktaber8489 4 ай бұрын

So I just built in this case and I really like it, although one thing seems to be missing- is there no static color option for the case lighting? I've been playing around with the RGB buttons on the case for quite some time now and I cannot find a static setting; every setting has the lights moving, or fading in and out. I have a hard time believing there is no static light setting. Can anyone confirm/deny this?

@trick-UK 6 ай бұрын

@TheProvokedPrawn Is it possible when in vertical GPU mode to have 2 PCI Devices connected, I would want my Water Cooled Graphics card at front, and 4 x Nvme PCI card just behind it

@anujgameryt13 6 ай бұрын

which liquid is best in look corsair new i cue link display vs lian li display

@harrisonbanda4921 5 ай бұрын

I really want to see a full on 140mm fan build in this case (mostly cause I am considering it), does it improve the air flow or? Would appreciate if you got back to me on this

@TheProvokedPrawn 5 ай бұрын

from what I understand 140mm fans are mostly superior because they're larger and can move less air while spinning slower. So you can have a quieter building doing so. I've not tested thermal performance of 120 vs 140 in any particular case. Though that would be interesting for sure.

@harrisonbanda4921 5 ай бұрын

@@TheProvokedPrawn Same thing I was thinking, don't see why the airflow wouldn't be better, want to try 3x140 top exhaust, 3x140 bottom intake and the 360 rad on side, hopefully nothing goes south

@ronin1754 3 ай бұрын

Damn,that's a mad case ,maaad,i am beginner pc enthusiast and i would like to use this case to build my self a pc,i have a pc atm but a friend built it for me,all i did was watch and pass the tools xdd But this time i wanna do it my self, i was considering the Corsair 6500d airflow ,until i saw this video,this case is cheaper and has tons of options ,it's insane i have never seen anything like that before.

@TheProvokedPrawn 3 ай бұрын

Here's a build guide if it helps kzfaq.info/get/bejne/gsCqZdiZv6e7qok.html

@ronin1754 3 ай бұрын

@TheProvokedPrawn Thank you sir ! This will definitely help alot ,one thing tho i am using an older motherboard x570 gigabyte aorus elite and has the older front panel connector slots.i might go in a dead with that or not ?

@jordand3294 Ай бұрын

Is that true that the air blow in this PC case you set bottom: Intake, motherboard side( CPU thermal radiator) : Intake too, and only top of this case is exhaust ?

@TheProvokedPrawn Ай бұрын

That can be logical

@xxbarny90xx46 2 ай бұрын

To control the rgb strip through software is it only available on the mb software app or could third party’s connect to it like lian li Lconnect software?

@prophecy8395 29 күн бұрын

u have an answer already? mine changes always back to the default red-blue and i can't controll/find it with any software :/

@SanniVS_ 5 ай бұрын

Can you daisy chain the Sl inf fans with these new TL lcd fans? I want to add one in the rear of my case

@TheProvokedPrawn 5 ай бұрын

@Riggan201 6 ай бұрын

It's an awesome Case, but what i don't get, why they missed dust filters.. the mesh by itself is just not good enough 😢

@duffel87 6 ай бұрын

where does it say that it doesn’t have dust filters ?

@Galaxius1 6 ай бұрын

He just does not say it in the review. On their site they say it is not included. You cannot even buy it. I would not buy it until they produce the filter at least.

@chaophraya8003 6 ай бұрын

Yeah, and the strange thing, is that they have 2 dustfilters on the backside of the new XL case? Should be easy, and not to expencieve to do that for this case too?

@sidesw1pe 4 ай бұрын

Oh ffs are you serious no dust filters wtf 😡

@Henrique-wv9xq 4 ай бұрын

they want to sell it as an addon, lian li najws good products but they're greedy af

@elchancho8432 3 ай бұрын

I’m guessing if you use the vertical mount you don’t need to use the GPU anti sag bracket?

@TheProvokedPrawn 3 ай бұрын

In theory

@georgiodavid 5 ай бұрын

I cant find in Benelux. When is it releasing ?

@KyleH20s 3 ай бұрын

Does the corsair 1200x shift fit in here?

@epicchan9662 6 ай бұрын

how’s the lian li galahad, i heard many ppl have had a lot of issues and problems with it

@TheProvokedPrawn 6 ай бұрын

There have been a few firmware releases which have helped with issues

@thomasmoracki989 3 ай бұрын

Will a 420 AiO fit in reverse mode?

@krystianh4026 5 ай бұрын

Where can I buy vertical fan with display ?

@Jens.M Ай бұрын

I have the O11D Evo XL and bought 2 times the wrong vertical mount. Then finnaly it was the right one and it would have looked so cool but with my 4080 it didn't wanted to work anyways. The GPU was sitting an angle in the power connection and didn't get power to a100%. So sad..... After that I gave up!

@rsmart84 6 ай бұрын

I worry about the glass joint. Still not sure if to get this or just the Evo?

@TheProvokedPrawn 6 ай бұрын

kzfaq.info/get/bejne/jdJ9qJSD362-ZIk.html

@didierdilorenzo3529 3 ай бұрын

friend, a question, Lian Li's controllers did not give you USB disconnection and connection problems with the Connect L3 software. That RGB decoration is beautiful, but I returned the CPU cooler because stable configuration of the system was impossible for me./???????????????????????

@TheProvokedPrawn 3 ай бұрын

Not had problems

@lokeshg7706 Ай бұрын

I am gonna add , 4 , 120mm fans , top n bottom 😸😸

@OMUNDRA699 3 ай бұрын

Compare Lian Li o11 dynamic evo rgb vs NZXt h9 Elite

@Hhh-j8o 4 ай бұрын

Would 3 x 120mm fans on the side intake, 1 x 140mm exhaust on the back, 2 x 140mm intakes on the bittom and a 280mm aio on the top for exhaust work for this? Ive buukt many pcs but its my first time actially doing fans properly and i have no clue 😂

@MisterJimJim 4 ай бұрын

Yes to everything except the 140mm back fan. A 120mm fan will work.

@brrrandamoactivo 6 ай бұрын

17:54 they are 120mm fans right ?

@masterx29_ 4 ай бұрын

can i use TL LCD fans with Lian Li SL INF fans together? like same controller?

@TheProvokedPrawn 4 ай бұрын

Lian Li says you'll need both controllers

@Henrique-wv9xq Ай бұрын

I wish the extended HDD and PSU trays were optional or an extra option that came with the box. I kinda dislike how that looks.

@user-uf5qe1xr7l 4 ай бұрын

can use 140×3 fan top,bottom,side??😢

@ryanchenoweth5673 2 ай бұрын

Which config ran the coolest? 🤔

@shawnwhitter5968 Ай бұрын

Can this fit a 4090 fe?

@user-jg4ip6ss2l 4 ай бұрын

謝謝！

@TheProvokedPrawn 4 ай бұрын

Thanks for the super thanks

@CalyX. 6 ай бұрын

Corsair fans logos are upside down on the side intake.

@TheProvokedPrawn 6 ай бұрын

Well spotted 😄 you win for being the first person. I noticed it but by that time I'd built it multiple times and didn't have time to sort it before editing.

@stelaw6 3 ай бұрын

Could i do 420 push pull up top?

@Kentish9494 6 ай бұрын

I've just done a build in an NZXT H6 Flow using Lian Li AL V2 Fans and although the fans and how they clip together is great, the software is a steaming pile. It kept saying hub wasn't connected when device manager showed it is. They simply don't work and a quick Google seems I'm not the only person suffering from this. Great fans hideous software

@TheProvokedPrawn 6 ай бұрын

Usually a firmware update will fix it kzfaq.info/get/bejne/rtN8fLhllbuzhn0.html

@808Chicken 5 ай бұрын

How’s the temps on the negative pressure?

@TheProvokedPrawn 5 ай бұрын

It has six intake fans and 4 exhaust. It's been good from what I've seen.

@ashleylinette5462 Ай бұрын

Hello, I recently got a very similar pc built with 3 TL LCD fans and 7 TL fans however every now and then the RGB on the fans seems to flicker on and off. Any idea what the cause of this could be?

@TheProvokedPrawn Ай бұрын

Afraid not. Unless there's a loose connection somewhere. Have you checked for firmware updates?

@ashleylinette5462 Ай бұрын

@@TheProvokedPrawn Thanks for the fast reply. I've checked the connections and the firmware all seems to be in order there. I've already had replacements from Lian Li as well but that didn't seem to resolve the issue either. Thanks for the help though!

@TheProvokedPrawn Ай бұрын

@@ashleylinette5462 all the fans flicker? Could it be a power fluctuation? From your power supply or a loose power connection to the wall or internally on the PC maybe

@ashleylinette5462 Ай бұрын

@@TheProvokedPrawn All the TL fans flicker yes, the LCD screens and the fans themselves seem to stay on though. It could be a power issue but all the other components in the computer seem fine. I've tried 2 other wall sockets as well, that didn't help either. A quick browse of the lianli Reddit seems to indicate that multiple people are having this issue. :(

@TheProvokedPrawn Ай бұрын

@@ashleylinette5462 did Lian Li replace your controller? I am uselessly trouble shooting from afar. Sorry

@venomvenom6971 6 ай бұрын

Does this have the inverted build?

@TheProvokedPrawn 6 ай бұрын

Yes, I showed it

@venomvenom6971 6 ай бұрын

I watched it haha appreciate the reply:)

@thun44 5 ай бұрын

Is it correct its 3x fans reverse at the floor and 3x fans reverse on the rear?

@TheProvokedPrawn 5 ай бұрын

Reverse on bottom and side if that's what you mean.

@thun44 5 ай бұрын

@@TheProvokedPrawn yes thats what i ment. Im new to this and learning some good stuff here. Love your vids

@PAIN-ot4cj 6 ай бұрын

This case looks ok but Im sticking with my lian li EVO XL its actually; better in every way.

@TheProvokedPrawn 6 ай бұрын

Yeah I prefer the XL too

@PAIN-ot4cj 6 ай бұрын

you had an awsome 2023 year with your channel. I hope you have another amazing year in 2024 cheers!@@TheProvokedPrawn

@getonmalvl 6 ай бұрын

@@TheProvokedPrawncan you do a video and explain why or do a new comparison video with the rgb included. I’m on the fence now after learning there are no dust filters

@Le10White 6 ай бұрын

Reverse mother board but no reverse flow fans.

@GIJoeMeerkat 2 ай бұрын

Having issues with the side panel popping out, anyone else having this issue?

@dark___matter_ 5 ай бұрын

But no air-cooled config.

@jameslo3925 4 ай бұрын

What cpu cooler is that? not the lian li one. plz

@TheProvokedPrawn 4 ай бұрын

It's the Galahad 2 LCD, why

@jameslo3925 4 ай бұрын

the other one connected to the corsair fans, just thought it looked nice thanks for ur time@@TheProvokedPrawn

@jameslo3925 4 ай бұрын

the one with the jason momoa video on

@TheProvokedPrawn 4 ай бұрын

@@jameslo3925 oh I see, sorry I misunderstood. It's Corsair's iCue Link AIO with LCD upgrade kzfaq.info/get/bejne/qq-ohMeJ19y7iI0.html

@drew_taylor2475 4 ай бұрын

This or the nv5?

@mydogvlad Ай бұрын

This

@nick1ph 6 ай бұрын

can i fit 4090 in this?

@TheProvokedPrawn 6 ай бұрын

Shouldn't be an issue

@Galaxius1 6 ай бұрын

It is a shame you do not mention that there is no dust filter included and you cannot even buy one. 011 evo xl has them. But why you dont mention it

@getonmalvl 6 ай бұрын

Because it’s sponsored by Lian Li?

@TheProvokedPrawn 6 ай бұрын

It was an oversight on my part tbh. I was looking at everything else and didn't notice or think about it.

@TheProvokedPrawn 6 ай бұрын

No, it wasn't sponsored, I'd have to declare that legally and I've never been sponsored by anyone.

@Galaxius1 6 ай бұрын

Thank you for replying. Just does not makes sense to include it in XL and do not make it at all for this case. Especially in RGB you will see more clearly small dust particles

@getonmalvl 6 ай бұрын

They SHOULD sponsor you tbh. Crazy.@@TheProvokedPrawn

@ben_wesker 6 ай бұрын

How to on the front rgb ???

@TheProvokedPrawn 6 ай бұрын

I showed it near the end of the video I believe

@ben_wesker 6 ай бұрын

@@TheProvokedPrawn I believe connected all the cables correctly but in my gigabyte motherboard I couldn’t where to control if you have tips please tell me its gigabyte z790 elite ax motherboard.

@TheProvokedPrawn 6 ай бұрын

@@ben_wesker you need RGB Fusion

@TheProvokedPrawn 6 ай бұрын

@@ben_wesker kzfaq.info/get/bejne/lbJ2o6Rlz7vcj6c.html

@rickss69 3 ай бұрын

Not back connector motherboard capable...no sale.

@sneakatwix 3 ай бұрын

You do know back connection motherboards were really pushed mostly after CES2024 right? And this case came before that. Lian-Li has a case coming out for what you’re looking for.

@MelonThe3rd 4 ай бұрын

0:30 who even asked for this XD

@AlgaeEater09 4 ай бұрын

It's so you can have the computer on the left side of your desk now.. instead of only on the right

@SubBizkit78 Ай бұрын

STOP MAKE YOUR VOICE DARK, START SMOKING IF YOU WANT IT DEEP AND DUSTY. ITS SUCH A FAKE VOICE,

@TheProvokedPrawn Ай бұрын

Not even remotely true

@_4ms 3 ай бұрын

your voice is very noisy 😣😣😣

@OGHawkeye 6 ай бұрын

ouch my eyes!!!! what have you done!? killed the beauty of this case with your component choices. have you lost your mind? edit: ok the new fans are better, but corsair inside this? bruh....cmon...gigabyte and msi?? couldnt have chosen worse unless your going for a version of poorest way to build in a lian li case....

@TheProvokedPrawn 6 ай бұрын

Lol. MSI does solid motherboards and there's nothing wrong with the Gigabyte 4070 Ti. It's a great performer