Lian Li PC-O11 DYNAMIC "GOLDEN DRAGON" TIME LAPSE BUILD
Рет қаралды 2,136,445
5 жыл бұрынHi to all!
Let me introduce you this time the "Golden Dragon".
This build took me approximately 2 months until i eventually completed it. Haven't done any major moddings on the case itself. Just integrate some little changings. Golden Dragon was a long time in project until it came o ut to life. Some very well-known youtubers have been showing up their "non-rgb&golden" builds. I wasn't actually meant to compete with them. But I like the challenges.
Notice: This build is not sponsored by Lian Li:).
Cpu is delided and installed OC-Frame. Cpu on idle @26c (decreased from 30-32c after deliding and OC-Frame), Gpu on idle 24c. Very fresh build. Haven’t overclocked or benchmarked yet.
As always I would appreciate if you give a like and share it. And please don’t forget to subscribe.
COMPONENTS
Processor: Intel i9 9900K (tray). amzn.to/2CiR4zH
Motherboard: Asus PRIME Z390-A amzn.to/2UHOvOI
Graphics card: Nvidia RTX 2080 TI FE
Ram: ADATA XPG DDR4 4X4 (16gb) 3000Mhz amzn.to/2UBB2bc
PSU: Seasonic Snow Silent 750w Platinum (White) amzn.to/2T47jGt
Sleeved PSU Cables: Shakmods Premium sleeved cables.
SSD: Intel 520 series 240+480gb 2,5” ssd’s. Additionally Samsung 950 evo 256gb m.2
Fans: Aigo c5 120mm rgb fans amzn.to/2Fajj5u
Chassis: Lian Li PC-O11 Dynamic (White) amzn.to/2Fb9bcP
WATER COOLING PARTS
Pump: Barrow DDC pump&top, bykski DDC pump cover.
Reservoir/Distro: Barrow LL11 Q-SDB waterway channel
Cpu Block: Bykski LGA 115x cpublock (white).
Gpu Block: Barrow RTX 2080 Ti Gpu block
Rigid fittings: Barrow 10x14mm rigid compression fittings
Hard tubes: Barrow 10x14mm PETG 500mm rigid tubes
Radiators: 2x 240mm x 27,5mm fullcopper radiators
Where to buy water cooling parts?
www.aliexpress.com/store/4312...
BUILDLOG (In Finnish language):)
bbs.io-tech.fi/threads/golden...
Contact:
Facebook: profile.php?...
The music I used in this build:
Nomyn - Lightness
Music from freetouse.com
Track: Ikson - Skyline
Music from freetouse.com
Track: Markvard - Losing My Mind
@AKTechMods 3 жыл бұрын
Check out the new Lian Li 011D XL build in a different color theme and special sponsored project. kzfaq.info/get/bejne/fJqYfNd4ndOqnZs.html
@onivel6628 3 жыл бұрын
How much cost it
@looney2be 3 жыл бұрын
nice build. but i want to know which fan size do you use for that back fan. is it 80mm or 70mm?
@AKTechMods 3 жыл бұрын
@@looney2be Tnanks. I cant beleive i still answer the questions about over one year old build. It's definetely 80mm fans. Try to get the PWM ones, the regular ones with 3 pin are quite loudy.:)
@looney2be 3 жыл бұрын
@@AKTechMods yeah i'm building inside the same case. And wondering if i can fit small fan behind. Do you drill extra hole or just using existing hole? Thanks for responding.
@AKTechMods 3 жыл бұрын
@@looney2be It needs to be definetely drilled new holes. Make sure to measure the holes from inside while the case laying on it's back. Two side adhesive tape would help to hold the fans on its place. Good luck.
@odeydidit9846 5 жыл бұрын
He used pressure gauge, brilliant way to check for leakage,, nice
@Shinochaos 5 жыл бұрын
I was wondering what he was doing. I'm new to building PC's so I've been watching videos and reading comments xD I hope one day I can build a beast like this
@sethabbott8563 4 жыл бұрын
@@Shinochaos same dude
@Slicky_Vic 4 жыл бұрын
Shinochaos it’s not rocket science you just need to know what parts screw into the proper places... honestly just off of this video alone you can probably put 2 and 2 together to figure out how it’s built if you have all the right parts.
@Slicky_Vic 4 жыл бұрын
Shinochaos or find someone that knows what they’re doing and have them help you!
@hustler539 4 жыл бұрын
Anyone know what pressure gauge and pump he used?
@vitor900000 4 жыл бұрын
There are so many famous youtubers that call themselves "Professional" Custom Loop Builders but not a single one of them do the easiest, simplest and safest leak test. Air Pressure 8:49. Thumbs Up man. You are one of the few that actually show how its supposed to be done.
@gamerdweebentertainment1616 3 жыл бұрын
still no idea... so I presume if there were a leak the gauge would return to 0?
@vitor900000 3 жыл бұрын
@@gamerdweebentertainment1616 If there is a big leak yes but if its a small leak it would not go all the way down / would go down very slowly. Any pressure reduction a leak sign .
@kh8655 3 жыл бұрын
true.. all I've ever seen is people throwing loads of shop towels inside, and saying to pay attention to it in case there's a leak -_-
@BeatstormX 3 жыл бұрын
He cant even do proper airflow, not a single intake fan
@andrewbaek6691 3 жыл бұрын
@@BeatstormX ya he is pretty dumb
@Callmecross 4 жыл бұрын
How to call someone poor for 12 mins without saying a word.
@prototype8137 3 жыл бұрын
I mean id rather be poor than stupid for spending this much on looks. As far as performance increaae its minimal at best. Even conventional air cooling is still sufficient enough for any gaming rig.
@ensiel4738 3 жыл бұрын
@@prototype8137 True. I respect the uploader's effort and he obviously has the budget for it but this feels too over the top for me. If I was to watercool I'd probably run the simplest loop possible but yeah performance gains aren't really worth it.
@teensoncreatine1718 3 жыл бұрын
Nah we’re not poor it’s just that he’s rich af
@alext2k3 3 жыл бұрын
@@prototype8137 TRUE
@UpstageBeast 3 жыл бұрын
Nah you should see the Arabian Prince's CSGO inventory- $2+mil spent on a videogame he doesn't even play lmao.
@arts6821 3 жыл бұрын
Im usually not a fan of Gold looking stuff, but this looks quite nice.
@GoldenKID247 5 ай бұрын
Ouch that hurts
@depressedonion5610 5 жыл бұрын
and here I am still trying to figure out how to hide my SATA cables.
@malikplayz8608 4 жыл бұрын
Jacob O'Dell 𝒘𝒉𝒂𝒕 𝒅𝒐 𝐲𝐨𝐮 𝒎𝒆𝒂𝒏 𝒋𝒖𝒔𝒕 *𝐄𝐀𝐓* 𝐭𝐡𝐞𝐦
@studentprawa4804 4 жыл бұрын
he uses m2 disk
@XhizorBE 4 жыл бұрын
sata ? Just use nvme you can connect those drives right to the motherboard. And they are like 4-5 times faster than a sata ssd
@IsaiasVelez 4 жыл бұрын
Dual chamber case allows for some sweet cable management. Also m.2 eliminates cables
@ammarmirza507 4 жыл бұрын
@@XhizorBE also gaddam more expensive
@Lokswar 5 жыл бұрын
This is a masterpiece. Thumb screws on the PSU 10/10.
@demonpride1975 5 жыл бұрын
i was thinking the same thing, i love the thumb screws for everything. even more so for board placement.
@drbmaitra 3 жыл бұрын
One of the finest builds on youtube. You have really spent hours on this project. Waiting to see more creative builds from you. Congratulations!!!
@endrileka8271 4 жыл бұрын
My wallet: Don’t even think about it...
@Gagliano17 3 жыл бұрын
@insaane it's not needed though, i've ran a custom watercooling since 2-3 years now that cost me like 130$ total, looks amazing and works perfectly fine.
@BigChungus-ex2xh 3 жыл бұрын
@@Gagliano17 I think he was talking about all the color coordination with all the parts and the parts themselves.
@BigChungus-ex2xh 3 жыл бұрын
@@Gagliano17 This is like a $1500+
@vius09 5 жыл бұрын
Excellent work man. I knew right off the bat just looking at your fitting assortment... there was insane attention to detail in planning this build. Good work.
@writehse 5 жыл бұрын
I think you meant to upload this to pornhub not KZfaq
@frantisektorac9562 4 жыл бұрын
True
@demon6831 4 жыл бұрын
Why?? I don't understand
@Jeff071 4 жыл бұрын
The fact that you listed the tubing and fittings is a 10/10 for me! Absolutely stunning build!
@MrPugheaven 4 жыл бұрын
Best build I've seen, just superb combo of colours and nicely done... stunning and can't wait for Version 2!
@Laterilus1 5 жыл бұрын
Wow. Amazing work! I came across your channel while researching custom water loops. I've been building PCs for 20 years but never did a custom water loop. Completed my first one 2 months ago and now I'm hooked. Your builds have inspired me to do more. I've already ordered an Antec Torque for my next build and can't wait for all the parts to come in. I've never been one to spend money on the "art" side of computer building and preferred to put all of my funds towards higher end components, but the building part has become almost as much fun as actually using the computer for me. Keep up the great work. I hope to one day get into designing and fabbing my own custom water blocks and distribution reservoirs like you've done.
@MrBry65 5 жыл бұрын
Hands down the most beautiful PC I have ever seen built! Fantastic job!
@TheDanielSpies_Arcades 3 жыл бұрын
Beautiful video, love it 😍. This pc has so much detail in it... don’t forget that filming while building a machine like this, drastically lengthens the time. This makes it even more of an achievement! Thumbs up 👍🏽
@n8likesmath 3 жыл бұрын
I've seen a lot of watercooling builds but something about this one is just so much better than all the builds on youtube. was looking for parts today and saw a cpu block I liked that reminded me of this build. turns out it was the same one. I really want to recreate something like this, it's absolutely stunning. props.
@Th3WarriorGW 5 жыл бұрын
The most beautiful build i have seen so far. Stunning.
@SemperFiNightHawk 5 жыл бұрын
by far one of the cleanest builds ive ever seen, very nice!
@marcotada 4 жыл бұрын
When I saw the title I thought Geil was re-releasing their Golden Dragon memory line, and you were using it. I owned a Golden Dragon pair of memory modules, they were gorgeous almost 20 years ago.
@richardirvine2220 4 жыл бұрын
This is a one of a kind amazing project. I got to show my friends.... just impressive. Pure. Powerful. Beautiful.
@shadowr2d2 5 жыл бұрын
This is an incredible, & fantastic build. Your attention to detail is incredible. With everything matching. From the SSD, M.2, Fan Covers, & The GPU. I have never seen a Gold Dragon Graphics card. You sir have a new subscriber. Dan.. This is a work of art.
@duniek86 5 жыл бұрын
i only dont get it why ppl not using custom power cables for ssds, stock modular wire not look good, ssd needs only 5V + GND so you can do 2 wire cable which will cost about 6-7$ sleeved
@beanboy9029 5 жыл бұрын
@@duniek86 well why bother customize them when they dont show xd
@duniek86 5 жыл бұрын
@@beanboy9029 easeir to manage, also I always trying to do best cable managment even if its not visible
@subodai85 5 жыл бұрын
Except the thumbscrews... that are quite obviously orange.... Not gold
@vivekjindal578 5 жыл бұрын
report this video for containing pornographic content
@Killer-ku8nf 5 жыл бұрын
Vivek Jindal yea.. please. How hasn’t youtube even spotted it...
@keatonreinson7619 5 жыл бұрын
where?
@thepandemics5614 5 жыл бұрын
Yes it seductive.........
@izakyewsang-gonthier4898 5 жыл бұрын
Keaton Reinson Are u dumb
@legendhasit9172 5 жыл бұрын
@@izakyewsang-gonthier4898 fucking joke went over your dumbass head thats for sure oh wait, wosh
@timothyspencer5034 4 жыл бұрын
This has got to be the most beautiful build I have ever seen. I love this build.
@MrHollow 4 жыл бұрын
WOW, i'm impressed beyond words, this looks absolutely amazing. I'm just getting into water cooling (AIOs don't count) and i was also looking into the PC-O11DW and the Distro Plate and i stumbled upon your build and I'm just blown away. Wish i could do something like this with my build. BRAVO!
@maniameer1998 4 жыл бұрын
Saw this video randomly on KZfaq. The pc build is magnificent and the music goes with it is dope. Love your work 😍. Keep it up bro 😍.
@ays4309 5 жыл бұрын
In simple words, this is a true masterpiece👌🏽. Never seen something that’s even close to this pc, you nailed it. Gj👍🏻
@Dragonorder18 4 жыл бұрын
Definitely a pro build. To be able to have things customized to this degree! What a beautiful build I couldn't even dream of making for myself.
@FreeKiLLuminati 4 жыл бұрын
one of the beautiful rigs i ever have seen
@browntrout3994 5 жыл бұрын
OMG You are one of the first I've ever seen use a pressure tester on the lines versus lets.cross fingers and run coolant thru it and hope for the best. Thumbs up just for that one alone
@Janoww 5 жыл бұрын
Can you explain me the reason why he has used a pressur tester and a bicycle pump?
@justmaybe5643 5 жыл бұрын
@@Janoww It's a leak test... By pumping air in and monitoring the pressure, he can be sure there will be no leaks. Better than just throwing in the liquid and hoping for the best.
@239jonfuentes 4 жыл бұрын
I’ve watched so many vids and never seen That before either
@K4R1N3L1M4 4 жыл бұрын
One question: after the test is complete does he take the pressure regulator out or leave it there?
@voxombrae 4 жыл бұрын
@@K4R1N3L1M4 takes it out
@M4S11S 5 жыл бұрын
Absolutely sickening awesome build! Color scheme on point, love gold! Great job!
@xXLtDudeXx 4 жыл бұрын
Wow, 11/10. Excellent build. Just the time and effort getting everything ready had to be monumental. gg m8 👍
@dest1037 4 жыл бұрын
That was a work of art. What I like about the dynamic/dynamic xl case is it let's you express yourself fully by giving you a blank canvas. I had the corsair 680x before but that case is more beautiful from the go but it can't be fitted with a loop like this. The dynamic is more beautiful when you install an awesome loop like this.
@nogocux 5 жыл бұрын
Great colour choice. I love the "nearly" no bending pipe work with the distribution panel. Well done.👍
@andyvanxanburg536 5 жыл бұрын
I'm speechless. 12/10 ! Beautiful - I can't say more.
@iivindictiveii6601 3 жыл бұрын
Anyone else going crazy over the fans being set to exhaust...? ALL OF THEM...
@timmyboy04 3 жыл бұрын
Pure aesthetics and makes zero difference in thermals. Plenty of space for air to enter through holes in the case. Also, looks like the 2 80 mils on the top back might be intake.
@iivindictiveii6601 3 жыл бұрын
@@timmyboy04 That's exactly the problem. It allows dust to come in through unfiltered.
@mohd.sameershaikh9174 3 жыл бұрын
I never thought tech vedio can be this fascinating. Edit and sound was top class. Its better to see this vedio than songs. Thanks for uplaoding this.
@chasrifflord 5 жыл бұрын
I was just about to ask if you entered this in the builds.gg challenge then I scrolled down and saw that you did you definitely have my vote. singularly one of the best looking pc builds I have ever seen built, amazing truly.
@Syirus2020 5 жыл бұрын
iv built many Pc's but this one really takes the cake, very nice build. I SEE YOU OVER THERE!!!
@josecamacho191 4 жыл бұрын
Best build I’ve ever seen! It’s almost majestic
@EXPIredKUSH 2 жыл бұрын
Most amazing build ive ever saw on youtube
@ManTwoHand 5 жыл бұрын
Mad fun to watch, really nice camera quality. Sick build
@loganschineider9702 5 жыл бұрын
OMG *-* this is simply wonderful. Congratulations
@AKTechMods 5 жыл бұрын
Thanks. Appreciated.
@thatgamergirlshon8049 4 жыл бұрын
I just found your channel and I am hooked. This is one of the most amazing and gorgeous rugs I've seen. Love this I definitely had to subscribe!
@suchanjv 4 жыл бұрын
It really ties the room together.
@Theo-jw6hz 4 жыл бұрын
Persian rugs are the best.
@PaulBrassington_flutter_expert 4 жыл бұрын
A thing of beauty, stand up and take a bow Sir
@nonsonobellomaspaccio8079 5 жыл бұрын
And then there is me that I don't even have a computer.. sick build..no words Keep on man,you're growing!:)
@SemperFiNightHawk 5 жыл бұрын
never to late to start, i didnt know shit about PCs 1 year ago, but now i have my own hand built monster and i couldnt be more proud
@unknownsuspect5742 5 жыл бұрын
BakkenDevil same here. Learned through hours of YT and finally built my own pc. theres nothing more satisfying then building your own monster pc.
@pilouface4740 5 жыл бұрын
And there is me who have a gt 635M from a 2011 old laptop and have to argue with my mom to get a new one x)
@SemperFiNightHawk 5 жыл бұрын
Why not just get yourself a new one, unless your hella young and still rely on your parents income?
@pilouface4740 5 жыл бұрын
@@SemperFiNightHawk Because i can't work i'm still too young :/
@weliveforvacations5203 4 жыл бұрын
In the immortal words of Goldmember " I Love Gold!". Amazing build....
@robl5027 3 жыл бұрын
I never like the over-editing in these videos and the music, but a massive thumbs up from me for the build. Amazing!
@mateofajardo8295 3 жыл бұрын
Soo freaking beautiful... kinda Godlike aestethics. Great build!
@jeremytheasian 4 жыл бұрын
I’ve always wanted a PC that shares a name with my favorite takeout place.
@AAvfx 3 жыл бұрын
A golden beast! 🤯
@timestone 3 жыл бұрын
Yes!
@epicwoody2786 4 жыл бұрын
This is an absolutely stunning build but, I couldn't help but notice that every fan was oriented as an exhaust
@anirbanghosh3292 4 жыл бұрын
That pressure gauge idea Loved it I liked it 100 times
@casketgrind 4 жыл бұрын
I need this computer so I can watch Netflix and Facebook
@trisqxo 4 жыл бұрын
if i have this .. I will watch at it only not the screen 😂😂🤣
@aigami93 3 жыл бұрын
i hate u nothing personal
@casketgrind 3 жыл бұрын
@@aigami93 that's good because I realized I can watch Netflix and Facebook on my phone. The only thing I'd need this computer for is to play solitaire
@aigami93 3 жыл бұрын
@@casketgrind yes solatire is the only thing this copmuter can run lol
@casketgrind 3 жыл бұрын
I might customize the wallpaper. Don't wanna over heat all the motherboards
@beepbapboop126 5 жыл бұрын
beautiful build, but font choice is everything which makes that golden dragon text incredibly distracting!
@ScubaSteveOC 5 жыл бұрын
I AGREE... better font choice would have been better overall gorgeous build
@G_F1 5 жыл бұрын
Yeah, that font is pretty ugly... a much more simple, less-stylized font would have been a much better choice in my opinion. But it’s not my computer! It’s his.
@karaokeentertaintment8197 4 жыл бұрын
Put in an art gallery or museum, it deserves to be looked at and admired.
@nickmiller5489 4 жыл бұрын
Thanks for the video. Looks amazing. I'm going to go stare at my computer and cry now.
@siddl-san9550 5 жыл бұрын
Only two words: True Beauty
@gponcho1 5 жыл бұрын
Love the build. Question: Did you paint the fans, fittings and motherboard in gold paint and if so what type of paint did you use
@robusmc1713 4 жыл бұрын
The white and gold looks so good, That's a lot of work. Very Nice
@vincentdoubt 4 жыл бұрын
very proper video , this is the video first time i see very concern about leaking , they do pressure air test before fill in the water . good job.
@gagongflip389 3 жыл бұрын
Legend has it that it can summon Shenron to grant you a wish without the need to collect all the dragon balls.
@rhystictomato5635 5 жыл бұрын
Trident Z Royal for the RAM over the ADATA would have truly been the icing on the cake, but this is otherwise a stunning build!
@AKTechMods 5 жыл бұрын
Already bought it. But, went with adata because of the g.skill's color missmatch.
@Insaiyanrider 4 жыл бұрын
@@AKTechMods what was miscoloreed ? Super interested ?
@AKTechMods 4 жыл бұрын
@@Insaiyanrider G.Skill has a bit lightgold color and adata has a bit darker/chromic gold color. Adata matches perfectly with bykski''s gold colored fittings, pomp-cover and cpublock.
@1tems 4 жыл бұрын
@@AKTechMods Hey rebuild this pc again but this time use the trident z royal gold and the msi godlike
@linksawakening9737 4 жыл бұрын
Have to agree. I dont even eant to criticize this build though. Freaking stunning!!
@user-xs8wu4qo4g 4 жыл бұрын
My pc is crying in shame right now. Amazing build!
@vanoan6277 4 жыл бұрын
It so beautiful, white and yellow => perfect
@AKTechMods 4 жыл бұрын
Hang on there falks. The Golden Dragon V2 is coming up soon. Got meanwhile multiple ongoing project(s) and they are also on hold due to this pandemic disaster. By the way, stay strong and stay at home . Together we'll beat this too.
@jitterz0135 4 жыл бұрын
Hey do you do these on your own free time or are these pc’s built on commission?
@AKTechMods 4 жыл бұрын
@@jitterz0135 Both..
@wintejr 4 жыл бұрын
@@AKTechMods i am looking to do a black/gold build and am wondering if you painted out the ram/post screws? seem to have perfect color match. If so what paint did you use and where can i get those post screws at?
@jackhangsterfer3118 4 жыл бұрын
What thumbscrews did you use for the motherboard and graphics card bay?
@AKTechMods 4 жыл бұрын
@@wintejr i didn't actually paint myself. All the colors are original. I just did cherrypick the colors after a long search. Thumbscrews and fan covers are from aliexpress/Formulamod. The recent build which i am working on it (G-D v2 ) will have custom paints.
@BrendonHo 5 жыл бұрын
is this like the koenigsegg of the pc world? looks amazing
@becometrue6132 5 жыл бұрын
I think it is
@thewu910 5 жыл бұрын
It’s the Pagani of PC builds...
@andriy5184 4 жыл бұрын
Ayyyyyyy
@topnotchzowdey888 4 жыл бұрын
kzfaq.info/get/bejne/sNWEntp3zpfLk5s.html
@gorillaxrich 3 жыл бұрын
Most elaborate build on KZfaq... Bravo...
@SniffMyYogurtCup 3 жыл бұрын
This thing is just So cool Like Idk what else to say It’s just awesome
@joshualund5173 5 жыл бұрын
What did you use to make the fans gold an where did you get it from they look great!!
@AKTechMods 5 жыл бұрын
Many have been asking about the in&out-take fans setup. It's just for the show. Good that so many have been attracted with it;). Now wait for the next build with in&out-take fans. :D
@driverside6331 5 жыл бұрын
Awesome build, looks incredible. My personal opinion the RGB fans detracts from your build maybe full white colour instead of flashing colours.will be voting for this however !!
@AKTechMods 5 жыл бұрын
@@driverside6331Thanks for the add. The build has now zero rgb.
@Falcon5ive 5 жыл бұрын
Awesome build, super clean, very nicely done, voted
@esrtek5754 5 жыл бұрын
Looks great and all...but you got 1 Basic dead wrong AirFlow!! All fans are set up to grab air from center of case and push it out. However you got NO fans pulling air into the case. At least, it sure seems to look that way.
@AKTechMods 5 жыл бұрын
@@esrtek5754 @Eric R It's just for the show. Good that so many have been attracted with it;). Now wait for the next build with in&out-take fans. :D
@yssughjean 4 жыл бұрын
the first time i saw this, its like a Goddess feeling. its a demi god with that color combination. A mythical build.
@edios300 4 жыл бұрын
Omg, what a beautiful pc.. I'd love to be able to build/afford something like this. Great work.. damn
@asai_24 5 жыл бұрын
I really want to know where those gold thumbscrews used on the motherboard came from. Or at least what threading that is so I can try and find something similar. Is it m3? 6/32?
@Iluvtracilynnjewelry 5 жыл бұрын
He said in the first question response that he got them from aliexpress
@asai_24 5 жыл бұрын
@@Iluvtracilynnjewelry Thnks, didn't see it.
@yeisontmedina405 4 жыл бұрын
What are the golden screws u used to put back together
@danadelafuente1844 Жыл бұрын
10/10 would buy it for full price + labor 🔥🔥🔥 Been looking for a gold custom pc now and it seems you customized a lot of the parts
@reviewforthetube6485 4 жыл бұрын
Now this is one sick build and thats meant as a good thing wow just wow
@bantot1296 3 жыл бұрын
I just love watching things that I can't afford
@axe863 2 жыл бұрын
Theres no point to water cooling unless you have a multi-GPU setup.
@alexking7719 5 жыл бұрын
wicked build. But... that front reservoir would drive me nuts. The way the coolant is getting in-between the layers of acrylic where it shouldn't be would drive me nuts. Also the fallout from the opaque fluid is going to build up in there reallllly fast. awesome attention to detail tho. I like the colour matched thumbscrews for mounting the mobo a lot.
@AKTechMods 5 жыл бұрын
Thanks for the nice comment. Appreciated. Imagine that distro as a hourglass which sand is flowing down constantly. Sad that it can't turn upsidedown:D.
@monsta21cb 4 жыл бұрын
That pressure gauge idea is so smart I'm doing that on my next build
@nightmarecoins8265 4 жыл бұрын
Dued this is beautiful I have a Dell computer i5 can't do much but admire what you've done here amazing
@JawZz 5 жыл бұрын
My jaw dropped when I saw this, it hit the video and brought me here
@Lord_RoadRunner 5 жыл бұрын
I was wondering why the hell you put on a bike pump then i realized pretty clever idea This pc looks incredible
@Tiefire2 5 жыл бұрын
Im pretty new to the pc watercooling. Can you tell me why was a good idea that he us the bike pump?
@Vestegneen 5 жыл бұрын
TieFire I’m not sure but I think he’s pumping air inside to make sure the water cooling is not leaking when getting liquid into it. So pumping it up to 0.3 BAR for example and if it stays at the number you have pumped it up to in 10-15 minutes he’s sure the system is not leaking :)
@Lord_RoadRunner 5 жыл бұрын
@@Vestegneen yea that seems about right Dont take my word on it though iv i dont own a desktop let alone custom watercooled :/
@gotmadsk1llz 4 жыл бұрын
Nice Job it looks amazing thanks for sharing that with all of us.
@crazyrican81 4 жыл бұрын
This is a awesome video.... Still how can people dislike this? Great job on putting this together.
@croiserecruit8993 4 жыл бұрын
Man this build is so damn nice I wish I had a job so I can get money to make one of these masterpieces
@giorgioblessedbaby5213 4 жыл бұрын
10+ months later and this is TOP TIER BUILD NO DOUBT. Artist, builder, and brilliant. I'll subscribe and look forward to some testing AFTER drooling overtime build- this would set you OUTSIDE AND ABOVE the illusory idea that after a build there's no testing done- why?; and it's frankly NO REASON ergo "illusory". HATS OFF TO YOU AK. Awesome build !!!
@_ballistic Жыл бұрын
Plenty of travel in tubbing. Done in a very inteliggent way. Amazing build
@KraftyB 3 жыл бұрын
Creative, I don’t think anyone’s ever thought of cooking their pc with milk before, well done
@rexknowsless3187 5 жыл бұрын
0 out of 10 not enough RGB Nah just playing, this is the best build I’ve seen with this case. Props to you! but seriously tho add rgb
@denaibrahem8587 5 жыл бұрын
9:51
@MikeHedges1993 5 жыл бұрын
I sure hope that chip OCs well being with being delidded.
@temptor7585 4 жыл бұрын
Very nice! Truly a work of art.
@martint.5913 2 жыл бұрын
Absolutely Stunning !!!
@kiwiwithakiwi7050 4 жыл бұрын
Bro, this vid is the sexiest pc i've ever seen man! good job! I was wondering how much this set you back? I want to build this but I dont have money for custom cooling and a 2080 TI, are there any other substitutes?
@hiroakin8822 3 жыл бұрын
AMD is always good performance but I’m not exactly sure if it comes with water cooling capability but if it does, I would get a 5700 XT III
@brummiepcgamer568 5 жыл бұрын
thats the best looking pc build i have ever seen on you tube.
@user-iw6gt7lv3j 4 жыл бұрын
Amazing... wonderfull! Thanks You very much for this video from Russia! This is the most beatifull PC i have ever seen!
@cali-cali6700 4 жыл бұрын
You are the only builder I have seen so far using pressure to check for leaks. Everyone else uses paper towels.
@shogunoba8611 4 жыл бұрын
So if you want to give that away I’m your guy! Amazing, and I want it more than anything! Great build!
@DavidRodriguez-eh8yd 5 жыл бұрын
Sick build looks great.. but sad you guys didn’t show the taking apart the cpu, graphics card, or how you connected the hoses for water cooling
@ScubaSteveOC 5 жыл бұрын
agreed
@AKTechMods 5 жыл бұрын
Promise to do it next time. Thanks for the feedback anyways.
@DavidRodriguez-eh8yd 5 жыл бұрын
Ty for the reply you guys rock@@AKTechMods
@giorgioblessedbaby5213 4 жыл бұрын
@@AKTechMods I saw and clicked- GLAD I DID! This INHERENTLY shows you are both an incredible builder AND an artist. I'll subscribe after this 1 vid. Better in my opinion as ALL WONDER- a few tests after the satisfying minutes looking at angles of the completed build. Pressure gauge = contender HA! Hats off AK.
@CoreChemiix 4 жыл бұрын
That is one mean machine!. Nice work, Its a piece of art...
bit-tech
Рет қаралды 2,2 МЛН
Go Gizmo!
Рет қаралды 25 МЛН
BRO COOLING
Рет қаралды 10 МЛН
Builder PC
Рет қаралды 11 М.
der8auer EN
Рет қаралды 1,4 МЛН
Cord & Wire
Рет қаралды 4 МЛН