We venture into Lidl on a mission to upgrade our bathroom's throne. Watch as we struggle and triumph through the installation process, turning our old, worn-out toilet seat into a new, shiny and convenient one!
How to install a Duroplast toilet seat?
You'll Need:
New toilet seat
Bolts provided with the seat
Screwdriver
Installation Steps:
1. Take off the Old Seat: If you're replacing an old seat, unscrew it from the toilet bowl and take it off.
2. Get the New Seat Ready: Take the new seat out of its packaging and make sure everything is there.
3. Put the Seat in Place: Set the new seat onto the bowl, lining up the holes in the seat with the holes in the bowl.
4. Insert the Bolts: Slide the bolts through the holes in the bowl and the seat.
5. Secure the Seat: Use a wrench or screwdriver to tighten the bolts. Make sure the seat is snug but not too tight.
6. Check Position: Make sure the seat looks straight and even.
7. Tighten the Bolts: Once everything looks good, tighten the bolts a bit more to make sure the seat stays put.
8. Test It Out: Sit on it to see if it feels secure :)