Lift and Store Your Hard Top Without a Hoist

Рет қаралды 74,615

Күн бұрын

⬇️MAIN TOPIC:
This video demonstrates how to build a DIY Jeep Wrangler Hard Top Storage Shelf. The materials required are discussed, the build process is shown, as well as some innovative design elements that allow anyone to raise the top onto the shelf themselves if needed.
Cam Straps: amzn.to/2BSoSqF
Commercial Hoist System:
amzn.to/2ZYtzHo
amzn.to/3N3Gq28
Subscriber Hoist Suggestion: amzn.to/37NWLp2
Forum Suggestions: www.jlwranglerforums.com/foru...
⬇️TIP:
This segment discusses how there are guide pins in the hard top and freedom panels to help mount the top on correctly.
⬇️ Make¢ents
This segment of the video shares a subscriber's tip on using peanut butter to detail black plastics on a vehicle.
* Where possible, Affiliate links are used for products featured in the videos. This means that should you decide to make a purchase through the provided links, CheaperJeeperTV will earn a small commission that will go towards supporting the channel. Thank you. *
(DISCLAIMER: Any and all content provided on the website and KZfaq channel is Cheaper JeeperTV’s opinion and for educational and discussion purposes only. Seek a professional’s advice where appropriate for your vehicle.)
www.CheaperJeeperTV.com
CheaperJeeperTV CheaperJeeperTV
⬇️ Things used in the making of this video:
1. Canon M50 4K Camera: amzn.to/2ZXPFZZ
2. Sennheiser MKE4 400 Microphone: amzn.to/2QRJGBZ
3. Camera Tripod: amzn.to/2ZRjfjM
4. My MacBook Pro for editing/uploading: amzn.to/2ZTb6eC
⬇️ Items Featured In This Video: www.CheaperJeeperTV.com/featured-products
⬇️Music:
Arkansas Traveler - Nat Keefe & Hot Buttered Rum-KZfaq Audio Library
Communicator - Reed Mathis - KZfaq Audio Library
Dulcinea - Steve Adams - KZfaq Audio Library
Finland - KZfaq Audio Library
If I Had A Chicken - KZfaq Audio Library
Sunny - Bensound Royalty Free Music - KZfaq Audio Library
Welcome to the Show - Kevin MacLeod (incompetech.com) Licensed under CreativeCommons: By Attribution 3.0 License CreativeCommons.org/licenses/b...

Пікірлер: 250

@DelanoJ 2 жыл бұрын

Very cool. Bungee cords was genius

@CheaperJeeperTV 2 жыл бұрын

Hey DJ, Thanks for the feedback. I'm glad you liked the video. Cheers.

@gsdls 2 жыл бұрын

As soon as the pegs went under the top I slammed the like button. Thank you for the video.

@CheaperJeeperTV 2 жыл бұрын

Hey Spiderflesh, Thank you very much for the like!!! I’m glad you enjoyed the video. Cheers

@GiveThx4Him Күн бұрын

AMAZING! 🎉 You need to patent this before someone steals your idea. Great video as usual.😊

@CheaperJeeperTV Күн бұрын

Thank you for the feedback. I’m glad you found it helpful. Cheers.

@user-lq7cl4zh6n Жыл бұрын

July 2023 I saw this video and watched it about 5 times to make sure my questions were answered. They were! Lumber is EXPENSIVE @$150.00 TOTAL coast on supplies, but well worth the fact it works just as in the video and I can lift and load my hardtop myself. One MOD I did was to add caster wheels to the sides - perfect MOD for the one person jeeper and a HOA. I just roll it into the garage. Thanks CheaperJeeprTV

@CheaperJeeperTV Жыл бұрын

Awesome!! I’m glad you found the video helpful! Happy trails.

@agrispilegis4806 2 ай бұрын

Looks nice but at 150 for wood my hoist was cheaper,plus I can use it to move heavy stuff into the attic

@CheaperJeeperTV 2 ай бұрын

As explained in the video, this was a solution for those who wished to remove the top, but do not have a garage. 🤷🏻‍♂️

@tpeel6309 2 жыл бұрын

Just finished building this! I'm a mechanic (large air compressors) but I'm not a carpenter. This was a pretty easy build. I had to adjust a few measurements due to larger tires and a lift, but it works great! I'm thinking about casters though because my tires are still rubbing when I back up (I said I'm not a carpenter) and I don't want to have to replace a good hard top! Thanks for this video! I'm going to try to tackle the sleeping platform next. I love your videos! Thanks from Myrtle Beach, SC!

@CheaperJeeperTV 2 жыл бұрын

Hey T Peel, Thanks for the feedback on the videos. I'm glad you found some helpful. I'd recommend the kitchen chuk box for a future project. It keeps the kitchen gear organized and optimizes the use of space. kzfaq.info/get/bejne/qt-llJqAu924iqs.html Cheers.

@rhondanelson3780 Жыл бұрын

This is exactly what I needed! I don't change my hard top often because I have a soft top too, but I like it for long trips because it's quieter. I needed a place to store the hard top and a way to get it off by myself. This is perfect! Thank you so much!!

@CheaperJeeperTV Жыл бұрын

Hey Rhonda, Awesome! I’m glad you found the video helpful. Feel free to share. Cheers.

@catfishmudflap 11 ай бұрын

What an excellent video and ingenious contraption. I don't have a hard top, but I really would like to see more Jeeps enjoy the feeling of having no roof over your head. This is the way.

@CheaperJeeperTV 11 ай бұрын

Thank you very much for the feedback. Cheers

@orlandoespinosa2656 Ай бұрын

Great video! I’ve searching for a DIY hard top removal system.

@CheaperJeeperTV Ай бұрын

Thank you for the feedback on the video. This device works extremely well. Cheers.

@GoldenK9Campers 4 ай бұрын

Bungee cord innovation was brilliant.

@CheaperJeeperTV 4 ай бұрын

Thanks for the feedback. That was a fun project and it worked really well. Cheers

@randylowden1902 2 жыл бұрын

You are so resourceful! I think that's a great solution for those who can't hang the roof from the garage. Impressive!

@CheaperJeeperTV 2 жыл бұрын

Hey Randy, Thank you for the feedback on the video. I was shooting for the simplest, least expensive way to do it on your own. I was happy that the plan actually worked out fine. Cheers.

@danielabdallah2119 Ай бұрын

Excellent, thank you!

@CheaperJeeperTV Ай бұрын

You are welcome. Cheers.

@kapmangaming 2 жыл бұрын

Fantastic build! Even for someone where storage isn’t an issue, great system to removing the hardtop with just one person !

@CheaperJeeperTV 2 жыл бұрын

Hey Kapman, I'm glad you found the video helpful. Cheers.

@jakejake7162 2 жыл бұрын

Was holding my breath when you pulled forward for the first time. The little bit of wiggle made my mind immediately think you forgot to disconnect the wires/fluid tubes for a second😁 always such a creative channel, thanks for sharing!

@CheaperJeeperTV 2 жыл бұрын

Hey Jake, Can you imagine?! I'm not sure what nudged. I'll keep a close look on it when I use it again. Thank you for the feedback on the channel. Cheers

@tmanguyen2758 Жыл бұрын

So glad to state that our Canadians are so talented and intelligent. Let's hope Jeep will watch your invention which they can go back to the drawing board to engineer something practical for the wrangler owners.

@CheaperJeeperTV Жыл бұрын

Here is to hoping! I’m glad you enjoyed the video. It was fun to make this one. Cheers

@alopandur 2 жыл бұрын

Another outstanding idea, realization with full explanation and good video... Thanks Dino ! Cheers, Nash

@CheaperJeeperTV 2 жыл бұрын

Hey Nash, Thank you for the feedback. Always appreciated. Cheers.

@TrailWalkerCB 2 жыл бұрын

Very creative idea, I am super impressed. If I ever go back to a hard top, I will need to create one of these! Great job Dino

@CheaperJeeperTV 2 жыл бұрын

Hey TrailWalker, Thank you for the feedback. Cheers.

@canuckchuck7088 2 жыл бұрын

Love the Lift and Store Solo Edition! Thank you very much!

@CheaperJeeperTV 2 жыл бұрын

Hey Canuck Chuck, I'm glad you enjoyed the video. Cheers.

@scottross5977 2 жыл бұрын

Very helpful and inspiring, Dino. Thanks a bunch!

@CheaperJeeperTV 2 жыл бұрын

Hey Scott, i’m glad you found the video helpful. Cheers

@LuisPerez-13 2 жыл бұрын

I have a hoist for my jeep in the garage, but I love this idea. Thanks for sharing this...

@CheaperJeeperTV 2 жыл бұрын

Hey Luis, You are welcome. I’m glad you found it interesting. Cheers.

@thriveshipcoaching 2 жыл бұрын

You sir, are a brilliant man for ALL your ideas!! Thank you thank you thank you

@CheaperJeeperTV 2 жыл бұрын

Hey Thriveship, Thank you very much for the feedback. It’s very appreciated. Cheers

@JendellOverland 2 жыл бұрын

This will be very useful to many many Jeepers.

@CheaperJeeperTV 2 жыл бұрын

Hey Jendell Overland, Thanks for the feedback. I was going for simple and inexpensive, but the cost of wood these days is surprising!! lol. If you put a big lift on your Jeep, you may need to adjust the height measure of the legs. Cheers.

@JendellOverland 2 жыл бұрын

One thing I might add to this is lockable wheels under this set up, this way you do not need to back into the lift, but just park your Jeep and roll the top into place. This may be easier for those not good at backing up.

@CheaperJeeperTV 2 жыл бұрын

@@JendellOverland Hey Jendell Overland, Absolutely! That would be very helpful. I was trying to keep costs down, and also plan to use it up at the cottage where I don't have any paved areas. Thanks for the feedback. Cheers.

@lbpinnwa Жыл бұрын

Thank you for your build inspiration! I have an open carport, so I will add the casters, as others have mentioned, roll it back, and tarp it when removed. Another addition will be some sort of felting or thin carpeting to the bungee corded stakes to prevent scratching on the side of the hard top as it slides down/up into place. Thank you again!

@CheaperJeeperTV Жыл бұрын

Brilliant suggested additions to the design. Have fun. Cheers

@moriahtoal297 10 ай бұрын

Purchasing the lumber for this right now, can’t wait to build this!

@CheaperJeeperTV 10 ай бұрын

Awesome!!! Better late in the season that never!! I’m really happy with how well it works too. Have fun. Cheers

@veesoho93 Жыл бұрын

Man you got me the moment you said cheaper jeeper ! AND SOOOLD i subscribed right there !

@CheaperJeeperTV Жыл бұрын

Hey Right on!!! Thank you. Feel free to share. Cheers.

@bradha562 2 жыл бұрын

Nicely done! Thank you for sharing!

@CheaperJeeperTV 2 жыл бұрын

Hey bradha562, You are welcome. Cheers.

@jefftenhave8038 2 жыл бұрын

Great idea Dino. Ingenious, Thank you.

@CheaperJeeperTV 2 жыл бұрын

Hey Jeff, Thanks! I’m glad you found it interesting. Cheers.

@robertfisher6256 2 ай бұрын

What a great video. Thank you so much for an awesome idea. I am going to my local lumberyard tomorrow and picking up what I need to build my own. Keep up the great work.

@CheaperJeeperTV 2 ай бұрын

Awesome. I’m glad you found the video helpful. The hoist works very well. Enjoy. Cheers

@GypsyRanger Жыл бұрын

Outstanding video and I will be building myself one of these for my Jeep’s HT!

@CheaperJeeperTV Жыл бұрын

Hey Paul, I appreciate the feedback on the video. The devise works surprisingly well, and it's such a simple design. I planned for it to be used on grass up north, but if you plan to use it on your driveway, you can add castors and just wheel it into place. Have fun. Cheers.

@user-nt6vh9lr4s Жыл бұрын

Amazing! Built it last night! easy, simple, affordable and it works! Great job with the design and walk through. -Side note this design is easy to modify for locking casters

@CheaperJeeperTV Жыл бұрын

Awesome! I’m glad you found the video helpful. Cheers

@jamiecraswell9368 4 ай бұрын

Great video I just bought my first jeep a 2024 jeep Willy’s so I have a lot of learning to do ! Thanks for your help !

@CheaperJeeperTV 4 ай бұрын

Awesome. I’m glad you found video helpful. Cheers.

@BluePhotoMedia Жыл бұрын

That's awesome, the pegs with the bungees. Very clever!

@CheaperJeeperTV Жыл бұрын

Hey Blue Photo Media, Thanks. I was very please at how well it worked out. Thanks for watching. Cheers

@sergebourbon829 Жыл бұрын

Hi, very clever your system...and so cheap and easy to build... thanks 👍 greatings from France😉

@CheaperJeeperTV Жыл бұрын

Bonjour, Merci mon ami! Santé!

@Riegs36 2 жыл бұрын

Really awesome stuff! I am going to build this asap. The bungee cords I will put screws on the side where the hooks are just to hold them better in case of slips. I am going to add wheels to add wheels to the assembly to move the top into a better place. What a great idea and very simple to build. Will subscribe to this channel

@CheaperJeeperTV 2 жыл бұрын

Hey Jim, Thanks. Welcome aboard! Cheers

@BrownSkinFriend Жыл бұрын

Love it! I will build mine soon!

@CheaperJeeperTV Жыл бұрын

Hey ak47ok47, It turned out working surprisingly well. I didn't add wheels, as I will be using it in the yard next to the shed. If I was to use it in the driveway, wheels would make rolling the frame up to the Jeep a lot easier. Have fun. Cheers.

@kimgreer8297 Жыл бұрын

Dang!!! You did it!! Love Love Love this idea!!

@CheaperJeeperTV Жыл бұрын

Awesome. I’m glad you found it helpful. Cheers

@veesoho93 Жыл бұрын

Amazing video ! I love it !

@CheaperJeeperTV Жыл бұрын

Thanks for the feedback. Cheers.

@Wes66-143LakePowellProductions Жыл бұрын

If you add locking wheels (like dolly wheels) to the 4 legs, you can easily roll it back into your garage. I like your idea! Much more secure than those garage ceiling hoist systems.

@CheaperJeeperTV Жыл бұрын

Awesome idea. Thanks for sharing. Cheers

@marcin4497 2 жыл бұрын

Thank you for this video, this a great idea. Definitely, I will attempt to build this with wheels and maybe some other modifications that will come up. Cheers !!!!

@CheaperJeeperTV 2 жыл бұрын

Hey Marcin, That’s awesome! Cheers

@regularguyfixes3142 2 жыл бұрын

Exactly what I was thinking. Some solid rubber 8" tires and can role this thing out of the way in the yard. I have a old load hog as well can fix it so i can pull it like a trailer behind my building out of the way.

@CheaperJeeperTV 2 жыл бұрын

@@regularguyfixes3142 It would be great to do an episode of mods to this design that subscribers have come up with. Good luck with your fix. Cheers.

@Marine-iu3ev 3 ай бұрын

Impressive!

@CheaperJeeperTV 3 ай бұрын

Thanks. I’m really really happy with how well it works. I hope you found it helpful. Cheers.

@warmeds2009 2 жыл бұрын

Damn...I am impressed. Thanks for the video!

@CheaperJeeperTV 2 жыл бұрын

Hey Warmeds, I’m glad you like the video. The DIY lift works out quite well. Cheers

@reggiepoirier9209 2 жыл бұрын

Fantastic!! Thank you so much.

@CheaperJeeperTV 2 жыл бұрын

Hey Reggie, You are welcome. Cheers.

@E3cubed 2 жыл бұрын

This is perfect. Thanks!!

@CheaperJeeperTV 2 жыл бұрын

Hey Edward, You are very welcome. I'm glad the video was helpful. Cheers.

@FredNStillman 2 жыл бұрын

Superb video man

@CheaperJeeperTV 2 жыл бұрын

Hey Fred, Right on! Feel free to share it with others you feel would enjoy it. Cheers

@r.whidden 9 ай бұрын

Wow thanks so much. I don't have a garage and will definitely make this

@CheaperJeeperTV 9 ай бұрын

You are very welcome. I’m pretty happy with how well it works. It was fun to put together and disassembles when you don’t need it. Feel free to share. Cheers

@torontoraptors2107 2 жыл бұрын

Yes sir! Super liked right away! Let me continue watching. 😆✌️

@torontoraptors2107 2 жыл бұрын

10:14 now how to press another like? Im sure it will unlike if i press another like right? Very nice my brother!

@CheaperJeeperTV 2 жыл бұрын

Hey Tor, Thank you so much. Feel free to check out some of the other videos. Cheers

@rollaboutranch4461 2 жыл бұрын

Thank you so much this is a great idea

@CheaperJeeperTV 2 жыл бұрын

Hey Rollabout Ranch, I'm glad you found the information in the video helpful. Cheers.

@zmperry1 Жыл бұрын

This is great! I'm going to try this. But maybe with some locking wheels at the bottom. That way I can move stand to the Jeep. And easily move into storage when not needed. Thanks for this!!!!

@CheaperJeeperTV Жыл бұрын

Awesome. I’m sure it’ll work out and you’ll enjoy having it. Cheers.

@JusSleepTV Жыл бұрын

This is great. Good video

@CheaperJeeperTV Жыл бұрын

Hey Chris, I’m glad you liked the video. Feel free to share!😆 Cheers

@bustertn2014 Жыл бұрын

I have made a few changes to your design. It was actually similar to one I was working already. I turned the 2x4's to their flat sides and placed lockable rollers on the bottom. I used 1x4's for my slides, and I built a similar back brace but where you used 2x4's secondary braces, I did the same but since my frame is set flat, I built close to yours and covered in 3/4 plywood and extened the edge 3.5 inches to reach the outside of the 2x4. I then used 4 carriage bolts and butterfly nuts to go through the plywood to lock it together on each end, but also able to break it down and store it easier. The casters were cheap at capable of 130lb's per caster and have locks. I did a 2 other braces the same way as my first, a second one for the rear and a single to sit center of the front .I can now roll the lid where every I need it. After putting the cab on the 2x4 cross braces, I did the same carriage bolt trick to lock them in place, plus giving the system a bit more stability since they are bolted down through the supporting 2x4 and the 2x4 and 2x8 top plates.

@CheaperJeeperTV Жыл бұрын

Hey Buster, I’d be happy to look at any images or video you’d like to share. You can reach me at CheaperJeeperTV @gmail.com Sounds great though!!

@jwat2396 2 жыл бұрын

Very cool. I think I'd like to make it more permanent by using metal. It'll be more work and some changes made to keep things from scratching the jeep and top but there's always materials to cushion the contact points. Really nice idea you had.

@CheaperJeeperTV 2 жыл бұрын

Hey J Wat, Thank you. If you go through the trouble, you can also use caster wheels to put it to the Jeep. It’ll be easier than backing it up to the stand.

@srcastic8764 8 ай бұрын

I would attach a 2x4 piece on each side of the 2x4 brace you insert last where I put a spinning piece so I could secure the top without having to screw a “lock” on every time. That way I put the 2x4 brace across and just spin the lock down in place. I’d also put some large caster wheels on the bottom so I could roll it wherever I want, make them large so I could roll them on grass.

@CheaperJeeperTV 8 ай бұрын

Great suggestions!! Thank you. Cheers.

@raymondherrera3324 Жыл бұрын

Awesome idea, my next diy project

@CheaperJeeperTV Жыл бұрын

Fantastic. I’m glad you found the video helpful. Let me know how yours turns out. Cheers.

@wulfclaw4921 Жыл бұрын

Brilliant system

@CheaperJeeperTV Жыл бұрын

Thanks. It works really well.

@edmorris5007 2 жыл бұрын

An absolutely brilliant solution! Just what I am looking for…a Solo lifting/temporary Storage Solution for my Hardtop…

@CheaperJeeperTV 2 жыл бұрын

Hey Ed, I'm glad you found the video helpful. I found that it works very well. Cheers.

@stephenkellervideos 2 жыл бұрын

This is brilliant!

@CheaperJeeperTV 2 жыл бұрын

Hey Stephen, Thank you. I'm glad you found the video helpful. Cheers

@nedinsonmejia1811 Жыл бұрын

Save this man at all cost 🎉

@CheaperJeeperTV Жыл бұрын

🤷🏻‍♂️?

@donaldchoi3912 2 жыл бұрын

Thanks to this you gave me a better structure. You can use unistruts and use nuts and bolts then wood for parts not to damage rear hardtop. With wheels you can make it more mobile. But my problem is putting roof top tent by myself. Now here is my new idea. Manual hoist in garage to hold roof tent. Build a similar rack with unistruts. When outside installing I can slowly raise tent by using a way for unistruts to slide up 2 feet with gas struts to help lift it above the Jeep roof rack. I should be able to assemble and disassemble the platform mostly with nuts and bolts. Tent weighs 160lbs so it should be strong enough.

@CheaperJeeperTV 2 жыл бұрын

Hey Donald, I'm glad the video gave you some ideas. Thanks for sharing. Cheers.

@BunnyTJ 2 жыл бұрын

Looks like an awesome idea. I would add some wheels on it as well to be able to move it and put it in the garage after taking it off.

@CheaperJeeperTV 2 жыл бұрын

Hey Thomas, Thanks. Great idea. I was trying to keep the cost down, and my intention is to use this on grass next to the shed at the cottage. Cheers.

@JeepJL 2 жыл бұрын

Well done.

@CheaperJeeperTV 2 жыл бұрын

Hey David, Thanks! I was pleased at how well it ended up working out. Cheers.

@hittite7 3 ай бұрын

I met a genius today… thank you.

@CheaperJeeperTV 3 ай бұрын

I’m glad you found the video helpful! Feel free to share with others.😉

@frankremson7435 2 жыл бұрын

Hey, Thank you so much for this video. My Son and I made this with some slight modifications. We cut the bottom seven inches off added wheels so we could move it. That way I wont have to back into it. I can just roll it in place.

@CheaperJeeperTV 2 жыл бұрын

Hey Frank, Awesome! Now you and your son can get out there in the nice weather with your Jeep. Have fun! Thanks for sharing. Cheers.

@frankremson7435 2 жыл бұрын

@@CheaperJeeperTV Yes indeed - Owe it all to you :) Thanks for the inspiration and amazing design.

@preparetolive7823 Жыл бұрын

Awesome. Super simple, easy to use. Love it. What about putting it on locking casters, then you just position it rather than babking the jeep up.

@CheaperJeeperTV Жыл бұрын

My plan was to use this at the cottage on the grass, by the shed. Your idea would certainly be a great way to line up the Jeep with the rack if doing it on the driveway, for sure. Thanks for sharing. Cheers

@adrian311torreliza6 Жыл бұрын

Now i understand what IQ means thank you man!!!

@CheaperJeeperTV Жыл бұрын

Hey Adrian, Thanks. I'm glad you found the video helpful. Cheers.

@rayray5396 Жыл бұрын

Wow Brilliant! Time to go to hardware store

@CheaperJeeperTV Жыл бұрын

Hey Ray, Fantastic. I’m glad you found the video helpful. Let me know how yours turns out. Cheers.

@rayray5396 Жыл бұрын

Well I built one with wheels and 4x4s for corner posts. I don't have concrete so mine had to roll on grass. Also had to adjust measurements for the Teraflex roof rack bolts to clear the roll bar. Works better than expected! All during the build i wasn't sure it would turn out, but it did. It is a lift and cradle all in one!

@CheaperJeeperTV Жыл бұрын

Thank you for sharing. Cheers.

@PedalsNPetals Жыл бұрын

This is crazy 🤣. I'm hoping my setup will be much easier and safe

@CheaperJeeperTV Жыл бұрын

Cool. Cheers.

@rockstar69ster Жыл бұрын

I think I'm going to try to modify this for my Gladiator!

@CheaperJeeperTV Жыл бұрын

Awesome! I’m sure you’ll be able to do it. Have fun.

@fishinncrapoutdoors4651 Жыл бұрын

I will be making this but will be using treated lumber so it can just stay together outside out of the way as I live in the country and have plenty of room for it 👍👊

@CheaperJeeperTV Жыл бұрын

Brilliant! Cheers

@toomanyprojectstx Жыл бұрын

Brilliance…

@CheaperJeeperTV Жыл бұрын

I’m glad you found the video helpful. Cheers

@ajithchandranr7625 2 жыл бұрын

Fantastic idea and I did build it for my Jeep. I made it a couple of inches taller and wider so that I can drive my jeep Rubi into it while keeping the whole set up inside the garage. Its holding up pretty well. Thank you!

@CheaperJeeperTV 2 жыл бұрын

Hey Ajith, That’s awesome! I’m glad you found the video helpful. Feel free to share. Cheers.

@PedalsNPetals Жыл бұрын

I'm thinking about this too

@contemporaryprimitiveman3469 Жыл бұрын

I came here looking for ideas. I'm hoping to build a frame on wheels for safely storing top and doors when not on the vehicle.

@CheaperJeeperTV Жыл бұрын

I hope the video helped. Cheers.

@craiginker6732 2 жыл бұрын

Love this. Well done. As a suggestion or help, what if I were to include a roller system between the top of the gantry and the cross beams, do you think if this would work? Plus, not sure where I could resource a roller system? Thanks again, great idea.

@CheaperJeeperTV 2 жыл бұрын

Hey Craig, Thanks for the feedback on the video. I’m not clear about your roller system idea unfortunately. Have fun. Cheers.

@johndoe007inDC 2 жыл бұрын

Dude. This is genius. You could even put mounts on the sides for door removal.

@CheaperJeeperTV 2 жыл бұрын

Hey Nordekai, Thanks for the feedback. I'm glad you liked the video. Yeah, I wish I'd mentioned in the video about the option of mounting the doors onto the side of the hard top storage shelf. Cheers.

@pepreo1546 2 жыл бұрын

Great idea, thanks for it 🙂 How about putting some wheels with brakes underneath so you can store the top inside the garage 🤔 Would easier to put the top back on too 🙂 Jeep wave from Luxembourg 👋

@CheaperJeeperTV 2 жыл бұрын

Hello Pep, So nice to hear from Luxembourg, Thank you for sharing your tip in connecting wheels on the legs of the hard top shelf. It would only be a few more dollars but would definitely help. Thanks to you in Luxembourg!!! Cheers

@TwoFeatherChannel 2 жыл бұрын

great idea video got removed but now it's back

@CheaperJeeperTV 2 жыл бұрын

Hey TwoFeatherChannel, Thanks for the feedback on the video. I added an extra tip to the video and switched the original one out. Good eye!. Cheers.

@grizzbuck 2 жыл бұрын

@@CheaperJeeperTV That explains why I didn't see the comment I'd made on the first one you removed. Thought you didn't like my suggestion and eliminated my comment. LOL

@CheaperJeeperTV 2 жыл бұрын

Yeah. I messaged back on what I was going to do on your original post, but I guess if I delete it afterwards, then you don't see my reply. I have lost a few views, thumbs ups and comments, but I thought it would be better to include the extra tip. Thanks for commenting though. Cheers.

@TwoFeatherChannel 2 жыл бұрын

@@CheaperJeeperTV After watching the original video, it wouldn't let me comment that's how I knew the video has been replaced

@craigarsenault6169 2 жыл бұрын

This is a great idea. Just a thought to save a few dollars on lumber, why not use a few wooden pallets as the frame pieces. Yes it would make things heavier but might be a good substitute.

@CheaperJeeperTV 2 жыл бұрын

Craig, That is brilliant. It would make a great video. For now, it’s a great subscriber tip. Thank you! Cheers.

@craigarsenault6169 2 жыл бұрын

@@CheaperJeeperTV If I get one set up, I’ll shoot ya some pics. Cheers.

@CheaperJeeperTV 2 жыл бұрын

@@craigarsenault6169 Hey Craig, That would be awesome!!!! Thank you! I'll maybe ask others to share theirs and make a future video on Subscribers' Hard Top Storage Shelves. Cheers.

@jessegland3000 Жыл бұрын

What about adding heavy duty coaster wheels to be able to move the stand around for easier storage?

@CheaperJeeperTV Жыл бұрын

Yes that would work well.

@PedalsNPetals Жыл бұрын

I want this in my garage and just back into it..I have a 2 door

@CheaperJeeperTV Жыл бұрын

Good plan! It works amazingly well.

@ArthurRoy Жыл бұрын

Thanks, I am glad I dont have to burn what few brain cells I have left to figure this one out.

@CheaperJeeperTV Жыл бұрын

LOL...I hear 'ya! I'm glad you found the video helpful. The hoist works very well. Cheers

@BlackJeepConvertible 2 жыл бұрын

Would you consider a soft top that’s warmer & quieter than your hardtop and can also go top down in seconds?

@CheaperJeeperTV 2 жыл бұрын

Hey Black Jeep Convertible, That sounds pretty good!! What top is that? Cheers

@nancyhernandez6477 2 жыл бұрын

My Jeep has a 2in lift and if I wanted to add 2in wheels on the bottom of this, would that even itself out and work? Or would I have to make adjustments to the height of the table

@CheaperJeeperTV 2 жыл бұрын

Hey Nancy, That sounds about right. If you build it in the same order I did, you can just measure at that time of the cutting and assembly to make sure. Have fun! Cheers.

@mikeshaver7821 Жыл бұрын

I would add locking casters to move the unit around the jeep instead of trying to center the jeep under it. Also, maybe a instead of screwing the boards to secure the top, use a spring type clamp that could be installed and removed in just a couple seconds without requiring any tools.

@CheaperJeeperTV Жыл бұрын

Great tips!!! Thanks! Cheers.

@spritemanplus4700 3 ай бұрын

You could probably get some carpet samples and put em at the end of those stake posts so they don’t scratch your top 🤷‍♂️

@CheaperJeeperTV 3 ай бұрын

Absolutely. Great idea. Thanks. Cheers.

@JeepsCafe 2 жыл бұрын

Very nice bud! Would it be easier if the rack had castor wheels so that there is no need to reverse the Jeep?

@CheaperJeeperTV 2 жыл бұрын

Hey sunseasurf, Yes. It's a great idea, but they would add more to the cost of the project. Your idea is definitely worth it though for the ease of remounting the top. My plan to use it will be up north at the cottage, so it will be stationed on grass where castors wouldn't work too well. Thanks for the input. Cheers.

@JeepsCafe 2 жыл бұрын

@@CheaperJeeperTV thank you for the reply bud!

@Nicobodian 2 жыл бұрын

Can you do a 3rd row seat bracket for wrangler jlu ?

@CheaperJeeperTV 2 жыл бұрын

Hey Tre, Because of liability concerns, I'm won't likely be doing that. Sorry.

@Nicobodian 2 жыл бұрын

@@CheaperJeeperTV thank you for the reply. 😀

@thekraken2815 Жыл бұрын

Not sure if anyone has asked yet but what changes would this need for a jeep gladiator ? The bed makes it super tough to take off alone.

@CheaperJeeperTV Жыл бұрын

Since the bed is in the way, of the back cross support piece, this system as designed cannot work. Perhaps it will work if the back cross support piece extends across the rear vertical pieces above the level of the bed.

@Tgauchsin 2 жыл бұрын

Clever…

@CheaperJeeperTV 2 жыл бұрын

Hey Pretzel, Thanks.

@adamc2451 10 ай бұрын

Just got finished building this, but I ran into an issue. I have a 2019 2D Sport. All stock and my steaks hit the window then I can lift the top because of the lip of the top to the window. Think I have to shorten the sides by 3”. Do you have a Sahara or Rubicon? I’m thinking that might be my height issue

@CheaperJeeperTV 10 ай бұрын

Interesting. I have a Sahara Unlimited. I bet the tires and suspension components are different from the sport. It does sound like you need to shorten the legs so that the legs hit the side of t he top like in the video. Good luck. Cheers.

@richardweltin1047 Жыл бұрын

Wonder if you could put heavy duty things and fold that rack up for storage

@CheaperJeeperTV Жыл бұрын

That’s a great tip! Thanks for sharing. You’re idea makes it even better!!!!! Cheers

@richardweltin1047 Жыл бұрын

@@CheaperJeeperTV just bought my first wrangler jk yesterday it's a 2012 and I have hard and soft top for it awesome idea for the hard top going to build one soon thanks for the idea

@CheaperJeeperTV Жыл бұрын

You’re welcome. I’m glad the video was helpful. Have fun. Cheers.

@RokinDaCazbah 4 ай бұрын

How long were the 2x4 wood braces?

@CheaperJeeperTV 4 ай бұрын

About a foot.

@RokinDaCazbah 4 ай бұрын

@@CheaperJeeperTV thanks very much sir!

@josephbanda8754 4 ай бұрын

Would this work on a TJ? Would the measurements be the same?

@CheaperJeeperTV 4 ай бұрын

I imagine there would be slight variation between the height of the top from the ground, depending on the Jeep tire size, etc. but it wouldn’t take much to measure. Cheers.

@josephbanda8754 4 ай бұрын

@@CheaperJeeperTV I appreciate the info. I’m not much of a handyman but I’m going to give this a shot.

@CheaperJeeperTV 4 ай бұрын

I’m sure it’ll turn out. It works great. Cheers.

@henrybucki7813 2 жыл бұрын

i see a problem .bumping into the rack and causing the top to hit the driveway . i think caster wheels would be better so you can push the frame into the correct position instead of driving into place.

@CheaperJeeperTV 2 жыл бұрын

Hey Henry, Absolutely! That would definitely make it easier for sure. There is a bit added cost, but it certainly would be worth it. Thanks! Cheers.

@honestabe6507 Жыл бұрын

Nice video. I have 35 inch tires and a 4 inch lift. How do I determine how high to build the frame with this extra height from a stock wrangler? In other words, how tall should the frame be ? Thanks very much.

@CheaperJeeperTV Жыл бұрын

Just place the wood up next to it and determine the length you need. If you over estimate, cut a little off. I hope that helped. Cheers

@honestabe6507 Жыл бұрын

@@CheaperJeeperTV Where should the top of the wood be in relation to where to top sits while intalled?

@honestabe6507 Жыл бұрын

In other words where to top meets the jeep frame

@CheaperJeeperTV Жыл бұрын

The top shelf should be at the height of the bottom edge of the hard top. That way, when the peg is spring loaded against the bottom of the hard top, you only have to lift it 1.5”(the height of the peg) for it to deploy. Then you can just rest it down on the pegs. If you need to adjust the height afterwards to suit your situation, either cut to shorten or add to the length of the legs to raise. Does that make sense?

@honestabe6507 Жыл бұрын

@@CheaperJeeperTV Perfect sense and thanks!!

@kayak77 2 жыл бұрын

Love it! I wonder if this design could be done for removing a roof top tent as well? I'd love some ideas on how to remove a 160 lb RTT by myself. My Jeep with the RTT on it is too tall to fit in my garage.

@CheaperJeeperTV 2 жыл бұрын

Hey Brian, I’m glad you liked the video. I think the first example shown in the video from the Google search is your best bet. Cheers.

@suzannemadden2655 3 ай бұрын

YOU ARE AMAZING! That bungee trick was beautiful.

@CheaperJeeperTV 3 ай бұрын

Thank you for the feedback. Very much appreciated. I'm glad you found the video helpful. Cheers.

@LuisMorales-jz1jg Ай бұрын

just may be , just may be could have added some wheels to roll it back into the garage 👍😅😅😊😊

@CheaperJeeperTV Ай бұрын

True. It would have been good to have mentioned the addition of wheels. Thanks. Cheers.

@donaldchoi3912 2 жыл бұрын

good idea you can install wheels to move it and use clamps to lock it down instead of using scraps and screws…

@CheaperJeeperTV 2 жыл бұрын

Hey Donald, Thanks. Great tips! That will have to make it into next week's subscriber tips. Thanks. Cheers.

@donaldchoi3912 2 жыл бұрын

@@CheaperJeeperTV yes then you can lock the wheels into a stand position and then step on it to release and move it around - cheaper than spending $800 on rolling rack.

@neon5162 2 жыл бұрын

Keeps saying that you have to back up to the shelves while ignoring the wheels on the shelving units

@CheaperJeeperTV 2 жыл бұрын

Hey Neon5162, The one I built doesn’t have wheels to keep the cost down, but adding wheels would certainly eliminate the need to move the Jeep in and out from under it. Cheers.

@neon5162 2 жыл бұрын

@@CheaperJeeperTV ya but what I was saying was you kept showing ones with wheels on them while saying it would be a pain to back up to em

@CheaperJeeperTV 2 жыл бұрын

Ah...I see what you mean.

@PedalsNPetals Жыл бұрын

Why do Yu need to lift the top if it's even with the platform couldn't I just slide it !

@CheaperJeeperTV Жыл бұрын

If you make the sides narrower, you can slide it on if that suits you more. Some people wouldn't want to slide it. Whatever suits you and works! Cheers.