Рет қаралды 24,102
I finally lifted my 2nd Gen CRV and it looks super nice! As I was doing my research here are some helpful tips if you do decide to lift your 2nd gen CRV:
1. A 1-inch lift spacer in the front will lift the car 1 inch (Eg: 1-inch spacer = 1-inch lift | 2-inch spacer = 2-inch lift). A 1.5-inch lift spacer in the rear will lift the car 2 - 2.5 inches - rough estimates (this is due to the rear suspension geometry)
2. You will have to do some sort of subframe drop if you are lifting your vehicle 2 inches or more, to correct the axle angles and remove/reduce axle vibration. I know HRG and Aerogenics sell these.
3. If you do lift your vehicle 1 inch or 1.5 and have slight axle vibration you can get an engine drop kit. I know HRG and Aerogenics sell these.
My 2nd Gen CRV lift setup:
- 1-inch lift spacer (Aerogenics)
- 1.5-inch lift spacer (eBay)
- Tires = Yokohama Geolanders @ 205/70R15
Camera Gear:
DJI Osmo Action: amzn.to/3nPLqjN
Mic = Rode VideoMicro: amzn.to/3pDNFa8
As an Amazon Associate, I earn from qualifying purchases.
If you enjoyed this video or found value, please consider clicking like on the video, subscribing and pressing the bell icon to be alerted to new uploads/content.
Laundry by Tokyo Music Walker / user-356546060
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/laundry....
Music promoted by Audio Library • Laundry - Tokyo Music ...
#lifted2ndgencrv #softroading #2004hondacrv