Lifting Beam Static Structural FE Analysis Part 1

Рет қаралды 15,141

3 жыл бұрын

This video presents FEA Analysis of lifting beam for self weight. It highlights remote point and lifting eye connection, mesh generation, point mass application, loading and boundary condition, remote point creation and results discussion for deformation and stresses, reaction validation, etc.
Please Subscribe to Our Channel: / @graspengineering9249
Please support us on Patreon: www.patreon.com/user?u=19779352
Our Blog/Website: www.graspengineering.com/
Other Similar Videos:
 FEA/CAD/ANSYS Tutorials
• FEA/CAD/ANSYS Tutorials
 ANSYS Space claim Tutorials
• ANSYS Spaceclaim Tutor...
 ANSYS Design Modeler/ CAD Tutorials
• ANSYS Design Modeler/ ...
 Topology Optimization Tutorials
• Topology Optimization ...
 Solidwork Simulation Tutorials
• Solidwork Simulation T...
 Manufacturing Videos
• Manufacturing Videos
 Modern Design
• Modern Design
 Engineering Education Videos
• Engineering Education ...
 Emerging Technology
• Emerging Technology
 Renewable Energy
• Renewable Energy
 Oil and Gas Production
• Oil and Gas Production
 Industrial Valves
• Industrial Valves

Пікірлер: 50

@unurt9781 3 жыл бұрын

I am a big fan of your channel. Thank you always.

@graspengineering9249 3 жыл бұрын

So nice of you

@mohamadkhatib8624 Жыл бұрын

Hi sir hope you are doing well i really appreciate this job and wish you can uploaded more videos like these

@navalfa7291 3 жыл бұрын

Excellent video.

@graspengineering9249 3 жыл бұрын

Thank you

@mangeshketkar7580 2 жыл бұрын

Very nice video and clear.

@graspengineering9249 2 жыл бұрын

Glad you liked it

@vannancherry 3 жыл бұрын

Many many thanks 🙏🏼 Bro

@graspengineering9249 3 жыл бұрын

Welcome 👍

@dmitrilikhocherski8205 2 жыл бұрын

Very nice video.

@graspengineering9249 2 жыл бұрын

Thank you very much!

@softwaretraining-naval 3 жыл бұрын

Thanks Pro.

@graspengineering9249 3 жыл бұрын

You're welcome

@Loma2403 3 жыл бұрын

very useful video

@graspengineering9249 3 жыл бұрын

Thanks a lot

@caglarutku4065 8 ай бұрын

Hello sir. First of all, thank you for the amazing videos you make. I have a question. Let's imagine that we are lifting with the traverse in this video. Let the hole diameter be 24mm. (holes at the bottom of the traverse). Let's assume that we use the cylinder(Ø20) . And let's imagine that we attach weight through these cylinders. The question is, we have the 24mm hole diameter but we use Ø20 cylinder for lifting operation. How many pieces of point mass do we need to select to the hole diameter? Is it half the hole diameter like in this video? To summarize, in the video we chose a piece half the diameter of the hole for the point of mass. Should we choose half the hole diameter for every 90 degree lift? Otherwise, what should be the diameter of the part contacting the hole diameter?

@caglarutku4065 8 ай бұрын

Hello sir, how can you calculate the area or length of middle section of lift eye?

@aslamrauf8437 3 жыл бұрын

Thanks a lot! Sir can i use Solidworks software other than ANSYS software? Do you have tutorial for lifting beam in solidworks?

@graspengineering9249 2 жыл бұрын

We do not have similar tutorial on solid work simulation but we do have few other simulation in solid work software. kzfaq.info/sun/PL3YYYtsmbXgcTD1380fuMkC_jSZYlpN93

@aidilluthfansyah7127 2 жыл бұрын

hi, whats is the different if we use fixed support on lifting eye rather than if we use remote displacement. Thanks in advance. your video is amazing

@graspengineering9249 2 жыл бұрын

You can do both the way either by fixed support or by remote displacement. When you are looking to analyze lifting eye it is better to use remote displacement, as fixed support case will not show stresses; while remote displacement case will show stresses and deformation.

@aakashsajeevan7986 3 жыл бұрын

Please post more videos like this sir.

@graspengineering9249 3 жыл бұрын

Please check description, we have more than 90+ Video's on FEA our Channel.

@fariedonshaheed2823 2 жыл бұрын

Hi, Would you be able to do some calculations by hand to see if you get the same answer as the simulation?

@graspengineering9249 2 жыл бұрын

Yes you can do analytical calculations. The simple way is to match the reaction of the beam model with geometry weight.

@khamphacuocsong1183 3 жыл бұрын

thanks!

@graspengineering9249 3 жыл бұрын

Welcome!

@mangeshbanale9741 3 жыл бұрын

Can u prepare one video on how to import mesh geometry (model) from hypermesh to ANSYS WORKBENCH.

@graspengineering9249 3 жыл бұрын

Its it as same as importing cdb file in workbench. Refer this video, kzfaq.info/get/bejne/jrmJhdF2y7axoXU.html. We will do separate video for HM too.

@viktorsipos-jozsa4241 2 жыл бұрын

Hi,first of all thank you very much for the amazing videos you make!You mentioned here in this video, that it is possible to download the geometry file from the website. Is it still available there? Because I could not find it.

@graspengineering9249 2 жыл бұрын

We will upload for you in the blogpost soon.

@TechnicalEngineeringVietNam Жыл бұрын

@@graspengineering9249 I cannot find it in your wedsite

@offshare2033 Жыл бұрын

Thanks

@graspengineering9249 Жыл бұрын

Welcome !

@farbeenack8548 Ай бұрын

Sir how creating this model

@mangeshbanale9741 3 жыл бұрын

Dear Sir, Can u do geometry cleanup in space claim instead of design modelor.

@graspengineering9249 3 жыл бұрын

Yes.. Space claim is better than Design Modeler.

@ateflaiche4436 3 жыл бұрын

Thanks a lot !! Nîce video!! Please Can you tell me how Can i import Data file into simscape multibody ?

@graspengineering9249 3 жыл бұрын

You need to explore file based on Simscale Input file.

@mayurkulkarni2829 3 жыл бұрын

Thank you can you please do some impact testing please 🙏🙏

@graspengineering9249 3 жыл бұрын

Welcome! We do have few explicit analysis on our channel such as Impact, Drop analysis, etc.

@mayurkulkarni2829 3 жыл бұрын

Sir i am doing a project in that am making a drone with paylod.. i have created 3d model ..what sort of analysis i should perform on frame or as whole assembly??.. ty

@tirathkumar5309 2 жыл бұрын

where we can get the geometry or file?

@graspengineering9249 2 жыл бұрын

It is quite simple geometry. We will try to upload on our blogpost ASAP.

@muhammadibrahim9318 Жыл бұрын

sir i need your help My ansys is stuck at preparing mathematical model after completing 10 or 40 % kindly help i am following all your procedures but still stuck

@graspengineering9249 Жыл бұрын

Cleanup the geometry, reduce mesh size

@ahmedjihad2844 3 жыл бұрын

Thanks alot sir . Can I download this application for Free?

@graspengineering9249 3 жыл бұрын

Yes, you can

@nervousordo 3 жыл бұрын

Good job but I'm having a difficult time understanding your presentation with your heavy accent. Also what program are you using? I am looking for a tutorial for lifting beam in Autodesk Inventor.

@graspengineering9249 3 жыл бұрын

Hi.. We are using ANSYS software . Autodesk also have analysis capabilities, you can follow the same steps to analyze with autodesk too.