Lifting My New Land Rover Defender On 35in Tires (Saltek)

Рет қаралды 11,276

Күн бұрын

The ownership experience of this 2020 Land Rover Defender 110 P400 has been great but it’s about to get a lot more exciting! Who knew you could install a lift kit in 10 minutes? I also install the Saltek Intercooler relocation kit to clear the 35x12.50r20s. Don’t forget to subscribe, Godspeed! #defender #landrover #defenderd110
Huge thanks to these guys!! 👇🏼👇🏼
Saltek Motorsports: saltekmotorsports.com/
OMT Torque Extension Kit: amzn.to/3OmNngS
Black Out Grill: amzn.to/3JZ5bNo
Tail Light black out: amzn.to/3XScYCn
(Amazon Associate Links)

Пікірлер: 54

@steelgatorcrimsontide7403 Жыл бұрын

Wow I did not expect that big of a difference can't wait to see what it looks like with bigger tires

@GodspeedZRZ Жыл бұрын

Me either, thanks for watching!

@ashleylocklear1804 Жыл бұрын

Can’t wait to see it all done!

@GodspeedZRZ Жыл бұрын

Me either

@kristiequalls5431 Жыл бұрын

That is awesome that you can do that

@GodspeedZRZ Жыл бұрын

Haha thanks for watching!

@bendmacmanufacturing2744 Жыл бұрын

Good morning guy glad your enjoying your new ride , and all the upgrades to come !!!

@GodspeedZRZ Жыл бұрын

Good morning sir, Thank you for watching!

@GiovanniLondonn Жыл бұрын

Damn I can’t wait to see it with the 35s on 🔥👀

@GodspeedZRZ Жыл бұрын

Neither can I brother, thanks for watching!

@Jesseholladay Жыл бұрын

Just lift the front, I heard that's supposed to make you the coolest kid in town

@GodspeedZRZ Жыл бұрын

I might just have to try it haha

@Jesseholladay Жыл бұрын

@@GodspeedZRZ $10 says you won't, with picture proof

@gloriafavor4148 3 ай бұрын

Beautiful

@GodspeedZRZ 3 ай бұрын

Thanks for watching!

@warmeds2009 Жыл бұрын

Following.....great job!

@GodspeedZRZ Жыл бұрын

Thanks for watching!

@AubreyOutside Жыл бұрын

Curious to see what exactly you had to trim. I have the 1.5” lift kit, 20mm BORA spacers and 275/60/20 (33”) on my V8 and it rubs just a little on certain turn angles due to the spacers (front wheels only). I’d really like to have no rub though. Rear clears fine. I have the relo kit too but am waiting until I need new tires to go all in there and potentially go to 35” Can’t wait to see yours! Thanks for posting this, it’s well done. Not enough land rover defender mod videos out there.

@GodspeedZRZ Жыл бұрын

I appreciate it, my trim is the SE P400. I know it seems like a stretch but I really think we can get away with it on this one! Lots of help from Saltek Motorsports which has already done it to a couple just no videos on them haha

@bentyson5168 9 ай бұрын

Would love to see you install rock sliders (maybe aluminum ones like Saltek?) and some sort of front winch tray/winch install.

@GodspeedZRZ 9 ай бұрын

That may be coming in the near future!

@craigmclaughlin7870 11 ай бұрын

If you are going to run at this new ride height all the time you need to re-adjust your alignment settings. You’d be surprised how much your camber and toe settings change with the lift rods installed which will lead to premature wear on your nice new tires.

@GodspeedZRZ 11 ай бұрын

I just noticed that recently, I appreciate the advice and will be getting her straightened out soon!

@craigmclaughlin7870 11 ай бұрын

No worries, it would be cool if you could do a video on how the alignment techs correct your angles for the new rod lift. I’m sure there are plenty of folks who would be interested to see the results. These modern rovers are highly sensitive to ride height changes. Dealers will normally put the air suspension in a specific “Tight Tolerance” mode at normal ride hight in order to get the alignment specs within a nominal window. All that changes once you lift the vehicle so at the end of the day you may still have certain angles out of spec and experience some wear. Likewise for the wheel spacers you are using as that will increase tire scrub radius on the front wheels which again can lead to inner edge feathering and wear. It’s the price we all have to pay if we changes settings from stock so it’s a balancing act.

@blakemarchand6650 Жыл бұрын

Looks pretty cool so funny to think there’s a jeep Wranlger over there with stock suspension with 38,s and a screaming v8. But yeah what a weird way to have to lift a vehicle

@GodspeedZRZ Жыл бұрын

Too funny, yeah the Defender is a lot of fun to mess with!

@blakemarchand6650 Жыл бұрын

@@GodspeedZRZ I bet ! Godspeed 👍

@europa4x4 11 ай бұрын

thanks for the interesting video! If it's not difficult, write the exact name of the lift kit, I looked at the site, and I saw only the mounts for the cooler ... but not completely.

@GodspeedZRZ 11 ай бұрын

The lift kit is a prototype from Saltek, they don't sell them just yet!

@europa4x4 11 ай бұрын

@@GodspeedZRZ Thanks

@stephenduva6423 2 ай бұрын

Great video, when you topped up the coolant did you top it up again once the car warmed up?

@GodspeedZRZ 2 ай бұрын

I sure did

@sjduvnjak 2 ай бұрын

How much coolant did you use to fill it up? and what type of coolant? Thanks in advance! My kit arrived from Saltek today and am excited to get it done!

@Malc664 Жыл бұрын

If you lose air out on the tracks can it still be driven with the 35's?

@GodspeedZRZ Жыл бұрын

We will find out soon enough!! That’s a good question!

@hap5121 3 ай бұрын

Do you still have the old wheels & tires that came off of the 110 ?

@GodspeedZRZ 3 ай бұрын

I do not

@brendasmith2183 Жыл бұрын

When do you ever sleep or rest! Lift is great!

@GodspeedZRZ Жыл бұрын

Haha I do sleep, just as little as possible!

@michaelhalstead64 10 ай бұрын

So is the new access height the old normal height?

@GodspeedZRZ 10 ай бұрын

Close it’s about an inch lower, thanks for watching!

@abcd22400 9 ай бұрын

Please tell me the spacer size, 2.5'? 3.0'?

@GodspeedZRZ 9 ай бұрын

30mm spacers

@abcd22400 9 ай бұрын

Thank you❤ Sorry not inches🤣

@danielsilva926 Жыл бұрын

you lift 1.5 or 2 inch?

@GodspeedZRZ Жыл бұрын

2in, thanks for watching!

@inevahdie 11 ай бұрын

Why air quote N.m?

@GodspeedZRZ 11 ай бұрын

Not sure what you mean?

@inevahdie 11 ай бұрын

3:55

@bentyson5168 9 ай бұрын

it made me laugh btw

@sansjamin 10 ай бұрын

No, it's not everything you need.... Lift rods will not lift your defender properly - it's a hack and it has some big cons; ultimately you're running more air in the bags and the suspension can't function properly as it lifts higher... Hence subframe lifts. To do this right you would have done 4" subframe lift and an electronic height controller.

@GodspeedZRZ 10 ай бұрын

Aside from an alignment, that is literally all you need. Maybe not all you want but definitely all you need!