Wow. Look at that angle on the upper ball joint.

Do you need UCA replacement? What type of stress is this causing

How is the ride quality?

I have an 04 F150 Triton...will the 2.5 leveling kit be enough to accommodate 315’s?

Have you guys seen any blatant wear done to the suspension components of guys who run these levels? Do you foresee it happening after a certain amount of time/miles the truck is on the level?

It's weird that he would ask a question to someone in the shop, while recording, on the height difference between the front and back with the level installed. Just a little odd.

I know it's only a leveling kit but is it best to go ahead an replace the shocks I mean you there anyway ? I'm looking to do this to my single cab 2013 ram 1500 but with 22's stock R/T rims with 33's tire most likely atturo trail blade my but I was also looking into the hybrid cause I don't do any off road just city and little country driving

Okay. Imma let everyone know this. On the 11th gen f150 you should only put a 1inch leveling kit on. The reason is the uppercontrol arm will be super close to the coilover. This is very dangerous and I wouldn’t even recommend a leveling kit on a 11th gen. You can tell in the video how close it is. If your really wanting to you could get a suspension lift kit with drop down brackets that straighten everything better than stock and then you possibly could put a 2.5 or 3 but I don’t recommend doing leveling kits at all. Also rough country isnt the way to go either for wanting to put a leveling kit on top of suspension Spend the extra money and get a suspension lift please.

u guys should do one for the 99 2000 ford 1500

Ik it kinda makes it easier to take off another of the shit to get the strut out but u dont even need to do that. Just turn ur wheel all the way opposite of the side ur working on and disconnect ur upper control arm and just slip it out.

Can i get these for a 2001 f-150?

It can be done without disassembling all that.

Looks good bruh. You guys do some awesome work. I just started following you guys and I will continue. Getting ready to soon buy a 2000 F250 and I am glad I came upon your channel. keep the good work up.

I feel like that stresses the whole suspension work. Careful with those ball joints

Was the lower control arm bolts loosened in this process?

how does it fit 7'' lifted with 4'' spacers and 17x10x-24 37x12.50

I have been looking around at lifting my truck and want to run a 6 inch lift with 35x12.5 -44 on a 04 GMC Sierra 1500 and I went to a shop near me and the guy said he would never do a NorCal tuck because it's a major mod and it messes up your truck. Is that true? Also what's the best budget lift?

Do you need different shocks for the level in the front. Would it look fine if you just level the front and not put the blocks in the rear

what brand are the tire and wheels and sizes thanks for the information

I was looking into putting a leveling kit on my 94 c1500, but the website I'm buying it from says I need aftermarket control arms. Is that true???

I can't get the tie rod back on the knuckle. What's the deal?

So know this is a very old video and who knows if you guys still check these comments on it but here goes. I have an 07 with this kit put on by the prev owner. The back was also lifted 2 or 2.5 so it still has a rake but fits 35's with a slight rub at full crank in front. I'd like to go slightly higher in the front if possible but don't know if it's a good idea with the angles of all the joints etc. Suggestions?

that looked like a 5 blot lug and you put a 6 bolt rim on it or am I seeing that wrong? if so how did you do that

I always thought it was so funny how small the axle bolt is on my f150 when my wife's Hyundai has a honking ass 32 mm nut that takes a 6 foot bar to break loose lol

what about a 2001 f150 lift....yall have one on your website jacked up....

I have a 2011 f-150 4x2 and I want to level it out perfect I don’t know if I should get a 2 1/2 inch leveling kit or smaller what should I get to make it leveled perfect let me know thnx

im guessing the rims are 20x12 but what is the offset?

How much rubbing on 33/12.5 with stock suspension on 2013 f150 4wd?

Can you fit 275/70r18 tires on 18x9 wheels with no leveling kit? Anyone have this set up? I want to do this with my 2008 4X4 XLT f150 but don't want to put a leveling kit if I don't need to.

What wheels and tires did he go with? Or at least what size?

Can i run a 3 inch spacer on stock wheels? Just got new fron upper balls joints and new control arms will it hold up? Now the joints nd control arms or oem not the ones that support lifts.

I ordered a 2.5 inch leveling kit. The spacers are 1.5 inches thick. How can they lift it up 2.5 inches?

Hey I was wondering if y'all had any suggestions on an aggressive tire that isn't a mud tred is there one ?

can you do one on a 04 ram 1500 2wd

Will any f150 leveling kit fit on a raptor?

why does my truck after the 2.5 rough country lift i have a popping or hitting sound after a bump?? didnt have it before the lift. i had the struts replaced not to long ago

any suggestions on making a 3.5 level on a 04' f150 with 35s a little smoother. after replacing all ball joints, one wheel bearing and new shocks and springs.?? it almost feels like i ran over a big rock! HELP!!!

Where's the truck from? that rust makes me sad. So glad I don't live in the salt belt.

so...a 2.5 leveling kit only raises the front 1/4 inch??

I see people do different things .basically I have a 2009 Ford F-150 I have a 6 inch rough country Lift kit and I also have a set of wheels I got from you guys. 22 x 14 with 35 inch tires I wanted to change out the tires and put 37” any advice you can guys can give me will be perfect. I seen other people on your gallery where they put a spacer in the front and blocks in the rear to add to the 6 inch rough country two give it a little bit more height what do you suggest I need exactly to accomplish this?

I have a ford 150 05' .And install 2.5" leveling kit and my problem is the upper control arm strain / tension ? need help .thanks !

I have seen ppl say u need to compress the spring and do a 180 degree turn? Do u have to do that or no?

that angle at 3:28 lol

So if I go more than a 2.5" lift spacer like a 3" spacer I will ruin my truck suspension?

I just order some 33x12.5 inch tires for my 2wd f150. It currently sits one inch lower in the front than the back. I know I will have to raise it at least 2 inches in the front so that the tires will fit. Ideally I would like my truck to sit leveled. I was thinking I could put a 2.5 inch spacer in the front and a 1.5 inch block in the rear and I would be leveled and my tires would fit. My concern now is, will these spacers and blocks cause damage to my truck over time?

Wow back yard mechanic much

Can you guys please make a vehicle spotlight on this Ford F-150

So I bought a 3in leveling kit just the front strut block! Do I need to replace my upper control arms now too or can’t it wait??

I spent about 3 hours on this and couldn’t get the bottom of my shock to go in place.

It's a different idea. My opinion not a good one. Drive angle changes go against engineers specs. Your parts will wear out faster. Just leave it stock it's much more cooler

Good video not much explained tho

i got an 08 with stock susension. Does anyone know if i can go 3.5" leveling kit only in the front? i want to fit 35's

Don't hit your tie rod out of the knuckle like that. Good way to fuck it up.

First of all too much stress on ball joints, rusted shocks! And asking how much height? Not professional!

Had a huge 2004 f150 5.4 and the f***** engine went, would suggest u to stop putting money into it lol

U where bald kmow u have hair lol

Torque specs?