Incredible, with a simple camera it is openning so much new possibilities with the laser and lightburn.

Outstanding demonstration, I knew the camera option was powerful now I see why. Thank you!

Wow! This is the first video I've seen that shows what I was wondering about the camera and how much it can replace the red dot laser. Thanks Man!

Getting more and more impressed by your program. Im certenly gonna buy it for my homebuilt co2 laser cuttert as soon as i finnished designing the last parts of it.

Lightburn, you have changed a lot of peoples lives for the better. What a great job you are doing, like Russ and his laser tutorials. i get sick of the smart arse comments like some below. As you say, everyone is a critic. I can say, you guys have helped me make quite a bit of useful coin. I am looking forward to when we finally get to version 1.0. I can only imagine what that will be like. Go USA, always the innovators. Greetings from Western Australia...

That's amazing!

Welp... I'm sold. Great demonstration! Thank you!

Love this! Thank you so much for posting!

That will be handy! Thanks for showing this. I am demoing your software and its awesome. I will be purchasing.

Stunning, i must get a camera for my setup :)

@lightburn Software, I notice that your targets are flat on the bed from when you aligned the camera. But your coaster sits up a little bit. How did you get the camera to align so perfectly? Even with my piece of leather at the same height as my targets, it still seems like my preview doesn't line up perfectly 99% of the time. So I have to line it up and adjust it with framing to make sure the design is exactly where I want to place it. I'd love any tips you have to help!

How would I connect and IP camera up so that it works with LightBurn camera feature.

Do you have a video on how to properly mount the camera ?

can we get a demo on how you are mounting your camera hardware? do I understand that it is mounted at a slight angle under the top lid?

Thanks for this informative video. There's only one thing kid's like more than star trek emblems, and thats coasters.

Hi my Co2 laser has an option of CCD camera will lightburn work with that ? Should I go for it ?

it looks like the camera recognises shapes. does that mean if you printed registration marks around your work. you could use the recognition to do the print and cut alignment process?

The videos you have for the camera is really good. Camera I have purchased have a very crappy quality and I have not been able to calibrated, I have tried and tried and watched the videos and I have read the articles. As I see in all the videos all the cameras have along lens, but the one I have has a short lens and a very low quality.am I doing something wrong?

How are you viewing the camera while cutting?

Hi! We run lightburn software and have a 4k-n lighburn 8mp 120 degree camera for our 60w 700x500. However we cannot get the full be view after multiple attempts at calibration. The corners on the bottom appear cut off and seems like it needs to go further away to get more field of view. Question is, do you think we have to get a wide angle camera instead of the narrow camera we have? They are never in stock so what other camera options do you know of besides the pre loaded lightburn cameras would work with the light burn software? Any help is appreciated. TIA.

Wow. Glad I picked this software and not something else.

Can you record a timelapse or something similar with the camera capability?

Does this need special ruida controller ? Iam going to Import a CO2 machine with 6442 ? Is this enough ?

Excellent demo and amazing software, thanks guys for making our hobby immensely better!! One question if you please, can i use a camera without limit switches on my laser?

What laser machine was used in the making of this video?

What camera is reccomended? I just ordered a OMTech 100w and want to install a camera and obviously a mount lol

if i traced a product and simply scanned it on a printer into the system wouldnt that be the same? im looking at this very question currently. waiting on my engraver to arrive thank you

Ok, I'm sold

I have to say this is amazing!How can we use it on Galvo fiber?

Im super grateful for your software. Unfortunately my eyes have gotten a little old and slow. Is there anyway you could slow down the process of retrieving the wanted image from the junk? Thanks

Can the camera be used with a CNC router with a laser attachment?

Awesome. But... wouldn't that be an underlay?

Very Cool, is there a List of Cameras that are compatible with Light Burn?

Nice video, why do all of the video's ignore the x shift, y shift, width and height adjustments. How do you use them to fine tune the alignment?

rad! Can you show how you rigged the camera to lid? maybe link to a picture? thanks

Quick question before I purchase the software , can I put it on two devices with one purchase of the lisence? Cheers

Bonjour votre camera et branché direct sur la machine laser . Quel et votre branchements de camera merci

Funny, if do the same,, mine cut is off right by a inch form where i put the material, every time, no matter how often i do the to calibration routines.

I just bought a camera. But wondering how I want to mount it. Curious to see how yours is. I have a Chinese K-40. I was going to only mount it for when the lid is closed. But your idea might work. Thanks

Hola buenos días que función tiene esta cámara ya que la compre y no la tengo instalada en mi maquina laser cnc y si yo pongo algo a grabar o cortar en el programa lightbun algún vector esta cámara no vale para pasar y grabaro cortar solo vale para poner una imagen y grabar o cortar es que busco información pero no encuentro nada si usted que veo que es un gran maestro y le sigo sus videos me podría ayudar

question when I turn off the computer when I turn it back on do I have to recalibrate the camera again or setting is saved in the software

Did you focus to the slate? Do I need to leave the original wood on the bed I calibrated on?

I’m considering an 8MP 85° FOV mounted to the ceiling above my 400x400 bed. Is that over kill? I just want makes sure I keep distortion low to increase accuracy, so I thought the smaller FOV would best do that while also making for the most stable mount possible. Is this overkill or should I just go with an 5MP camera? I have really low ceilings in my shop at just 80” high and great lighting, so I’m conflicted. Thank you if you or someone in comments would give your thoughts

are you using the camera that lightburn offers on their site or another camera

But if I have the camera in the flap then the position of the camera changes every time so I would have to have the flap always closed so that the dimensions are all correct ?

Dagnammit I neeeed a camera!!! 😆

Now i need a camera :)

Can I import a file like this into Gsender or do I need to burn it through light burn to take advantage of the camera alignment? How does Gsender know where XY zero is in relation to the image?

if you ad the camera to your Chinese laser you beat the glowforge

Can you use the light burn camera to view a workpiece and then center text you want on the workpiece as well as telling lightburn where to begin engraving?

So no more framing with camera setup either?

When doing this, did you have to set an origin point for the coaster or did it know where to engrave it on the coaster?

Hi, what camera are you using? can you tell me to buy it

How do you get the screen added to the work console

What type of camera? Can I import a JPG file and do the same thing? Can you turn that into a vector?

Does it automatically set the origin to the camera view?

1:45 easier cleanup; select the things you wish to keep, Cut. Select all, Delete. Then paste, and your object appears cleanly.

Using the camera seems to take the place of the positioning..i.e. Current position, Absolute, user... Is that correct?

you can do the same thing with your cell phone and inkscape.

5 year old's don't use coasters it was for himself.! Great video....

which camera is it?

Light burn

How old is your son ? 45 I don't think I believe that story. Great tutorial control + shift to unselecting.

all your demos go to fast and not enough explanations of what your clicking on slow down

Can you redo the audio? Practice talking without “UM, UM, UM” and “ya know.”