Line 6 Powercab Plus Discussion Demo & Review

  Рет қаралды 23,991

Music Gear Network

Music Gear Network

6 жыл бұрын

Purchase the Powercab 112 Plus and 212 Plus Here:
- Powercab 112 Plus: amzn.to/2MHhgJK
- Powercab 212 Plus: amzn.to/36cQYqt
Links above are Amazon Affiliate links which provide us with a small commission and help supports our channel with Zero additional cost to you.
** Correction: In the video I stated Powercab's Volume control affected what gets sent to FOH (front of house). I was incorrect with that statement. From Line 6 Product Owner Brandon Frenzel "The Volume knob on Powercab has no effect on the output level to its XLR output." However, my statement "Whatever mode you are on with Powercab (example Cream) DOES get sent to FOH. I hope this helps clarify" **
If you are looking for a 15 minute (or less) review, than this video is not for you. Glenn DeLaune has a killer review coming in under 15 minutes here: • Line 6 Power Cab Plus ...
However, if you can spare 30 minutes, guitarist Jason Sadites and I sit down with the Powercab Plus 112 Active Speaker System from Line 6, giving you unprocessed amp in the room sounds, form our opinions on the product collectively and discuss our overall thoughts on who this cab is for.
The Powercab Plus 112 Active Speaker system from Line 6 comes highly recommended from both Jason & myself.
Please check out and subscribe to Jason's channel here:
- / gtr111
Facebook Group:
- / line6helixusergroup
Powercab 112 Plus Specs:
• Speaker Size - 12"
• Speaker Type - Custom Guitar Coaxial
• Speaker Impedance - 8Ω
• High Frequency Driver - 1" Compression Driver
• Compression Driver Impedance - 8Ω
• Frequency Response - 70Hz - 20kHz
• Loudness SPL - 125dB SPL @ 1m
• Peak Wattage - 250 watts
• XLR Direct Outs - 1
• Combination Input Jacks - 2
• L6 LINK™ / AES/EBU - Input and Output
• USB Audio Interface - Yes - Stereo/Out
• Presets - 128
• Display - Yes
• Speaker Emulations - 6 (expandable)
• Impulse Response Support - Yes
• MIDI I/O - Yes
• Kick Stands - Yes
• Weight - 16.10 kg (35 lb 8 oz)
• Dimensions (mm) - 567 x 462 x 305
Thank you for watching! If you enjoyed this content, please consider giving it a Thumbs Up! If you haven't subscribed, I would love to have you as a subscriber!
✅ Support The Show Via My Patreon Page. Various Reward Tiers For Your Contributions
/ evhgeartv
Current Patreon Shout-outs to:
• Brad Peddle
• Carlo Santin
• George Karapouloutidis
• Thomas Santiago
• Todd Chambers
• Richard Henry
✅ Follow Me On Social Media:
👉 Twitter: / evhgeartv | / thehelixhour
👉 Instagram: / evhgeartv | / thehelixhour
👉 Facebook: / evhgeartv | / thehelixhour
------------------------------------------------------------------------------------
✅ Please show your support by visiting my sponsors:
• Rode Microphones: www.rode.com/
• The Van Halen Store : www.vanhalenstore.com
------------------------------------------------------------------------------------
✅ I'm Also On iTunes! Subscribe Today:
itunes.apple.com/ca/podcast/p...
----------------------------------------------------------------------------
✅ Fan Mail / Unboxings / Demo Products:
📨 Want to send me items to unbox and/or demo on the show?
Mail to:
EVH Gear TV
PO Box 1759
Ridgetown Ontario
N0P 2C0
Canada
#thehelixhour #evhgeartv #line6 #line6helix #helix #kramerkorner #helixfloor #helixrack #helixlt #hxfx #helixnative #ericbroadbent

Пікірлер: 133
@mmiddei1961
@mmiddei1961 6 жыл бұрын
Kudos to Jason & Eric... so glad to see that you guys were able to get together and create this video. I really enjoy watching both of your KZfaq channels (so informative) and the outstanding Line 6 Helix community in general, it's a great bunch of kind and helpful people with a common goal, getting great guitar tones and creating music! I was fortunate to be one of the first to get a Helix floor unit back in Dec. of 2015 and was totally blown away by its authentic reproduction of tube amps, it was a dream come true for me personally. I've owned and loved playing many tube amps over the past 35 years, Marshalls, Boogies, Fenders, etc. but lugging a ton of gear around is a young man's game. I purchased the Powercab standard 5 days ago and couldn't be happier with the tone and feel of this product, all the hype is true, it sounds killer from bedroom practice to stage volumes and absolutely gives you that "amp in the room" thing that us old tube guys know and love.... All I can say is if you're looking for an FRFR solution try the Powercab, it's the best I've found for my Helix in the past 2 1/2 years bar none!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Hey Michael! This is a great story thanks for sharing! I appreciate the kind words and I am sure Jason will as well. It was a pleasure getting to do this video with him, as I respect him greatly as a musician and valued contributor to the Line 6 community. We had an awesome day together capped off with a Great White concert and hanging with Mark Kendall backstage. Many thanks once again and enjoy that new Powercab!
@ericsmith7287
@ericsmith7287 6 жыл бұрын
Thanks guys, I love both of your channels, both are very informative. Now I wish I never spent all the money I did on my FRFR and waited for this. Of course I didn't know that they were going to come out with this at the time. Great review.
@pastorcharlieryan794
@pastorcharlieryan794 6 жыл бұрын
Two great guys who are some of the best shredders around!! Great show!!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Huge thanks Pastor Charlie! Happy to have you discover my channel! All the best to you!
@glenguldbeck1918
@glenguldbeck1918 6 жыл бұрын
Hey guys, that was time really well spent watching and listening to this video. Just received my Power Cab from Sweetwater and your video absolutely confirmed that I made a great decision!!!! Thanks so much!!!!!!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Thrilled to hear this was of help to you! So happy for you and congrats on your new purchase! Don't be a stranger, hope to see you around here!
@gbeck1114
@gbeck1114 6 жыл бұрын
Absolutely!!!!! Thanks again....
@MikeyGee001
@MikeyGee001 6 жыл бұрын
AWESOME VIDEO. I am REALLY HOPING that Jason starts putting out some killer patches built for the PowerCab Plus. This man and his Preset/patch building talent us unreal.
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Thank you! Indeed his presets are out of this world. However one thing I will say, any of his existing presets that he has written will translate perfectly as is right now (like we were mentioning in the video). Even presets written using headphones sound good on Powercab. Everything translates seamlessly.
@MikeyGee001
@MikeyGee001 6 жыл бұрын
I agree 100%. Jason had helped me with a Preset I created and use as my GO TO preset. Had a small issue with the clean portion and Jason helped me sort it out. That all said, I bought the PC Plus about a week ago and have ONLY run it in FrFr Mode (with the FR Flat voice) and LOVE how well ALL my patches translate. I have yet to play with turning off my Helix Cabs and using the PC Speaker sims but hope to soon. This video makes me even more happy knowing you are both Canadian (well I know Jason is for sure). So yeah, awesome video gents, much appreciated from a fellow Canadian (Ottawa, Canada)
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Hey wicked! And yep I am as Canadian as they come lol...! Myself, I only use FRFR with Variax acoustic and Cream with everything else and speaker/IR blocks turned off. But that's the beauty of this thing, various combinations for various users, all with the end result of happy tone!
@JasonSadites
@JasonSadites 6 жыл бұрын
Thanks again Mike! I am looking forward to creating some cool patches specifically for the PC+ :-)
@MrStephenlederle
@MrStephenlederle 6 жыл бұрын
Ive been obsessing over this product for months now. Last night i finally pulled the trigger and bought one. Comes in a week. This video and both your opinions was a serious factor in my decision.
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
That is awesome to hear! I know I can speak for Jason as well saying he will be pleased to hear that. Thanks again!
@marksvideochannel3592
@marksvideochannel3592 3 жыл бұрын
Im thinking about one, how did yours go?
@steveandrushko75
@steveandrushko75 9 күн бұрын
So here I am 6 years later I revcently bought the L6 212 Cab (with stereo) and I love it
@bobjansen3556
@bobjansen3556 5 жыл бұрын
Nice vid guys, comments and info from a players perspective. Tnx!
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
Appreciated greatly. Thank you!
@RyanChansler
@RyanChansler 6 жыл бұрын
Well done, gentlemen!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Thank you Ryan!
@bloodflower2141
@bloodflower2141 4 ай бұрын
I've just hooked up my HX Stomp via 4 cable method to a tube combo I just bought and it sounds insanely good so im happy for now
@AlecBourneMidiMadScientist
@AlecBourneMidiMadScientist 6 жыл бұрын
Man can that Jason play. Super convincing video guys
@shanewallace4294
@shanewallace4294 5 жыл бұрын
Appears to be the missing link! Thank you line6!
@HickoryTropicals
@HickoryTropicals 6 жыл бұрын
best video on the Powercab just Mic ing the room made a big difference
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Yeah I like the way it turned out. Realistic sound that users will get at home.
@HickoryTropicals
@HickoryTropicals 6 жыл бұрын
My computer is hooked up through my mixer and two Mackie thumps 1300 watts so when i did the playback it was like i was there very clear even when you guys were talking over the guitar playing no buzzing at all
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Oh that is wicked to hear. Yeah you know we could have stuck a mic on the cab or ran direct out and the audio would have been "perfect" but would not give you the room feel. I think we were able to convey that quite well in our approach and from your description I guess it was good! Thanks buddy!
@joernbeineke
@joernbeineke 4 жыл бұрын
... nice vid ... really think sbout getting a powercab and try to replace my JVM rig... which amp model did you use for the patch in the Helix?
@naturebox83
@naturebox83 4 жыл бұрын
Convinced and found one on reverb for a great deal!
@StringBanger
@StringBanger 3 жыл бұрын
If you haven't already either get a 2nd 112+ or a 212+. I got a 212+ and just blown away
@HomeRecordingMadeEasy
@HomeRecordingMadeEasy 5 жыл бұрын
I wonder if a 1x12 solid state can keep up with a full band volume wise. I wonder if you could use 2 of these with the helix if needed. I just got my helix today and with in 10 mins I was blown away by the tone. I started with their Friedman amp model and I currently own a real BE100 and use it with a 4x12 with greenbacks and I got to say that the helix is pretty dam close and with some tweaking I bet I could get the helix close enough to not drag a 65lbs head and 85lb 4x12 cab into a club. Thus far I’m sold on the helix.
@preopticfear
@preopticfear 3 жыл бұрын
Hey Eric, love the channel. Quick question about the Power cab plus. If you have the flat response mode, would it work well to double as an electric drum kit amp as well?
@musicgearnetwork
@musicgearnetwork 3 жыл бұрын
I really appreciate that! I am going to give an answer with caution. 1: It is not even recommended for Bass guitar but I know some people that use it with Bass. 2: I assume one could use it for a drum amp, but the speakers (like bass guitar) aren't designed for extreme low frequencies that a bass or drumkit produces. I think with low volume it may work and sound quite nice. Just use caution though, as I would hate to see you blow a speaker, tweeter etc.
@joepuglia2256
@joepuglia2256 Жыл бұрын
Question for you guys. I have a Fender Hot Rod Deluxe and just bought a Pod Go. Thinking of just getting a Powercab instead of using my Fender because I can just use all downloaded presets as is without messing with turning amps and cabs on and off. Does this make sense to you? I guess I feel like the presets through my amp do not produce the intended sounds of the preset because of having to shut down preset amp and/or cab. I assume the Powercab will solve this and make it simple. Also, can I play an acoustic through the Powercab? Thanks for your help.
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
*Purchase the Powercab 112 Plus and 212 Plus Here:* - Powercab 112 Plus: amzn.to/2MHhgJK - Powercab 212 Plus: amzn.to/36cQYqt Links above are Amazon Affiliate links which provide us with a small commission and help supports our channel with Zero additional cost to you. ** Correction: In the video I stated Powercab's Volume control affected what gets sent to FOH (front of house). I was incorrect with that statement. From Line 6 Product Owner Brandon Frenzel "The Volume knob on Powercab has no effect on the output level to its XLR output." However, my statement "Whatever mode you are on with Powercab (example Cream) DOES get sent to FOH. I hope this helps clarify" **
@marcgib2
@marcgib2 2 жыл бұрын
Jason fantastic player !! Vow
@guitarist100
@guitarist100 Жыл бұрын
I have the Headrush FRFR108 ,only downside as a home bedroom player its dark sounding with my my Pod Go,Boss GT1000 but better with the Zoom g11 for hard rock ,metal stuff,what are the powercabs like ?
@michaelpekala1494
@michaelpekala1494 3 жыл бұрын
I have a Pod go and just purchased the regular Powercab 112. I play at home so mostly lower bedroom volumes. Any suggestions on setting the channel or master volume in the presets themselves. I don't believe I'm getting the best sounds as some presets seem louder than others. Any help is appreciated. I bought the pod go starter kit and want to get the best VH tone at lower volume.
@musicgearnetwork
@musicgearnetwork 3 жыл бұрын
I commented on the other 2 videos you posted the same question on, but here is that answer. I tend to read all comments so you can save some time by just posting a comment once. Happy to help though: Thank you so much for your purchase of our presets! And congrats on the PodGo and Powercab presets as well! Our presets are all volume matched very close, however you will see some jumps a tiny bit in clean presets vs dirty (somewhat). For quiet home playing I would recommend settings the Power cabs volume anywhere from about 8 to 10 o'clock, and put your PodGo on full. Use your Podgo's volume pedal from there to suit to taste, however I always have my PodGo volume pedal full as well too. Keep me posted and thank you again!
@manuelcasabiellesaez3945
@manuelcasabiellesaez3945 6 жыл бұрын
Hi Eric!awesome job,congratulations👍I have an helix floor and I am looking for frfr but since I see powercab I saw that it is a great option too.If I go with the powercab (not plus) I lose something very important?is the powercab best sounding that and frfr?thanks a lot and best regards from Spain
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Many thanks for the comment. There are some considerable differences between both cabs. But depends on what you want to spend. Follow this link and Line 6 has a comparison chart as to the differences between each model. Hopefully this helps and let me know if you purchase one and if you like it! Try this link and scroll down: line6.com/powercab/
@MyJoe1968
@MyJoe1968 6 жыл бұрын
good show
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Thank you!
@spsanders69
@spsanders69 6 жыл бұрын
Awesome walk through! Hey Jason! Great job! I sold my DT25 to get my Helix, and I think I have found my next purchase to go with the Helix. Perfect size to carry around to push the air! So since the PowerCab has the L6Link, can it control the settings on the PowerCab in a similar way the HD500 did with the DT25?
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
I think (don't quote me) but the changes to presets and such on the PC have to be sent via MIDI
@KentBuchla
@KentBuchla 6 жыл бұрын
2:39 “fits into the back of my Camaro.” Of course! 👌🏻
@kylesimmonds9925
@kylesimmonds9925 6 жыл бұрын
Great video! I do have a question though: I have a powercab (not the plus model), but if use the creamback emulation with Jason's patches it sounds very thin? This was just with turning off the cab in the patch. Do I need to turn off all the extras (ie: eq, splits...etc) and just run the amp with effects?
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Thank you! Hmm, what patch of Jason's were you running? And I would not think you have to turn off any splits or things of that nature. Does it sound thin on any other presets?
@kylesimmonds9925
@kylesimmonds9925 6 жыл бұрын
It was his Friedman BE patch he put on custom tone a while back. Running through the flat setting, it sounds well balanced. If I switch to the creamback emulation and shutting of the cab in the patch, the low end is almost totally gone and the highs are harsh to my ears. Haven't done much testing with other patches as I was very happy with the flat setting, but after watching this vid it made me curious as to why my experience with the creamback was so different. I'm sure it's something I'm doing (or not doing). Thanks!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Ok, I'll grab that patch of his (in fact, I think I have it) and will give it a try. As soon as I get a chance to try it I'll comment back here.
@kylesimmonds9925
@kylesimmonds9925 6 жыл бұрын
Great! Thank you for your assistance!
@MB-yw3pv
@MB-yw3pv 6 жыл бұрын
Eric, so is this a speaker emulator or is there amp models built in?
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Hi there. This is technically an "active speaker system" Active (being self powered, 250 watts), it is designed to amplify a modeller's tones (Line 6 Helix, Fractal, Kemper, BOSS etc) in a FRFR environment. However, that is just to satisfy all the FRFR guys. Where it really takes off is the speaker emulation. So, no there are no amp models in the cabinet. That all comes from your modeller of choice. However you do have several speakers to choose from. Think of like this. Take your fav cab you have. One day you feel like pulling out the Celestion and swapping it with something else. You can do that in Powercab Plus with the turn of a knob. Hope this helps!
@AndrewReynolds1
@AndrewReynolds1 6 жыл бұрын
Great video. I have been contemplating getting a Powercab just for home use. It seems you love the Cream model and the FRFR which is available in the basic version. Is there anything on the Plus model that makes it the one to get if you are not loading it with IRs and you are not taking it on stage?
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Many thanks glad you enjoyed it. If you can live without midi and the presets than you should be fine. I think you would enjoy the the standard one.
@HickoryTropicals
@HickoryTropicals 6 жыл бұрын
Crazy Good Wow what an intro Jason is awesome Eric is awesome
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
He sure is! Even Eric Jr says to me this morning "Your friend Jason is really good!!"
@HickoryTropicals
@HickoryTropicals 6 жыл бұрын
Ive been a subscriber of his for a while he continues to surprise me I need lessons from him and you lol you guys are awesome
@JasonSadites
@JasonSadites 6 жыл бұрын
Thank you so much Mike and Eric :-)
@HickoryTropicals
@HickoryTropicals 6 жыл бұрын
Jason Sadites no problem Jason keep on doing what your meant to do my friend
@Shadowcruise99
@Shadowcruise99 6 жыл бұрын
Is the L6 link currently viable between the Helix and the Powercab Plus? It was my impression in your video with Brandon Frenzel, that there was a pending firmware update for the Helix that would be required, before a digital signal path would be viable between the two units.
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
I'm not sure what the firmware will do, however I am running L6 link out right now (just a standard XLR however) and it works fine. And by standard XLR, I do mean hooked up to Helix L6 out and Powercab L6 in. So it does work. But what the firmware will do, I do not know. I am getting some actual L6 cables though. I think the only difference between it and a standard XLR is the resistance.
@Shadowcruise99
@Shadowcruise99 6 жыл бұрын
Maybe I misunderstood Eric. If you're able to get sound using the L6 Link, then it obviously working. Thanks again for all the information.
@tanokbrc5061
@tanokbrc5061 6 жыл бұрын
Powercab or L2m ?????? What's the best option ? Thanks!
@Shadowcruise99
@Shadowcruise99 6 жыл бұрын
I was watching one of your earlier videos on the Powercab and was wondering about routing in stereo mode with two cabinets, Eric. Since I'm not familiar with the routing configuration, if a person were to purchase a Powercab Plus, is there any advantage in purchasing a second Powercab Plus or would a Powercab as a second cabinet perform the same function, in terms impulse responses? In other words would the impulse response loaded in Powercab Plus, transfer over to the second Powercab?
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
If it were me, I would go with 2 Powercab Plus models. Keep everything consistent. I will actually have a second one here soon. Right now, I have my Helix running to my PC+ using L6 link method (not using a proper L6 link cable mind you, and I do not recommend doing as I do lol..) but technically, you can run L6 out of helix to PC, then PC L6 Link out to the next Powercab L6 in and it knows that it's a stereo signal (if your Helix preset is a stereo path). As far as Cab 1 sending IR data along to the next, I do not think it can. But I will certainly inquire! You could also run your Helix out to 2 cabs with XLR, or 1/4 left and rights too. Many options.
@justingiradi9148
@justingiradi9148 6 жыл бұрын
Hey Eric! Could you use this amp with a computer program like Bias FX? Thinking of using in a band setting where a laptop speaker or studio monitors wouldnt make much sense
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
I guess technically you could. If you were using a laptop or something. Because (technically) the Powercab Plus doubles as a USB source and you can output computer audio to it. You know what I will do, I will do a demo (or at least try first) and see how it works and sounds using both BIAS FX and Helix Native. I will get back to you on it.
@justingiradi9148
@justingiradi9148 6 жыл бұрын
EVH & Gear TV Awesome thanks man!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Here is your answer, in a video, just for YOU! kzfaq.info/get/bejne/aJ90qZyIz5iwpJc.html
@ledalius
@ledalius 5 жыл бұрын
I recently purchased the Line6 Powercab 112. After turning it on I've noticed allot white noise/hiss coming out the speaker. Is this normal? I don’t have experience with “normal” amps or cabs. I play my Helix LT trough the studio monitors…
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
Hey there. I did (one time) hear something similar like that come from one of my Powercabs. (I have 2). It was like a loud woosh/static type of sound but is never came back since. How do you have it hooked up to your Hellix? Also, does it make this sound with nothing plugged into it and turned on? If it continues, I would log a support ticket at Line 6. They have outstanding customer service and will take care of you.
@ledalius
@ledalius 5 жыл бұрын
Thanks for answering. The Powercab has this hiss/white noise constantly. Even when not connected to Helix, just turned on and standing alone. My power source should be Ok; I never had any issues with any devices. I returned Powercab and ordered another one from other shop. It makes exactly the same hiss/white noise as fist one. So I assume this is normal. Maybe I’m too sensitive :) I showed Powercab to one Friend, and he said that he thinks his white noise is normal...his Fender Blues Junior has the same of white noise. But if I compare the Powercab to my Studio Monitors Yamaha SH 7, Powercab has like 10 times more hiss noise... So I don’t now that to think :( That do you think? Otherwise I’m very content. The Powercab sounds amazing, way better, more natural than Studio Monitors. "The amp in the room" feel is cool :)
@rhodriwilliams8111
@rhodriwilliams8111 6 жыл бұрын
Great video, so close on pulling the trigger on a helix and power cab and selling my JVM. One question, I play pubs/clubs every weekend. Will this keep up with a drummer? Or is it not even close? Thanks :)
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
I think you will find it will gig no problem. Some places offer a good return policy so make sure you can return it if you do not like it, but I am rather confident that it will work fine for you.
@rhodriwilliams8111
@rhodriwilliams8111 6 жыл бұрын
EVH & Gear TV ohhh I’m so close! Thanks for replying, do you think it’ll need to be linked to PA or it could hold its own... sorry for all the questions! :) Thanks again man
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Never apologize for questions, happy to help. In the perfect world, I would crank it up for me to hear on stage as a monitor/amp, and still run the DI out to FOH. Really excited to hear how you make out with it!
@tazzuk69
@tazzuk69 7 ай бұрын
i am new to a lot of this new tech but i have just got a unpowered Kemper would this cab cab work as a frfr speaker
@musicgearnetwork
@musicgearnetwork 7 ай бұрын
Yes would work nice with it.
@ZO5150
@ZO5150 6 жыл бұрын
Waiting for the 2x12 stereo version. Anyone know if they plan on expanding the range? Metal dudes can’t be showing up to a gig with no 1x12!!!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
I do not think there is anything officially in the works. However, I think the stereo separation between 2 independent cabs would be more dramatic and full. But just my opinion. I'll have a second one here soon and will see what it sounds like in the room here.
@psour33
@psour33 6 жыл бұрын
I don't think that having 2 speakers in a cab working stereo will buy you something great. Buy 2 cabs and put them far form each others and it'll be far better imho.
@ZO5150
@ZO5150 6 жыл бұрын
psour33 Maybe it’s it’s the old school 90’s thrash guy in me, but I just can’t do a 1x12. It was hard enough moving away from a full stack to a half stack. Gotta move that air, gotta feel that thump.
@psour33
@psour33 6 жыл бұрын
I'm a very old 70 Rock guy lol that's why I prefer very old school far speakers stereo ;) Have fun
@richardwilliams1310
@richardwilliams1310 5 жыл бұрын
Line 6 Powercab Plus with a pair of active pa speaker/monitors would be a pretty killer wet/dry/wet setup for adding those stereo effects.
@marcjean3761
@marcjean3761 4 жыл бұрын
Is it loud enough for a mid size church with two other instruments without going through the mix
@musicgearnetwork
@musicgearnetwork 4 жыл бұрын
Yes indeed. I bet you won't even come close to half volume!
@Shadowcruise99
@Shadowcruise99 6 жыл бұрын
I'm still a bit confused regarding the ability of the PowerCab to be played at very low levels and still maintain tone. Could you comment on that Eric?
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Oh man, let me help you on that by saying I was playing last night late, and with the amp on so low you had to strain yourself to hear it, it still had beautiful fidelity. So long story short, stupid low or stupid high, sounds insane good!
@Shadowcruise99
@Shadowcruise99 6 жыл бұрын
Thanks Eric, I really appreciate the reply!
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
You are more than welcome!
@dlees8432
@dlees8432 5 жыл бұрын
im eyeing this unit closely, atm im using a katana 50 in my studio for prac, helix at night for head phone playing. will be great to keep it all on the helix and not have to just play the katana
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
That's awesome that you are checking it out. If you get one, try the Crean setting on speaker emulation mode. It's awesome!
@dlees8432
@dlees8432 5 жыл бұрын
@@musicgearnetwork hey man , r you using the l6 link cable to connect the 2?
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
@@dlees8432 Yes indeed I am my friend. In fact, I have an L6 cable coming from both my Helix Rack and Helix Floor to the power cabs. If I want to play one or the other Helix units, I just swap the L6 cable at the back on the 1st powercab (as they daisy chain). Really awesome setup.
@dlees8432
@dlees8432 5 жыл бұрын
@@musicgearnetwork nice stuff thx man. damn those cables are like 100 bucks in aus lol
@muleblues71
@muleblues71 4 жыл бұрын
Currently using a kemper with SD powerstage and marshall 4x12. Purchased powercab today because of this video. Hopefully will be unloading the 4x12 and power stage soon and grabbing another cab
@musicgearnetwork
@musicgearnetwork 4 жыл бұрын
Wow! Thank you, glad this video helped with your purchase decision. I really enjoy the Powercabs. Keep me posted on how you like it. Happy New Year!
@trayallebach3171
@trayallebach3171 6 жыл бұрын
this might be a better option just as a cab to run the helix through. not even use any of the presets that are in the power cab but just use it instead of getting a power amp and 2x12...hmmmm
@miked9000
@miked9000 5 жыл бұрын
Would be nice if it was midi, to change the cab sound to the patch sound
@bogse
@bogse Жыл бұрын
Stupid me have played Helix via KRK Rokit speaker and I just hate how bad it sounds. I will buy this and hope I finally get that Amp in the room feeling. My under 200$ Marshall amp beats helix now 100-0. Thats because I cant get nothing good out of Helix, or my lame mointor cant produce the sound Helix sends to it. I really hope Powercap Plus can do it.
@bailey12444
@bailey12444 5 жыл бұрын
Are u guys using the line 6 link ?
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
I think in this demo we were going XLR out to the Powercab. Here at home now, running 2 in stereo I am using L6 link.
@bailey12444
@bailey12444 5 жыл бұрын
EVH & Gear TV thanks 🙏
@MartinCraneRockbeast
@MartinCraneRockbeast 2 жыл бұрын
Should have made a way to use the non plus with the plus.
@psour33
@psour33 6 жыл бұрын
Thank's for sharing. I'm not that happy with this thing. It sounds very muffy and I'm a bit disapointed for the price.
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
You are welcome. Hopefully you get better results out of it. I personally love mine, and run it in speaker emulation mode, on Cream setting. Only time I use FRFR is with my Variax as an acoustic. Keep me posted as to your results and maybe reach out for some help in the various Line 6 facebook groups/forums for opinions/suggestions as well. In the end, it may not be the right cab for you. I hope it is though!
@psour33
@psour33 5 жыл бұрын
Thank's. I had much better results with OwnHammer IRs loaded in the Helix (not in the PC) and with the cab set to flat.
@musicgearnetwork
@musicgearnetwork 5 жыл бұрын
psour33 Oh great!! That's awesome to hear. I have just started experimenting with loading IR's into the PC itself. I purchased some VERY cool EVH IR's from Celestion. I have loaded them into both of my PowerCab plus's, and creating presets on Helix that will call up the IR's on both, via Midi. Kinda cool. I think for me (being a newbie midi guy) I am just going to use the IR's in Helix instead. But happy to hear you are getting better results! Thanks for sharing.
@Mrtruthofguitar
@Mrtruthofguitar 3 жыл бұрын
It just isn't loud enough for a gig.I couldn't cut thru the band. It's ridiculous..... Line6, volume should never be an issue. Put it next to a 50watt Marshall JMP and if it is as loud as that, you have a good product.
@marcelblade
@marcelblade 6 жыл бұрын
awesome, too bad I can't afford one yet, 😣
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Hang in there! It will be worth it once you get it!
@justinTime077
@justinTime077 3 жыл бұрын
Oh what beautiful acoustics in this room. The ear shattering reverberations are a part of the pleasure of listening, and let’s not forget Jason’s douche-nasal snoot accent and demeanor. Stroking his non existent beard.
@JoeBoomerMusic
@JoeBoomerMusic 5 ай бұрын
Sounds thin, digital, and can’t keep up with a full band. I just took one back and it’s ok, but nothing compared to a tube amp. Just a friendly review
@musicgearnetwork
@musicgearnetwork 5 ай бұрын
I no longer use mine either. Back to 4x12s (dual) running Helix in 4CM.
@chaisehombre7723
@chaisehombre7723 6 жыл бұрын
>NAAAAh I like tubes.
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
So do I, love them. I do love this as well though.
@teddiehl8116
@teddiehl8116 4 ай бұрын
I like tubes but they have huge drawbacks. They're relatively fragile. They have to be mic'd. They have to be warmed before playing and cooled before moving. Tube equipment is heavy. I have several tube amps, but it's so much easier to grab my fm9 and a cab like this one and spend more time playing and less time setting up.
@cast390
@cast390 6 жыл бұрын
Nice but 1600 bucks to go stereo? i'll pass
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
Not for everyone I guess.
@cast390
@cast390 6 жыл бұрын
Especially when the new headrush frfr are 299 each
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
cast390 head rush is not even in the same city let alone ballpark when it comes to the speaker emulation this has.
@cast390
@cast390 6 жыл бұрын
And whats so spectacular about these? Sounds like muddy crap, you can keep 'em
@musicgearnetwork
@musicgearnetwork 6 жыл бұрын
cast390 you won’t hear stellar audio through a KZfaq video with a mic in the room. And yes indeed. I’ll keep em. 😀
Line 6 Powercab 112 and Powercab 112 Plus | Review
22:08
Guitar Interactive Magazine
Рет қаралды 52 М.
Я обещал подарить ему самокат!
01:00
Vlad Samokatchik
Рет қаралды 9 МЛН
ЧУТЬ НЕ УТОНУЛ #shorts
00:27
Паша Осадчий
Рет қаралды 10 МЛН
Line 6 Powercab 212 Speaker Cabinet Demo & Unique Features
28:23
Line 6 Powercab 112 Plus review & demo // Sounds like an amp in the room!
17:39
Powered FRFR Cabinets Shootout - Line6 vs Atomic vs Friedman
38:28
Andertons Music Co
Рет қаралды 155 М.
This Bridges the Gap Between Modelers and REAL AMPS - Line6 Powercab 112
9:13
Michael W. Westbrook
Рет қаралды 34 М.
HX Stomp and Powercab 112+: Just 1 Amp?
18:43
five watt world
Рет қаралды 183 М.
Line 6 Powercab Basics (Setting Up Speaker Model Switching via Helix)
19:43
Putting the Line 6 Powercab 112 Plus's speaker modeling to the test.
33:29
You Got A New Line 6 Helix Now What Do You Do?
21:42
Music Gear Network
Рет қаралды 183 М.
Do You Need FRFR For Your Modeler? [Here's why I stopped using FRFR]
13:28
John Nathan Cordy
Рет қаралды 135 М.
这是王子儿子吗
0:27
落魄的王子
Рет қаралды 20 МЛН
小蚂蚁被感动了!火影忍者 #佐助 #家庭
0:54
火影忍者一家
Рет қаралды 30 МЛН
😇 or 🔥 ? #shorts
0:43
A4
Рет қаралды 5 МЛН
Why Is He Unhappy…?
0:26
Alan Chikin Chow
Рет қаралды 67 МЛН