LINN tools tailstock DRO review

No video

LINN tools tailstock DRO review - any good ?

Рет қаралды 2,748

Күн бұрын

I don't review things very often, preferring just to get on building things. But this looked interesting so I thought I would take a look.
I was sent this for free, but no strings attached so hopefully you take this as a fair review. Enjoy!
Link to Linn tools ebay site:
www.ebay.co.uk...
Link to my lathe Electronic Lead Screw build series:
• Ep01: Clough42 Electro...

Пікірлер: 19

@seapy2398 7 ай бұрын

Add a selected thickness washer under the sleeve clamp handle so that it clamps with the handle away from the chuck, I would do that anyway, regardless of the DRO. If you are planning to leave it on the mill most of the time then shorten the clamping stud and use a hex nut.

@routercnc9517 7 ай бұрын

Yes that is an option. It’s been on for some time now so just a nut would also work as it has not been removed.

@TheElderlyBiker Жыл бұрын

Looks to be good value....Thanks for reviewing!

@routercnc9517 Жыл бұрын

I've used it a few times now and been very pleased with it. I also put a washer under the tailstock quill lock handle so the locked position is around the other side, keeping it well away from the DRO. That has allowed me to rotated the display even further round so I'm looking directly at it.

@-1-2-1- Жыл бұрын

Thanks so much for making this super informative video. Looks like it will work well for my boxford. One point is that you could shorten the scale to your 65mm tailstock. I cut calipers down in the past.

@routercnc9517 Жыл бұрын

Yes that would work. In fact I spoke to the company and they are looking into shorter callipers. Thanks for drawing them to my attention.

@niksechtniks Жыл бұрын

W0W very impressed by this device! i going to contact them if they may have one that fits my lathe! Tnx for sharing

@routercnc9517 Жыл бұрын

I’ve been pleased with it so see what they have.

@incubatork 9 ай бұрын

An adjustable crank handle would be ideal, those that have a spring to change the position on, cannot remember what they are called.

@routercnc9517 8 ай бұрын

yes that would be handy

@BruceWSims 7 ай бұрын

Thanks for the review! I am in the middle of installing DRO on my own mini-lathe and was curious whether the item that you reviewed could also be installed on the crossslide for the X axis. Couldn't get a clear sight of your knob so your impression would be much appreciated. Thanks in advance......

@routercnc9517 7 ай бұрын

This is designed to fit a tailstock. I think a cross slide would need adapter brackets so I would just buy a generic DRO and adapt it to suit.

@BruceWSims 7 ай бұрын

@@routercnc9517 Many thanks....