No video
Lippert Schwintek Slide Reset and Maintenance
Рет қаралды 43,164
Күн бұрынSee more Genesis products: genesissupreme...
Subscribe to our channel: Genesis Supreme RV
#GenesisSupremeRV
Visit us on social:
Facebook: / genesissupremerv
Instagram: / genesissupreme_rv
See more videos: / @genesissupremerv
Visit our Owners Group: / genesissupremeownersgroup
@matthewpope-fv9bc 8 күн бұрын
Thank you, thank you!! We appreciate this so very much! Got us out of a tough spot!!
@alexbeechen 6 ай бұрын
This was super helpful. We got a new rig and the rear slide got stuck about 4 inches out. We were able to reset the controller thanks to your video and it’s fixed. Sigh😅 Thank you for posting this!
@1bobbylarue Жыл бұрын
Good stuff guys! I've been told holding the extend / retract button depressed for a few seconds after the room comes to a stop on extend and retract cycles will help keep motors in sync.
@genesissupremerv Жыл бұрын
That’s right. We recommend a quick 1-2-3 count going both directions.
@sandblastxtremerv 8 ай бұрын
Thanks Rodrigo 👍
@phillips7188 3 ай бұрын
Rodrigo is a beast
@TomasReyes-wd3ew Ай бұрын
Deberías de acer un video en español mi estimado Rodrigo
@TomasReyes-wd3ew Ай бұрын
Tengo un problema que no el deslizante se mete solo de un lado y cuando sale igual me podrías ayudar gracias por tu video saludos desde Carolina del Norte
@jakebrewer5161 20 күн бұрын
Just curious I work as an RV technician in Missouri and they always tell us not to lube Schwinn text slides anytime I do I use a dry lube just wondering why some people say to do it some people say not to do it on a Schwinn tech
@DanShank-m3g Ай бұрын
Hey guys, I’m glad I stumbled across your video. You called us a reset procedure but page 26 of the manual says it’s a manual override procedure and specifies to re-sync the motors after you do this. Just saying I’m gonna try your procedure as I’m having issues with my slide. Going out one side seems to lead the other. I’ve tried to re-sync procedure prior to trying yours and it didn’t work. Hopefully your process will fix my issue. Thanks for the informative video.
@DanShank-m3g Ай бұрын
PS an added note. I was always told never lubricate the tracks, but your video says to lubricate them. I ordered some of the lube you specified and once I get the slide out, I’m gonna lubricate it. Thanks for that info. Greatly appreciated.
@peteracworth74 Ай бұрын
Yes this is my understanding too. If you actuate the system while in this override mode, the controller will power both motors and ignore any feedback. In my case this gets everything working. Otherwise, both my motors fail due to error 8 and I suspect my system is just overloaded with weight and/or lack of lubrication (going to lube it!) as it would be very unusual to have both motors (or cables) fail for the same reason. I have an enormous slideout and its possible its also just poorly designed/specified.
@paulwhite3265 Жыл бұрын
You have the slides out when you did this. Should they be in or out? Also, when camping i always level before I let the slides out, so they shouldn't bind up right? Also I'm a little confused, because I believe schwintek in their online videos says not to lube the tracks. Only the motor.
@HolyMoly432 Жыл бұрын
The controller for our brand new 2023 Ibex 20mbh is under our slide. Right under the dinette and the only way to get to this is if I were able to shrink down my head to about 4-1/2” and slither under to the middle of slide. So frustrating since we can’t get the slide to go out - it only goes out crooked on one side and and then stops. How did forest river expect people to do this reset after every trip? 😤 This is happening our first day when we brought it home from a dealership 10 hours away.
@genesissupremerv Жыл бұрын
We try to place our in a convenient location for that reason.
@tommytmt 4 ай бұрын
Does it make any difference if the slide is currently in or out?
@dawnmccartneydo5859 9 ай бұрын
My husband just put in a new controller for the living room slide. But one motor is going in when the other motor on that slide is going out. The called Lippert and they said that the controller was wired wrong???? What the.... How do we fix this
@user-qb6ln6rp8w 8 ай бұрын
Did that but still not moving on one side. What now?
@larrydbeal1 11 ай бұрын
That's just an emergency override, that's not a reset. That bypasses the magnetic counter in the motors and sends full power. This should only be done if your slide is stuck out. This could also cause damage to your slide if you're not paying attention.
@AlTraynor 5 ай бұрын
How could it cause damage to the slide?
@dannykirby7425 10 ай бұрын
Use a ptfe lubricant only. It’s a Teflon dry lubricant, never use oil or grease.
@Goat-pe5ox 10 ай бұрын
The manufacturer actually uses dawn dish soap and water I’m sure dry lube would work good too tho
@angelocofino6620 2 ай бұрын
Need to be more specific on how where to lube also area needs to be cleaned.. not so good on service advice thumbs down...
@andysmith8295 Ай бұрын
Not the "S" track itself but just below in the narrow notch. The Guide runs in that groove.
My RV Works, Inc.
Рет қаралды 10 М.
Living With Rob
Рет қаралды 19 М.
Little Enterprises - Metal and Motors!
Рет қаралды 2,1 М.
My Bucket List Day
Рет қаралды 80 М.