Liquid Dump Valves, Trunnions & Floats (Lever Operated)

Liquid Dump Valves, Trunnions & Floats (Lever Operated) | Kimray Beyond the Basics Training

Рет қаралды 1,309

Күн бұрын

📕 Blog: bit.ly/3O9x5IL
🎙️ Stuff About Energy Production Podcast: bit.ly/3opVNYu
📩 Get Updates: bit.ly/3olTVA8
👨‍🏫 Kimray Training: bit.ly/32WFc71
ProductSupport@Kimray.com or 1-405-525-4264
SOCIAL:
/ kimrayinc
/ kimray-inc
/ kimrayinc
PRODUCTS:
Piston Balanced Throttling: kimray.com/products/lever-ope...
Piston Balanced: kimray.com/products/lever-ope...
Diaphragm Balanced: kimray.com/products/lever-ope...
LINKS:
kimray.com/training/how-repai...
kimray.com/training/how-repai...
kimray.com/training/how-torqu...
kimray.com/training/how-weigh...
kimray.com/training/liquid-le...
kimray.com/training/troublesh...
kimray.com/training/how-does-...
TIMESTAMPS:
0:00 Dump Valves & Trunnions
1:01 Connections
1:49 Interface Control
2:30 Sizes & Pressure Ratings
4:10 Hub & Shaft Designs
5:08 Diaphragm Balanced
6:23 Soft Seat
8:04 Delrin Cages
9:19 Piston Balanced
9:44 Piston Balanced Throttling
11:28 Trunnions
12:00 Floats
13:40 Torque Calculator
19:00 Oversized Valves
21:25 Adjustable Packing
22:13 Resources
In this video, Kyle presents the fundamentals to Kimray lever operated liquid dump valves, previously called mechanical dump valves. This product category includes piston balanced, diaphragm balanced, piston balanced throttling, trunnion assemblies (flanged and hammer union), and float balls.

Пікірлер: 4

@JebsTennisJourney 2 ай бұрын

Can you arrange the linkages on an oversized valve to where it only opens 70% at max? The difference in Cv between 4" and 6" (70.1 and 277) is huge. We have a 6" but the 4" would be way to small.

@Darknights1776 5 ай бұрын

How do you get play out of the dump arm or trunnion arm? I constantly have dumps that have so much play. It will dump but with that much play it will drain it all down and have gas flow by until you get a good amount of fluid back in the vessel.

@KimrayInc 5 ай бұрын

It seems most likely that you may have the older style of hub/shaft in your valve and that’s what causing the slop/play/backlash. Updating the internals will greatly improve the operation of the valve. If the problem persists, you can give product support a call and we’ll find another solution. This video should give you all the info you need about that fix: kzfaq.info/get/bejne/eNKGY6aEm6uzqZ8.html

@KimrayInc 5 ай бұрын

Also, if you have a 2" connection size and it's within the affected serial number range, you can get a free replacement of the hub/shaft components. Product Support can help you with that as well. (405) 525-4264 or productsupport@kimray.com