Рет қаралды 83,522
If you have a Litter-Robot III Open Air 3 and it's stopped working with yellow blinking / flashing light and/or the globe does not rotate in normal operating cycle or spinning continuously counter clockwise in one direction, then this video might be for you. You can read more about this repair below, but first, here are the #ᴬᴰlinks to some of the components, parts and tools required for this repair or alternative products you might want to consider:
1. amzn.to/481Nebt | Litter-Robot 3 Connect & Ramp by Whisker - Automatic, Self-Cleaning Cat Litter Box, WiFi Enabled, Works with Any Clumping Litter, Designed & Assembled in USA (Grey), 1-Year WhiskerCare Warranty
2. amzn.to/44ExAQk | PetSafe ScoopFree Complete Plus Self-Cleaning Cat Litterbox - Never Scoop Litter Again - Hands-No Cleanup With Disposable Crystal Tray - Less Tracking, Better Odor Control - Includes Disposable Tray
3. amzn.to/47ZKGKS | MyfatBOSS 10-Pack Carbon Filters Compatible with Litter-Robot 3, Activated Carbon Litter Box Filter Compatible with Litter-Robot 3 Self Cleaning Cat Litter Box Filters, Accessories Replacement
4. amzn.to/3L785QI | Omilik 15V AC Adapter Charger Replacement for Litter-Robot II 2 Bubble,Classic,III 3 Open Air Power Supply Litter-Robot III Open Air Self Cleaning Litter Box Power Cord
Or Click on Amazon link here and search for what you need: amzn.to/3xIOsqg
With this type of yellow light error, if you continue to press power or cycle button, the globe will continue to spin in one direction and the key on the back of the globe might snap out and sometimes the bonnet will come loose.
Of course if your unit is still under warranty, then you should call the Automated Pet Care Products, Inc. DBA AutoPets (www.litter-robot.com/warranty.html), Robot Shop (www.robotshop.com/en/litter-robot-iii-open-air-automatic-self-cleaning-litter-box.html) or any other authorized dealers where you bought the unit from, and have them diagnose via the phone. They will either send you a replacement part or fix it under the terms of the warranty.
If you searched online, it might tell you that there is a problem with excess weight, globe positioning or defective hall effect sensor. Based on our experience however, this blinking yellow light as shown in our video is because of the anti-pinch safety feature malfunctioned or became defective.
Basically, if the globe is blinking the yellow light, you will need to replace the Cat Sensor or re-position the Anti-Pinch safety feature.
The Anti-Pinch safety feature is two pin connected to the motherboard that must touched each other continuously. If they are separated, you will have an alarm (yellow blinking light). The Anti-Pinch safety is located in the bottom back left of the Litter-Robot. You will need to unplug the unit, remove the bonnet, the globe and the drawer. It is the ''Two Metal'' pins. With a flash light, you should be able to see if they are touching each other or not.
If they are not touching each other, try to re-position them with a flat screw driver by pushing them upwards. However, if they are touching each other, you will need to replace your cat sensor.
With Litter-Robot III Open Air, should you have any problems or error lights, the first thing you should do is to empty out the litter, take apart the unit, thoroughly clean it and then put it back together and re-test the unit. Make sure the put the unit on a flat surface and away from the wall or corners. Most of the times, these simple procedures will help you repair the problems you encountered.
In this video, we will take you through the steps on opening the bottom base unit and to remove or replace the anti-pinch detectors.
Sometimes, the flashing yellow light might be followed by blinking red light or timing indicator, and in that case you might have to replace the cat sensor as well. If you need to replace the cat sensor, you check on our step-by-step tutorial video guide here: kzfaq.info/get/bejne/ebSKgtF727bUaYU.html
If you need to order the parts, click on the following link: www.robotshop.com/en/litter-robot-replacement-parts.html
Thanks for watching...don't forget to check the rest of Aiman's "Our Pets In Action Plus Cool Gadgets For Pets Videos" playlist: kzfaq.info/get/bejne/l7qTdbSr2rjemnU.html
Thanks for watching...This video is presented to you by Aiman-Imran Anuar. You can watch more of #Aiman_DIY_Fixit #Our_Pets_In_Action #Cool_Gadgets_For_Pets videos on #EyeOnAiman KZfaq Channel & Facebook Page.
Note: This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. As an Amazon Associate we earn from qualifying purchases.
Recording Date: September 8, 2018
Video URL: kzfaq.info/get/bejne/fs5iptGDy7zZoaM.html