Live Edge Magnolia Wood Bowl

No video

Live Edge Magnolia Wood Bowl - Video

Рет қаралды 9,807

Жыл бұрын

Live Edge Magnolia Wood Bowl - Video
In this video, we will turn a piece of Magnolia Grandiflora or Southern Magnolia into a beautiful live edge bowl. Check it out.
********* TURN A WOOD BOWL UNIVERSITY **********
- Tool Sharpening - For Wood Bowl Turning
www.TurnAWoodBowl.com/sharp
- Tree To Bowl - Understanding Green Wood
www.TurnAWoodBowl.com/green
- Bowl Turning - Start to Finish
www.TurnAWoodBowl.com/turn
START TODAY! Online Turning Courses - turnawoodbowl....
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK
Sign Up Free Now - turnawoodbowl....
_____________________________________________________________
MY MAIN BOWL TURNING EQUIPMENT
• Full Face Shield - amzn.to/392lvuL
• Respirator - amzn.to/3p25omw
• FIlters for Respirator - amzn.to/2Mc4ogZ
• Safety Glasses w/ Readers - amzn.to/3iyGxEI
• Impact Driver - amzn.to/36hshhm
• Faceplate - amzn.to/3tcq7sp
• 5/8" Bowl Gouge (roughing) - amzn.to/2WkixLl
• 1/2" Bowl Gouge (all-purpose, finishing) - amzn.to/38UqQmp
• Live Center (with bearings on tailstock) - amzn.to/3gZxn1K
• Tailstock Extension - amzn.to/30YGIjX
• 1-1/4" x 8 TPI - Four Jaw Dovetail Chuck (w/ screw option) - amzn.to/3m6jEJd
• Slow Speed Sharpening Station Grinder - amzn.to/39ervRL
• 80 Grit CBN Wheel - amzn.to/3fADKJo
• 180 Grit CBN Wheel - amzn.to/37c9zVi
• Oneway Wolverine Sharpening System - amzn.to/33ilNKX
• Beading Tools - amzn.to/3q8CWCd
• Large Calipers - turnawoodbowl....
• Spur Drive Center (MT2 Morse Taper) - amzn.to/3gtha4i
• Curved Tool Rest - amzn.to/3fBbNBj
• J-extended Tool Rest - amzn.to/3oqTkeZ
• Curved Tool Rest - amzn.to/3o4y5Ao
• Spindle Detail Gouge - amzn.to/33je2o0
• Sanding Angle Drill - amzn.to/3l9OcbS
• 3" Sanding Mandle - amzn.to/378DJbP
• 3" Sanding Disks - amzn.to/3q2A0VZ
• Tried and True Danish Finish - amzn.to/3w8lFN7
• Wood Burning System - amzn.to/2Nk6Wd
____________________
Turn A Wood Bowl is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Online Turning Courses --- turnawoodbowl....
Website --- turnawoodbowl....
My Publications --- turnawoodbowl....
T-SHIRTS - merch.turnawoo...
KZfaq --- turnawoodbowl....
Instagram --- turnawoodbowl....
Etsy Shop --- www.etsy.com/s...
Pinterest --- turnawoodbowl....
Facebook --- turnawoodbowl....
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK - Sign Up Free
turnawoodbowl....
_____________________________________________________________
*** TOOL SHARPENING FOR WOOD BOWL TURNING - ONLINE COURSE
turnawoodbowl.....
_____________________________________________________________
*** WOOD BOWL TURNING Start-to-Finish - ONLINE COURSE
turnawoodbowl....
_____________________________________________________________
*** TREE TO BOWL Understanding Green Wood - ONLINE COURSE
turnawoodbowl....
#woodturning #woodworking #turnawoodbowl

Пікірлер: 42

@MANJITSINGH-ko2oi Жыл бұрын

THATS A BEAUTY. WELDONE.

@duckd51w Жыл бұрын

I have turned a bowl like this one, only smaller and without the foot. It was my 5th bowl ever, and out of unknown yard branch from the back yard. An interesting and challenging project. Thanks for the video. You are always informative and well worth the watching.

@jackthompson5092 Жыл бұрын

Very nice live edge bowl Kent.

@darrenthompson6115 Жыл бұрын

Saved me from my full deep cracked log. I’m going to split it and do a version of your… by apply the techniques demonstrated… thanks…

@OregonOldTimerWOODTURNING Жыл бұрын

New to me, adjusting the live center after the outside has been turned enough to see if the low sides match. Eager to try another live- or natural-edge bowl with that adjustment.

@davidbockel5749 Жыл бұрын

Magnolia can be hit or miss. Very lovely to turn and it can spalt very nicely too. Or it can be plain looking and yellowish/white.

@waylandmthomas9576 Жыл бұрын

Lots of Magnolia here in Fairhope Alabama! Nice work as always!

@loucinci3922 Жыл бұрын

Turned out real nice. Let us know the outcome in two weeks. Well....that wasn't the end. I now see how it turned out. Did not crack as I expected. Bark remained on board. Well done. Looks great! Thanks for sharing

@toddhill6396 Жыл бұрын

Another great looking bowl and video

@bwrightaway2877 Жыл бұрын

One of the nicest bowls I ever turned was a live edge walnut bowl. The chunky bark added a ton of character to the finished peice.

@GoogleAreDumb Жыл бұрын

Interesting seeing the rhythmic on/off of the shavings coming off the gouge due to the shutter beating with the rotation! And a lovely end result.

@GoogleAreDumb Жыл бұрын

Might be interesting if you could play around and synchronise the rotation to the framerate of the camera so it looked like the bowl was barely moving but we could see the material coming off. Like watching the bowl magically form in real time!

@qapla Жыл бұрын

Nice looking bowl. Who would have thought a magnolia tree would produce such interesting grain. We have a few of those trees - one of them is at least 75-100 years old. I may have to try turning some magnolia sometime. We also have pecan trees, and they drop limbs fairly regularly. Your use of local wood is very inspiring ... especially since we have much of the same trees as you, being only about 30 miles from you.

@vincentcamus4067 Жыл бұрын

very pretty pieces and in addition it smells very good. well done

@cjswoodworksco Жыл бұрын

Kent I am turning a Magnolia bowl now. Very wet. It sprayed my chip drop cloth with a lot of water as I was turning. Some of the bark came off but it did hold on to the wings. Drying now so on to another bowl. Love your videos. They are making me a better turner.

@PerikovRemont Жыл бұрын

красиво!!👍👍

@silviameijers7292 Жыл бұрын

That magnolia is a beautiful bit of wood and it's wonderful what you've done with it. I've been turning live edge and natural edge bowls from a spalted silverbirch that's been lying around here and your videos have been very, very helpful. So thank you, thank you, thank you and keep them coming :)

@executive Жыл бұрын

Can I suggest that you mount the camera to a tripod, rather than the lathe bed. The steadier picture would allow us to see what you're doing a lot better. There are boom attachments that would allow you to get into the tight spots as well. Thanks for the videos.

@kevinbooth2063 Жыл бұрын

Real nice Kent, Yes I have turned several live edge bowls out of maple, red oak, apple and river birch. I use your method of removing the center and have found it easier to control the wall thickness. My wife has confiscated my apple and maple. Thank you for your classes they are so helpful. Best to you and your family. Happily turning Kevin

@stefanaretz8136 Жыл бұрын

Well done, Kent, Magnolia is really a very nice wood. As a gardener i was so lucky to keep the wood for me after felling an old magnolia tree. The grain is calm and not very dramatic and the bark is surprisingly stable. I didn't manage to strip it off and even after drying it stays in playce without any voids . Even drying in a microwave oven is possible without any problems. And finally the old lady that got me the tree was exited of the first bowl that i offered her..

@MikeB0001 Жыл бұрын

Nice...we dont have magnolias in WNY!😃👍🏻👍🏻

@allyncross6973 Жыл бұрын

Hey Kent, Lovely live edge bowl. It came out beautifully. I have made a few of these (about 5 or 6 I think) and they are fun to make. I pretty much learned how to do it from watching Phil Anderson. Like you he also gives excellent explanations as he goes along. I did pick up one tip the point of balancing the wings if I start out with a drive spur. Most of mine one side is a bit higher than the other but that does not hurt the beauty of the bowl a bit. Good video. Awesome bowl. Yall have a wonderful day.

@threestarfancywoodworks1902 Жыл бұрын

Very nice

@owenpinney3689 Жыл бұрын

Thank you Kent for yet another project that was both enjoyable to watch as well as being so informative as are all of your videos. Your clarity of explanation is second to none and much appreciated. I must keep my eyes open in the future for some 'spare' magnolia, we have some here in Britain most of which are much-loved specimens but there is always hope.

@trurex007lee7 Жыл бұрын

Very nice uniformity and flow. I recently turned a Red Elm live edge. Turned it thin but after 4 days drying inside the house two symmetrical cracks formed at the top of both wings through the sap wood. I put CA glue on to try to stop them from extending further and so far so good. Thought to add colored quick set epoxy to fill 1/8” crack roughly 1” long. Won’t know color to mix in until I sand the bowl and put some sealer on it to get a good idea of a matching or contrasting “feature”.

@dmaschy599 2 ай бұрын

I could be trying to do it soon.Hope i can mske one.

@TurnAWoodBowl 2 ай бұрын

You can do it! Happy Turning!

@johnhelt5475 Жыл бұрын

Thank you for sharing these. I would love learn more about the use of that scraper which seems to be cut like a skew chisel. What are the advantages of this cut as opposed to the classic scraper profile?

@DancingFox6 Жыл бұрын

I’ve turned a dozen or more live edge and natural edge bowls, Kent, and I learned a lot from this video. Great tips for setting up, reassurance that some of what I thought was my lack of skill was really just unavoidable stuff, and a reminder that the bottom will warp and I should check with friends who’ve gotten green turned bowls from me 😊

@chicocash9668 Жыл бұрын

very nice work of course with you it always is but have a question also is that some kind of extension bar on your tail stock and if so is that something home made

@TurnAWoodBowl Жыл бұрын

Thanks Chico! Yes, I use a tailstock extension. Here's a link amzn.to/3GLnRiH Happy Turning!

@reedfrench1649 Жыл бұрын

Awesome! You have a vid showing how you cut a half log into 3 or 4 pieces for bowls. I cant find it

@walterheck7034 Жыл бұрын

I am a beginner and I have done 4 live edge bowl that turned out nice, my question is how do you go about leveling it out after is normalizes? do you leave the tenon and shoulder on until it normalizes?

@michaeltorres6695 Жыл бұрын

Great video as always. Question...would you recommend putting a coat or two of the Tried and True Varnish Oil over top of their Danish oil for added protection or is that overkill?

@TurnAWoodBowl Жыл бұрын

Michael, You can to that. The varnish oil will have more of a gloss finish. Happy Turning!

@jimpartridge9634 Жыл бұрын

Any opinion regarding best month to harvest?

@TurnAWoodBowl Жыл бұрын

Jim, Good question. The common wisdom is fall/winter while the tree is not moving as much fluids through the cambium layer. Although I had a hickory tree that came down in summer from a storm and its bark thought it was wood and the two were inseparable. ;) All the best to you and Happy Turning!

@richardhaas1989 Жыл бұрын

Why not cautious microwaving to dry?

@TurnAWoodBowl Жыл бұрын

Richard, good question. With thin walls like this, the piece will dry in a few days indoors at room temperature. No need to rush it. Happy Turning!

@ivanbukh7576 Жыл бұрын

Beautifully done, but the fungus on the green bowl managed to spoil it in 7 days, which is a pity! It would be better to put it in the microwave right away! I've had this happen before!