Live Event: Time Warp Custom Paint Testing the Avanti Airbrush from Harbor Freight!

Рет қаралды 6,030

11 ай бұрын

More tutorials and supplies here👇
www.amazon.com/shop/timewarpc...
Join us for an exciting live event on the Time Warp Custom Paint KZfaq channel this Thursday at 7 PM California time! In this episode, we will be testing out the Avanti airbrush from Harbor Freight.
During the live broadcast, our host will be using and evaluating the airbrush to determine its quality and functionality. This is a great opportunity for viewers who are interested in airbrushing to see if the Avanti lives up to its reputation.
But that's not all! Our host will be showcasing their artistic skills by painting a vibrant neon-style design using lime line basecoat pigments. You'll witness the creation of an eye-catching masterpiece in real-time.
Throughout the live event, viewers will have the chance to interact by asking questions related to airbrushing techniques, equipment, or anything else they'd like to know. Our knowledgeable host will be there to address all queries and share valuable tips and insights.
If you haven't already done so, make sure to subscribe to the Time Warp Custom Paint KZfaq channel and hit that bell icon to receive notifications about all our engaging live episodes. Don't forget to give the video a thumbs up if you enjoy the content!
We appreciate your support and are excited to have you join us on this creative journey. Thank you for watching, and we'll see you at the live event on Thursday at 7 PM California time!

Пікірлер: 15

@chrisberard6922 5 ай бұрын

When shooting your lime line black base through this Avanti, what ratio should I use to reduce?

@TimeWarpCustomPaint 5 ай бұрын

About 1 to 1

@chrisberard6922 5 ай бұрын

Thank you sir.

@sheilaharp9291 11 ай бұрын

How are you changing your colours so fast with out getting a mix of colours in your spare

@Swampyssidehustlehobbyshop 11 ай бұрын

Empty the paint hopper spray out with a spray bottle of lacquer thinner, wipe out hopper spray a little clean lacquer thinner through the Air brush then load new color. Just that fast and easy.

@joeroberts2860 11 ай бұрын

If you take the meddle out and polish it it will spray better. I put my meddles in my drill and use 2000 grit or finer on the meddles. I do all my meddles even my microns

@RevengeCustomPaintCo 11 ай бұрын

I have one of these airbrushes. It’s not terrible, but it’s no Iwata, either. Hard to beat for the money.

@TimeWarpCustomPaint 9 ай бұрын

Yep still good for the money though

@morbius1189 11 ай бұрын

I was just getting ready to place an order to get some the fine line tape. Does the tape you sell have low tack properties? When I heard the viewer say he has troubles with getting the edges to stay down in the turns. You mentioned putting masking tape on the corners to keep it held down. This concerns me, I don’t want to purchase a tape that lifts. Thanks

@TimeWarpCustomPaint 9 ай бұрын

That happens with all tape that is stretched around corners. It’s just a natural thing you pull in the tape, too hard and it stretches lime line will hold down better than any other brand.

@morbius1189 9 ай бұрын

Thanks, I’ve always used the blue 3M tape for laying patterns for striping, flames, or whatever it is that needs it. Thanks for the reply back, I’m going to order a couple different sizes of your tape.

@frankclarkjr6369 11 ай бұрын

Doesn't have a MAC I see

@MegaWolfman76 11 ай бұрын

Have done a transmission in my 2006 YukonXL twice rear end 3x front diff once and now getting ready to pull the engine due to 2 rod bearings spinning (ENGINE STILL RUNS) @247,000 miles.... Love to airbrush and paint done alot of rc car bodies have videos of some would love to hear your opinion on them if you ever have a chance.... waiting to break in my iwatta neo i got from hobby lobby with there app for 40% off

@TimeWarpCustomPaint 9 ай бұрын

Thank you I appreciate you watch iI