A long grueling 40 mile trip to faraway Fredericksburg!! 🤣😂😋 LOVE Live Oaks. My first memories of living in San Antonio and Austin -- The Live Oaks. Great looking table.

Haven’t been this early since I bought a pumpkin spice latte in July.

I’ve had the Understanding wood book over 20 years. Was a trip seeing it.

I remember watching the series where you rebuilt that bandsaw. It has been a godsend for you, it is like a battle tank of bandsaws. Great foresight on your behalf. I admire how you always try to achieve what your customers ask for. This to me is what sets you apart from the rest. I must say the chemistry between you and Robert is growing so well. It says a lot for you both. My bucket list is to come spend time on a project working with you both. I think it would be amazing fun and such a great learning curve for me. Slingshots and little boys are a right of passage. The body of the table is amazing. The extension give it another dimension. Great job.

LOL. That is ridiculous!! Easily on of the most beautiful tables I have ever seen.

Crazy that the seam from straightening the tops is so subtle! I wouldn't have guessed that would work so well. It took a few replays for me to find it in the finished shots.

I can't get over those legs. The tabletop looks great and the engineering you put into that was really cool, but those legs are just stunning. I love the little bookmatching detail; practically nobody will ever notice, but you get to know it's there and if you showed the client I just know they were delighted by it. And those pins in the tenon...gorgeous!

That table is beautiful. The figure in that live oak is just stunning. Your design, and the work you and Robert did building it are incredible. Amazing job, as usual. This continues to be one of my favorite channels. Over the years, the KZfaq channels I watch regularly continues to change. I started watching your channel when you had only posted a couple of videos. I still never miss one. I always know they'll be worth watching for both the entertainment and the educational value. Thanks for producing this content.

Always good to see somebody else have to think as much as I do. The work becomes a joy. Nice work bud 🔨🔨

I really like how the table turned out

Mi-T-Fine. Beautiful table, nice work guys. One part of your craft that is especially endearing to me is the thought that your creations will be living with some fortunate owners for generations. Enjoyed for the ages.

Fantastic build Andy. Love how you jump in and think things through and take some risk. Thanks for another great video.

I LOVE how those extensions look. Amazing contrast. Well done.

outstanding work!!! so nice to see a large slab takle with no epoxy!

Awesome looking table guys. I live in the mountains of NC right now but lived in Wimberley TX for 15 years prior. I love how live oak looks. Spectacular grain swirl and hard as a rock. I’ve made some smaller projects out of it and it can really humble you. Especially using hand tools!

Absolutely gorgeous! Outstanding craftsmanship.

That’s a beautiful table you have built. The time and effort you put into that project can clearly be seen in it. I am but a amateur sawyer and woodworker but totally agree that live oak is difficult to work with and much prefer to use post oak over it. It’s all plentiful here in South Texas and some can have outstanding figure in it.

Love your work, Andy, you and your partner do it right every time

I think the table is beautiful! Both of you guys did a fantastic job! Keep up the great videos.

Absolutely stunning table Andy, and like always excellent job.

Yep I agree with Chuck Cirelli , everything is beautiful until you get to the end leaf's. And rather than the dovetails a hidden metal mechanical dovetail would be much stronger. And for a home owner to have to add the filler piece, when not using the bread board leafs is kind of a pain ! Plus veneer edging on the vertical legs would have been really nice. But that's just me . All and all it's very beautiful !! Lots of work but in the end it's worth every grey hair !! Ha two thumbs up my brothers!!

Andy your live oak table looks great. I’ve got some live oak short logs that I cut down from a tree in our back yard about a year and half ago. That’s got to be some of the hardest wood I’ve worked with. As an old timer woodworker I plan on making some smaller projects with what I have.

that pie cut is a great tip!

Incredible table and cool design. Nice job!!

The best thing to do with live oak is leave it alone. Beautiful table.

Wow. beautiful table. Finish looks great

Great job, once again Andy. Only you, to pull it off!

Beautiful table what a great job. Thanks for sharing.

Very cool table Andy. Nice job.

Andy, that's freakin' cool. Like, super freakin' cool. Well done Sir, and thank you for continuing to help out the best TV Series ever created.

Beautiful, not sure why your client wanted extensions. Amazing craftsmanship! Thanks for showing how to take on a project like this.

what a great table and very well explained content i enjoy watching your channel and seeing your great work

Gorgeous table bud. Great job!

always enjoy your videos. some of your solving gives inspiration

That is a stunning piece of furniture. The grain is just beautiful. You are a true craftsman

😊👍 Interesting. There a couple of techniques I've not seen before. So useful as well. The sharp corners give some qualms, from the ergonomic point of view. Walking into those accidentally could leave some nasty gouges in the anatomy. .

Andy happy new year to you and your family

Gorgeous. Love it.specifically the top.

Beautiful thank you for sharing. Really enjoy watching you figure things out when things do not go according plan.

Amazing as always!

just one thing to say, Amazing table!!!!!!

Very nice,enjoyed the process.kudos 👍👍👍😎😎😎

"Ow ... finger ... hurt" ... heard many times around my shop (plus some choice additions) I wear myself out just splitting live oak for firewood. I don't know how you cut the veneers so well. Nice saw eh. Beautiful wood and excellent work!

love the table - love the base and love the extensions

Beautiful table guys

Hi from Australia Just discovered your channel and have subscribed. Love your work and will be going back over your previous videos. This table is outstanding and I appreciate your craftmanship. I only make smaller tables but like this design and might scale it down if you don't mind. Regards One Handed Maker

LOve this table, great job..

I just got that book for Christmas!

Amazing, awesome job! The live oak is absolutely stunning- and your skill and workmanship unparalleled- the way you cut and matched the parts together is incredible! Not a big fan of the leafs, but they are utilitarian I guess. But the table, both top and supports- the entire job, is unique and unsurpassed.

Very creative way to get the larger top from those crotches! I have a couple of cherry crotches that I wouldn't mind using for our porch dining setup that could potentially benefit from the same method.

Just amazing!!!!

Beautiful!

Beautiful table.

First off beautiful work! You guys have a great working vibe as well. It would've been awesome to see some smaller breadboard ends when the leafs are not being used.

Gorgeous

still a great table and also a great video

Beautiful ❤

what a magnificent table and workmanship ,not a great fan of the leaves but still looks good

Thankyou Andy!

Table is great, veneer live oak work is extraordinary. I’ve tried working with that stuff- I quit, I had nothing but problems. So kudos on a great job. But those extensions… aside from not matching the table I do see you back there installing some kind of hardware to keep them flat and reliable while in-use. This will involve something custom from one of the many excellent blacksmiths in Texas. It will also involve filling the sliding dovetails in the top, maybe an opposing piece of Live Oak? If there are kids in that house they WILL break the ‘sliding dovetail with plywood’ version. In fact I can see one of them using the extension as a diving board as I write this, so good luck. Finally, any time I have made trestle anything, the trestles did not stay perfectly flat, and or the floor they were sitting on was hooched, so the trestles required some stand-off feet so they only had to touch at four points. Luckily a 1/4” thick pad 3x3 (or square to the thickness of the trestle) glued to the 4 corners is all that’s required to keeo the table from shaking or skating around when in-use.

Beautiful

The contres look really good

I have said for YEARS that the only people who think Walnut makes the best looking slab-based furniture haven't see what a live oak looks like cut open.

The only way this video could have been better is if you ended with the song "Live Oak" by Jason Isbell over some B roll of the table. Incredible stuff as always.

I would recommend using hidden magnets to secure the dovetail fill pieces instead of that center screw

Man I used a slab of live oak to make a plank chair once that had some carvings in it for decoration and I gotta say that it's an amazing beautiful wood but it is HELL on tools. The density of it is crazy and the sheer weight of it makes it difficult to work with. I wonder how many tools needed to be sharpened after this table? Absolutely stunning work though

Gorgeous! Andy your one of my biggest woodworking inspiration brother. Your family and at home shop balance is definitely goals. Question though why glue the tusk/key tenon? I've never used that joint and I'm just curious

Very nice table I’m a little unsure about the sliding dovetails. Be very interesting to see how it holds up,customers are hard on things.

The leafs looks amazing! I really enjoy how you are doing the breadboard ends especially in this video. I have been using your technique since then. Its probably not a new technique but i did see it on your channel. Do you know what season the table will be on The Chosen?

I know it’s hindsight now but would it have been a good idea to extend the 2 channel irons that you spanned the legs with, to support the top, extend them out past the bread board ends to give them support? Enjoy your builds.

Great table, Andy. The way you straightened the slabs with the wedge cut was really ingenious. Did you veneer the edges of the supports or just leave the white oak exposed?

Very nice. I like it. What oil did you finish it with?

Andy- why did you glue the through tenon stretcher and wedge in place instead of leaving it free to knock down? It’s a massive table and judging from your groans it’s equally heavy. Leaving it as a knock down would make moving it easier. The table is beautiful.

Like it with and without the extensions. Looks really awesome! Also, how do you like the Makita track saw? My Triton bit the dust after almost 10 yrs of moderate use and am no looking at the Makita as a possible replacement.

The table is gorgeous. What do you use for finish on your dining tables?

You seemed to be pushing hard on the track saw when cutting the boards, is it because your machine lacks power or didn't you use a rip saw? Normally you should be able to cut this thickness in one go I'd say. Anyway always nice to see your new videos, thanks.

Hey Andy - what would this table cost if it was picked up from your ship? Same material and dimensions.

31:45 why glue? isn't the point of those tenons to disassemble the base so it's easier to transport? Should be plenty strong once hammered in.

Are you being specific about Titebond 2 as opposed to like unibond 800, which dries brittle?

Hope this isn't a silly question:- how come the metal straight edge doesn't move when you are using the circular saw?

Looks great! You may have mentioned it in the video, if so I apologize but, what finish did you put on this table?

What finish is being used for this table?

Nice work! Did the tracks give a sufficient glue up edge??? No need to run it on the jointer?

How did you attach the top?

Love your channel and have learned a lot from you. You do awesome work, but not really a fan of this table with the oak on the ends..

Isn't live oak used for ship building?

whats live oak? red or white oak>?

I’m not sure he realizes how close he was to losing that cord around this point 16:39

White Oak table with Red Oak extensions?

I would imagine that's a $40K + table.

I am assuming the client wanted the extra length with those leafs, but they just do not go. The different gain/color just looks off. Gorgeous table/legs though.

Other youtubers sell push sticks, Rawls sells fingertips. I'm sure you know your bandsaw way better than me, but it looks sketch.

loved the table but the extensions look terrible

First time viewer as this just started after a different one I was watching. Several things I saw that made me ask questions in my mind, but the biggest was the bread board ends. Why???? I truly hope the customer is happy with them because in my eye they are straight up ugly. They don't match at all, they likely aren't very strong, the little strip in the dovetails are hideous, and they just ruin an otherwise fairly nice looking table. Again, I hope the customer is happy. I wouldn't be.

Looks so “comfy”

Base looks great…Table Top also just beautiful…but the leafs are hideous,their killing that beautiful top…sorry but I had to say it….🖖🏻

Very heavy US style I guess ... I like the wood but definitely not the design. Customer's choice ...?

I'm surprised no one wears masks or respirators.

The dog was trying to figure out you are doing to the thing he usually takes a pee on.

. Wow what is it! What does it do! LoL Naaaaaaaa it's great' 👍 LOL 😆 ya goofy m8te from Australia