Fantastic mentioning the offset of the transducers tilt! Did not think anyone else noticed it!

Not sure if anyone else mentioned this, but you can mark your line with ivory soap (or just put some soap near the line) on the aluminum and heat it until the soap turns black. Ivory soap turns black at the same temperature for annealing aluminum, so once it turns black, you can bend it safely without tearing it. Thanks for the vid!

Hey Jesse. Me and my dad just built this whole mount for my kayak today and it’s incredible. You gave excellent instructions! I really appreciate you putting out this types of videos. Thank you.

appreciate it man, you're the reason I can afford a livescope because of people like you sharing, I don't have to buy the expensive Pole and also the other accessory

planning my first livescope build. This video is PURE GOLD. Thank you. Definately modeling it off what youve done.

I really like the simplicity of your design. I made one for myself from the other video and tried it out yesterday. Worked great. Thanks for sharing your design. So much better than all of those plastic printed versions.

Your mount system is BRILLIANT. I just got a livescope from a neighbor, and hope to install it soon. I haven't seen any saltwater videos using it, but wondered if it could be done. That could be so useful that it is exciting to consider. SUBSCRIBED! Thanks for sharing.

Awesome video and one of the best thorough build explanations I've seen on You Tube...EVER!!! And I've watched literally thousands of videos! Usually always some key piece of information is not explained or explained very well, leaving the otherwise video worthless. You did both Excellent! Old School like...which is very rare these days with all the millenials on board...Thanks for keeping Old School Real! Cheers, and God's Blessings always! 🙏💖🙏

Thanks for posting these videos. I copied your build and upon completion, found your new bracket. I’m hoping to get out tomorrow to try out the Livescope. I plan to make this bracket in the near future. I should add that your sheepshead and trout LiveScope videos are some of the only brackish/saltwater videos out there. The videos helped me confirm that this would work for what I need.

absolutely brilliant work mate. I made your original design but haven't got to try it out as yet. I just finished making this new one and it looks the goods. Love your work. Thanks so much

Dude. So awesome to see you upload this. I’m literally on my way out the door to pick up the shopping list from your previous video. Can’t wait to put my mount together. Thanks!

I really like how u describe and video your build video. Simple, easy, and creative. Thanks

This is awesome. I was about to start making version 1 of your mount, but I'm glad it got delayed. You should be on their mount development team 😀 Thanks for sharing your ideas.

I have made 3 mounts from your wisdom the last one i used a piece of 3" alu angle. works great. Thanks

Thank you,this is so simple and cheap and I even feel confident I can do it 👊👊👍

Very well done video. Can learn a lot from you, especially how to organize a shop!

Thanks for your in depth build.will be very usefull

Great how to. Thanks. Made one of these and use it on my Kayak and on the ice. Gave you props in my last video. Thanks again

Dude you are awesome! Thanks for sharing!

awesome man. Very informative and to the point. Thank you!

You sir, are the man! Thank you! Thumbs up!

Awesome video very helpful! Super simple!

I made mine today just like yours. Thank you very much for the great how to video! I'm going to try to mount mine using two one and a quarter tees. One tee mounted on the boat rail the other on my live scope pole with a piece of "all thread " and just pin them together. Maybe it'll work. Tight lines

good vid! going to make one tonight

That’s pretty much awesome!

Excellent idea 💡 👏 👌

Very cool design! 👍

New sub here! Brilliant design. Thanks!

GREAT BUILD THANKS FOR THE VIDEO

Awesome video thank you! 👍

Great job! Thanks for sharing.

that's the way it ought to be done. It's just the perspective mode pointer will be 90 degress off. I just use the pointer as a reference to the left side of the perspective screen instead of the middle of the screen. Thanks for sharing. Tim

Nicely done. Thanks

Thanks! Helped a bunch!

Love your videos man, I just got me a Hobie outback 2020, cant wait to get out there and start fishing

What diameter pvc are you using for this longer one?

Very nice... going to return the perspective mount I just bought and go w/ this method. I've been considering being able to move my new LiveScope from boat to kayak but the "black blox" presents a challenge... do you have 2 units between your boat and kayak or are you somehow able to work around the transfer issue w/ one unit? Thanks again!

Great video thanks

Is there any way to incorporate a lawn mower cable or something better to move the transducer so you don't have to retrieve it out of the water?

ok, I made on of the first brackets and sold that boat (Pathfinder) last june. Now have a Blackjack 224 and making another Livescope DIY. I’ve looked at some of the pre-made mounting systems and thought would like to try the DIY first before investing large $s. Have couple questions though. If I wanted to run the connector up the PVC pipe it would take a 1.25” pipe to accommodate the Livescope connector. that said then would the 1.25” pipe fit inside a 1.5” PVC pipe. I haven’t tried this yet so thought I would ask. Also with my boat it has a couple of the RailBlaza bases on the gunnel so I’m going to try one of their mounting plates to see if it will hold the pipe ok even when I might be trolling. I’ve already ordered a Ram mount C size as a back up. I used that design on my previous Pathfinder. So anyway, will be mounting all this when I get back to Grand Isle, LA end of next week. Appreciate all the work you’ve done sharing your experiences and trial and errors. Thanks, Michael

Great mount Jesse. Having trouble finding the video of the pole build for your boat. Can you point me in the right direction? Thx for great content.

You explain things very well. Please tell me what perspective mode is. Thanks.

Love your video

What size pvc pipe did u use on your panopix arm?

enjoyed the Bully the most!

where did you did the clamp for the pipe with the ball mount on it at ? Thanks

I'm a kayak angler I just got 10" ultra & going add lvs34. I'm looking at different mounts & for pricing I think I'll try building one first. I have access to aluminum at work so I just have buy pvc what size pvc are you using? Can you use any smaller or not?

I woouod like to see the mount on the transom. Looks like you have a ball mount and can tighten it quickly.

Simple and brilliant! And not $99!

Thank you this

Thank you

Nice job. That’s pretty easy. Thanks

so your thru-hole for the 1/4-20 is 1-3/8" up from the bottom of the bracket. Whats the measurement for the thru-hole from the bottom of your pvc?

Nice video!!!

Links for your screws, bolts, washers, and aluminum used?

Thanks for tip. Safety glasses always.

Ware did u get that arm bracket that holds what u made

New subscriber, great video. I went back and watched your previous video, definitely prefer this mount to your original design. How tight are you attaching the U bracket to the transducer head? Should the foam washer be preventing the head from moving or should it be firm but not too tight for minor adjustments? Keep the videos coming.

I know this vid is 4 years old but I'm assuming it would work same way with new lvs34 transducer? Is lining it up for the different modes not as complicated as the manual says? This mark has to be in this position, that mark has to be in that position for perspective, then 2 totally different mark positions for forward then another 2 for down? New to all this and just trying to figure it out

How are you mounting the pole to your boat?

Thinking the first couple of bends would have been much easier while the section of Aluminum was longer? It would have given 1 more leverage? Bend the first 2 then cut?

Thanks for sharing, helpful video! my livescope is on the way, but i want to start building this, and remplacing your botom attachement with a ram mount system... Do you know what type of thred is the original bolt of the lvs32? i will replace it directly with a ram mount ball to screw in it, but can't find the info... Thanks!

what size are the two pipes?

I must have missed it in the video. How is it mounted to the boat?

How deep do you go under hull ?

Great demonstration! Explained perfectly! I would like to see your mount on your big boat. Thinking of buying a live scope, but it’s a bit intimidating with installation. Where is your black box located and what is your power source. Do you also have a Humminbird installed. Thanks!

What the length of your two pipes

What is the piece on the RAM mount that connects to the PVC pipe on your kayak? I see it at 14:53 with the red knob?

Jessie good job on the live scope videos!I was wonder how do you get your sonar images onto your cell phone?Thanks for all the info!

Just looked at it again and really appreciate it. Would give you a double like if I could. Anyways, any chance you can make a few of these and post for sale? It looks simple enough but I don't have a way to heat it etc. Curious if you would consider that. Would be a great help. Also, as you turn it repeatedly, does it now wear out the pipe and get loose? Do you keep tightening it? Thanks again . Just superb.

Great video! One question I have is how did you figure out where the front of the transducer is when it is in perspective mode. In other words if I was looking straight at the transducer that was pointed directly at me what would I see? Thanks

Bravo. Liked.

Nice mount for the yak. I'm considering Garmin Livescope and bass fish exclusively. With the transducer in perspective does it pickup shallow fish between say 3 to 5 feet?

Good stuff sir. I've got everything to build my first mount tomorrow morning, but I'm still not understanding the 5* angle and it's benefit? Is it built in side to side or forward to aft of the bracket? I'm just not getting why it is important?

how do you recommend install pvc pipe to a bass tracker pontoon boat? need to clamp on side somehow.

Love your vids. PVC is legos for adults. Only thing about pvc is that it is heavy. Not sure if you can even by the thin schedule stuff anymore.

What size where your PVC pipes? I went to Lowes today and the 3/4in wouldn't fit in the 1in, so I had to go 1in inside of a 1 1/4in Also, how did you get an H-rail mount to hold that PVC pipe?

U earned urself a sub! What mount u use for the boat?

hy i hate to bother you but i got my mount installed and updated my echomap plus 93sv to latest software 11.20 and went fishing this morning and only had forward and down mode ,am i doing something wrong i went to setup and orientation and it only showed down and forward to chose from thanks ROD

Southern reels fishing do you find yourself using perspective view more than forward view?

What size is pvc?

Hey what ram mount is that. The part that holds ur pole. Where can you get it??

GOOD VIDEO, your shop is to organized LOL

great what size ball mounts are needed???

This is an EXCELLENT video sir! I have my Lv32 transducer on my trolling mtr but when when I try and scan with it I don`t see my little position icon on my screen. You know that little circle that shows the direction? Can you help tell my what I need to do to get it on my Garmin HDU 93sv unit?

Can you comment on how your lives cope pole pulled up out of the water when not in use?

Notice you spoke about using forward scan on livescope,,forward scan is why im thinking of spending the 2k but im just not convinced the livescope is as good as they say,,in you opinion is it worth the money,,i fish santee cooper lakes and need something to scan ponds and deep structure

Hello my name is randy i just bought live scope and im going to attempt to build your design and put on my ranger R91 i really like the set up nice engineering what size was your pvc or cvpc piping thanks in aevance

Can you use the Livescope while trolling? is the pvc pipe steady enough?

Does the transducer need to be below the lowest point of your boat so that the boat doesn't block the signal? How far below the hull does it need to be?

Can you remove your livescope transducer off your kayak for security purposes. Like if you want to put it inside your vehicle during transportation and have to stop in somewhere and don't want the transducer just hanging out inside your kayak

Hey Jessie which garmin livescope transducer do you Use?

will this set up work for a 17 ft boat

I ordered a after market 0 degree mount on ebay

Perspective? Is that a livescope term . On the standard panoptix I haven’t heard that Term. So is that the same as the down view ?

I would like to see how you mounted to the boat

Nice Job! I had to join the navy to become a sonarman tech! You figured it out in your back yard! Ha

Why and perk on the nylon nut?

Hey Jesse, I enjoy your channel. Sometime, we need to get you and Braydon to do a collab. [My son, Braydon Price, KZfaqr]. LOL, he needs someone to teach him some basics of NC coastal fishing. I can't. I'm freshwater guy. Question, I built my mount off your ideas of the Ram mounts. But I have lots of flex. I wonder if this is acceptable... or did I buy a rubber version that should have been metal??? Mostly coming from the piece that glues into the T fitting? Any help appreciated

Do you know if anyone has made these are ready for you and how much are they and I need 1 for 14 football