Thanks steven very good information I appreciate your time

I installed 3 of these to a city hall parliament with 4~5 separate vMix inputs per camera. Works like a charm. Two points. 1) Your PTZ Optics cameras have an older firmware version than mine (in fact mine are VHD but they are the same manufacturer). In the newer firmware NDI has HX2 option too and settings are much more populated / complicated. You can assign a separate IP address for the NDI server and also swich the NDI "discovery" server on / off. However even when it's switched off vMix can find the cameras in the NDI add input. In fact when I turned the NDI Server on the video started flickering for some reason. This confused me a lot since there is no information on these NDI settings in the user manual. I hope somebody explains it. 2) When controlling the cameras vMix have PTZ Optics UDP protocol and i used that. I noticed you are using the SONY protocol which still controls the PTZ Optics / VHD camaras. so i guess no big deal there.

Question concerning the create imput at this position button, can you use your ptz controller device with a joystick to aim and zoom the ptz camera and then use the create input at this position button in the software? Or do you have to use the software to aim and zoom the camera in order for it to work? Great video, I learned a lot.

Excellent video with great and clear explanation

As usual you rock Steve.

tnx ..gr8 video

Great information! I have several questions concerning each video and need to get clarification. This is my first rodeo in this arena. What is the best form of communication? Looking at 3 ptz, graphics overlay on FB and YT for my church. Thanks again! BTW you look alot younger😁

Amazing that each camera angle can be an individual input from within Vmix. And Vmix as well controls the PTZ camera angles. Wow! 🎉 Wondering if the Honey Optics PTZ cameras can output both thru NDI as well as SDI at the same time? (for individual ISO recordings)