For anyone seeing this please put lock tight on your bolts

You really help out these people like me with these older chevys

I had titan 2” spacers on my bronco. Lots of crazy offroad driving, left the ground a few times even and I never had an issue with them. I loved them

You are definitely one of my favorite KZfaqrs keep up the good work

The black plastic piece on the bottom of the truck is for air flow for the radiator. If you have any temp issues remember this comment. I know it looks clean without it. Agreed

you sure do know how to turn some nice trucks into boogied up catastrphoes man

Those tires are hideous😂😂

This helped a lot, I’m only doing the 2wd swap so I can run a spindle lift.

The next thing you should do is put the 24s on the obs

Love the tractor tires always love to see new content your channel is always the go too when i wanna watch something

Thank you for the informative video! I was gonna go with wheels for the 5 lug bolt pattern, but now I have more options for wheels with the 6 lug bolt pattern!

Throw a big ole whip antenna on earl! And tint the windows! Love the vids man, keep em coming!👍 also at one point, Larry’s wheels on earl!

Dude I literally get so pumped when you post a video keep up the good work! You literally do everything I enjoy lol

I dug up this old video to see what adapters you used on the rear and Amazon link didn't work. Can you help me out? I'm getting ready to 6 lug swap mine. I have a lifted 2wd like this.

Those wheels give it such a raw look to it make me wanna get one

Dude that actually looks really surprisingly good, like had someone said they did that I'd say it probably looks like trash but you got that looking like a factory upgrade. Some master art right there lol all jokes aside all your trucks look dope! Thanks for sharing the videos and keep them coming.

Loving the content! I thought I was the only one to use video from an iPhone to line up bolt holes! Lol. 👍👍👍

You could have used a rear axle from a C2500 2wd Light Duty. It’s 14 bolt semi-float 6 lug and it’s a direct replacement.

them tires tho😳 i need some like those on my truck

Hey brother just wanted to tell you thank you for your video you give excellent detail on video as well. Your friend and new subscriber from Austin Texas.

LOL, Larry is so dang wide and Earl is so narrow, it’s funny!

I wonder if there’s a rotor that will fit on Larry that’ll make it 6x135. Sucks finding rims that are 5x135

I highly recommend the Milwaukee 1/2inch impact!! 5.0

Hell yes thank you so much I’ve been trying to figure this out for my 98 Chevy no clue why your in my recommend but I AM HAPPY I FOUND YOU

Great video!! Earl is looking awesome!!!

Looks great on the tractor tires

The tractor tires on it look sick

"You dont need 4wd" no just tall treaded tractor tires and enough horsepower to turn them fast

Issa whole unit brosky!

Your videos are so good! You’ll be in the millions of subscribers before you know it

I use to have a lifted 4x4 the same color and all. I converted it to a 5 speed and all kinds of stuff.

So many 20s and 22s on craigslist right now lol

I saw sun in the millatry they take there herrings and throw them in the grease as hard as they can did it with my fourwheeler worked pretty goid

lol "Earl" nice. named my 90 k1500 single cab short bed "Buford." was my dads and it got passed to me.

My 99 Yukon 2wd comes 5x5 lug standard. It's pretty annoying trying to find rims. 5 lug universals don't fit neither. So I'm going the same route as you. I'll keep you posted on how it works for me by the 24th when the parts come in. Putting 22" rims on.

Hello, my 95 Silverado c1500 2wd won't require adapters for the rears? I can use regular ones like the 6 lug front rotors? Thanks bro!

I went to your oreilly link and it said wont fit my vehicle which is 93 C1500 Suburban vin with K but i also know oreilly parts can say that and be wrong. This is why im wondering if you know if can do this or not? Thanks

The 4wd rear is wider, so that would help you push the wheels out in the back.

I am going to be doing this to my 95 F150, the rims nowadays are nice and on these old square bodies, look alot better

I have a 1990 gmc suburban k1500 , I want to put 6 lug on the from I swap out the rear diff for a 2018 Chevy 7z1 Chevy 6 lug

Usually put a lug nut on cut the stud then back the lug nut off. Just for safe measures lol

Those tires make the truck look good I like it

one of the best youtubers out 👍make her loud !

Love it got to do mine

Man That’s one straight body on that obs

Did you mention what width spacer you used for the back? Also have you had any issues with them coming loose at all or any drivability issues like vibration? I’m considering doing this to my OBS so I can run trail boss wheels on it. Thanks.?

Wanting to do this on my wife's 99 burb. For the rear axle I will get the axle from a NBS suburban. That way it will have 4 wheel disc brakes. Then it's getting a 6.2diesel and a th400. Was in junkyard today. Saw a 2500 van with the 6lug rotors. Of course the gears in my head started turning

That truck is so rare being that clean

Hey where are you got to do is put the six lug axles out of wheel drive rear end right into your 5 lug axle 2wd rear end no problem you just have to use the six lug brake Hub too or take your 5 lug axles and hubs to a machine shop and let them drill and tap it to a 6 lug chevy, I did that on a 9-inch rear end for $80

Great video and you are telling the truth. I have always had 5 lug tundra 07 and up with the rare 5 by 1.50 pattern and I'm running 2 inch spacers to change lug pattern to 6 by 135 Ford for my OFFROAD RBP wheels and even more my wheel offset is negative 44. It's got a stance so wide I had to shave front bumper edges and wheel well etc

Clean truck. Best to torque down the bolts and use loc tite

I got the same truck but white those tires look sick

So.... issue im running into is the 20 inch wheels i have wont fit on the rotors. I got the rotors and bought the wheels off a buddy. Tonight i wanted to make sure the rotors would fit the wheels and the center hole on the wheels are too small for the rotor to fit flush against the wheel. The wheels came off a 2005 gmc yukon denali so i figured theyd work. And if i do spacers i dont think theirs gonna be much thread holding the wheels on. Any ideas?

That setup suits the truck tbh

Did you call them clat wagons? That’s funny!

This guy must be from Lawrenceburg or Pulaski Tennessee.

I ran adapters off of Amazon on my cateye and I was stranded when the adapter split open and my wheel fell off

I’m recently put titan 6 lug on my c1500 put loctite on also my driver side rear wheel took a trip to the ditch.

Only thing i would do different is get hub centric and ditch the tractor tires i recommended venum wheel accessories they have all sorts of truck stuff and conversion stuff even 10 lug conversions

Nice set up

Is there a way you can fix the link to the rear adapters you used please as I clicked and it does not work.

You know buddy. I think to complete your collection. A nice square body chevy an a brick nose ford would be awesome. I mean i am not a expert on nice fleets or anything haha. But hell these trucks is beautiful man glad i subed

Thanks this video help alot

This dude really just broke the lug nuts loose with a 3/8 s ratchet

Sorry I have a 2000 f150 I know what you say , but you can show what exactly you do in you 97 lariat with the wheels . Thanks

True duals with like 6 inch rolled edge tips would look and sound nice

I have a 95 suburban 1500 2wd. Will this work for me, Same size adapters and everything? And can I tow safely?

Yes now i can buy snowflakes for my 94. Thanks

Very nice. I have a 94 silverado. Do you think this setup will work for it as well?

The rear isn't available anymore

Where could I buy the same adapters?

I didn’t know there were some obs’s were 5 lug. 3 of my friends had obs’s and they all were 6 lug

Where did you find a lift kid for a 2wd I have the same truck and I want one

Looks good young man

4wd rear end is wider so it would roughly be about the same front and back

2wd 1500 chevys were 5 lug in the late 90s but the 4wd were 6 lug

Will those front rotors work on a 1994 year of the same truck?

Where I can buy the 6 lugs bearing for a jeep cherokee xj 2001

What's your paint code on your c1500? You the name of it??

Did you use the same adapters 5 to 6 in all 4 !?!?

I'm looking to do this on my s10 but noticed we got the same old school toolbox

So what about stock ride height on an obs? I want to run 24s on streets on stock ride heigh but I'm wondering if it will look weird without it being lifted and wondering if the back wheels will stick out further than the front with the adapters installed on the rear

Truck is a beast! Obs looks good with a lift and would be nice to see how the 24s on larry would look on it

Keep up the videos!

Newer Silverado rear ends are wider than the older c1500 just fyi

The nut was too loose .need to go to next hole

What if my back rotors are also disk instead of drum? Could I just replace the rotors the same as the front?

24s on Larry and 12 wides on the obs

I think you should put stright pipes on it

This just saved me so much money

Now you need a 97-98 dodge and you’ll have her made!!

So the videos been out for 2 years, how have the titan adapters held up?

nice build dude i like it

I'm having the same problem I've got a 1995 all-wheel drive Astro van that's five lug that I was wanting to trade my six lug wheels from my 03 Astro van

Where do u find these clean trucks. I look and look and people just dont take care of them so they're all destoyed

Bad beast buddy love it

The link is broken for Amazon

You can just change the axles outa the rearend.. Very easy.

Is there any way to go from a ford 6 lug to a Chevy 6 lug? I have a 2015 F150 and want to run Chevy reps. I’m not wanting to run adapters

Do you have subs in those truck? If so you should do a video about them. Or put some in there