Loading gauge and continuity testing with Thomas the Tank and Ge 45 ton
Рет қаралды 77
Ай бұрынEdited by YouCut:app.youcut.net/BestEditor
@davidwhite1864 Ай бұрын
Well Thomas made it round. Have you thought about soldering jumper wires over the rail joints John.
@bikerides Ай бұрын
Hi David, I have a mixture of continuity methods. I have soldered write across some joints. I went through 4 irons to find one that worked and even then melted sleepers. I have used rail clamps from a few sources. I have put screws through the fishplate into the rail. If the cleaned up joint doesn't work I can use one of the methods above. cheers, John
Lawrie's Mechanical Marvels
Рет қаралды 564 М.
Aissaule Bakytbek-Kaidarova
Рет қаралды 700 М.
INWAYUP | БИЗНЕС | МОТИВАЦИЯ
Рет қаралды 10 МЛН