"Maybe this was not a challenge lock." Bill cried at that moment...
@benjaminhackett88965 жыл бұрын
“Not challenge” as in still as is from manufacturer, no special substituted pins, etc. Doesn't mean it's not a challenge. ;)
@kd5nrh4 жыл бұрын
It took LPL more than a minute. It's a challenge.
@canesvenatici95884 жыл бұрын
The high precision of the lock manufacturing tho... In theory if somehow they could manufacture an exactly precise pins and holes there's no way it can be lockpicked that way. We're using the fact that they can never make and exactly the same pins to pick the lock.
@notTheDutchBoy4 жыл бұрын
@@kd5nrh yeah it is one
@Zangamarth4 жыл бұрын
For what it's worth, Bill has repeatedly described LPL as an absolute masterclass. "A talent that comes around once a generation" I believe were his words.
@Monscent4 жыл бұрын
Over a minute. This is an extreme premium deluxe security lock.
@LivingDeathGuy4 жыл бұрын
Albert Rieder it’s the simplest Italian lock
@heikopanzlaff37894 жыл бұрын
10 to 20 bucks here in Germany. Something for inner doors or office doors. Here it is called " Standard Profilzylinder " Keys for that can be copied in every DIY - store in Germany.
@danieltroger17614 жыл бұрын
Fuck. I’m trying to pick this with a screwdriver and a hairpin rn 😭
@mr.froschi65264 жыл бұрын
@@danieltroger1761 did you open it?
@danieltroger17614 жыл бұрын
Mr.Froschi Yes, but I found the keys and opened it with them lol
@manasdas87935 жыл бұрын
I heard locks have a naughty picker bucket. LPL is in it.
@cookieoppressor97005 жыл бұрын
Nah, he is the bucket
@The_Modeling_Underdog3 жыл бұрын
The man even compliments the lock makers for the excellent tolerances. He picked the lock, yet he aknowledged the craftmanship. That speaks volumes of him. Guess Bill didn't shoot him in the leg after all.
@GashimahironChl2 жыл бұрын
When in doubt, shoot both legs
@BJ-uncensored6 жыл бұрын
If you listen very closely... You can hear Bill reloading his glock.
@razinhailsharp6 жыл бұрын
It's not even noon and I've already found the comment of the day.
@Shad0wBoxxer6 жыл бұрын
Omg yes... all i can think is that all of this has to be frustrating as fuck
@NJ-wb1cz6 жыл бұрын
Brian J, are you implying Bill was reloading his glock while watching LPL fiddling with his cylinder?
@dlevi676 жыл бұрын
"Nice click out of 38"
@deranathonarkantos67125 жыл бұрын
🤣
@billycross27164 жыл бұрын
other pickers: just use the exact amount of tension you need LPL: Just f** wrench on it
@Kempeth3 жыл бұрын
So how much tension would you recommend for this? LPL: Yes
@billycross27163 жыл бұрын
I have my tension wrench here set to "all of it"
@SpencerHHO3 жыл бұрын
LPL has publicly said he uses as heavy tension as possible and that the advice of using as little as possible is essentially bs and given his track record I believe him lol.
@thinkinyblinko66663 жыл бұрын
It's so much easier with heavy tension.
@todddouglass8703 жыл бұрын
LPL stated in one of his videos that he had tendinitis from tensioning and switched to his offset (bent) tensioning wrenches as a result. So yes that would be a lot of tension!
@TheJohnRowley5 жыл бұрын
When you pick a lock your way of talking reminds me of being at the dentist
@deadlypotato79535 жыл бұрын
John Rowley yes very true
@benjamericana10885 жыл бұрын
Anyone with glasses heard an optometrist. What's better one?... or two?...
@itsme-ow1nn5 жыл бұрын
Oh don't, I love watching these vids but now I'm going to be thinking about my dentist (that I don't like). Lol. Its true though, sounds very similar
@itsme-ow1nn5 жыл бұрын
@@benjamericana1088 ye, I feel you. "& now, 1 or 2" change the glass "& now 1 or 2" lol
@Mirandorl5 жыл бұрын
I am so glad I am not the only one who felt this :) At least theres no high pitched drills
@MrSchuetzendorf3 жыл бұрын
Watching this video at 3:00 am. Recognize that this is the lock that is installed in our front door. Now i can fall asleep again.
@archangelshiro3 жыл бұрын
The shape of the keyway is what makes this one particularly wild- not the shape of the lock itself. Yours is most likely a schlage key, google a typical schlage key and see if it looks like yours! ;)
@KidMillions3 жыл бұрын
Burglars don't pick locks anyway, they just throw a rock through the window when you're not home.
@CptGreyhead3 жыл бұрын
Except it would take no time at all to just snap it to gain entry. Great challenge for lock picking but by no means secure at all
@nix-cipher3 жыл бұрын
I know your reply was 11 months ago,but I felt the need to reply...lmfao! I have one of those "special locks" (not this one,but a 'Padlock') for my Harley when I tow it to Daytona every year. The Lock company's brochure bragged about its durability &'unlockpickyness'(lol,my 4yr old childs word,lol). Lock pick Lawyer picked my lock in under a minute. I hope your Lock is still Locked & secure! Cheers from New Zealand!
@boogboog80972 жыл бұрын
Lol
@hoilst6 жыл бұрын
Who wants LPL to narrate stuff? Not just lockpicking.
@peak0iler6 жыл бұрын
He has very high verbal IQ and oratory skill, which stands to reason as he's a lawyer and sounds Jewish.
@Govrin.5 жыл бұрын
@@peak0iler wtf
@karuza825 жыл бұрын
He is very pleasant to listen too. Reminds me of Mike Rowe.
@jonrutherford68525 жыл бұрын
I'd welcome voiceovers by LPL for any good documentaries. So welcome, and so unusual, to hear such crystal clear delivery.
@effingeffwerd43535 жыл бұрын
If you like his voice, try checking out Lofty Pursuits. The candy maker sounds very similar.
@PoorWorksmanship2 жыл бұрын
So from all the videos of yours I've watched, that seems like the very best way to make a pick resistant lock is just by making a lock very very well. The security features and anti-picking tricks seem to have less of an impact than really good tolerances and really precise machining.
@paulaus6 жыл бұрын
Can someone make a ten hour video of LPL just saying "Nothing on one..." etc. It's so relaxing to listen too.
@starbarrothschild65976 жыл бұрын
And sounds like my dentist
@Slash10665 жыл бұрын
Not to mention the sheer exhilaration of getting a click or some movement on the core...
@FrostMonolith5 жыл бұрын
With permissions this should be doable
@jorceshaman5 жыл бұрын
@@FrostMonolith Definitely permission since he doesn't even need to hire a lawyer.
@Greippi105 жыл бұрын
Two is binding.
@FunkyPants3D5 жыл бұрын
So I started lockpicking two days ago. This exact model is one of the five locks I found in our basement. Now I dont feel so bad for not getting it to open. Thx for the info xD
@nighthunter30394 жыл бұрын
He piked it upside down so....
@that_escalated_quickly27204 жыл бұрын
@@nighthunter3039 yeah it's all upside down in the US if it comes to locks as far as I know... In Europe most of the cylinders and their casings are in doors 180 degrees turned...
@nighthunter30394 жыл бұрын
@@that_escalated_quickly2720 yes your right they are ^^ (I'm european)
@Sk1tz0924 жыл бұрын
@@nighthunter3039here in Netherlands all locks are just normal? With the narrow side of keyway pointing down
@whuzzzup4 жыл бұрын
Yes you want locks installed this "normal" way (slim side down) because it makes the not spring-loaded pins (in the thick side), fall down.
@shungupatsika2 жыл бұрын
I like how LPL refers to pins as “him”. You can hear he has a connection with the locks. It’s like he can sense their “personalities”.
@thankyouforyourcompliance73864 жыл бұрын
The LPL must have a 5D storage room with every tool in the Universe in hand's reach.
@cesk48993 жыл бұрын
LPL, This gonna be the last time Bill allowed you to go through his naughty bucket. You made it too easy.
@michaellynn97633 жыл бұрын
This is the biggest endorsement of security for this lock manufacturer! If it takes LPL over one minute, I’m defo having it!!
@telofy2 жыл бұрын
I also found BKS locks generally hard to pick, yet when I took them apart, there was nothing special inside. I also attributed it to particularly precise production, specially since it’s a common theme with BKS locks.
@peterwelsh69756 жыл бұрын
I think the many clicks is because of the master wafers. You actually have 10 possible "set" positions. Think BB only uses light tension it seem like LPL heavy tension preference is much more effective.
@ScottKenny19785 жыл бұрын
I know zip about picking locks, but looking at the parts (and knowing how the lock has to move), that was my thinking exactly. Gotta pop up both the master wafers and the spools. (Note to self: if ever designing a lock, add master wafers to all pins, just to increase pick time.)
@jefff46865 жыл бұрын
@@ScottKenny1978 I also know nothing about lock picking, so I very well could be wrong here, but I believe the master wafers actually just create two sheer lines in the slot they are in, so it wouldn't actually make picking take any longer as it's not a false set, but two proper sets (one for the key that comes with the lock, another for a master key that unlocks many locks in a set). I think just using spools in every slot would probably be much better for increasing picking time.
@rxonmymind83625 жыл бұрын
Did you see how far that tensioner/pick was bent? I think you are correct.
@Sailing_Bungaree5 жыл бұрын
Scott Kenny master pins actually make it quicker to pick.
@narmale4 жыл бұрын
so true, I see those tension bars bending almost in half, his finger going white from all the pressure... im like OHHHH this is what I was doing wrong!
@toportime4 жыл бұрын
"Maybe it was just the precision of the lock." Hearing that from LPL is pretty good praise.
@TenchiJeff4 жыл бұрын
20th level Rogue with a Dex of 20, custom made lockpick tools with a +2 bonus, and another +2 for having a magic Belt of Lockpicking.
@Atma_Weapon4 жыл бұрын
lets not forget the bracers of lockpicking +1 and the ring of lockpicking +1.
@IndigoIndustrial2 жыл бұрын
Fairly high Charisma as well.
@jrmbayne6 жыл бұрын
One dislike. Must be Bill
@_aullik6 жыл бұрын
nah. bill is happy if lpl can open them.
@woundedtiger12136 жыл бұрын
William Schrimsher lol
@Raven-qj9gv6 жыл бұрын
There are three dislikes now. Bill must have gotten his wife and cat in on it:O😃
@lockpickinglawyer6 жыл бұрын
I doubt it... but I may get shot in the other leg next time I see him!
@keithcallison83016 жыл бұрын
Might be people like me, I like Bills videos better, but it is obvious that LPL has a bit more skill. I'm not sure that all of Bills viewers understand that he has never claimed to be the best. I'm hoping that LPL will need to Ramset at least one lock
@pikaku420694 жыл бұрын
“I used to be a lockpicker like you, then I took a bullet to the knee”
@DanSoldierGuy3 жыл бұрын
The most underrated comment on KZfaq 🤣🤣
@chewinggumsandwich23413 жыл бұрын
Wait we can pick that out stand still!
@dampfhammer29936 жыл бұрын
It's a BKS Serie 31 cylinder. I have 3 of them and they all have these master wafers and 3 spools. Keyway and tolerances are tough. But I love them.
@peak0iler6 жыл бұрын
What purpose do the master wafers serve exactly?
@trevorcarl95155 жыл бұрын
@@peak0iler they create a second shear line for certain pins so that you can have two different keys open it, one key specifically for the lock and one master key for it and any other locks the master key should open.
@0neDoomedSpaceMarine5 жыл бұрын
Do they make padlocks too?
@danandroid87015 жыл бұрын
@@0neDoomedSpaceMarine They do. Only found a German site: www.schloss-profi.com/BKS/BKS-Vorhaengeschloesser-54/
@Anonym-mh7sz4 жыл бұрын
lol, thats exactly the lock that is guarding my flat. It's quite shocking that a standard/avarage german doorlock is in a naughty bucket list. I'd love to see him tackle a BKS Janus or an ABUS Bravus 4000. Those are high security german locks.
@aszi776 жыл бұрын
Euro locks are usually mounted with the round part up, so what you call "top of the keyway" is actually the bottom. I think picking a euro lock with the round part up may be a bit more difficult because the set pins won't fall down from gravity.
@Sailing_Bungaree5 жыл бұрын
aszi88 i also picked this up. Euro is almost always upside down, and much harder in my opinion to pick. The other real life scenarios not taken into account is the door or the door jamb, and a client who has been standing in the cold for an hour waiting for me to arrive! Ive had plenty of locks that I could have picked but had to drill open or choose another door because I haven’t been able to get in the right stance in front of the door. Having said all that, he’s got better picking skills than me any day of the week!
@Wyninka4 жыл бұрын
Wait. American locks are installed the way LPL picks them? And here I was wondering why he was picking them upside down all the time...
@FriedOrange4 жыл бұрын
@@Wyninka Locks are installed with the bitting/pins at the top in Australia, too. Euro profile cylinders aren't common here, based on what I've seen, but even those are mounted the same way.
@kdarkwynde4 жыл бұрын
@@Wyninka not always, but usually. My front door, for instance, has a deadbolt and a locking doorknob. The deadbolt has the pins on top, the knob lock has them on the bottom.
@caniscerulean4 жыл бұрын
@@kdarkwynde From what I understand, having the bitting on top allows the pins to still fall into place by gravity if a spring breaks and gravity keeps most dust and water out of the pins. With the bitting down, the lock may fail immediately if the spring snaps or has other mechanical issues. Down is more likely to be noticed quickly and forces a repair, up is more likely to have a longer duty cycle without requiring repairs to continue functioning. In the case of most doors I've seen where there is one of each, it is usually explained by do-it-yourselfers replacing it either without knowing or caring why it (can) matter. I don't know if there is a higher ratio of DIY in US vs EU, but most homes have the lock installed by the contractor, not a specialty locksmith, so it is more likely just based on general practices.
@TheMilitantMachinist4 жыл бұрын
Back in my early days of manufacturing, I used to build the doors that house these barrel type locks. There's an even more hilarious design flaw to this lock and handle setup. The only thing that really saves the whole setup is that they're usually used in conjunction with a 5 to 7 point roller cam and shoot-bolt door strap. That lock is what we'd call a 60/40.
@TheSupertexx3 жыл бұрын
I am honestly glad to see Bill struggling with a lock with Master wafers. Makes me feel better about myself. Lol
@eeagle692 жыл бұрын
The "this is the lock eating lawyer" gets me every time
@B.Ies_T.Nduhey2 жыл бұрын
Are you pos you got that right...?
@leyrua4 жыл бұрын
"Bill graciously allowed me to select several locks from his naughty bucket" You forgot the part where he shot you in the leg... but at least he let you choose _which_ leg to shoot you in. How gracious of him. 😉
@baseballjustin53 жыл бұрын
And then he shot him I never other leg lol
@Rabbit_Hill2 жыл бұрын
“Was that my left, or your left?”
@Our_Sole_Pusch4 жыл бұрын
If you close your eyes he almost sounds like the worlds scariest dentist.
@QuintarFarenor3 жыл бұрын
*remembering the wisdomtooth I had to get removed and my dentist advising me not to get scared because of all the CRACKING that'll go* *shudders*
@ericr1544 жыл бұрын
4:54 it was at this moment that Bill knew, he would never be the same again.
@jeremiahkennedy16836 жыл бұрын
It's great too see the locksport community working together. Great pickin' LPL
@Jacob380922 жыл бұрын
Just gonna say its nice to see you are human. Usually you walk breeze thru every lock you come across, but I do understand its just defeating a mechanical devise. I really enjoy your content keep it up.
@Talking-Monkey4 жыл бұрын
People need to understand that just because lpl opens a lock it in no way means it was easy. He is very skilled and has a lot of experience from countless hours of intentionally honing his craft and expertise. Bill is great too. Imo it doesn't take away from his skills in any way.
@mr.fister75764 жыл бұрын
Bill was accurate when he said you're very gifted.
@Name-js5uq5 жыл бұрын
My comment is just that you continue to amaze me how nice and methodical The Narrative is that you add to your video It's So explanatory I Can't Take My Eyes away I love how you show us step-by-step what their names and each procedure and the names of your picks that you choose and the reasons why you choose them it's just so so informative I cannot stop watching them thank you again just a loyal viewer that's all
@Widur424 жыл бұрын
This looks like a super standard door lock we use in Germany.
@NoiseCrusader4 жыл бұрын
Same here, pretty standard lock. Greetings from your Dutch neighbor.
@dommeegal37603 жыл бұрын
I actually opnened my door a minute ago with the same lock xD
@ivan_pozdeev_u3 жыл бұрын
You probably confused the lock proper with the euro cylinder outer shape.
@B.Ies_T.Nduhey2 жыл бұрын
@@dommeegal3760 Key or pick?
@B.Ies_T.Nduhey2 жыл бұрын
Does. Is.
@MrSonny61556 жыл бұрын
If Bill hasn't watched the video, it might be worth giving him back the lock to retry picking blind (or semi blind). See if he is able to do it again, and how much trouble it will give him throughout. That way you can probably figure out the reason he was having trouble along with an idea of how tough the lock actually is.
@austinardanowski85454 жыл бұрын
I always remember the other lockpickinglawyer video (i think that it was him) where he discusses picking around the warding of locks like this. I remember in the video where they are describing this lock, he says that the lock ate a bunch of very small picks. I think that he was trying to pick up and around the warding where LPL just went up through the warding. This technique has been extremely helpful for locks that have very extreme bitting.
@travisahling87493 жыл бұрын
The mushroom top pins could have been why he was having trouble possibly. only thing i could put it down to though i havent been doing locksmithing as long as you mate lol.
@jerrydoyle56225 жыл бұрын
wow,up and down the pin stack a couple times like it was nothing!! That's how the best are,they make it look easy. awesome picking!!!
@madrox84 жыл бұрын
with watching this channel for a few weeks i sure learned alot about locks and even started picking myself for the fun of it, i am able to open some reletivly cheap master locks now and able to share knowledge with family members to think twice now about what locks to buy due to how easy some locks really are
@B.Ies_T.Nduhey2 жыл бұрын
When I was young I was able to pick home door w/ some card... Frequenty too, since I tended to forget my keys... Can't any more, it seems, while door's still the same 😭
@CallieMasters50005 жыл бұрын
I think he's really a dentist. He's pretty handy with the tools.
@TS44886 жыл бұрын
Actually it isn't necessary to bend the C-clip that much: Just bend it a bit and pull out the core a few millimetres until the c-clip falls out (also no need to bend the nose in the actuator). Now it is possible to remove the actuator + clutch. The lock is a BKS Serie 31 (Tandem-E keyway), produced from the mid 90s till the early 2000s. The design of this cylinder has remained unchanged (except for the keyway) since the 1960s despite minor changes to the clutch and pins.
@Wingnut3534 жыл бұрын
If it aint broke don't fix it... just improve tolerances :D
@peabody30005 жыл бұрын
when he cut open the key packet i wonder if he thought about saying "nice hiss"
@jimsquared1534 жыл бұрын
Hello fellow Steve fan
@TylerLL21124 жыл бұрын
Man, LPL, BB AvE and Steve would be one hell of a crossover.
@darkmagus4194 жыл бұрын
Nice
@geyotepilkington28924 жыл бұрын
@@TylerLL2112 Prettty cool how theres so much of a crossover between fans of those people.
@TylerLL21124 жыл бұрын
Geyote Pilkington I thought so too!
@fredashay3 жыл бұрын
I've noticed something in common on all these LPL videos: putting tension on the lock before picking it. So here's an idea: design a lock so the face of the cylinder for a few mm deep spins freely so that a lock-picker can't put tension on the cylinder without interfering with access to the pins. And also design the cylinder in sections so that each section of the cylinder spins freely so that even if you put tension on the outer part of the cylinder that the inner part of the cylinder isn't under tension -- that would be very difficult to pick.
@deyensi2 жыл бұрын
Also very impractical to get a key through.
@dennisthechemist44132 жыл бұрын
Hey, I’m not sure if you still care, but the channel “stuff made here” machines a prototype of exactly that, AND lpl has done a review on that prototype
@fredashay2 жыл бұрын
@@dennisthechemist4413 I saw that. I subscribe to SMH. LPL had no problem whatsoever picking SMH's lock, lol. The only lock that LPL can't pick (yet) is the Bowley lock.
@archangelshiro3 жыл бұрын
7:58 Am I the only one that's wildly impressed with the sharpness of the BACKSIDE of that knife tip? I mean, wow.... nice knife, LpL. Lol. Grats on the pick as well. ;)
@JaaMaar0012 жыл бұрын
SKF lock type, precise lock. these come in 3 different types category. Indicated with 1, 2 or 3 stars. Front door pull back protection included on the 3 star locks. They are a pain in the ... We usually drill them out, or force the entire lock.
@sgrape86952 жыл бұрын
1:56 "Click out of 2, another click out of 2, ok 2 feels good" How do you know when to try a 2nd click, and how do you know when "it feels good" ? Thx for your work, it's awesome, I love it, you're the Bob Ross of locks :D
@B.Ies_T.Nduhey2 жыл бұрын
I'd like to know, too, how He knows how many turns of picking a lock will need until picked... He seems to know in advance. I assume I'd just go and go on and miss the opening point entirely...
@joshuahymel97504 жыл бұрын
Do you have a video where you go over the various parts like master wafers, spools, etc?
@harrymanback3475 Жыл бұрын
When i hear him counting down the lock mechanism it always reminds me of going to the dentist 😂
@kennysarkadi42253 жыл бұрын
Wow the ultimate lockpicking smack talk. "Maybe this was NOT a challenge lock, must have been some miscommunication." 😂
@ArkhBaegor3 жыл бұрын
Whew, that's our front door lock, glad to see you had so much trouble with it!
@namelessentity58512 жыл бұрын
That it took you as long as it did tells me that, this is a quality lock worth purchasing.
@shark700070002 жыл бұрын
I just learned of Bill today, when you got those locks. LOL I subscribed to his channel today.
@jurjenbos228 Жыл бұрын
Glad to know that this is my house door lock
@trulyinfamous5 жыл бұрын
Watching you do this reminds me of my dentist. They way you talk so calmly while you quickly click your way to opening the lock is cool.
@MemesnShet3 жыл бұрын
8:03 the way the lights flickered was because the evil got released lol Can't tell if you did this on editong or was a genuine coincidence or practical effect
@SpLiC35 жыл бұрын
Bill's bucket will be empty at this rate.
@msl7585 жыл бұрын
I love how your channel is not clickbait, but i think i'd enjoy the suspense of not knowing if you picked it after reading the title as well.
@eflarsen4 жыл бұрын
LPL only makes videos once he's defeated a lock, so if there's a video of the lock on his channel and him picking it, he's picked it open.
@Randallator9663 жыл бұрын
@@eflarsen not necessarily... There is that padlock/door lock with the u/w shaped key
@ballisticfox90335 жыл бұрын
You know it's going to be a good episode when he puts it in a vice grip.
@MsRandomgaming4 жыл бұрын
Imagine being home alone and all you hear is metal clinking and then..... “nothing on one, nice click outta two” 😂😂
@B.Ies_T.Nduhey2 жыл бұрын
Time to get out the peas😁
@FixxeR1865 жыл бұрын
this certainly shows to me that everyone has their own individual and unique flair, style, subtleties, and finess no matter what 'skill level' they are at. Even when seemingly even matched. One man's naughty bucket lock can be another's Masterlock, and of course, Vis a Verse.
@Nullzeros5 жыл бұрын
This reminds me of welcome to nightvale, probably because of speaking in a calm voice while doing something that seems very difficult.
@tastychunks3 жыл бұрын
'Listeners, I take you to: The weather!' 'Click on one...'
@two_tier_gary_rumain6 жыл бұрын
It's curious that two of the master wafers have holes in their centers and the other two don't.
@TerjeMathisen4 жыл бұрын
My son & I just spent a couple of hours trying to pick a similar BKS lock which my father-in-law had lost the last key for, the main difference from this model was the keyway which was even more zig-zag/bent, i.e. there is no straight line path to any of the pins so we tried to pick them up sideways, from halfway up the keyway, and we found all (most?) of them but we were not able to pick it. This meant that it was time to start drilling it out, and I was not surprised to discover that it was also quite drill resistant. I.e. two broken drill bits so far, less than halfway into the core. :-)
@stevebonds51573 жыл бұрын
This is the standard lock we have where I work. Sometimes we have to drill them when keys are lost. Some will drill in short order and others are a pain in the butt. I would like to see what the other side has and what prevents a key from operating the lock from both sides at once.
@B.Ies_T.Nduhey2 жыл бұрын
The last is in the making. You can have cylinders that can bei accessed and turned from both sides ( unless too short), but they are more expensive. Would've saved me some money, though😢
@uklockpickers6 жыл бұрын
It’s a euro but not the one I’ve sent in 😁 still no luck with our euro ? The one with steel hanging out each side ! That’s to prevent lock pulling .. not snapping by the way, Nicely picked like a pro 😛
@_aullik6 жыл бұрын
what lock have you sent in?
@uklockpickers6 жыл бұрын
aullik oh just a euro cylinder pretty sure LPL with crack it soon😀 🤐👍
@_aullik6 жыл бұрын
uk lockpickers yeah but what euro cylinder XD I was thinking about sending them a wilka cartat p1 but i dont wanna send a duplicate.
@uklockpickers6 жыл бұрын
aullik just a standard GE GE I think from memory was sent in a while ago so not 💯 % on the brand, Doesn’t matter what you send LPL he will open it 😂
@cardiffpicker16 жыл бұрын
UK Lockpickers would like to see him pick it the right way round
@christian81613 жыл бұрын
ur a king man! it's always a pleasure to watch ur videos :))
@JuMixBoox2 жыл бұрын
Seeing the zig zag on the thumbnail made me realise how similar LPL and Vi Hart are. Both experts at things that people wouldn't normally want to hear about with very steady voices but not without jokes either, only showing their hands and their workspace with a seemingly easy setup and extreme dedication.
@TheEmmetdocbrown3 жыл бұрын
This is a standard door lock here in Germany. Meanwhile it is updated with some anti drill mechanism.
@FREESPIRITSSOARING4 жыл бұрын
glad it gave you a hard time, its the one i use for my home.
@donnierobertson30883 жыл бұрын
Great job and video like always
@TheSaint1063 жыл бұрын
I love this channel....I started picking when I was young....locking my moms(school teacher) cabinets that don't have keys....well if u lock them well u have to figure out how to un lock them
@B.Ies_T.Nduhey2 жыл бұрын
If they don't have keys, that oughn't bei difficult
@TheSaint1062 жыл бұрын
@@B.Ies_T.Nduhey not really once u get use to it....used a screwdriver and a paperclip
@stevensavoie856 Жыл бұрын
The muscle memory on this guy. Look at how his middle finger rides higher and higher on the pick when he switches pins. He pulls his middle finger back about the right amount, and then pushes the pick in until his middle finger is against the front of the lock for support. Clearly without even thinking about it.
@AalbertTorsius6 жыл бұрын
Did you pick the other side too? Was there anything unusual in there?
@eve1286 жыл бұрын
Was about to ask that question too. Maybe the tape marked which side not to pick?
@lockpickinglawyer6 жыл бұрын
Same. 👍
@dsb17636 жыл бұрын
That was my concern as well before saying that LPL is doing a number on the Naughty Bucket
@rozboon6 жыл бұрын
I have one of these at the moment, one side is an easy pick and the other has evaded me thus far, just a game of tolerances.
@drl4535 жыл бұрын
So wait each side has different pins!?
@Robert-xp4ii5 жыл бұрын
I guess it was just dumb luck that you were the first lock picking host I found because you’re the best bro! I have watched Bosnianbill too and he’s good as well. You’re just a talented devil. LOL Great job, as always!
@Turidus4 жыл бұрын
I am feeling so much safer right now, BKS are pretty common door locks where I live and my entire multi flat house is fitted with them. If even a "low security" version is that hard to pick, I would guess no burglar is using picks to get in here!
@B.Ies_T.Nduhey2 жыл бұрын
It SEEMS to have been code-carded...
@adirblazkowics77174 жыл бұрын
LPL would probably be the best thief in a D&D session. He'd be the guy identifying and disarming every trap and opening any form of locks that may obstruct the party.
@KoolBreeze4204 жыл бұрын
I just bought a vice-like this one got a remarkable deal on it now I'm waiting for my locks and repining kit from Sparrows so I can start practising.
@MarinusMakesStuff4 жыл бұрын
Yes, these locks are ridiculously good. I have two of them in my practice box and I have not been able to open them thusfar. The ones I have are from 'NEMEF'. Quality is very comparable.
@SantaDragon5 жыл бұрын
I am just a starterin lock picking. But I think it is more difficult to open it in mounting direction with the round part up. Maybe it should be picked in real situation instead in optimized orientations ... then it is even harder. I tried on my door lock in the door.
@MorellioBenoir6 жыл бұрын
Wow you are just working right through these, thanks for another amazing video!
@XB100013 жыл бұрын
It's funny to hear how baffled LPL is.
@shaneabrahamson87322 жыл бұрын
One man's challenge is another man's smirk of satisfaction.
@adamabele7852 жыл бұрын
I´d say it gives quite some resistance. People want maximum security but maybe one day you are alone at home, passed out and the roof is on fire. You want the rescuers still be able to overcome the lock before the morning comes, and you crumble to ashes.
@danielheiss32993 жыл бұрын
Love that harbor freight special vice haha
@kylefreemason5 жыл бұрын
I have noticed LPL uses alot of tension on locks. I always thought doing so bound cores on locks with tight tolerances. I guess this goes to show if light to medium tension fails, resort to bending your tension tools :D Way to go LPL.
@B.Ies_T.Nduhey2 жыл бұрын
I think it goes to show what talent is
@emmepombar33284 жыл бұрын
I also have a BKS lock here, which I never managed to pick thus far. Some time ago I had a bunch of them and all of them were pretty difficult to pick. They make excellent locks.
@AlbertLebel6 жыл бұрын
Fantastic job picking that one LPL. And what a great example of high tolerances on a good lock. Your lock picking skill is something I aspire to.
@therealsilens5 жыл бұрын
Thanks to you LPL I'm eagerly awaiting the arrival of my first lockpick set! I ordered a cutaway lock as well so hopefully I'll learn a thing or two. I've also got some spare old locks lying around that I can't wait to practice on. Thanks again for your fantastic videos!
@leepower27173 жыл бұрын
Its a Euro profile cylinder, there's much quicker ways of defeating it - if you dont mind buying a new lock barrel. I'd doubt a locksmith in the UK would even bother attempting to pick it open for a customer.
@keithsweet88405 жыл бұрын
This guy sounds like a surgeon ,,,precise
@davidjames10633 жыл бұрын
This one took longer than most. I can see why Bill had trouble. Patience, and a good feel are essential. I'd think, "in the field" this lock is pretty much un-pickable. Took our man awhile, even under Perfect conditions.
@MegaJonboy274 жыл бұрын
Totally the Bob Ross of lockpicking!
@domagojmolnar813 Жыл бұрын
I just got my first picks yesterday i ahbe this lock on my front door i was trying to pick it yesterday just for fun now i understand why i couldnt 😂😂
@jedstanaland28973 жыл бұрын
There is a type of captive key lock that i used while in the navy because of the design you couldn't get a bolt cutter to the shackle it looked kinda like an old TV ufo but I loved it. I think the manufacturer was master lock.
@liquidrockaquatics39002 жыл бұрын
He has most of the armory locks on here I think
@brien96485 жыл бұрын
I love how easily you open these locks that "locked" him down...
@ScottWConvid193 жыл бұрын
3:30 LPL: And we've got this open. Bosnian Bill: 😳😱 6:07 LPL: "Maybe this was not a challenge" Bosnian Bill: 🤬🤬🤬 Bosnian Bill remembering that LPL is his business partner: 😁😀😇🤓🥳