Logic Pro #27 - Compressor (Compression Explained)

Рет қаралды 46,698

Күн бұрын

In this video, I demonstrate the following:
1. How to use the Compressor plugin in Logic.
2. What is a compressor, and how is compression used?
3. How to use all parameters of a compressor, including compression ratio, threshold, make-up gain, knee, attack release.
4. How to use compression on various instruments, including drums, bass, acoustic guitars, and vocals.
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | / musictechhelpguy
Support the channel on Patreon | / musictechhelpguy
Demo project used in this video | www.logicproguide.com/downloads
#logicpro #logicprox #tutorial
Timestamps:
0:00 Introduction, What is Compression?
2:08 Vocal Compressor Example
3:26 Gain Reduction
4:42 Circuit Types
9:46 Ratio & Threshold
13:10 In/Out Gain, Make-Up Gain
16:13 Attack & Release Time
20:46 Knee
23:12 Limiter
24:29 Distortion Types
25:31 Mix Blend
27:28 Circuit Types on Kick
29:19 Snare Drum
30:55 Vocals
35:43 Two-Stage Compression Trick
38:31 Bass Guitar
40:21 Acoustic Guitar
41:56 Wrap-Up, Playthrough

Пікірлер: 112

@88-fingers79 Жыл бұрын

Your Logic Pro Series is an absolutely amazing gift to musicians, producers and those of us who dabble along. Thank you!

@mikeg4172 6 ай бұрын

This is the best compressor tutorial I've seen so far. I love how you go through each setting slow and in detail. Also, I love that sample song!

@SeanHaleWoodcraftsandMusic 4 ай бұрын

The more I listen to your original song in the videos, the more it grows on me. I love the lyrics and the story of the toll of addiction

@philipappiah2068 Жыл бұрын

Awesome.. thank you.. now i know the buttons and knobs are not dialing into radio. Following you and is building me up for a better musical future.

@claudiozaniolo4073 4 ай бұрын

Teaching is an art,... I find very few are good teachers,..... I thought you did an excellent job! Thx // claudio switzerland

@vincent_vidal Жыл бұрын

This might be the best step by step tutorial on compression and compressors! Very well done! I’ve always used 3rd party pluggins for compression, never realizing how great Logic’s stock plugins are.

@geducam Жыл бұрын

Best tutorial ever on compression. Probably the most under used and under understood features of Logic for me that I am finally able to understand and explore with substance. Thank you!

@dirk6420 Жыл бұрын

One of the best tutorials I know! Thank you so much!

@tfvcidade 8 ай бұрын

This is the best youtube channel for logic pro and audio mixing tutorial in general. Following these videos for years now and it's always up to date e easy to learn with!! Thank you!!

@victorhakim1250 3 ай бұрын

Dude you explained this so much better than all the other tutorials out there on compressors !

@kpmtwo Жыл бұрын

Best compression explanation I've ever watched. Thank you!

@grahamcooper2144 Жыл бұрын

Really good explanation of a complex concept. Bravo. I'll be rewatching a few of these sections to glue them into my head. As an aside, I play bass and when I record slap bass I've found that relaxing the attack time lets the thumbs and pops sing through. But sometimes too much, so I'll be using the second compressor technique you showed to then reign them back in a bit. Many, many thanks.

@jamesr2934 Жыл бұрын

This is the first time I have understood compression properly. Thank you!

@johnleclerc5711 8 ай бұрын

Hearing and seeing your logic series has been very eye opening. Your explanations are all spot on and easy to understand. Thank you !

@eddaley7911 Жыл бұрын

Best comp explanation I have ever seen, and I have seen many! Thank you....

@ddictive Жыл бұрын

Keep doing what you're doing man:) very knowledgeable. The best explanation about how compressor is work, simple and understandable, very good job!

@fizzle.101 5 ай бұрын

no doubt one of the best tutorials out there, thank you so much

@monkberriedelight3225 Ай бұрын

Brilliant- clear and very helpful

@Moykel Жыл бұрын

Great tutorial, thank you. Clear and well paced.

@rallefreifahrt6630 Жыл бұрын

Your course is a blast! Thank you so much!

@thewhitbyfox Жыл бұрын

Thank you for yet another outstanding video in the series.

@waylonnicholson371 8 ай бұрын

Thank you. Your videos are a breath of fresh air.

@cristinarodriguez3449 20 күн бұрын

This video is soo helpful - you teach really well Thank you for this

@caspianlennox 2 ай бұрын

Fantastic tutorial, thanks so much!

@digitalplace7973 Жыл бұрын

Man... Absolutely excellent tutorial! I really like your presentation style. I learned a lot. Thanks!

@ThePanchomack Жыл бұрын

Great Episode! Thank you so much. Learned so much from your channel, cheers

@vewilli Жыл бұрын

Extremely well explained. Now I know: 1) I will have to listen to it more often 2) I shouldn’t have bought so many 3rd party plugins as the Logic ones would fill all my needs 3) the before and after is often very subtle, sometimes very well heard -> for me it’s still difficult to set the paramters best sounding, as my hearing ability especially in the high frequencies has diminished a lot (can‘t hear them over 8000 Hz any more) 4) Is it true that most of the listeners don‘t hear all these subtle changes -> that means there are thousands of possibilities, everything success depends on the song in general rather the perfect mix?

@cameronpatrickscott Жыл бұрын

I think you make some really good points, i will say there are rather a lot of us music nerds out there these days.

@bassManDavis1953 Жыл бұрын

0MG I have only just had a chance to go through this session and as us cockney's say "cor blimey" what a fantastic piece, you have given me a complete understanding of compression and at last! how to use it properly? At last, I'm so pleased you spent the time to do this tuition, its so appreciated.

@Profartiste Ай бұрын

You're such a good teacher and I like the tone of your voice and all the descriptive details.

@flash2k 9 ай бұрын

I'm really loving this. I've struggled for so long, I get the idea of compression but when I apply it, the sound never comes out as expected. I'm finding this really helpful, thanks

@randyschmuki3173 Ай бұрын

I had to take notes, thank you so much much for the information Josh!

@louisfilliger3734 10 ай бұрын

Super helpful for beginners.

@motovlogbangladesh9596 Жыл бұрын

Thank You! Thank You! Thank You! Never realised compression could be described this good before!! God Bless! Love you Man!

@Purpleboo6875 4 ай бұрын

Awesome AWESOME video!! Thank you so much ❤

@sn0op2k 4 ай бұрын

Best vid on compressors I've seen thank you

@JamesMartin-nx3wv 4 ай бұрын

The absolute best lesson I had on compression thanks so much

@TheBawss90 Жыл бұрын

best logic tutorials I've seen🔥

@nickd.9882 Жыл бұрын

This video is SOOOOO helpful! THANK YOU!

@ecsnsan Жыл бұрын

Brilliant as always. Thanks! ❤

@team.logicpro Жыл бұрын

Phenomenal teaching!

@BrentClay 6 ай бұрын

Concise and clear. Very informative. Straight to the point. I would give this 10 thumbs-up if I could. I like the tune as well. Many thanks!

@petermonrad8215 11 ай бұрын

Just what I was looking for. Thanks.

@karelhoogendoorn Жыл бұрын

This one was very helpful for this beginning musix creator. Thnx!

@manewry66tw Жыл бұрын

Great overview. Thanks.

@derrickjhines6215 Жыл бұрын

Thank you for this. I understand more about compression and how to better use the amazing compressors in Logic because of this video. You are a rock star!!!

@gilles31 8 ай бұрын

Merci beaucoup pour ce partage très instructif et parfaitement clair. 😉

@briancruz1 10 ай бұрын

Awesome video and song 🎉

@Julheartstudio Жыл бұрын

Very helpful, thank you!

@KaranRao9918 Жыл бұрын

Your every video is a breath for new, Decicated & begginers musicians.... Long live Love from india....❤

@vishavjeetsingh1268 10 ай бұрын

Thank you so much for amazing explanation

@gualzofficial 2 ай бұрын

thank you, professor

@rawu-music Жыл бұрын

Very, very good explained.

@cameronpatrickscott Жыл бұрын

Marvellous, thanks for your rigorous delve, its all so pat head rub tummy this mix engineering stuff...

@HishamKhalaf1 Жыл бұрын

Thank you so much for this beneficial tutorial. 🌹🌹🌹

@isrealborn3743 Жыл бұрын

very useful as always!!!!

@lynvconary Жыл бұрын

Your video helped a lot, thank you so much!!! 👍😊

@SufyMusic Жыл бұрын

thankyou very helpful

@ClarkWagaman-pw7to Жыл бұрын

Thanks again! Much appreciated...👍👍

@michaellitton4380 8 ай бұрын

Thank you so much

@Nuclearsoandso Жыл бұрын

You're helping me pass college. Thanks, man.

@darrylhanton3375 Ай бұрын

I really enjoy these lessons , I’ve learned loads , and I’m not using Logic Pro yet , I’m getting an m4 iPad Pro in a couple of weeks so il be putting what I’ve learned to the test, also you are a good speaker, there is a lot on KZfaq , that mumble and suck there teeth etc , thanks for the knowledge

@monkberriedelight3225 Ай бұрын

Thanks Josh

@fxcksthiswrld Жыл бұрын

Thank you!

@jarethhasan7617 9 ай бұрын

Learned a lot

@Parapsyglider Жыл бұрын

Thank you so much ❤

@sheddybhulji8196 Жыл бұрын

Fantastic😊

@peagashraman7292 11 ай бұрын

thank you bro

@vk-music22 Жыл бұрын

helped a lot

@bamdadghaffari 7 ай бұрын

thanks a lot bro 🙏❤

@PavanSibal Жыл бұрын

Good tutorial!, can you please do one on side-chaining.thanks

@graveyarddrums Жыл бұрын

You're my hero

@70nikroxx Жыл бұрын

My God! I think I finally got it , lol thanks for breaking it nice, easy & understandable teach \m/

@45djjasong Жыл бұрын

thanks for this 👊

@Sweetchordz19 Жыл бұрын

Thank you

@clintyoung9902 Жыл бұрын

One thing I discovered when testing Logic’s compressors with sine waves and pink noise is this: - not every distortion option is used in each comp type, but the “soft” option does add the most harmonics (i.e. color), while “clip” adds no harmonics for most comp types - the more gain reduction added (i.e. lowering threshold), the more harmonics are increased - similarly, the more make up gain added, the more harmonics are increased. This is where negative output is really useful - knee also effects the levels and content more than I previously thought - finally, the cleanest to the most colorful are Plat Digital, Classic VCA, Vintage Opto (which adds most of it’s color near the source freq), Studio VCA, Studio FET, Vintage FET, Vintage VCA

@anjalikhushlani1234 25 күн бұрын

gr8 video👍

@didcomusic Жыл бұрын

Yes. Logic Pro compressors are really good features. Honestly, usually no need more when we fully use the possibilities of exiting one !

@bobkanza_ 3 ай бұрын

Amazing 🎉

@stevenmoreno4099 2 ай бұрын

Thanks so much Josh for these series, I’m planning to buy the course once I finish it, where can I so that?

@Betazeno 4 ай бұрын

Wonderful explanation ! I was using it all wrong.

@isrealporter5654 Жыл бұрын

im so happy i found you🤕

@wesleysstudios8741 Жыл бұрын

Thank you very much... very useful to me, am practicing on logic. Appreciated 🤝💐

@peterpejanovic2652 Жыл бұрын

Nice Nice Nice!!! Thänx a lot!

@waltonbrown Жыл бұрын

Finally… someone who can explain Logic in plain English, thank you.

@joseluis-wd3zd 11 ай бұрын

Briliant video about compression, could you make a video about sidechain kick and bass?, also the button compare was on, what for? could you explain what the button compare is doing? thanks a lot.

@franbert6218 Жыл бұрын

Really exceptional tutorials. I have used logic for a year now. I only now decided to watch every single tutorial from the start and always find some hidden gems in them. Thanks. One question: most people recommend using the FET first on vocals and then the optical compressor. Why do you do the opposite?

@MusicTechHelpGuy Жыл бұрын

The whole reason why I use the FET compressor after the OPTO is to make up for the fact that optical compressors often leave a quick transient at the beginning of phrases due to their slow attack times. With the Logic compressor, you have a lot more control over attack time than say on an LA2A hardware unit or plugin, so you could probably get away with using FET first for that. But the FET compressor in my mixes is purely to catch the extra transients and peaks that the OPTO misses.

@Pablo1a1 10 ай бұрын

blessed

@trackdayguy Жыл бұрын

Excellent overview on a confusing topic! As an alternate technique, could I use the built-in limiter to tamp down the peaks, rather than running a 2nd compressor, as in your example? Just curious to see other ways that limiter circuit could be used.

@MusicTechHelpGuy Жыл бұрын

You could, but using a limiter is limits the dynamic ranges of the peak reduction, so all peaks will be limited at the same threshold, with 100:1 ratio. I think in most situations the 2nd compressor would work better. In the past I've used the limiter in the compressor to intentionally clip/saturate some drum recordings.

@JorisPtrs 11 ай бұрын

i have a question. I produce housemusic. My mixes usually are 80% ok compared with similar tracks on e.g. traxsource etc. I still dont understand how to make the instruments more sounding 'in the face'. Is that mainly obtained in the mastering stage? Or are there other reasons?

@lzandman 11 ай бұрын

Love your series and this episode in particular. Though the bass guitar in the bass guitar chapter has way too much sub boomy sound for my taste. I like more defintion in my bass guitar tones.

@BillyBoi911 Жыл бұрын

Sorry if I missed you talking about this; But in the sidechain section, what are the differences between Max & Sum?

@MusicTechHelpGuy Жыл бұрын

I'm saving the Compressor Sidechain stuff for a much later video. The MAX and SUM modes affect how and when the signal is compressed, when using stereo sources. So if you have a stereo track and you're using MAX mode, if either of the channels exceed the threshold, the signal can be compressed. If you operate in SUM mode, the combined level of both channels must exceed the threshold for compression to take place. This is also affects the release, because in MAX mode, only one channel has to fall below the threshold, whereas, in SUM mode, the combined signal has to fall below the threshold for the compressor to "let go". Hope that helps! We'll come back to these and do a full deep dive on side chain settings, and side chain input sources later on down the road.

@BillyBoi911 Жыл бұрын

@@MusicTechHelpGuy very helpful. Thanks!

@LennardHarders Жыл бұрын

I am a newbie when it comes to compression. Thank you for this video. I have a question: at 21:38 you said a hard knee would result in more compression to the signals around the threshold. But when I look at the graph it seems to me to be the other way around. That a soft knee would cause more compression overall. The dark area decreases when you turn down the knee. Which means more compression, right? I just wanna be sure I understand those graphs.

@MusicTechHelpGuy Жыл бұрын

Let me explain in a different way. With a soft knee, the amount of compression applied to signal slightly above or slightly below the threshold is more variable, because the "breakpoint" in the graph is rounded, as opposed to a hard knee, where it's a hard break determined by the threshold and ratio. So with a hard knee, signals that are slightly above the threshold and signals WAY above the threshold will be compressed by the same factor (ratio). Signals slightly below the threshold will be left alone with a hard knee. With a soft knee there's a bit of variability around the knee, so signals slightly above the threshold will be compressed less than signals way above the threshold. However, I see your point, that because of the variability around a soft knee, this also allows signals slightly below the threshold to also be compressed a bit, which doesn't happen with a hard knee.

@LennardHarders Жыл бұрын

@@MusicTechHelpGuy Thank you for the clarification :)

@pianomaniac14 Жыл бұрын

Hi Josh, I’m composer, and classically trained pianist, producer and engineer. I have acted as engineer and producer for a classically trained pianist who is very much a purist and who doesn’t understand much about the process of recording and production. He wants everything to sound very natural, which I totally understand but he believes that “natural” simply means a good microphone and no post-processing at all. I have a hard time explaining the principles of why, even for a natural sounding recording, even for a classical recording in a way he’d understand as a musician. He seems to disregard the science and he likes to say, “We just use our ears and go by what we hear during initial sound check. Compression is a particularly difficult thing to explain to him. Have you ever had any of these struggles too? Could you perhaps do a video with some tips about how we could work with other musicians who are wary of the recording and production process? I love your videos! Thanks!

@espedale Жыл бұрын

Analogies usually work in these situations. Show him an unprocessed raw image from your camera. Ask him if it represents what he is seeing in real life. Of course it doesn’t! The colors are muted, there is very little contrast, and the exposure looks different; yet it is the purest UNPROCESSED capture of the image. To represent what we see in real life, some adjustments need to be made (saturation, contrast, exposure, etc.) until the image reflects what you see in real life; being careful to make subtle changes and not go overboard. The same is true of music production. The tools we use to capture sound are fantastic, but we need additional tools (aka processing) to arrive at the closest approximation of what we experience in a live performance.

@pianomaniac14 Жыл бұрын

@@espedale @musictechhelpguy Thanks for this! What kind of analogy would you use to explain that unlike composition or performance, you can’t just go with what your ears tell you during sound check and mic setup? I have a hard time explaining that just because something sounds good before recording doesn’t mean that your ears tell you everything. He keeps saying, “Music is an art. We just need to use our ears. If our ears are saying something is good when we set up mics, we don’t need any mastering or post production.”

@MusicTechHelpGuy Жыл бұрын

Similar to what another commenter said, the microphones do not capture a 100% realistic interpretation of what we hear in real life. With 1 microphone, you only get 1 perspective, from one position in the acoustic space. 2 mics, two perspectives, or a stereo field. But even stereo sound is 2D. What we hear in real life is 3D. We often have to enhance 2D records to make them better approximations of what we hear in real life. In concert music, they definitely like their dynamics, but sometimes I find the dynamic range of concert recordings a bit too dynamic in the recordings. (I used to do nothing but live concert recordings for 2 years as my job). I like to put a little bit of compression, just a touch to round out any "sharp corners" and if anything is missing detail, I might add a little top end, but not much.

@pianomaniac14 Жыл бұрын

@@MusicTechHelpGuy I just thought of a great analogy. If you play piano for a large audience and you play a pianissimo passage in a way that sounds perfectly delicate and soft to your ears, you won’t project to everyone in the hall. You have to listen bearing in mind that your sound needs to reach an audience, so you play in a way that might sound like mp to you but will sound like pp to the audience. The same is true in recording. Something might sound great to you before you add anything or before you master, but you need to keep in mind that if you don’t add any post production processing, it might be un-listenable to your audience depending on what they are using (and we never know that). Am I making sense?

@Danthatsgoodmusic Жыл бұрын

I'm really struggling with this one, the others such as EQ or Reverb aren't as hard for me to grasp.

@aramkiam Жыл бұрын

Imagine you're sitting in front of your TV watching some show. Now commercials start, it is louder so you use your remote to lower the volume. After the commercial it's too quiet, so you make it louder. In that scenario you are the compressor.

@kboogie2323 Жыл бұрын

👀

@mamaburra69 2 ай бұрын

I will have this cheesy ass song stuck in my head all my life, I just know it. Thanks for the lessons! You're the best.

@aramkiam Жыл бұрын

I once clicked on the 0 db button under Auto Gain. Scared the hell out of me.

@vycashh Жыл бұрын

16:02 dejar el auto ganancia en 0dbs es la única forma de ganar RMS ya que las otras dos opciones (off y -12) no hace más que mantener el volumen y la dinámica. Los compresores de Logic estan rotos!