In Brazil we wear boots, gloves and glasses for our safety

​@@fabiopimentel9573are you from Brazil?

@@fabiopimentel9573 Sou do Brasil, sabe me falar qual curso posso aprender a restaurar compressores de geladeira e ar condicionado?

The machines he's working with and on with are a symbol of our betrayal. Why would we want to work anymore.

The politicians are among the most crooked though.

hard honest mesothelioma

I think people everywhere do what they need to. I'm sure if they didn't need to do this, they wouldn't.

@@rudyruiz9521 they dont need to poop in the water they drink... but here we are.

Moving out of caves and getting with the times is not 'spoiled'.... it's just a case of evolving. Having little education, living in a corrupt shit hole, following stone age bullshit religions are all a recipe to be a total nothing!

What was done to this compressor was a waste of time. If you were doing this you were doing pointless work. To check a hermetic compressor you just check suction and discharge, drain the oil, heat it up to get out any moisture and put new oil.

Cutting it open and doing nothing more than looking at the windings and lapping the discharge connection is stupid. A megger can check the windings

THEY LAST FOR MANY YEARS.!

@@sammyd7857 Shut up. They have many years experience . Much more than you

That pisses me off!

It probably said, made in Great Britain on it 🤣

It gets me too. Just turn off the next video suggestions in settings. 🤷🏻‍♂️

that's really your only concern with this video?

Как решается в общем этот ремонт?Замена обмоток?Или они их сами перематывают?

Пакистанцам спиртом вера не позволяет мыть!)

@@dvvvideo Ни кто там ни чего не перематывает это галимый контрофакт.

инверторные есть смысл ремонтировать простые неактуально

@@Hatori88100 видно этикетка панасоник , тот же абибас))

Not so much "How to", more like "How it's done"

Does she now give you the cold shoulder...

Ask google about Einstein's fridge.....thats not amazing,just 'patent'ly efficient. (Boy scouts build these all the time.Just add water.No batteries included.)

@@boogieknee3781 not very efficient, that's a lie, just more reliable from having no moving parts. They're still used in RVs and specialized applications.

I have one 1954 year, called Dnepr, works ok 110v.

Made in Ussr

Also earprotection, gloves, dustmasks ffp3

The rapture will happen without a doubt. The rapture will happen much sooner than many believe (much less than 10 years according to all the environmental, weather signs , israel timelines, astronomical etc showings: luke 21:11 . It will happen without any warning , not one , in an instant , catching masses of people off guard just like God always does, ie the flood , sodom and gomorrah ~ a rude awakening . Matt. 24:44 jesus said Therefore be ye also ready: for in such an hour as ye think not the Son of man cometh. luke 12:40 Be ye therefore ready also: for the Son of man cometh at an hour when ye think not. No one knows the exact day or hour the rapture will happen is a certainty . THE RAPTURE CAN HAPPEN NOW at ANY TIME make no mistake !! . Please awake to Christ Jesus which is the ONLY hope NOW and dont let yourself find out it IS all true later when its too late and you have been left behind in the most terrible times the earth Has Ever experienced Before and ever will...for anyone who sees this and doesnt know what to do please If you havent given your life and heart to Christ Jesus you will have REAL BIG problems way bigger than any problems you have Ever had If you are left here on earth after the Rapture . After the Rapture The USA , Worldwide , will face More evils , Inner city chaos, firearm wars etc etc ,power and water , food shortages , military invasions,mass executions (yes much blood will be required by antichrist ) etctec than it Has EVER been seen Before and you surely dont want to be Here then . We Have Time NOW to change , please seek Christ Jesus while there is still time to save ! no one knows the day or hour of the rapture ,But the rapture will start out just like any other day .....The Rapture will Take Place In the day In Broad daylight, sunny day , In an Instant FLASH without ANY warning , and there will be peoples Driver Ids, cell phones ,wallets found in various parking lots , Purses bill folds Found at work etc etc with NO explanation , and People VANISHING so No One can refute it has taken place. . romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation. rapture ready . com Many of those that are left behind were seen in deep regret and many hung themselves on fences on interstates , and roadways and different places, their cars left by the roadside and many others also used their cars to kill them selves wrecking into things . It will be a horrible time , and regret will cause many to commit suicide . NOW is the time, dont wait until its too late seek Please Christ Jesus NOW. Those not going in the rapture and left behind , who rejected Christ Jesus' Love, and those that are practicing sin will have a big nightmare when left after the rapture example woman dancing in topless bar practicing sin , will NOT go in the rapture when it happens abruptly , and many other examples of willfully practicing sin daily .matthew 25 :1-13 parable of the 10 virgins, 5 were wise 5 were foolish and payed a severe price . Acts 3:19 all unrepented sins19 Repent ye therefore, and be converted, that your sins may be blotted out, when the times of refreshing shall come from the presence of the Lord. romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation. Please seek Christ Jesus NOW with your heart, please repent change while theres still time left .

@@kingdommusic5456 Is this AOC?

This about labor cost. They probably get 10US per day. For them is cheaper to fix rather to buy a new compressor.

@@climaland навязанной димократией по американски.Достали пол мира!

Yup 👍 Thanks for watching ❤️

Ага, и весили они как пол холодоса под 20 кг)))

There's no labour like child labour.

@@rinkinkel ... Your comment is baseless. This young man is somewhere around 14 to 15 and is in a apprenticeship just as an apprentice would be in a westeren country. From the looks of the work place and his work his employer will be more than happy to offer him a full time job one day. If he doesn't he would have to be an idiot. We can only hope that in western countries young people finally learn to get up off their asses and learn a decent profession again. Simply because sliding from one chair to another in a university, to then be unemployed when they are finished is not a solution. No one needs shit loads of empty headed big mouths that have no idea what it means to put in a honest days work. Not all of them of course, but too many because the system has been screwed up over the last 40 years. BTW for those that have no inkling about how the real world functions at some point (usually the last year of learning a trade) one is expected to participate in the production to prove that one has absorbed what is necessary to fullfill ones place in society. That's called logic, but we have people forming politics these days that lack it up to 80% in their own heads IMO.

@@robertthomas6127 Send your son there, why don't you.

Thanks for watching

Thanks for watching

mémé au Maroc la mémé choses

you actually trash them and replace them with one that this guy refurbished....

That’s the one you trashed it is now going in a new fridge

Consumerism

Σα έρχονται ππ

Thanks 😊 Keep watching our videos..

@@logiccreations9176 Ok

Thanks for watching

Thanks for watching

)))))))))

come on! this is not Panasonic manufacturing plant. These guys have made their own sticker of Panasonic to impress or fool people. Who knows which compressor was it.

@@MrTalhakamran2006 Hence, the quotes around “Panasonic”.

😂

Hu

J nự

As while as it works Yes.. LoL

Our compressor is making loud noise like a bike starting noise. But the cooling function is completely okay. The repairers are telling us to change it. Are they lying or telling the truth?

@@takini4918 Compressors are not serviceable on the field. Infact, compressors are not serviceable at all. So the best thing to do would be to replace it, unless the system has been overcharged, has excessive lub oil in it or there is a presence of water in the system. Maybe you could clean the lines, vacuum it, and fill with fresh and correct quantity of oil and refrigerant. If the noise still persists, it's time to change the compressor.

@@SubramaniamLakshminarayanan Compressor is quite expensive. Our fridge is more than 10 years old now...its the third time we had to call repairer. Can you please suggest me the best option? Should I replace the whole fridge or changing the compressor would be the affordable option?

Thanks 😊 Keep watching our videos

@@logiccreations9176 of course⭐⭐⭐⭐⭐

Sorry, you don't have the skills needed. There's a mcDonalds at the corner tho.

sarcasm?shirley knot🐱

all the junk compressors in the basement ?

طيب انا عندى ١٠٠٠ماطور

They are doing the best they can with what they have I suppose, but do steel toe boots not exist in India/Pakistan?

И не удивился, что они слили все масло из него и не налили нового?)

@@user-jr9vp8dq8k Меня удивляет Ваша уверенность в том, что они не залили масло.))

c каких это пор компрессор бытового холодильника стал считаться сложной техникой? Но всё равно молодцы.

@@mkbsnab6773 Ну и не до такой степени простая, что б в любой слесарке починили.. Я разобрал как то ради интереса, нормальное такое количество запчастей получилось))

Он и не производится.

Pakistan👍 🇵🇰❤️👌 not India 👎

Kkkkkkkkkkķkkkkkķm

Как ты думаешь куда продают эти залипухи? Завтра сгорит компрессор купишь такой взамен пакистаносоник, повезет месяц отработает и клина словит!

техника безопасности зашкаливает при работе с болгаркой

@@Hatori88100 на внутренний рынок, полагаю.

@@Hatori88100 Да чтобы клин убрать, не нужно ничего резать!

@@user-ib2hl9ci7k капиталка по регламенту компрессора холодильника))))

Чего только не было в 90х . И Panascanic и Panasoanic и даже Abibas...

Thanks for watching

Jajaja jajaja

только когда холодильник ломается через год и гарантия кончилась ,хозяину не весело

И наклейка в конце Панасоник))) Я просто валяюсь)))

оттуда же и абибасы по всему миру расходятся))

The complacent disregard for a simple guard on the cutting disk made me SMASH the dislike button. The lack of gloves when dealing with a component that he KNOWS has been SATURATED with toxins,not ONCE does he wipe his hands. The fluid he poured out,will undoubtedly be flushed downsteam,significantly affecting anyone in the now contaminated foodchain. Water treatment aint happenin' there,so good luck eating the local produce. This is precisely why I get bloody angry when they ship 'recycling waste' abroad "because its cheaper". This video highlights the real reason WHY we should do it ourselves,locally.

Guard will not always save you, AFAIK there arent deadly chemicals in a compressor.

@@iwantitpaintedblack A seat belt won't always save you in a car accident either.But like a guard it should always be used. Its absence is indicative of complacency concerning safety procedures,such as the SAFE removal of the gases they have been in contact with. EACH compressor has been in contact with toxic refrigerant for at least a decade. This one worker is repairing several per day,thus increasing his exposure. The heavy metals he is grinding from the compressor are being converted into dust which he is inhaling throughout his working day.... (...these metals will enter his lungs,lead,solder,carbide,iron,aluminium,mercury).....since they will enter the bloodstream DIRECTLY they will cross the blood brain barrier before they ever reach his kidneys...... VENTILATION,and AIR FILTERS are needed but for this poor sod...it is already too late. ....the same dust is all over him after he leaves work and goes home. google.... industrial disease/steelworkers.... ...also....when he goes home to his family......even if he showers he is still contaminated with all that dust,its embedded in his skin pores, if he picks up his toddler,that child will suffer poor health.Ask any uk.coalmining family for confirmation of the HARM DONE TO THEIR CHILDREN FROM THIS CONTAMINATION. Education is a wonderful thing to continue AFTER your lessons are over. Who knows WHY your teachers never took the time to teach you these basic facts. Google the effect on the longterm health on METALWORKERS,MINERS,of the toxins they inhale.

PARTICULATE matter,risk factor is not merely inhalation,it is immolation**,nice comment,even I missed the U.V.factor...well spotted. **Myself I am wondering when he will be dumb enough to grind something made of just aluminium,following that procedure. As THAT will be all over the news when he does. (mysterious explosion,darwin award,and a local cartographical update*) *Redrawing the local maps due to exposion/firestorm. Look up the ....sony factory explosion....(aluminium paint aerosolised and lack of ventilation in the factory.....and somebody sparked)same thing happens with a bakery silo,there is also the infamous wood flour explosion in the uk++ ++google the news reports and the hse report of the events leading up to.......bosley explosion court case.

@off spec if you knew it wasnt new would you pay new price for it because it looks new?

@off spec you didnt see him open an old used compressor? then replace a couple of bits with other bits made from who knows what? then put it back together? and you think that makes it new? tell me would you buy a new car and when discovering it was 2 years old with new paint and tires that would be new?

@off spec your car engine would not be considered new but refurbished. when reconditioning old engines only parts requiring replacing are replaced. you could have an oil pump that was considered ok so re-used but that oil pump could well stuff up after a few miles or a hundred miles. same goes for many other parts, it will not be a 'new' engine. even if every part besides the block heads and rods crankshaft cam shafts headers inlet manifolds were replaced its still not new!

i have worked in the reconditioning engine business. its done to keep costs to a minimum. stories of 'new reconditioned' engines blowing up are every where. the only was to get a new engine is to get one from a place like ford or chev. new still in the crate mate

@off spec if i was rebuilding an engine for me, yes it would last many years because i would replace everything possible with new. but if your buying 'off the shelf' you get minimum replaced. and if you dont see it being built then until it goes boom you dont know what has been done inside.

Thank you very much!

Es muy muy bueno reparar..y en México. Antes se reparaban los compresores. Y los motores en general..ahora ya nos invadieron los productos chinos...con bobina de aluminio....

Buena idea, pero faltó probar el compresor con gas refrigerante porque lo que aqui muestran no es ninguna garantía de buen funcionamiento. Un compresor probado al vacío comprimiendo aire no prueba nada

Esto no és una reparación , solo una limpieza al interior del compresor !

Cierto eso es cuando de alguna manera amas tu trabajo y te divierte lo que haces pues todo lo hacen bien con calma y sin pasar nada por alto

@@xocoyotzin9917 cierto pero el ptoblema no es eso el mayor problema es que antes los tecnicos en refrigeracion tenia conocimiento en rebobinar y todo lo hacia el misno tecnico pero hoy dia todo lo quieren comprar e instalar y ya a cobrar y la verdad es un trabajo que lleva su tiempo por ejemplo hoy se daña una nevera y sale dañado el compresor nadie lo repara pues no saben rebobinar y optan por reemplazarlo por uno nuevo y el cliente ya no puede costear mejor desechan el aparato

its pakistan 🇵🇰🇵🇰🇵🇰💖💖💖💖

So many violations of OSHA i cant even begin. Just simple PPE would be a good start. Environment is a little sketchy.

Pienso que lo ponen para saber la capacidad del compresor y tipo de refrigerante con el que trabaja.

Es evidente que se ve la soldadura y repintado del compresor y la etiqueta se la ponen para identificar marca y características del mismo

کاملا صحیح میفرمایی.من ایرانیم خوشبختم.پاکستان کشوری پرجمعیت و فقیر است ومجبور هستند تمام کارهایشان را با اندک ابزار خودشان پیش ببرند.عجب دنیای شده دنیای مجازی.با همه زبانه در ارتباطیم خوشحالم ادوین سانچز.شما از کدام کشورید فکر کنم برزیل باشید

Ну да, я бы тигом варил, или полуавтоматом в тазике с водой на худой конец)

Thanks for watching

Износ вала и поршневого пальца???

Это компрессор соответственно там как в любом компрессоре есть клапана впуск выпуск. Макометром проверял какое давление качет и держат ли клапана.

Он свечку поменял искры не было.😁 Компрессия есть искры нет.

@@DEMON23027 какая искра?там форсунка,от сжатия работает🙂

@@user-ph1ep7ng2v да не свеча там стоит иридиевая, форсунка на Самсунг ставиться а тут Панасоник.

Thanks for watching 😍

Don't know much about HVAC, but this sounds logical & is food for thought.

I installed a used 4 hp condensing unit that a customer had .... started it up and sounded bad but ran for 2 years then locked up end up cutting open compressor had almost no oil and oil looked like mud i was amazed last that long.

Ну да, прилип ротор, частое явление, особенно где статор к компрессорной части двумя винтами прикручен!

en esos paises la pobreza los obliga y aparte de eso la cultura de ellos se inclina mas por el reciclaje que por productos nuevos

czink czank czonk chińczyk majtki ściąg

No guarantee only warranty sir for 10years