AXC-Sim Load Cell: bit.ly/3C1qgkq More affordable Option: geni.us/U7KgAR

Thank you very much for this video! I am going to install the TrueBrake this weekend, along with the potentiometr upgrades also by AXC-SIM.

I don't even have a wheel and this was enjoyable to watch.

I have a G923 with this (with 60% main spring), and it's a game changing difference. I couldn't imagine going back to the original brake pedal. Even though the pedal travel is minimal you can easily judge brake power by the amount of pressure you're applying and modulate it...making trail braking so much easier.

Glad I came across this, just ordered this along with the potentiometers. Thanks for sharing!!!

Thanks man thus vid really helped. My pedals where sticking on so I cleaned em out, put it back together and it turns out the pedal sensors are broken. Great vid man 😂

10:55 LOVE THE JUMP CUT ON THE PDEALS LOL

Pro Tips : This Pedals Trap, are exactly the same from the very first racing wheel from logitech the G25 (that i still have). And those potentiometers (or position sensors as you called it) need a bit of conductive lubricant regularly and most important things to do is either block that window they have in the metal housing or mount your Pedals Trap Upside down to avoid gathering dust, hair, crap and sort.. Just sayin' ! cheers !

Highly recommend swapping the original brake spring into the clutch and the clutch spring into the accellerator. After you stiffen the brake so much they feel week otherwise

I think you made a mistake when you put all the assembly in the plastic cap...i dont think it got aligned with the 3 gaps in the bottom therefore you had less pedal travel at initial pressing.

seeing the pedals open like that makes me want to just build a stronger, better mount and housing

I hate that I will have to do this because I am not good with technical problems like this. I did an unboxing and testing of the G923 wheel this week and the brake is ridiculously stiff. The clamp on the wheel also got stuck, and I have to watch another video on how to fix it. This is my first racing wheel since Nintendo 64. I was going to get the Thrustmaster 300 rs gt, but they are sold out everywhere.

You need to take out the white piece that's up in the black half.

Is there a softer progressive Spring for the g923 Brake? The original Spring is just to hard and bend my Rig if i need to brake 100% What Force does the original Spring have? Mybe i find a softer by myself.

After recently Installing a brake pedal mod, my throttle and brake are stuck at 100% in game. Do you have any idea how to resolve this issue?

Hi i would like to ask if you also have the mod on the accelerator?

Muchas gracias por el vídeo y un fuerte abrazo y force feedback y honor 🤗🦾✊.

My ‘standard’ brake keeps sticking on. All my wires look fine and I’m hoping buying this upgrade will solve my problem.

You put the throttle pedal face on upside down. Besides that it seems like an awesome mod

tbh... that new brake looks way to hard now.. Even the Fanatec brakes go way more down.

Will this work on a g923?

Thx💪what game is this ?

I just broke the little connector for the white one. Sick

Hello .. your video was great and you sound knowledgeable..I just have a question I can't seem to get the answer for , I have the G923 and I am looking for an Ebrake that will connect to my wheel and xbox series x .. hopefully you can help me out. thank you for your time

So I installed my pedal, paid £60 or so. Got the 60% spring, but to be honest I would recommend a stiffer spring as it's a little weak if I'm honest. The point is that the load sensor is not picking up much input until you reach the stopper, so whereas I thought the 60% spring (ok, 3/4 but still) would still have some resistance, it was really softer than I expected - I would rather a stiffer one to have more feel in the sense of lifting off the pedal when trailing, but of course that might just be me. Overall I have to say I'm a little disappointed, counter to most of the reviews on here. I wish I'd saved the money for CSL pedal set and at some point DD upgrade (when anything is in stock of course!). Maybe I'll change my mind, I've been using it for a week now. I would recommend maybe the 80% spring if this review resonates with you somehow!

When you first see you use the pedals with your red trainers . the camera view for a moment it look liked you had huge feet lol .what game is it your playing.

This mod doesn't use load cell, it uses a linear potentiometer to approximate a load cell pedal. So it doesn't respond to pressure, it still responds to travel like a regular potentiometer.

Very nice, but I wouldn't leave the wires without tape, because if the terminals touch the metal part of the pedal it could damage the component. It's an unnecessary risk.

I just changed the springs of the brake and the clutch on my G923, since I don't use the clutch. The brake ist much easier to use now, at least for me and I didn't have to buy new springs or any other product.

you´ve mounted it wrong, you sould remove the plastic piece to instal de top item, anyway, what main spring did you choose, and consider nowadays? I asked one! ;) ty for the vid

Do you know what spring is in the main unit? A - 38kg (100%) Hardest B - 30kg (80%) C - 23kg (60%) D - 15kg (40%) Softest

biggest shoes i have ever seen.

I am now just realizing I can remove the whole pedal housing and mount the pedals by themselves to the rig. I'm 100% doing this when I get home. Custom pedal placements incoming.

is it possible to get rid of those super sucky potentiometers in there?

😍🤩😍🤩😍🤩

Awesome alternative but not a true Load Cell. Just a potentiometer that is slightly mimicking the proper load cell's mechanism.

Anyone attempting this, plug out unit connection from wheel base #1, #2 cut rubber piece in half, you need a bit of a squish, and goodluck take your time and have good lighting when attempting.

will this work on a 923?

Your gas pedal is upside down, your welcome. Lol 😆

have you tried these on the gas pedal and the clutch pedal!!??

i just realized your Subaru STI is the same color as mine

To bad this mode is almost the cost of g293 is after shipping etc

I think the gas pedal is too light

923 break is already improoved by LG

Just letting you guys now you can also just change the brake calibration too if you maybe don't want to do this video shows how, thiskzfaq.info/get/bejne/g61jg5pns86lqJ8.html

Pretty sure it's called a potentiometer not a position sensor... Also you installed it incorrectly.

В жигу себе поставлю

load cell.... to play forza horizon.. im cracking up

WARNING GUYS: I Just opened my G923 and there is no rubber, just a very hard spring!!

I have a brand new g920 and there's absolutely nothing wrong with the brake pedal I play ATS/ETS2 adjust the brake in the logitech hub software simples the saying goes if it ain't broke don't fix it

u could just remove the rubber from the brake pedel and put it all back together and itll be 10x better and its compeltely free lol

I will just throw away this black rubber.With this mod the pedal is even harder and you have even less feeling for trail braking.