Those gas jugs were incredible.. may have to consider those for my wing.
@MRMRS2wheeler3 жыл бұрын
Yeah, they are super useful.
@jerrycrafton93885 жыл бұрын
This is a great video, thanks Mike. I have a couple of these and now more on my list. I appreciate the time you put into these videos and I look forward to the next one. Take care and Happy Easter.
@MRMRS2wheeler5 жыл бұрын
jerry crafton Happy Easter buddy. I'm glad you were able to get something from this. It makes the effort worthwhile.
@The_Touring_Jedi4 жыл бұрын
ST1300 with cruise control is a great bike. I had oportunity to drive one. Only what lacks with ST1300 is a stability of ST1100. ST1100 is the most stabile motorcycle at high speed in compare to others Touring models.
@MRMRS2wheeler4 жыл бұрын
I know some have had issues with stability at high speeds. I personally have not experienced anything in triple digits. To me, with a few modifications, it is the perfect touring machine. Thanks for the comment.
@1212sman4 жыл бұрын
I tour on a ZX14 and by far the best mod I made was mounting the LSL/Speigler tubular handlebar conversion kit. I had tried just risers for the stock clip-ons and they were ok, but it just doesn't touch the conversion kit in terms of comfort and utility. See, "Pops" here just can't fold up on a sporting bike the way he used to, especially for 500+ mile days. This mod mounts 2" bend superbike handlebars up another inch-and-a-half and moves them toward the rider about 2". This results in the rider sitting up straighter and taking a lot of weight off the wrists and un-cricking the neck from having to look up all the time. Law of unexpected consequences: I can see around me much better now because I'm sitting up straight and my neck is not at an uncomfortable angle, resulting in far less tunnel vision. One downside is that it causes a subtle shift in weight towards the rear of the bike because of rider position. This made the front end feel somewhat vague when cornering until I lowered the front ride height about a half inch. All in all, the best money I've spent on this bike.
@MRMRS2wheeler4 жыл бұрын
Sounds similar to the helibars. I added risers on my cbr 600 and I agree, it makes a huge difference. But it didn’t bring the bars closer just higher. Sounds like a great mod. People are so afraid to mess with the ergonomic of the bike but fail to realize that the bike is not custom built for their comfort. You have to make mods. Ride safe brother.
@allanb52 Жыл бұрын
Not too many people travel with their "better half" I do, always and it's really great, I like to see it too, it brings couples closer. We are at the other end of the cc scale, with a Vespa GTS in Europe and a 350 Royal Enfield Meteor in Asia, both great bikes, but we travel much lighter. Not sure I would like to do those long highways in the States, preferring the mountain twisties of Portugal and Thailand. Enjoy your riding.
@MRMRS2wheeler Жыл бұрын
Thanks my friend. You are right, it does bring us closer and it's more enjoyable. Hey a bike is a bike, but yeah, I don't think it would be ideal (but doable) for the long streches of highways we have here. We just completed a tour of the entire North Ease, from Florida up to Maine. 16 days. It was awesome. Lots of highway riding, but also some mountain twisties in VT, PA, and upstate NY. We hope to make out to Porugal & Thailand one day. Stay safe & thanks for watching.
@charlesp95973 жыл бұрын
Great idea on the fuel bottles! I have the same plastic container in my garage, didn't even know the fuel bottle fit in it. Go figure. I might do the tour pack power tip to charge my helmet. Throttle rocker great tip! Thanks! I'll give you a great tip right back, Harley seat circulator pad for hot weather.
@MRMRS2wheeler3 жыл бұрын
Glad you got something from the video. Thanks for the tip on the seat cushion. I would have to try that in the summer. Ride safe brother.
@RetiredtoRideSpain5 ай бұрын
Thanks for the information, we have made a few additions to our ST1100, with the intention, as you have, to make the distance an easier more pleasurable experience. 🤓👍
@MRMRS2wheeler5 ай бұрын
Thanks for watching. Glad you found it useful 👍
@ryanmalone26813 жыл бұрын
That electrical work is very clever.
@MRMRS2wheeler3 жыл бұрын
Thanks, and everything still works 😜
@WingmanC2 жыл бұрын
Just bought a BMW RT 1200RT! I'm super excited to hit the road!
@MRMRS2wheeler2 жыл бұрын
That's awesome 👍 Get out there and enjoy. Ride safe.
@rodneybarcus22335 жыл бұрын
Very cool what you did. That's more wiring than I've seen most people do. I had an st1300. It was a good bike. The only thing for me and my wife on a road trip was the lack of storage. Thanks for posting.
@MRMRS2wheeler5 жыл бұрын
Rodney Barcus thank you. We had that issue for 2up touring in the beginning too. We added a 56 liter Givi top case and we have been fine since. We go moto camping all the time and once you learn to pack right for the ride, the storage room is sufficient. Thanks for watching.
@rdmcgreanor4 жыл бұрын
Hi Mike! My bike might be alittle overkill, But I added an auxiliary 12 port fusebox from the main battery controlled by a relay....so when I kill the switch everything goes off! Also I ran a snake of 6 sepperate fused wires to the front of the bike run my accessories! A clearview taller winscreen with a vent! A inflatable Butt cushion! I also converted all the light bulbs and reflectors to led to save power! With an led underbody kit. I also went with the Kuryakian iso is grips...with crampbusters. And last but not least a Breakway cruse control.... Geezz...im out cintrol!..haha
@MRMRS2wheeler4 жыл бұрын
Great mods. Not overkill at all. If we're going to spend a lot of time in the saddle, we need to make these modifications for our comfort and safety (that's what I tell the Mrs, lol). What kind of bike is it?
@rdmcgreanor4 жыл бұрын
@@MRMRS2wheeler 2010 suzuki burgman 650 executive
@MRMRS2wheeler4 жыл бұрын
@@rdmcgreanor Nice ride. Do you have a trip planned?
@rdmcgreanor4 жыл бұрын
@@MRMRS2wheeler I'm trying to get all my gear together I wanna do some motorcycle camping there's a couple national parks in my area I'm gonna be doing it solo some a little nervous!
@MRMRS2wheeler4 жыл бұрын
@@rdmcgreanor I know what you mean. I did a solo ride for the first time from Florida to Wyoming and I was nervous. But once I got on the road, it was smooth sailing....or rolling haha.
@amitkrupal12343 жыл бұрын
Made me to subscribe on first part itself was considering using the mentioned technique but was not sure about its possibility. Thank you for sharing this. Liked & subscribed.
@MRMRS2wheeler3 жыл бұрын
Glad you found it useful. Thanks for subscribing. 👍
@user-vo1lr1er7h4 ай бұрын
*Thank you so much 🏍️*
@MRMRS2wheeler4 ай бұрын
Glad you enjoyed it. Thanks for watching 🙏
@Babybugex3 жыл бұрын
Heli Bars will be here next week. Corbin canyon seat and I made some HWY pegs that just attach to the crash bars. Great vid thanks hope to see you out there.
@MRMRS2wheeler3 жыл бұрын
Man, sounds like your getting ready for some serious miles. Maybe we'll cross paths sometime. Ride safe Mike
@billfrater19485 жыл бұрын
Handle bar muffs with heated gips, perfect match. Only problem on the ST1300 is it covers a small part of the mirrors.
@MRMRS2wheeler5 жыл бұрын
Since I have Heli bar risers, my mirrors are already partially covered so that wouldn't work for me. But I can see how that would be a great match. I am actually looking into bark busters, just to keep the wind, rain, and flying debris off of my hands.
@christopherj8280 Жыл бұрын
Nice vid. Intresting mods. Just got my Pan. Btw givi do a power connector for their boxes also.
@MRMRS2wheeler Жыл бұрын
Thanks. They do, but it's very low power. Not useful for charging a drone or camera batteries. Thanks for watching.
@christopherj8280 Жыл бұрын
@@MRMRS2wheeler Yeah i have to say i like your option better.
@MRMRS2wheeler Жыл бұрын
@@christopherj8280 thanks, it works well for me. It took around 30 minutes to complete.
@philtil89772 жыл бұрын
Great videos! It occurs to me your type of riding and add-ons you installed might lead you to a Goldwing? Several of your items are included on a tour model and the others are available for additions. IMHO, I would suggest a 2021 or 2022 GW tour with a DCT transmission. The DCT will rock your world as it has mine. The DCT is a 7 speed with gears 5, 6 and seven all being overdrives! In addition, it also has a reverse and forward 'walk mode' that runs off the starter/alternator and not part of the transmission! Don't forget, you can let it shift or manually shift with finger controlled 'paddle' levers! Four electronic ride modes along with electronic load control, wow! Many of the other pluses you talked about are on the GW with a few critical updates made in 2021 and carried into 2022. These years are identical except color choices. Fuel was decreased by a gallon and many folks have been bashing this change BUT...they have not 'done their homework.' The new GW gets better mileage then the previous generation. I have owned both of these last generations (and an original 1975). Recent past generation touring mileage, 42 MPG. My 2021 DCT touring mileage, 45-55 ! Yes, 55. The 55 was not at 75 MPH on an interstate but you get the idea. My average overall is in the high 40's, 47 or 48. Good Rides
@MRMRS2wheeler2 жыл бұрын
Thanks for the great info. I have seriously considered the Goldwing as our next bike. I admit, I did consider the gallon less in the tank as a drawback, but I guess the better mpg makes up for it. But, it would be nice to have both. Better mpg and the extra 50 mile range. In the end I guess the total tank range is what's important.
@philtil89772 жыл бұрын
@@MRMRS2wheeler I rode 50,000+ miles on my 2008 GW ABS with 42 MPG every time while touring. Touring is 97% of my riding. My 2021 has given me a range between -30 to +40 per tank, depending on where I was riding and the speed. My older GW never went above the 42 even when I was riding in extended slower conditions, as in all day in a national park...my new GW will show much higher MPG when riding in those same slow cases. Good Rides
@MRMRS2wheeler2 жыл бұрын
@@philtil8977 SO the big question I have, is what is the range you get per tank?
@philtil89772 жыл бұрын
@@MRMRS2wheeler My trips are varied but my average is 260-275 maximum. I don't want to push the limit too often so my stops are 225-250. My rear end is always ready for a break by then and most of the time before then. Good Rides
@MRMRS2wheeler2 жыл бұрын
@@philtil8977 @Phil Til Ok, so that it about the same as I am getting now with the ST1300. I usually stop every 250 miles to fuel up. Thanks for the info. I appreciate it. RIde safe.
@philly.d64895 жыл бұрын
Great and informative video Mike thanks for sharing what you've done to your bike I really appreciate the information and new ideas and I will try to utilize a few ,thanks again ...👍
@MRMRS2wheeler5 жыл бұрын
Philly .D Thanks buddy. I'm glad you got some value from this. I had fun shooting this with my son. He was behind the camera most of the time.
@albertmcwilliams65053 жыл бұрын
Thanks. Great video. It gives some excellent ideas for touring and doing better on long distance.
@MRMRS2wheeler3 жыл бұрын
Glad you enjoyed it. Thanks for watching.
@0628093 жыл бұрын
Very cool. Great idea on those fuel canisters. Ride safe. Cheers.
@MRMRS2wheeler3 жыл бұрын
Thanks buddy, stay safe.👍🏻
@TheBlueBikeDoyle5 жыл бұрын
Great advice. I got one dont over do it stop and take breaks. Thing about traveling on a bike it's to enjoy it's not race to see how quick you can get to your destination.
@MRMRS2wheeler5 жыл бұрын
The Blue Bike & Doyle couldn’t agree more. I am guilty of racing to get to our destination, I need to slow down. Thanks for the reminder.
@lalmic2009 Жыл бұрын
Hi Mich, Could send me a photo some photos,of how you attached the two tank canister. Thanks. Michael.
@MRMRS2wheeler Жыл бұрын
Hi Michael, send me an email to mandm2w@gmail.com
@deepsquat6003 жыл бұрын
I have an FJR 1300 ..and have done most of these upgrades..except the fuel cans .. I will think about it . I might also add for those suffering the seat problems..try a Purple Seat pad or aIR HAWK.. i IN FACT HAVE USED BOTH AT THE SAME TIME ..OR WILL MIX AND MATCH DURING A LONG RIDE :) a Laminar Lip if your screen isnt high enough ,,and drop pegs if pegs not low enough :)
@MRMRS2wheeler3 жыл бұрын
Great additions. Thanks for sharing.
@saishyamnilgiri13 жыл бұрын
Hi! Thank you very much for your time and effort doing these videos. Much appreciated. I wish I could buy a bike like this. I'm dreaming.
@MRMRS2wheeler3 жыл бұрын
Thank you for watching and commenting. I'm sure you can get bike like this if you try. Stay safe.
@r12rtpilot4 жыл бұрын
Several Go Pro cameras charging all the time, controlled by a handlebar mount. I like it!
@MRMRS2wheeler4 жыл бұрын
Thanks. When you're filming all day, its a must have.
@ronchyrocha8773 жыл бұрын
Loved the tool tube with MSR cans
@MRMRS2wheeler3 жыл бұрын
Thanks. They have gone in very handy.
@Youk709 Жыл бұрын
Great video Mike. Thanks for posting. I have a ST1300 as well and picked up a set of GL1800 tip-over bars for my ST, but can't find the the adapter plates anywhere. If you don't mind me asking, where did you get you adapter plates from?
@MRMRS2wheeler Жыл бұрын
@Youk thanks buddy. I got them from the st-ownerss.com forum. There was someone making them. Not sure if they still are Either way, it's a great forum for st owners. Lots of useful info, and great members. Just an awesome community.
@Youk709 Жыл бұрын
@@MRMRS2wheeler Thank you for the reply Mike. I checked the st-owners forum but the person that was making them has since stopped. I assume the price of materials now a days doesn't make it feasible. As you said, it is a great forum for ST owners and the members have a wealth of knowledge, like yourself. Thanks again and hope you're recovering well. Looking forward to watching your next adventure. Take care.
@MRMRS2wheeler Жыл бұрын
@@Youk709 Price of materials may very well play a role in it. It is an awesome forum, I have been a member for many years, and have met many members on RTE's and RTC's, events that they host across the US. The recovery is a slow and painful one and sadly I might need a second surgery. Riding is out of the question for now, but I am starting to plan some review videos. Stay safe and thanks for the support Mike
@MRMRS2wheeler Жыл бұрын
found a post that might be of interest to you. Look at post #6 by dduelin. He managed to get them on without the adapter. www.st-owners.com/forums/threads/tip-over-guards.143017/#post-1821750
@Youk709 Жыл бұрын
@@MRMRS2wheeler Interesting. Thank you very much. I appreciate the link.
@annad75794 жыл бұрын
Great video. We just bought our st1300. I have a question, does your wife is riding st1300?
@MRMRS2wheeler4 жыл бұрын
Thank you. You will enjoy that motorcycle. To answer your question, no she does not ride it, but she is my passenger on almost all my rides.
@Agustin-jo8mv2 жыл бұрын
No tire pressure monitoring system? I had two tire incidents in two weekends. I found it really hard to tell my tire was flat and rode on it for too long. I tore up the side wall of a still good tire. 😅 Woopsies. Lol. I've had a rear flat before, but I just couldn't tell on this fjr1300.
@MRMRS2wheeler2 жыл бұрын
@Agustin I do have a TPMS system on the bike. Not sure if I had it when I made the video or if I just forgot to include it. It has saved my butt more than once. I did a video on it here: kzfaq.info/get/bejne/gr2EmLyCvLrTgHk.html Thanks for watching and commenting.
@motorcycleden5 жыл бұрын
Excellent video! Let's see? On the fjr, we had very similar mods. On the ultra, we haven't added much for comfort other than highway pegs. I do have a drivers backrest but haven't installed it yet. We also have a beverage holder but need to come up with a tube long enough to reach Mrs Den.
@MRMRS2wheeler5 жыл бұрын
Thanks buddy. Happy Easter! I also have a drivers backrest which I never installed. I have a cup & a bottle holder which I only use on short day rides. For the long rides, I have a Platypus 3 Liter Water bladder in the tankbag. The hose is plenty long for the Mrs. I'm sure you can buy a longer hose to fit.
@marshall34985 жыл бұрын
Motorcycle den you have a drivers backrest? What seat did you have on the fjr? I didn't know they made a seat with a for fjr with a drivers backrest just one for the passenger
@El_chico26121 Жыл бұрын
Good video i wan the stereo too ✌️🤙
@MRMRS2wheeler7 ай бұрын
👍
@lalmic20094 жыл бұрын
Great modifications! Where did you get the RAM mount that you have on your dash ?
@MRMRS2wheeler4 жыл бұрын
That's called a dash shelf. There was a company that made them year's ago but they are no longer selling them. There is another company that makes something similar. psr-usa.com/st1300-abs-dash-shelf.html#.XhpmoRhOnqs
@artiemurillo475 ай бұрын
great video
@MRMRS2wheeler5 ай бұрын
Thanks. Glad you enjoyed it.
@joshmoore61657 ай бұрын
I`m having trouble figuring out a lot of your mounting hardware. (3:02) On your faring you have a triple ball setup. Where can I find that plastic/metal piece where the three ball mount to?
@MRMRS2wheeler7 ай бұрын
The mount you see there is called a dash shelf. The company no longer makes them. I was able to find a post with lots of useful info and resources for the shelves. www.st-owners.com/forums/threads/who-still-makes-a-dash-shelf-for-st1300.171577/ I hope this helps. Thanks for watching.
@marklloyd41533 жыл бұрын
That looks like a DCT transmission bike which is also a great add on for longer trips . I have a 6 speed FJR but I think I may add a Goldwing to my garage and it will b DCT .
@MRMRS2wheeler3 жыл бұрын
Hi, the ST is a 5 speed, I do wish it had the extra. gear. I have been eyeing the Goldwing as well. It looks SOOO comfortable.
@mytube36872 жыл бұрын
Great video very useful. If you have to travel cross country, I mean example africa countries. Which brand or model of motorcycle you recommend to buy . Especially in comfortable for long distance and availability of spare parts.
@MRMRS2wheeler2 жыл бұрын
If I was travel in countries like Africa, I would either go with the Honda Africa twin, or the BMW GSA-1200 for their on and off road capabilities. Both have been proven to be great bikes for long distance travel, and due to their popularity, finding parts and getting service on them should be fairly simple. Plus you have the added bonus of many tutorials on DIY maintenance on youtube. Thanks for watching.
@mytube36872 жыл бұрын
Thank you for your advice. I thought also for Honda africa, I have seen it in the KZfaq. And I thought it’s ideal to listen to you people who have experience, it’s always better ask for advice from experience users.
@MRMRS2wheeler2 жыл бұрын
@@mytube3687 Happy to help. I suggest to find a Honda dealer and do a test ride. For me, the African twin was too high.
@RickLincoln3 жыл бұрын
When I'm doing long trips...especially multi-day tours, I use Crampbusters on both grips. It's great to be able to relax both hands and arms while cruising down the road. I have Cruise Control on my bike, but it's difficult to use it except for the occasions when I'm out on the open road and without much traffic. The Crampbusters are amazing!
@MRMRS2wheeler3 жыл бұрын
I agree. I am actually planning on picking up another one for the left grip. Always wanted cruise control, but it's a tough install so I just use the throttlemeister throttle lock. It works great.
@tristandowning5609 Жыл бұрын
I already have the Oxford heated grips, the grip puppies and a throttle rest and the Heli bars riser... But the highway pegs? Does that really work? How tall are you? Im sure my legs would be too squashed
@MRMRS2wheeler Жыл бұрын
I'm 5'8, but know of guys over 6 ft that use them. They work great. Problem is they are hard to find. The company that made mine closed after the owner passed away. There is one company (as far as i know) that makes them for the ST bikes that's PSR. Haven't tried them so can't really comment.
@RVguyReese09262 жыл бұрын
What bracket did you use to mount your top case on the St I have a 09 St thanks in advance you guys have great videos like yourself I'm trying to start Moto camping this upcoming season and prepare myself to do so
@MRMRS2wheeler2 жыл бұрын
It's mounted on the original givi bracket made for my bike and my case. Camping is great fun. You'll love it. 👍
@RVguyReese09262 жыл бұрын
@@MRMRS2wheeler Thanks
@MRMRS2wheeler2 жыл бұрын
@@RVguyReese0926 glad to help. Feel free to ask any other questions.
@gnomad422 жыл бұрын
Thanks. Just bought a ST1300 and your video was one of the first recommended to me for upgrades. SOme power lines to the top box are now on the farkle list.
@MRMRS2wheeler2 жыл бұрын
Congrats on the ST. Glad my video was useful. Ride safe.
@MarcoGesiot8 ай бұрын
3.04 love that RAM mount on top of the dashboard. Did you do it yourself ? Any hint on how to replicate it? HOnda ST1300 2010 owner from italy. Ciao
@MRMRS2wheeler8 ай бұрын
Ciao Marco, those ram mounts are great. I did not make them myself, I purchased them years ago. I'll try to find where I bought them and let you know. We were in Italy for 2 weeks this summer and I didn't see any st1300 there. I was looking. Ride safe, and happy holidays.
@MRMRS2wheeler8 ай бұрын
I could not find the original like I have, it might be discontinued, but I did find something very similar. I really like this design too. www.st1300-accessories.co.uk/product-page/dash-mount Hope this helps.
@MarcoGesiot8 ай бұрын
@@MRMRS2wheelerThank you 1000 !
@MRMRS2wheeler8 ай бұрын
@@MarcoGesiot Prego. Buone feste.
@ToddBryantsr4 жыл бұрын
Great video Mike. What do you use for routing / mapping ? Any GPS solutions?
@MRMRS2wheeler4 жыл бұрын
I use a combination of google maps, and honda trip planner. Then after planning, I export it to my Garmin Zumo 665.
@kirklandr35 жыл бұрын
Excellent video , Mike
@MRMRS2wheeler5 жыл бұрын
Rick Kirkland thank you My friend.
@carlanepoole2457 Жыл бұрын
Would love the info on that gopro remote mount
@MRMRS2wheeler Жыл бұрын
I tried to find you a link on Amazon/Ebay etc. But had no luck. This is the product link from the manufacturer www.smatree.com/Products/1145.html Maybe you'll have better luck tracking one down. I did see it as a bundle with a selfie stick for around 35 bucks here: amzn.to/3ZAZ4nN If you can use a selfie stick, this one is pretty sweet being carbon fiber. Hope this helps. Thanks for watching. Mike
@luc1ferblack3 жыл бұрын
You have brilliant mods like the gas tubes
@MRMRS2wheeler3 жыл бұрын
Thanks buddy. Ride safe
@notchristian42 жыл бұрын
Finally got my ST1300 and working on some modifications now! I’m extremely excited and so far I’m loving the bike. One thing I’m interested in doing is adding the Ram ball mounts seen in your video here. Do you have any details on how you made these mounts work or your install process?
@MRMRS2wheeler2 жыл бұрын
Congrats on the ST. The mods is the fun part. Which ram ball mounts are you referring to? I have 8 total on the bike.
@notchristian42 жыл бұрын
@@MRMRS2wheeler Oh wow I didn’t realize you had 8!! That’s awesome! Currently mine only has one. The ones on your “dash” where the windshield begins. Looks like you have 3 right on the top
@MRMRS2wheeler2 жыл бұрын
@@notchristian4 yeah I Have 8 mostly for the cameras, to get different angles. The one you're referring to is called a dash shelf. Those are kind of hard to find. There was a guy making them custom for the St 1300 and 1100. It was on the St owners forum. If you haven't yet, I recommend joining the forum. Lots of great info and tutorials on there.
@tonykeenan12794 жыл бұрын
Great video, do you have a link to the tubes you used for storing fuel? Or sizes please
@MRMRS2wheeler4 жыл бұрын
Thanks buddy. Sure, the link is in the description under tool tube 😜
@georgejean-noel60213 жыл бұрын
you gave a lot of good info.
@MRMRS2wheeler3 жыл бұрын
Glad to help.
@stephenbaines73944 жыл бұрын
The dual connector you have on the bike, what clothing are you using for heating as I’m really interested. Thanks again👍
@MRMRS2wheeler4 жыл бұрын
Hi, I use these: Gerbing Heated liner ,Gerbing heated pants, and Gerbing T5 Hybrid gloves. I found they work really well. I used them on my trip to Wyoming last May, in 30°f temps, rain, mixed snow and hair. and while I did have an issue getting the gloves to work, it turned out I just wired them wrong. You can watch that video here if you're interested. kzfaq.info/get/bejne/m6tzhZZ1q7vTaac.html Let me know if you would like specific links. I'll gladly help you out. Mike
@stephenbaines73944 жыл бұрын
MR & MRS 2wheeler thanks Mike. That’s sounds a great set up. If you could send the links that would be great also. Love your videos and Thanks again
@adriandunn18303 жыл бұрын
Thank you a big well done 🇺🇸🇬🇧🇺🇸🇬🇧🇺🇸🇬🇧🇺🇸🇬🇧
@MRMRS2wheeler3 жыл бұрын
Thanks, I appreciate that. Ride safe.
@lzubiate5 жыл бұрын
Hey Mike, I contact you a few years back asking about your phone holder. It is awesome, I manage to buy one. Slip Grip. I ask them if they could make a visor to protect my phone from the sun and help visibility. They did and they are selling it. You might be interested on. I am sure you will like it
@MRMRS2wheeler5 жыл бұрын
Yes, I remember that. Glad to hear it worked out for you. I will definitely check that out. I need it. I also lost my visor for the GPS in the ride to Wyoming, so looking for that as well. Thanks for the tip.
@24juan682 жыл бұрын
I bought This model in 2008 brand new and I rode it for 200 miles, my back and shoulders were screaming bloody murder so I went back to the same dealership and traded it in for a Goldwing. I lost a lot of money for that mistake, but My only regret was not getting the Gwing in the first place.
@24juan682 жыл бұрын
I forgot to mention the lack of cruise control was a nightmare
@MRMRS2wheeler2 жыл бұрын
Sorry to hear that. Did you not test ride it before making the purchase? A simple fix would have been the helibars, but no you would not have had cruise control. That never bothered me much. The ST & the goldwing are two different animals. The goldwing wins at comfort but can't beat the ST for performance/handling. The goldwing is more suited fol long highway stretches, while the ST will bo loads more fun in the canyons hitting twisties. With that said, I have had no problem riding 600-700 miles a day for 10 days straight, or over 1,000 miles in a single day with the modifications I made. As I get older and more out of shape, my next bike will most likely be a goldwing. thanks for the comment.
@24juan682 жыл бұрын
@@MRMRS2wheeler thanks 🙏
@MRMRS2wheeler2 жыл бұрын
@@24juan68 My pleasure
@MRMRS2wheeler2 жыл бұрын
@@24juan68 no problem
@amitkrupal12343 жыл бұрын
Damn awesome video
@MRMRS2wheeler3 жыл бұрын
Thank you Amit. Appreciate it
@MrBluoct5 жыл бұрын
Maybe check how and when your channel pops up when searching KZfaq and this Honda model- not that common to see your videos...
@MRMRS2wheeler5 жыл бұрын
I wouldn't know where to start. Any suggestions?
@philly.d6489 Жыл бұрын
Hey Mike how did you wire up your heated grips .
@MRMRS2wheeler Жыл бұрын
Hey Doug, I wired them to the fuzeblok to one of the switched plugs, so that it turns off when I turn off ignition. You must make sure you have a high enough amperage fuse, but it's a great failsafe to prevent draining your battery if you forget to turn it off (which I have done repeatedly when I had it wired directly to the battery). Hope this helps.
@nestorbato87234 жыл бұрын
Thanks for your vlog on st1300 which I have as my 2nd bike now beside my FJ13, I’m need to do those modification before my tour this summer,,,Do you think if may not affect much of battery load?......Nestor from Seattle
@MRMRS2wheeler4 жыл бұрын
Thanks, glad you were able to get something from it. I haven't had any issues with electric, and I have a LOT of modifications on the bike. The only time I have a large electrical draw is when we are both running out heated suits. Where are you headed in the summer?
@nestorbato87234 жыл бұрын
MR & MRS 2wheeler Our plan going Idaho & Utah
@MRMRS2wheeler4 жыл бұрын
@@nestorbato8723 We might be heading out to Utah Colorado and Wyoming area next week Have a safe trip.
@lzubiate5 жыл бұрын
Hi Mike. The 3 Ram balls you have in your console. I would like to get a hold of it. I have not seen it in the Ram site. Do you know where to buy it? Code?
@MRMRS2wheeler4 жыл бұрын
Sorry for the delay in replying. That piece is not from Ram. It was custom made for the St1300. I purchased it from the St-owners website through one of the vendors there.
@luc1ferblack4 жыл бұрын
bikequip sell it
@lzubiate4 жыл бұрын
Jason Leo thks
@Lost_Wind Жыл бұрын
Hi...whic GPS bracket (Ram mount) you have? Shows in 03:04 min. Thnx
@Lost_Wind Жыл бұрын
Where did you buy the navigation mount? The holder shown in the video at 03:04 minute. Thnx for answere
@nzbeeker14 жыл бұрын
Nice video. Have just subbed. My ST is an 07 also.
@MRMRS2wheeler4 жыл бұрын
Thanks. Great bike and silver is the fastest color 😉
@nzbeeker14 жыл бұрын
Oh no... I have always been of the understanding that red ones go faster 😛🤦♂️😏
@lalmic20094 жыл бұрын
i have the same bike as you so your reference would be nice. Thanks
@MRMRS2wheeler4 жыл бұрын
Hi, what kind of reference are you referring to?
@tay5t4 жыл бұрын
Great video, I've had my ST1300 for less than a year. I've been trying to find those highway pegs in your video, where'd you get them? Thanks
@MRMRS2wheeler4 жыл бұрын
Great bike isn't it? The highway pegs I have were from a company called MCL, but they are not producing them anymore. There is an upgraded version to them, which I would like to replace mine with by a company called PSR. Here is the link: psr-usa.com/st1300-02-13-highway-blade-black.html#.XlQDPZNKhTY Only downside to them is that you have to cut your own crash bar cover, where as MCL included new ones in the kit. They do provide a template, but I am a chicken when it comes to that stuff 😉 Thanks for the kind words on the video.
@luc1ferblack4 жыл бұрын
You maybe able to build a set pretty easy. 3 strips of metal bar. lay one on top and one underneath the crash bar and bolt together. At the front end insert a spacer between the bars and place the third bar laid on top drill a hole and bolt through the bar laid on top down through the spacer and through the lower bar and bolt together. if you want the top bar to sit closer to the bike you will have to notch it where it touches the bolts holding the top to the bottom. make sure the end nut is tight making the fold out a little hard. sit on the bike and fold the bar out to where you want it. get off the bike and drill a small hole between the blade bar and the brace bar underneath. remove the top bar (blade bar) and cut the corner into where the small hole is. bolt a small bolt through the top bar. reattach the blade bar. now when fully extended the blade bar will hit the small bar and prevent it going further round. you just saved £240 to cut the cover fold the blade in and put some vaseline along the edge. replace the crash cover and with a little screwdriver push the blade untill it hits the cover remove the cover and cut a line using the vaseline as a guide
@MRMRS2wheeler4 жыл бұрын
That is some impressive engineering. Sounds like you have some experience in the field.
@AymanOkaby4 жыл бұрын
Perfect
@MRMRS2wheeler4 жыл бұрын
Ayman Elokaby thanks!
@edsuebritt8522 жыл бұрын
Where did the extended foot pegs come from
@MRMRS2wheeler2 жыл бұрын
The foot pegs are standard. Are you referring to the crash bars?
@teamflood8633 жыл бұрын
Did you build the brackets for the tool tubes? Did you make a template by any chance? Recently got some but trying to figure out where to put them etc...
@MRMRS2wheeler3 жыл бұрын
I did build it. It was a very simple install. Just a metal plate that I drilled a few holes and mounted. No template, but I might have some pics. I'll look for them and let you know. What bike to you have?
@teamflood8633 жыл бұрын
That would be great. I’ve the 1300 also but with the Honda topbox and mount. But be good to see how you mounted.
@MRMRS2wheeler3 жыл бұрын
Give me a few days, I'll dig them up. Send me an email to mrandmrs2wheeler@gmail.com, so I can email them to you.
@MRMRS2wheeler3 жыл бұрын
Email sent 👍
@avscstream6255 жыл бұрын
Great Video! Thank you for your work! One question, what size is that GIVI? Im about to get one and I'm debating over the 47 liter vs the 56 liter. Also, does it cause any disruptions for your passenger? I will have my wife on board as well. Thank you!
@MRMRS2wheeler5 жыл бұрын
Hey thanks. The Givi I have is a 56L. At the time was the biggest. I LOVE it! We can fit both our modular helmets in there. Large (mine) & small (hers). The wife doesn't complain at all. I added the Givi backrest, and she loves it. Hope that helps. Ride safe.
@avscstream6255 жыл бұрын
@@MRMRS2wheeler Thank you for the fast reply! I am going to copy a few of your mods!
@MRMRS2wheeler5 жыл бұрын
@@avscstream625 great. Let me know if you have any questions. Glad to help.
@MRMRS2wheeler5 жыл бұрын
@@avscstream625 Great. Glad the video was useful.
@hardcore883 жыл бұрын
I also have the Givi 56L top trunk(remember when we called them Scoot Boots?) on my 2016 Kawasaki Versys 1000LT. I also bought the pad for my wife. She doesn't like the pad because it makes her lean forward. I've removed it. It all depends on how the Top Box fits on your bike. It looks like your Givi is a little more rearward on the ST1100. Also full disclosure: we used to have a 1985 Goldwing Aspencade which we called the 2 wheel Barcalounger. My wife doesn't care for the Versys because it places her too high, so most of our touring is done on a 1014 Dyna Super Glide Custom with a Corbin dual touring seat. I love the Versys, so I'll just have to enjoy it on solo tours & day rides in the twisties.
@xc-wild27554 жыл бұрын
Just bought a 05' ST1300. Going to Alaska from the northeast. Wondering what your thoughts are on aftermarket cruise control? I see you use the throttle lock and cramp buster.
@MRMRS2wheeler4 жыл бұрын
Congrats, you're gonna love that bike. I considered cruise control, but the dealers don't want to install it (it's a liability) and I don't trust myself with that install. I use the throttlemeister with the cramp buster like you mentioned, and I have been extremely happy with it. Had it on my CBR before the ST and never had any issues. That combination has worked very well for me on the long distance rides. Alaska has long been on my bucket list. Going to do it in summer of 2020 but from Florida. Planning on at least 3 weeks on the road. Have a safe ride. And do all mods/farkles long before your trip.
@xc-wild27554 жыл бұрын
@@MRMRS2wheeler Thanks for all the tips and videos. You've inspired me to get out there and do it. I will try and vlog the trip too. Thanks again.
@MRMRS2wheeler4 жыл бұрын
@@xc-wild2755 glad to hear it. Thank you for watching. Safe travels.
@The_Touring_Jedi4 жыл бұрын
www.conrad.de/de/p/waeco-geschwindigkeitsregler-851329.html?sc.queryFromSuggest=true This one you can order from Europe. I was driving the bike with same model of cruise control. It is a lot cheaper than one from Australia. The problem is you need to find someone to mount it. The problem is, I'm not sure if they are making the same one. On this website they are all sold. Maybe you can look for the model in the USA or Canada? Anyway this fits ST1300.
@MRMRS2wheeler4 жыл бұрын
Sorry for the late reply. I somehow didn't get a notification for this message. Thanks for the tip. I'll look into it.
@michael30802 жыл бұрын
We’re did you get hwy pegs
@MRMRS2wheeler2 жыл бұрын
Those pegs are from a compony called MCL. They are no longer in business. There are some people selling them on St-owners.com website evey now and then.
@stephenbaines73944 жыл бұрын
Hi, I’ve just installed two USB power outlets like yours and was wondering if you could show me where the are both connected too? The ones I’m talking about are the one on the right side at the front and the one on the ride side rear for the passenger. .thanks in adavance
@MRMRS2wheeler4 жыл бұрын
Hey there. I installed both USB outlets and connected them to the Fuzeblock shown in the video at 9:31 that is under the seat. You can connect it straight to the battery, but I wanted everything to shut off when I turn of the ignition so it's not draining the battery. Hope this helps. Ride safe.
@stephenbaines73944 жыл бұрын
MR & MRS 2wheeler thanks so much for your reply. Could you send me a pic of the actual connection as I’m not that electronically savvy when it comes to this stuff. I’ve attached mine to the battery terminals but it means that it’s on all the time which is not what I want. I love the video you shared and I’m following your lead as what you have done is just awesome. Thanks again in advance 👍
@MRMRS2wheeler4 жыл бұрын
@@stephenbaines7394 Sure. But first of all, do you have a fuzeblock? If not, then your only option is the battery, or maybe tap into the headlight or some other accessory that only comes on when you switch on the ignition. What kind of bike is it?
@stephenbaines73944 жыл бұрын
MR & MRS 2wheeler it a ST1300 2005. No I don’t have a fuzz box. Do you know how to connect it to the headlight fuse as you mentioned? I’ve only connected the front right compartment USB so far to the battery and I’m waiting for the passenger USB to arrive. Thanks so much for your help, I really appreciate it👍
@stephenbaines73944 жыл бұрын
MR & MRS 2wheeler sorry fuzeblock🤷♂️
@michael30802 жыл бұрын
And what about fuel carrier
@MRMRS2wheeler2 жыл бұрын
That link is in the description: amzn.to/2JrKeM5
@MRMRS2wheeler5 жыл бұрын
Happy Easter Everyone! These are some of the modifications we made to our bike. What mods have you made to make your ride more comfortable"
@yaitsred3 жыл бұрын
I ride a 2002 ST1100ABSII, my top comfort farkles was electronic cruise control. I have heated grips, I run power to my tank bag and tail case. Helibars, Corbin saddle. Wind deflectors, both on the mirrors and fairings. Just added a Givi Airflow adjustable windshield. Enjoy, cheers
@MRMRS2wheeler3 жыл бұрын
@@yaitsred you win the farkle challenge. 👍🤣 Ride safe buddy.
@yaitsred3 жыл бұрын
@@MRMRS2wheeler have to wait till the snow is gone. ;)
@MRMRS2wheeler3 жыл бұрын
@@yaitsred Soon enough buddy
@ryanharriss79504 жыл бұрын
Good vid.
@MRMRS2wheeler4 жыл бұрын
Thank you. Hope you got something from it.
@ryanharriss79504 жыл бұрын
@@MRMRS2wheeler yes, thank you tbh wasn't expecting a reply but certainly a good few pointers (vfr800 owner going on a trip soon) though now, having to think about this virus outbreak. Look forward to watching more of your vlogs. R
@MRMRS2wheeler4 жыл бұрын
@@ryanharriss7950 I reply to all my comments so you can always expect a reply sooner or later 😉 I almost purchased the vfr. Great bike. Where are planning on heading? This Corona is becoming a serious issue. I hope it doesn't change your plans or our plans of Alaska this summer. I appreciate you watching and contenting. Ride safe.
@joshmoore6165 Жыл бұрын
I wish I could get this seat thing figured out.
@MRMRS2wheeler Жыл бұрын
What can't you figure out?
@joshmoore6165 Жыл бұрын
@@MRMRS2wheeler I called Russell to open some dialog about their "day long" seat. They have a 3 month timeline before they can even work on my order. I have to also mail them my original seat while they do the work. I hear a ton of complaints and praise for Corbin seats. I dont know man, spending 6 to 800$ on something that I will be disappointed in really turns me off.
@MRMRS2wheeler Жыл бұрын
@@joshmoore6165 I hear you Josh, the struggle is real. Finding a comfortable seat is very tricky. The best tips I can give you are: 1. Find someone with a similar bike and try out their seat. 2. If you live near Russel, you can actually drive in and get the work done in a much shorter time period (a few days) and depending on the bike, they sometimes have a few seats laying around that they will let you burrow while they are working on it. 3. Ask people what they have and if they are happy with it. More specific, how long they spend in the seat before getting uncomfortable. 4. If you do go the RDL route, you could purchase a used seat (OEM for you model) and send that one in. Condition isn't very important as long as the actual seat pan is in good shape. They replace everything else. Russel Day Long seats have a great reputation with the "Long Distance" riders for a reason. They build the seat specifically to your body, bike, and riding style, while most seats are a "one size fits all deal" I got lucky with my Saddlemen seat as it came with the bike. I would have never purchased it otherwise. I had a corbin on my last bike and I hated it. I found it way too stiff and unforgiving for long rides. I intend on getting a RDL at some point and I have a spare seat to use while the work is getting done. Hope this helps
@joshmoore6165 Жыл бұрын
@@MRMRS2wheeler Great advice, I really do appreciate it. I may just tough it out, and go with the RDL after all.
@MRMRS2wheeler Жыл бұрын
@@joshmoore6165 Glad to help. I don't think you could go wrong with RDL. Just send them all the pictures they ask for. The more detailed the better they can make your seat. And if I remember correctly, they offer one or two adjustments after you receive it incase there are any issues. Keep in mind one thing, the RDL seats do raise you higher than the stock seat. If you barely touch the floor, that may be an issue.
@howardphillips71343 жыл бұрын
I LIKE BEING OLD SCHOOL NO CAMERA S JUST A BIKE RIDER AND ROAD REALLY DON'T CARE ABOUT PEOPLE SEEING MY TRIP It's called RELAXING
@MRMRS2wheeler3 жыл бұрын
Whatever works my friend Ride safe.
@redhorsegarage3 жыл бұрын
Does your GP remote turn on/off both GPs in synch?
@MRMRS2wheeler3 жыл бұрын
When it wants to work, it does. It controls alll of them. But sometimes when the hero 7 is turned off, it won't turn on while the hero 4 and session do. Go figure. I asked GoPro about it, their response was " the remote is not made for hero 7".
@redhorsegarage3 жыл бұрын
@@MRMRS2wheeler Thanks..... !!
@MRMRS2wheeler3 жыл бұрын
👍
@ianross54924 жыл бұрын
Do you have a link to where I can buy the tool tube.?
@MRMRS2wheeler4 жыл бұрын
We are on a moto camping trip right now, I'll get it when I get home Sunday.
@ianross54924 жыл бұрын
@@MRMRS2wheeler thanks for the response. Have a great trip.
@MRMRS2wheeler4 жыл бұрын
Here you go www.twistedthrottle.com/dryspec-motorcycle-tool-tube-kit?gloc=1&gclid=Cj0KCQjw6KrtBRDLARIsAKzvQIHTwFll8vTM4HTsZtw6Djo44lIEFGtfnlChL366eM20N2X4yPKJE6QaAl3qEALw_wcB
@ianross54924 жыл бұрын
@@MRMRS2wheeler thanks a lot . I've just spend my sunday watching about 5 episodes of your trip.
@MRMRS2wheeler4 жыл бұрын
@@ianross5492 I appreciate that. Thanks for the support.
@ashingco4 жыл бұрын
how do you deal with weight of the bike?not to drop it?
@MRMRS2wheeler4 жыл бұрын
The bike handles very well for is size and weight. It maneuvers like a smaller lighter bike. I have to be more cautious and smooth with it when it's loaded and the Mrs is on the back, but it's not difficult. That's not to say I haven't had some close calls.
@ashingco4 жыл бұрын
MR & MRS 2wheeler ,I got my st last March 25,and so far I have drop it 3x already,but I’m learning how to deal with it,I love the bike though,thanks for your input and enjoy the ride and be safe.appreciated.
@MRMRS2wheeler4 жыл бұрын
@@ashingco That's not fun. It's a heavy bike to get back up from a drop. Are they just tipovers, or drops while riding? One thing I learned, is no abrupt stops, or launches with the bars turned.
@ashingco4 жыл бұрын
MR & MRS 2wheeler 2x in the garage, one in the corner intersection a block from my house,like u said I should be carefull,the handle bars should be straight and in plain stable pavement or road,Im learning man thanx again.
@MRMRS2wheeler4 жыл бұрын
@@ashingco I'm sure you'll get the hang of it. Then you'll really enjoy that bike. It's an awesome machine. Stay safe!
@mikkei35322 жыл бұрын
gopro -are you joking????
@MRMRS2wheeler2 жыл бұрын
Not joking at all. To make these videos, I need to have GoPro's on the bike. This is my specific setup.
@szatanica13 жыл бұрын
The music is a bit too loud, it’s hard to hear you:(
@MRMRS2wheeler3 жыл бұрын
Thanks for your input. I'll made adjustments in future videos. Ride safe Mike
@franklabs37663 жыл бұрын
300$ for highway pegs? thats crazy
@MRMRS2wheeler3 жыл бұрын
agreed. But I can tell you, it's worth it. If I had to purchase it again, I wouldn't hesitate.
@reinharddesar60054 жыл бұрын
Hey my Friend how are you and Nina 🤗
@MRMRS2wheeler4 жыл бұрын
Hi my friend, we are good thanks for asking. Not doing any long trips yet, but maybe soon. How are you?
@capitanvonchickenpants84923 жыл бұрын
I've got a valkyrie and the tank range is pathetic
@MRMRS2wheeler3 жыл бұрын
You might need the fuel tubes mod.
@MrBluoct5 жыл бұрын
Why a 1300 ?
@MRMRS2wheeler5 жыл бұрын
A 1300 is a bigger engine which has the power to carry 2 riders and all the gear (and there is lots of it). Being so powerful, it doesn't strain as much over long rides and will last much longer then say a 600cc. Plus the power feels REAL GOOD 😜
@MrBluoct5 жыл бұрын
MR & MRS 2wheeler Thanks. Just subscribed ISO of a cruiser A bit conflicted as to the community surrounding Harley’s as dominant and interesting, but the seemingly performance and mpg issues for many of us that do not own cycle shops or are hyper-connected in that manufacture’s industry A few 1300s around My state sold quickly Maintenance issues? Handling ? And that wobble reference associated with fork springs rear weight windshield height or 🤔 Current mileage ? Plans to keep, trade, or? Cruising speed - 70-75 - stable? Tire selection and why? Are you, wife retired? Appreciate the content!!! Thanks!
@MrBluoct5 жыл бұрын
MR & MRS 2wheeler Like the fuel carry I rarely see that detail Can you list the manufact for select parts So those crash bars are standard gold wing crash bar with a custom mounting plate ?
@MrBluoct5 жыл бұрын
Modified windscreen?
@MRMRS2wheeler5 жыл бұрын
@@MrBluoct It's an aftermarket. Made by VStream. If you want a list of specific parts, shoot me an email to Mrandmrs2wheeler@gmail.com and i'll be happy to provide you with specifics and links.
@luc1ferblack4 жыл бұрын
I like your helibar horizion handlebars. would also like to get the footpegs but they are not cheap. for mine i made a luggage shelf very similar to how a tow bar mounts to hold a 5kg tent its super handy and for you would hold a full size fuel bottle or a bigger flat canister type. i have a video kzfaq.info/get/bejne/qLSHiKWpvrPYlqM.html that shows it. if i were you i would install a led flasher relay and change all the bulbs to natgic 7443 from amazon. i would use red on the brake though as white make it look yellow. for headlights i highly recommend novsight h4 led on amazon you will see my bike in the reviews. i also recommend going to bikequip and getting a rad guard and front and rear fenda extenda worth every penny to prevent long term wear
@MRMRS2wheeler4 жыл бұрын
The helibar horizon are probably my favorite mod on the bike. It adds so much comfort for long distance riding. The highway blades help out when I need to stretch the legs. They run about $250 USD. Well worth it imo. I checked out your video, and man... you take first place in addons haha. I am really diggin that rack on the back. Sweet looking Pan by the way. I have since the video upgraded to LED's on the headlights and the marker lights, but not the brakes (yet). Thanks for the comment and tips. Ride safe
@luc1ferblack4 жыл бұрын
@@MRMRS2wheeler You have given me food for thought. i can build the highway blades for silly cheap by using three pieces of flat steel bar sandwich the crash bar between two bolted together and bolt the third piece on top at the end so it will pivot out but i have a deflector kit so my concern is my legs are forced out too much but i might lose the kit and build the highway blades instead. i also want a driver backrest. helibars look awesome just so expensive and they never come up used. The colour really gets me out of shit when people are not paying attention. The shelf was super easy. thanks for your thoughts be well you have a great bike. Thanks for your video
@MRMRS2wheeler4 жыл бұрын
@@luc1ferblack There is a company here called PSR I believe that make a newer version of these blades. They're supposed to be improved over the old ones. I can look for the link if you are interested. The crash bars are actually from a Goldwing with a plate modified to fit them to the St1300. You can find them on ebay in chrome or black as many people sell them after converting to trikes. I think I paid around $50 USD. I am still intrigued by that shelf. It's brilliant. Thanks for commenting.
@baileysconstruction78983 жыл бұрын
Wouldn’t a gold wing make more sense for your type of riding
@MRMRS2wheeler3 жыл бұрын
I have considered the goldwing, but there a few downfalls that prevent me from pulling the trigger. Fuel range is lower, not as sporty of a ride (which coming from a crotch rocket, I still enjoy) and I am still not ready for the switch to DCT. But it is not off the table.
@baileysconstruction78983 жыл бұрын
@@MRMRS2wheeler the older gold wings are in my opinion more sporty than the new ones
@MRMRS2wheeler3 жыл бұрын
@@baileysconstruction7898 I guess I would have to test ride a few in order to make a decision I won't regret. Thanks for the feedback.
@2404Pepe4 жыл бұрын
Just get an R1200 RT and you'll be all set with almost no modifications. Good video, but for me I think the lay out of all the addones end up being kind of messy
@MRMRS2wheeler4 жыл бұрын
Luis Cuadro Moreno having that many add one can get messy. But the benefits outweigh the mess. I would love to the r1200, but it is a bit pricey for me, especially maintenance and repairs. I love the st1300, for long distance. It is know to be a bulletproof bike mechanically. Thanks for the comment. Happy new year.
@2404Pepe4 жыл бұрын
@@MRMRS2wheeler Thanks for your prompt response. Sorry, I didn't mean that money wyse at all. I guess it's a matter of preferences. For me, personally, I'd rather have an old BMW, but again, that's my taste! haha. I travel all around the Sates with a 2015 RT and no bike can take the beating she does!! haa, thanks again for all your work, really. Great 2020!
@MRMRS2wheeler4 жыл бұрын
Luis Cuadro Moreno no apology needed. I too would rather ride an old bike. Less technology equals less chance for failures. The Rt sounds like a great bike for you. Anything you are happy to ride is the best bike for you. Thanks for the comment and the kind words. Let’s have a great 2020
@2404Pepe4 жыл бұрын
@@MRMRS2wheeler Great response my friend. Thanks for your understanding
@MRMRS2wheeler4 жыл бұрын
@@2404Pepe if you're ever in South Florida, shoot me a message. I'd love to see your rt. Who knows, I might fall in love. Lol
@ryanmalone26813 жыл бұрын
No gloves? Don’t you ever worry that, like all humans, if anything happens you put your hands out are take off all the flesh on your hands? Did you discount mesh gloves? Just seems crazy to me.
@MRMRS2wheeler3 жыл бұрын
Hi, I wear gloves during trips or when we are touring, but when I am riding local I usually don't. I have about 7 pairs of gloves. Leather, mesh, textile, waterproof, heated etc. My problem is I can't find a comfortable enough pair that I can stand for more than an hour. They're are just not comfortable. I do need to keep searching for a more comfortable set that I can tolerate. Thanks, Mike
@hervevdb3 жыл бұрын
The music.......
@MRMRS2wheeler3 жыл бұрын
What about it?
@hervevdb3 жыл бұрын
@@MRMRS2wheeler i have to concentrate a lot to understand what you say. English is not my mother tongue. Otherwise your video is great. I put a like on it.
@MRMRS2wheeler3 жыл бұрын
I see. I will try to keep the music lower next time. Where are you from?
@hervevdb3 жыл бұрын
@@MRMRS2wheeler i am living in south of France.
@hervevdb3 жыл бұрын
@@MRMRS2wheeler I drive a Honda XL 1000 varadero.
@ismailcakmak1698 Жыл бұрын
❤💯🇹🇷👍🏍🛵⚡️✌️⚡️🛵🏍👍🇹🇷💯💯💯💯💯
@MRMRS2wheeler Жыл бұрын
Thanks
@reinharddesar60054 жыл бұрын
Hey my Friend you are and your Nina ok?
@MRMRS2wheeler4 жыл бұрын
Hi buddy. Yes we are all good here. How are you doing? Thanks for the comment.
@reinharddesar60054 жыл бұрын
@@MRMRS2wheeler in 2019 is my Women dead baut my Child helps my y wish you and Nina all Good y Drive with my Pan lang and every Days y was 40 yerars Marry with her
@MRMRS2wheeler4 жыл бұрын
@@reinharddesar6005 Hi my friend. I am so sorry about your wife. That must have been very difficult. I'm glad your child helps you. Thanks for the well wishes for me and Nina. We wish you the best.