Fantastic! I am very happily this will work for you. I love this platform and it’s by far my favorite. Stay tuned for my next build which will be a new storage unit made specifically for pairing with the 88” sleeping platform. This storage unit will fit in the remaining space in the cargo area with the rear seats folded up. Thanks again for watching and commenting.

Thanks for watching and your kind words. Laughing is good and I do intentionally attempt to be funny when narrating. I speak two languages, English and Sarcasm. I am happy you enjoyed this episode and I am glad you didn’t comment about my glove wearing. Check out Ep. 29, you should get a good laugh or at least a smile.

I get a real Red Green feel here and it’s an awesome video.

@@batman5214 Red Green. Ha! My favorite episode was when he used a garage door opener to make Gull-wing style doors on an old car.

Agreed! I work in an industry that always promotes proper PPE and I need to make sure I promote this practice on my channel. In my next episode, I will make sure to wear safety glasses when using the saws. The gloves I might skip based on previous comments and the fact that I probably don’t need them so much for what I am doing. Thank you for watching and commenting.

Thanks. I do my best to see other people’s perspectives and always remain respectful of them. If you haven’t already seen it you should watch Ep. 29.

Thanks for the pronunciation, for the comments, back story, and for watching.

Thank you for watching and commenting.

Thank you for watching and commenting. I am planning some new builds in the near future as soon as it cools down a bit. I live in Texas and every day is a heat advisory.

You are welcome. This is by far my favorite platform of all the builds I have done. There is a ton of space. The fact that it folds up into the cargo area is a great bonus too.

Thanks for watching and commenting. This platform gives me a lot of “me” space too.

😁 Thanks for watching and for commenting. I am happy it was helpful. Stay tuned for more builds. I will get back to it once it cools down here in Texas.

Thanks a lot! I am happy the video was helpful. Excited about your build. Let me know how it goes.

Thanks for watching and commenting.

Fantastic! Thanks for watching and commenting. Would love to see a picture of your build. What model Jeep did you use it in?

Thank you for watching and commenting. Remind me what base you’re referencing regarding the base. Is Robie a typo, is it Ryobi? Did I mention an issue with one of my tools? Thank you for your help and suggestions.

Thank you very much! Thank you for watching and commenting. Stay tuned for more builds in the future.

You’re correct. I am gloveless moving forward.

You’re welcome. Thanks for watching and commenting. It’s my favorite set up and great for solo trips.

My Pleasure. You will love it! Let me know if you have any questions.

Amazing.....Thank you!

Thanks for watching and for your helpful comments. Now that I have added a full size spare inside and raised the cargo floor I am going to build a new platform for two people again. I think something like you described would work well. Stay tuned.

Thanks for watching and commenting. This is my favorite sleeping platform now.

Gloves are a hindrance with a handsaw or drill/screwdriver. I pre-drill holes, that way wood doesn't split or splinter and no slippage putting in screws.

Thanks for watching, commenting, and giving me the correct pronunciation.

I agree. I don’t wear them anymore. Thank you for watching and commenting. Stay tuned for new builds.

You’re the third person to comment on the gloves. I find it interesting as well because I never gave it any thought until everyone began bringing it to light. My father is a carpenter and he never wears gloves and I never wore them either helping him throughout my adolescence and into adulthood. I only ever remember putting on a pair when conducting demo when there were dramatically sharp objects like glass or all plaster and tile with that metal mesh. I put them on during a time when I was slipping a lot with the screwdriver and stabbing myself in the fingers. Every time it happened again, I would think I should be wearing gloves and I guess it stuck. Funny thing is I don’t wear them all the time. I do still wear a glove on my left hand when steadying a screw. On my next build I won’t wear them and I will do my best to keep it up. Minus the glove on my left hand while using the screwdriver. Thanks for watching and commenting. I hope the build was enjoyable and it helped in some way.

He told you why. Pay attention.😳🥳🥳🥳🤣

Thank you. A few people have broken it down for me, but yours is the clearest. Thanks for watching.

😂

Yes, indeed. I have since eliminated the use of them for most occasions. Thanks for watching and commenting. Stay tuned for more builds.

Thank you for watching and for the comments. Please email me at: carcampingwithcarson@gmail.com Include your height and some pictures showing the inside of your car with the rear seats down. Send multiple different pictures from different perspectives. I think I might know someone who drives a Toyota Camry. If so, I would love to do a build. I will be on the lookout for your email.

Thanks for watching and commenting. Yes, REI has done a fantastic job with that “Tailgate Vehicle Sleeping Platform.” It should fit fine in the Crosstrek. You might have to rig something towards the front. You could just make a brace like I did for my platform. The only issue for me is that it’s not long enough. I am 6’ 3” and you also need room for a pillow which is why I made that folding platform so long. Honestly, it could be a bit shorter. I just wanted to see how long I could make it. If it’s long enough for you, I would just buy that REI platform. If you’re a member, you will get 10% back in dividends. You don’t need the 40” wide one. The 25” one is one inch wider then my build and that’s plenty of room. Stay tuned for more builds once it gets a little cooler down here in Texas.

Thanks for watching and commenting. In Episode 30, I show the use of this platform with the smaller built cargo box which holds my food and I put my clothing in a bag which fits inside the folded platform. Keep in mind, I typically only do overnight trips. In Episode 26, I pair the folding platform with the built 48” drawer which has more than enough room for all the things you mentioned. In my next episode, I will work on a new platform for added cargo for longer trips so stay tuned. It’s just been so hot lately that I haven’t felt like building anything.

@@creationsbycarson Understand re. the heat. I just found this channel tonight so haven't watched all of them. Overnight only makes sense you don't have tons of stowage. I'll look for more. Thanks for your quick response.

@@emmyjoyful1 You’re most welcome. Thanks again for watching and for your interest in car camping, it’s a fun way to adventure.

I don’t follow, let’s talk about it…

You are 100% correct! For drilling in screws, handling rough items, and using a hand saw they are great, but they could most definitely be a hazard when working in other scenarios. Your referenced story is awful and I am so sorry this happened to your Father. Was he able to have it reattached? Either way, I am sorry that happened, but appreciate the cautionary tale as it’s reality. Real-life-experiences like this one should be shared with others. Thank you for watching and commenting.

Agreed. I have changed my ways. Thank you for watching and commenting.

Thank you for watching and commenting. I was not aware of a similar option for tall individuals. Please share the link to what you’re referencing. I am always interested in learning about other options. Thanks again.

Thanks for the pronunciation! I love it. I also appreciate you watching and commenting. Stay tuned for more builds coming this year.

Thanks for watching and commenting. I love a good challenge and I enjoyed this build very much. I also understand your perspective. For me, being able to install this platform in seconds seems more efficient in the long run. In all my builds I like to keep the car as intact as possible as I use it as a people carrier 99% of the time. Thanks again for reaching out.

Agreed. I have one now. Thank you for watching and commenting.

Thank you and thanks for watching. Stay tuned for my next build.

Thank you and thanks for watching too.

That’s out of my control, I think, but good to know. I appreciate your comments and for watching.

Hilarious! Love the comments. I have recovered from my addiction to glove wearing and use my bare hands now.

LOL! Love it! This is a great question. Come to think of it, my Dad who is a seasoned carpenter NEVER wore gloves. I worked with him throughout my younger years and I only ever wore gloves when we were doing demo. I think I started to wear them in my builds because I have slipped with the drill, Dremel, and hand saw enough that having a pair of gloves on has prevented small but annoying injuries and kept me from getting splinters. You’re right about dexterity, as I always seem to take them off when using the sharpie. I am also not consistent, but will give it more thought on future builds. Keep the comments coming and thanks again for watching my videos.

@@creationsbycarson you did a good job. Keep up the good work just don’t worry so much. You’ll be alright

I don’t know why I put them on. Haha! Lots of people have made similar comments. I never really thought about it. But I don’t wear them anymore. I did make a video about it. Wearing Gloves Too Much Ep. 29 kzfaq.info/get/bejne/m8yimrZi3KmclqM.html

Thanks for watching and for commenting. Several people have chimed in on the glove wearing. I won’t go down memory lane like I did with the other guy, but you’re right about the blood, sweat, and tears. I put all of that into my builds. There was a time when I kept slipping with the screw driver and stabbing my fingers. It was more annoying than painful. That’s why I definitely wear one glove on my left hand when steadying a screw. I guess I just kept wearing them after that and never gave it much thought. Maybe I won’t wear them on the next build. Thanks again for watching. I hope you enjoyed the build.

Lol! Thanks for commenting. Check out my recent episode titled, Wearing Gloves Too Much.

I screw with just wearing one clove

@@neila484 so did Michael Jackson... apparently

Nice efforts 👌 love ❤from India 🇮🇳 👏

Screwdriver gloves. 😂 Don't forget your helmet.

Thank you for watching and commenting. I never gave that much thought plus I coat everything with that Poly-stain which might not be good for me either. No issues yet. I will take this into consideration on the next build. What wood do you suggest that doesn’t produce an off-gassing potential?

I would suggest any wood for indoor use (with natural colors). Keep in mind that Home Depot refuses to cut chemically treated woods (greenish looking) inside the store, so it shows how potential harmful it can be if breathed in. I also wasn't sure about the strength of the head piece which doesn't have a dedicated support leg toward the front. But in general folding bed is a great idea, perfected by legs of different heights to make it leveled! I enjoyed watching your build process.