Longworth Chuck Type 2-Unboxing and Review by Sam Angelo

No video

Longworth Chuck Type 2-Unboxing and Review by Sam Angelo

Рет қаралды 6,512

6 жыл бұрын

Sam Angelo takes a look at Ron Brown's "Longworth Chuck Type 2" with the Doughnut chuck option.
Sam will show what is inside the box and walk you through the functions for each mode. It is important to know what you will spend your money on for this accessory-Sam shows exactly what you will get. Links to Sam' websites and where you can purchase Ron Browns lathe accessories.
Ron Brown's video on the "Type 2" • Longworth Chuck Type 2...
www.wyomingwood...
goo.gl/D1zkv7 Longworth Type 2 chuck
goo.gl/9hoN4X Original Doughnut Chuck
goo.gl/pUJBY6 Off-center Chuck
goo.gl/itWJXb Chucks and accessories

Пікірлер: 20

@Lostfriar1 6 жыл бұрын

Very cool addition to a lathe. Thanks Sam.

@CLWoodturning 6 жыл бұрын

Great piece of kit.

@tomasarguinzoni9022 6 жыл бұрын

Thank you for sharing great information 👍🏼

@TheWonderboy84 6 жыл бұрын

I just got one of these as well, I'm very pleased with it.

@WYOMINGWOODTURNER 6 жыл бұрын

Thanks, I have a doughnut chuck and the longworth. Very good tools. Sam

@jackwagon4313 2 жыл бұрын

I recieved mine today, but I didn't get all the accessories you have, not even instructions.

@WYOMINGWOODTURNER 2 жыл бұрын

Did you get this from Ron Brown? If you did I can look into it. Sam

@thomasarussellsr 6 жыл бұрын

In the video you had said you were going to put a link, in the description, to Ron Brown's video on this system. I don't see the link in the description for this. Thanks.

@WYOMINGWOODTURNER 6 жыл бұрын

Thanks very much.....I will get that done now. Sam

@WYOMINGWOODTURNER 6 жыл бұрын

kzfaq.info/get/bejne/e86hosuatLC8l4U.html I will also put this link in the description. and thanks again for looking after me. Sam

@mamabearssheshedtracykeato6941 6 жыл бұрын

No offense to you Sam Angelo! I know you don't make them. I really am a big fan of yours! Many blessings!

@tomw5435 6 жыл бұрын

Can you get the 10 inch longworth in a 1 1/4 faceplate? How small of a diameter will the 10 inch longworth close down to? Thx tom...

@WYOMINGWOODTURNER 6 жыл бұрын

Let me check and I will get back to you. Sam

@WYOMINGWOODTURNER 6 жыл бұрын

Tom the 10 Inch comes with a ring that works with a scroll chuck with 2 inch jaws. here is a link. It does not have a faceplate. The page also shows dimensions for expansion and compression for the piece you are working on. I hope this helps. Sam

@thomasarussellsr 6 жыл бұрын

WYOMINGWOODTURNER where's the link?

@WYOMINGWOODTURNER 6 жыл бұрын

Here is a link to the 10" chuck www.ronbrownsbest.com/index.php?route=product/product&path=9&product_id=301

@WYOMINGWOODTURNER 6 жыл бұрын

www.ronbrownsbest.com/index.php?route=product/product&path=9&product_id=301 This is a link to the 10" longworth chuck. isthmus what you were looking for? Sam

@mamabearssheshedtracykeato6941 6 жыл бұрын

The only question I have is why they don't make them for the smaller lathes? Honestly I deal with smaller equipment. But would love the option to do that type of turning on my lathe. I can only turn items 8 in round by 16 long.