LOOK SPD Pedals vs Shimano XT M8100 - X-TRACK Race Quick Review

LOOK SPD Pedals vs Shimano XT M8100 - X-TRACK Race Quick Review - Cleats

Рет қаралды 40,889

Күн бұрын

Look #SPD pedals vs Shimano XT M8100 clipless pedals, better, worse, same? #LOOK #pedals are used by Maxime Marotte, Sam Gaze, and the world champ Loana Lecomte, here are all the details of these pedals next to XT Race, including installation!
➡️Click here to subscribe: - bit.ly/37tescF
For parts and tools please consider using the links below, they help me fund the channel. Thank you for the support!
⭐Shimano OEM parts from Canada
Shimano XT M8120 Trail Clipless SPD - bit.ly/3ImhCja
SHIMANO SM-SH56 Multi-release SPD cleats - bit.ly/3ImhMHi
SHIMANO SM-SH51 SPD Single-release clears - bit.ly/3GSeafP
⭐And in the USA, hit Worldwide Cyclery for some awesome gear! BTW did you know that the Worldwide Cyclery crew provides a discount for signing up to their newsletter?
Shimano XT M8100 Race Clipless SPD Pedals - bit.ly/3Aj9mxJ
Shimano XT M8120 Trail Clipless SPD Pedals - bit.ly/3nHRac4
SPD Clipless Cleats and Pedals - bit.ly/3qOhkM2
Shimano XT M8100 Clipless SPD Pedals - bit.ly/3Aj9mxJ
Shimano XTR M9100 Race - bit.ly/2PDSsmf
Shimano XTR M9120 Trail SPD - bit.ly/2PyAIJ6
Park Tool PH-1.2 P-Handle Hex Set - bit.ly/2QVpKgE
Park Tool Polylube 1000 Grease - bit.ly/2qy34qo
⭐FOLLOW ME on SOCIAL
Instagram - / love.mtb
Twitter - / mevnet
⌚Chapters
0:00 Intro
00:27 LOOK vs Shimano XT SPD
01:15 Cleat compatibility
01:56 LOOK SPD Pedals Specs
02:42 X-Track Race nest to XT
03:44 LOOK pedal construction
05:34 Pedal Adjustments
06:07 LOOK pedals weight
06:33 Installation
07:38 Conclusions
My channel is not sponsored. All opinions are my own, 100% honest. Some of the links in this description are affiliate links. I'll earn a small commission if you make a purchase and it's no additional cost to you, I appreciate your support!

Пікірлер: 70

@MrDistill 2 жыл бұрын

As always, a great information packed video. Thank you!

@waisinglee1509 2 жыл бұрын

Nice overview! I've been using those exact same Look pedals for a year now, road only, almost 10,000 kms. No issues at all with them.

@mashbr 10 ай бұрын

Came over here and decided replacing XT for Look pedals. Great review!

@chuckrodgers4780 2 жыл бұрын

Great review ! I use Look spd ‘s on my mountain and road bikes. The Looks are great and would recommend them .

@manoloman2000 2 жыл бұрын

Como siempre que veo tus vídeos, son muy completos y productivos. Ofreciendo alternativas con detalle. Buen vídeo.

@downbad9066 Жыл бұрын

awesome! i just got the carbon ti version! can’t wait to try them out

@M1keBLR 2 жыл бұрын

One more idea to You. Some pedals without proper bearings consume more power than you can save due to their light weight. There where some tests in the internet. Shimano pedals are really effective in terms of rolling resistance.

@yussanid 5 ай бұрын

1:31 love this feature, multibrand cleat support 🎉

@LoveMTB 5 ай бұрын

Definitely!

@MA-no6id 2 жыл бұрын

Good review. Using LOOK pedals for a while now Excellent Durable Can,t say anything negative about them Love them

@oswaggy 2 жыл бұрын

Great review! I'd like to ask if I may, what do you think are the differences between the M8020 and the newer M8120 pedals? Hoping to see your answer! Thanks... Love from Philippines.

@jasoniannone9675 2 жыл бұрын

I recently replaced a pair of Shimano pedals with the X-Track En-Rage. I'm still using my old cleats. I share your experience in that the Look pedals stay clipped better than the Shimano. I think it's because the Look pedals have more float but I haven't tried to confirm that.

@SoGoMTB 2 жыл бұрын

Clips has come a long way!

@Veterans2009 9 ай бұрын

Thank you, I was looking for details and I found them, for my brompton city bike, I like clip on padels to strength my knee by hitting all muscles when I am riding

@LoveMTB 9 ай бұрын

Right on!

@kisilvan 2 жыл бұрын

Nice to have someone review Look. As an ex roadie I used Look back in the 90s and loved em. I always used shimano on the MTB but have X-Track En rage now for the enduro bike and I really like the float they have and he bulkier platform. I still use shimano spd on the XC bike but now I've seen this review I may take a look at those. Thanks

@PRH123 Жыл бұрын

I had the first generation Look pedals in the late 80's. Great pedals, but the moment Time pedals appeared, everyone went to them, because they had some rotational float, but the Looks didn't.

@kisilvan Жыл бұрын

@@PRH123 yes I ended up with Abbas knee from using the first Feb then the res clear came out and helped. I remember all the pros going to time pedals.

@PRH123 Жыл бұрын

@@kisilvan yup I long thought that riding then for 4-5 years may have had some long term negative impact on the knee, but it ultimately went away…. I just didn’t have enough money then for the Time pedals….

@jeremywatts2768 2 жыл бұрын

Review those Trail Grip flats. Its weird that they're using Vibram vs having the typical shin-dig-pins. It would be nice to have fewer scars even if I'm proud of them.

@cohoonatube 2 жыл бұрын

Thanks for the overview! Switching fully to SPD and use Look Blades on one Roadie, and Shimano XTR's on another... prefer the faster click-in with traffic and walkability of Gravel cleats. Interested in the XTrack series for the larger platform / energy transfer. Would love to see a comparison video with the Look En-Rage series.

@rodrigomacion9023 Жыл бұрын

sir.its true thats your shimano xt m8100 is fake because no bar code on the pedals?thanks

@antoinedupre6634 2 жыл бұрын

Is the larger platform useful? In the end of the video, we can see that the outer side of the shoe is not even on it!

@mrsith1402 Жыл бұрын

I have the Look pedals for 3 months. The cleats are very hard to unclip, changed to Shimano cleats and they are much better. The biggest issue is hitting my ankles on the cranks and even chain stay 3mm does not sound much but I have the bruises to prove it does on some bikes. So I have decided to go back to Shimano.

@LoveMTB Жыл бұрын

Thanks for sharing your experience!

@boxofspace Жыл бұрын

I've used these pedals for 2 seasons, and several crashes, and they work great. The only downside is that the bearings don't rotate as smoothly as they used to, but after abusing them for 3k miles - that shouldn't be a surprise.

@boybakalismyname4515 2 жыл бұрын

Can i suggest, next video for bike tools?

@interceptor7905 2 жыл бұрын

Never tired of Shimano stuff,always works

@MrBirdshell666 2 жыл бұрын

i ve changed all shimano spds (540 and 980) on both my bikes for race and race carbon. look just work better for some reason (easier engagement and less accidental disengagements), with shimano and look cleats. and yes, axle length does matter - i had to use shims with my lake winter boots

@adrianlimkb 2 жыл бұрын

Have been using this for quite a while,2 years maybe,and no more looking back. I am interested to try d HT M1 pedals next if any chance.

@adrianlimkb 2 жыл бұрын

@@LoveMTB Nice,looking forward to see then...

@Je-Welds 2 жыл бұрын

Been using LOOK pedals for 3 yrs now Carbon Ti very good pedals

@marekzmazur2077 2 жыл бұрын

I switched to HT pedals last year because I wanted more retention. They are a game changer. They hold so tight but easy to snap out of. At 300g for the pair I can't complain about the weight either.

@marekzmazur2077 2 жыл бұрын

@@LoveMTB oh I think he is. I actually have a spare set if you want to give them a spin to compare.

@theadventurebiker 2 жыл бұрын

Nice review! Being a longtime Shimano user, I wasn't even aware that Look had pedals like this. Honestly however a carbon body MTB pedal sounds like a bad idea - all it might take is one or two good hard rock strikes on the trail and these might end up shattered into pieces, given the rather brittle nature of carbon composites.

@diehardbikes Жыл бұрын

First off, Time has a pedal that has been carbon for much longer than Look, and they are actually known as some of the most reliable pedals out there. Second, I have a set of these pedals, 3 of them actually. One set I have raced very hard in the elite category in Cyclocross and mountain biking all over the Northwestern part of America. In all weather conditions, in many temperatures, and in all ground types. Never had an issue with the Looks. However, I used to race Shimano XTR 9100s. I switched to Look after a particularly icy race that my XTRs froze up on me in and the looks that I was experimenting with took over and performed much better for much longer in frozen temps. Ive struck these pedals against rocks, curbs, playstructures, roots, dirt, gravel, everything you can imagine. They just are bombproof. I cant say the same for my XTRs which folded on me on one side once when I took a 9 foot drop in Washington. A pin broke.

@janvanrookhuijzen8309 Жыл бұрын

I have a set of older model look carbon ti pedals. The carbon seems to last for ever.

@kevinborovsky3558 2 жыл бұрын

Hey there I have an off topic here question. As you know I'm building a Prone (L) frame. I just watched your video on chain line sizing, and now confused. I ordered a m7120 crank set, and I have a bottom bracket width of 73mm. Question will the crankset work, and do I still need a 2.5 washer when I install the bottom bracket as crank set came with 2 3mm washers?? Will my chain line be so far off with the M7120?? Thanks as always

@kevinborovsky3558 2 жыл бұрын

@@LoveMTB I was thinking that as well about only 2.5 on drive side. That may fix it. Thanks as always for your help

@lisabeck3963 2 жыл бұрын

Nice - thanks for the intro to LOOK pedals. I've drifted so far from road biking I forgot all about LOOK as a brand. Will try some for my next set. I wanted to ask a question about brakes. I bought a set of brakes (MEROCA 2 piston mineral oil) for a spare bike I was putting together. Simple cheap and cheerful brakes. The bike turned out to be so good, I've used it a lot and in less than 4 months worn out the pads. I never paused to think when buying the brakes that finding replacement pads would be an issue. I cannot find any information online to tell me where I can obtain MEROCA pads, or which Shimano pads to use. Replacing the rear pads while on an away trip at a bike shop, they simply popped in new pads and away I went happy as Larry, but I failed to learn which pads they used. Silly me. Would you know? Or, perhaps it could be a useful video subject for a later time. As the MEROCA brakes are otherwise fantastic, I'm sure there are many more people wondering where they can get new pads. Please let me know if you're reading this and have the answer. Thank you :-)

@lisabeck3963 2 жыл бұрын

@@LoveMTB I'll get a set and let you know :-) Thanks for your reply

@syazwanabdull4835 2 жыл бұрын

For newbie want to use cleat which is the best and easy

@JogBird 2 жыл бұрын

I use spd for my road bike because of the walkability and also clip sandals only come in spd... Nowadays there are road bike shoes w spd, like the giro empires

@NH61975 2 жыл бұрын

I use this pedals for a while, i like them more compare to Shimano XT, because the plataform is way bigger, make the sensation of power transfer better and smooth..........they are very good pedals.

@bobbigrant9158 Жыл бұрын

Must Have

@Jacob99174 2 жыл бұрын

Wouldn’t mind exploring, but it ain’t broken, so sticking with Shimano and just waiting for availability.

@marcelopradostudios2719 Жыл бұрын

Otimo video eu comprei este pedal ontem estava em black friday, ele serve com os tacos shimano ne? São tão bons quanto o M520? Eu ja uso um tem quase 18 rs

@marcelopradostudios2719 Жыл бұрын

Perfeito!!! Comprei os pneus Rekon Race 2,35 TR o pneu bom 🤌🏽🤌🏽🤌🏽

@GFClocked 2 жыл бұрын

I've bought some crankbrother mallet e LS + their own shoe that's meant to go with the pedals and tested for a whole season.. It just can't beat the beat up (bought used) xtr m9100 with a random set of cheap spd shoes. That satisfying click and knowing you're either clipped or unclipped is unbeatable. In contrast eggbeaters seem vague and not reassuring in their clip mechanism, I've even had them unclip in the middle of a downhill, and even though it's adjustable - they're already setup as good as you can get out of the gate, as it's meant to go together. Meanwhile I've never had that happen with shimano even at low-medium setting, not to mention you can adjust that on the fly! I've upgraded the shoes to specialized rekon for stiffer carbon sole, but the pedals and spd system is so godlike I can't believe it's unchanged for like 3 decades, spd came out before I was even born! They really did nail it out of the gate with this one. The only advantage crank system has over the spd sh51 (that I've used) is in the crashes it ejects you away from the bike better, but most likely sh56 would do that also.

@GFClocked 2 жыл бұрын

@@LoveMTB I'll be honest, I've been using them for trail riding. And even though it says "e" for enduro, they are perfectly fine for trail riding. No more weight than any other trail spd pedal either, I was surprised - after seeing their beefy construction. I'm sure they'd survive nuclear war. theyre still good pedals - Wide platform for even and big area for shoe contact, the platform feels very good - no pressure spots unlike what I had with spd (but that is probably from flexible shoe base). And the unclipping is super easy for when the terrain is iffy, that's on the default cleats. I've bought some ez cleats from crankbros too, but never even needed to test them, as default was already super easy. The Q factor is great for trail riding too, as they offer long spindle version. What I didn't like was that instead of pressing in shoe vertically, you kinda have to 'slide into' the mechanism, more horizontally - very much a dislike for me. And also its vague, as there's no audible click it lacks the reassurance of spd for me, even though I know I'm clicked, it just isn't the same. I guess it kinda stems from the fact that I find them too easy to unclip, and unlike spd where a hex tool can adjust on the fly - you need to mess around with cleat spacers, but I think I'm already without spacers on the mallet shoes and its still too easy. On shimano I kept using lowest spring force and it was never a problem. Not sure about marketing though, im from Lithuania and I've never seen any ads for them here, I just know Jeff from WWC, and all the guys at VitalMTB use them, so I tried my hand at it.

@ThunderStruckMTB 2 жыл бұрын

I'm a 100% flats rider and still watched the whole video!

@danzaokid 9 ай бұрын

3:00 Shimano comes with spacers 1mm to mount their cleats if needed.

@mcsweeneys3383 2 жыл бұрын

Shimano has the best Clipless MTB Pedals in my Opinion. I find the PDM 540s are hard to beat. I am currently on Xpedo MForce 8 Pedals with Steel Axles, they are not bad, but the longevity of the bearings is nothing to brag about and the action is also not comparable to Shimano. I also have a pair of old XTR 747, they are undestroyable...

@diyonoputra99official51 2 жыл бұрын

Nice

@raresale889 2 жыл бұрын

The conclusion that you got is the most imp. to me because with shimano xt pedals and sh51 i got to mutch float ,and 1 part of the pedal even alows free play on vertical axis which is so bad and anoying on everythink.Do you had the same think?

@raresale889 2 жыл бұрын

@@LoveMTB ok... So you observed LOOK has somehow a smaller amount of pedal float?

@raresale889 2 жыл бұрын

@@LoveMTB yes, they are shimano ,both cleats and pedals.. But somehow maybe the vertical movement has connection with the angle of my ankle and foot,couse i go a little like a duck.Othervise ,as i observed the connection between cleats and SPD ,could just be manufacturing mistakes. I do not have any idea what else could be.

@nicolasbozzo2364 2 жыл бұрын

I hit the ground or rocks with my pedals pretty often. Idk if that carbon body will be able to withstand the abuse.

@fchacla 2 жыл бұрын

I hit my pedals too. My XT pedals still doing well after 4 years of abuse. I don't thik carbon pedals will last the same.

@fchacla 2 жыл бұрын

@@LoveMTB Great video review!. Thanks for let us know about new products.

@rogerio5752 Жыл бұрын

LOOK incredible brand......top mind!!!!

@taingkhimlymeng7d525 8 ай бұрын

Can we use shimano cleat pad on look pedal

@LoveMTB 8 ай бұрын

Yes!

@Ruben.C.C. 2 жыл бұрын

Excelente vídeo; felicidades. Yo me quedo con shimano XT, y mejor el XTR.

@DadDoingStuff 2 жыл бұрын

The carbon “Looks” cool, but…..I want to see what shape they are in after 10-15yrs. The XT pedal is just bulletproof. They will outlast every maintain bike you will ever own. I’m skeptical that the Look will have the same long-term durability. Good info, nice video!

@edwinbeltran2677 2 жыл бұрын

Same thoughts, i have seen a lot of look pedals that have the same bearing problems even their hi End Keo 2 max... Shimano pedals are bomb Proof! i used to own an older low end version of Shimano been using it for more than 4 years without any maintenance for its price its hard to beat!

@Van.Mironov 2 жыл бұрын

Hi! Not sure why are you tired from shimano spd... But,... After 3 (or 4) seasons same XT pedals are fine in heavy CC (boots are surely not, will go to trash) and still have some original grease in it. And XTs surely forgive me a ton of scratches by rocks, roots and road ) They not so good for jumps, it is true... Well, I moved to trail/enduro fs last year, learning to fly, you know. Flats are better for that. Thank you for video, will keep them in mind. From Russia with love.. to MTB)))