What an amazing experience meeting Diesel Creak, Andrew Camararta and all the other KZfaqrs in the US. 👍

Some of JCB's best videos are yours Mucka. I bet Lord Bamford won't be impressed that his staff have dropped the ball so badly

Yes ofc. we would like to see a video with the Wheel Horse 👌👌

I know you can get the Wheel Horse running 👍 much respect ✊

Bring on the wheel horse.

The Case extended back hoe makes it very versatile on a site . Looks a great work horse. It would be great if you did a series on the little tractor. Well done Mucker 👍 🔧 🚜

That's an operators machine. I've only ever used an older one, and im always on 360s now but that is quite a weapon.

Yes to the Wheel Horse please.👍

When I managed acres of amenity grounds maintenance we use to run dozens of Wheelhorse ride on mowers and found them to be a reliable bits of kit,so yes please let’s see yours up and running.

Apart from the dipper arm,thats a New Holland LB110, in my humble opinion,the best wheel digger on the market

Of course we want to see you get the old mini tractor goin!💪 Fancy case backhoe, with sideshift on the rear digger😮 you hardly get any backhoe's over, it's just al diggers. Keep it up M'lod! Cheers, Mike

Greetings from Mississippi, USA !!! Great job as usual & as far as the Wheel Horse ... WHY NOT ?!!! Give it a go on that BEAUTIFUL piece of kit !!! 🇬🇧🇺🇸👍

Looks like a manufactor has listened to the boots in the mud (😂) at last, very impressive piece of kit. Great to see the u.s. vids as well oh go on give that wheel horse some tlc...

I enjoyed the tour of this backhoe! Case is my favorite brand of heavy equipment; I would love to have my own Case backhoe on my own homestead one day. I am aiming to become a heavy equipment operator...I discovered my love of the trades after working in a factory. Keep up the good work, much love from the USA. By the way I loved the bit at 17:13 ! 😂😂❤🇺🇸🇬🇧🇨🇦🚜

Wheel horse yes please.

Thank you. Nice piece of kit. Good to see a proper bash plate on a digger arm, especially with two fixings on each side instead of two on the face. The side shift is a brilliant arrangement. I agree with Kurt on the radio placement. Nothing worse than electric/electronic controls that are designed to collect every piece of crap-and drop of moisture-in creation. Upward-facing door-mounted electric window controls in modern trucks are a classic example of that type of stupidity.

Great vid, have a go at the wheel horse. I'm sure Matt could give input on any problems with it.

Wheel horse yes would love too see you working on it thinking of getting 1 myself 1 day

Go for it! Yes let the Wheel Horse live!

I had the same with JCB no answer to phone emails so I purchased the case 590st from Warwick Ward brilliant company to deal with, love the machine !!

Absolutely sold me, what a beautiful piece of kit😍❤️👍🏻 & definitely shine that wheel horse up please let’s see it!👍🏻👍🏻

Back about 2000-01 I worked a job where we had a Case 590K and a JCB 214 Sitemaster?? I liked the Cab on the JCB, even though the AC was totally useless, but the 590K had more balls digging. At that time JCB dealers were fairly sparse in the US.Seems like the closest one was 160 miles away and anything beyond filters and hydraulic fittings had to be ordered in from a long ways away. the Case, well like you mentioned, they are everywhere here.

Yes please. Get the Wheelhorse running. When I worked for Cowies Eastern tractors, we had one in the second hand sales shed. I used to start it up just to hear it ticking over, what a great sound. Thank you for another interesting video

I have watched Diesel Creek for years. Now I watch and enjoy your channel. Yes, I would like to see you get the Wheel Horse going.

That Case was a very nice bit of kit 👍🏻 and yes, get that wheel horse running please. Stay well 👌🏻

Looks like JCB has got a competitor, that Case looks amazing. And, yeah, let’s get the Wheel Horse running. Great to see you with one of my favourites, Matt at Diesel Creek. 🔧👍🇬🇧

Great video friend thank you and yes please would like to see the wee wheel horse tractor out and working again keep the great videos coming friend from Scotland 😊

I noticed the same thing. I think NYC has more backhoes then all the USA 😂 They are everywhere !! I loved our Case backhoes but now I have a Cat 416 and it seems to out work our case . I still will always love Case though ❤

Yeah absolutely would want to see you getting the old Wheel Horse going👍

I had a 580g which was called in on a job where a grey cab turbo 3cx was stuck…. Case sailed through no problem.. then had a 580k, it would outpush a Loadal 570.30 from around 2011… !, brilliant backhoes

Really nice bit of kit, like the extentable section on the back hoe, ideal if you need that little bit of extra reach. When I was younger every construction site had one of these, normally a Ford though. Hopefully with what Case have done, they're will be a resurgence. Glad the cab had approval from the most important person. 👍😎

Get it up and running. Wheelhorses are a great little mowers.

Yes please, have a go at the Wheelhorse, be good to see that running

Yes,lets see a will it start on the WH

Still think jcb are always gonna have the edge until other manufacturers start putting the servos on the seat, our seat can be live all the time after a small alteration and it makes it so much more versatile again, good video anyways, look a good strong machine anyways , gonna have to sign up to this patreon as well, missing out 😆

Yes get her going

Yes I would like to see the wheel horse going.

As an owner of a ‘68 Massey Ferguson MF10 garden tractor, I’d love to see some more of the Wheel Horse on the channel

Always fancied having a day or 2 on a backhoe as I’ve done plenty of hours on a loader and a 360 but nothing that’s combined 😁. I’ve never got the wheel horse idea but wanna learn 👌👍

Yes please do the wheelhorse thanks

Yes get the wheel horse going

Oh yes wheelhouse please, they make “automatic “ one with just a long lever forward or reverse, used to drive it most weekends when I was still at school 😊👍

Excellent video mucker that case is an awesome bit of kit would be good to see the wheel horse running 👍🏻

Great video Kurt 👌 JCB perhaps have adopted the attitude of many very successful firms and just expect everyone to fall at their feet 🤔 the old saying how the mighty can fall an that Case was a superb machine 💪💪 as for the wheelhorse they are a very capable little tractor one of our club members has 5 or 6 the largest being a 22hp Vtwin Hydro but the C120 he has can pull a Ransomes TS41 single furrow trailing plough , they may be belt drive but the transmission is a very well built mechanical gearbox 💪 would be an interesting video 👌

Love the logo on your hat

Mucker I personally love a will it start. The old steel wheeled deer is one of my favourites it show’s things where just built better back int day

The Wheel Horse would be a nice video.

Good luck with the Wee Wheel-horse, it looks very good for its age.😊

Thanks for a lovely welcome and hospitality yesterday had a great time could not have asked for more

Great video Kurt, Thanks. And thanks for sharing your trip to Diesel Creek, really enjoyed it. Wheel Horse? Definitely. It's different so why not?

This is THE MOST ENJOYABLE Tour (Sales Pitch) I have ever seen! Case really thought of (today's version of) Everything! I wonder if JCB will enjoy this as much as I did...

I'd LOVE to see a revival on the Wheel Horse. They're great little tractors with a huge following over here in the States. 😁👍

Yes I would love to see you get the wheel horse running

Nice Case machine yeah give the old wheel horse a go.👍

Great video, I have to say that case is a smart machine....

Yes get the Wheel Horse going

Get that Wheel Horse up and running, i need it for my green HA HA.

Definitely get her going ... it’s something that many people can relate to 👍

Did you try it in digger mode or swinger mode? buggered if I can drive it in anything other than swinger mode, put a couple of dinosaur sticks in the middle and I'm fine but not servo's 🤣

In US. I’ve never seen American made backhaul with a side shift on the back. I remember seeing them in the caterpillar parts book, but never seen one here the only one I did see was a JCB backhoe, and it was probably 35 years old here in Fairbanks Alaska. Good video thank you.

Great video and love to see the Wheel Horse being work on to see if it runs

Yes have a go at getting the wheel horse going

Great stuff Kurt, Hayden and Puppo, yes please, if anyone can get it to run its Your good self, My Uncle had a 580G and Ithink an F before it , years ago, He liked them, mainly used for loading muck,have a good week👌👍🙏🙂

Great video as always. Case definitely upped there game 👍 be great to see you sort the wheel horse 👍

Yes I'd like to see you get the mower going , you're always interesting and informative as well as funny in a place or two 😂

I was given a wheel horse some years ago, I did sell it. I think I have still got the manual some where.

Great video on the new case. Beautiful machine! I’d love to see you work on getting the wheel horse going

It’s a pity a British Company couldn’t or wouldn’t reply to you. but the Case does look a seriously good bit of kit. And yet another very interesting video 👍👍

Yes definatly lovely little garden tractor brother in law had two and showed them

Great video, case backhoe great machine, all over the streets in Boston too ! Yes on wheel horse. Enjoyed watching. 👍🏼👍🏼

Love to see anything you put up.

Hi Mucker. I take it it’s the JCB dealer not the manufacturer you are talking about. Briggs here in Orlando don’t seem to be putting many JCB machines out in this area. In my opinion there are two reasons behind the poor support. Dealers represent many manufacturers now with overlaps on same types of machines, favoring who ever is offering the best % commission from month to month, and many manufacturers have such a large portfolio of machines such as JCB. Yes they have more avenues of revenue but it’s impossible to be head of the class in all categories. In Britain for sure the loader backhoe market changed with the introduction of mini 360 diggers. The reasons for this are for another day, but the fore runner to the change was the POWERFAB 125W 125WT and the 125WTD prior to their tracked 180C and and 1200 360 tracked machine back in the 80s. Now the mini digger market is flooded with many manufacturers including JCB in many weight classes. I hope you get a demo off JCB and others and put two of your choice head to head with demo drivers and yourself at the controls as if you were actually buying a new loader backhoe. Let them work for the sale. 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿🇺🇸

Yes- wheel horse

Looks a great bit of kit great videos as always

Good machine , always liked the Case diggers and tractors. Hey that wheel horse would be an interesting video and they are a good little mower . All the best mucker ,look forward to your next video.

Definitely do the wheelhorse - I got an old 416-8 about 4 years ago in preference to a new tin and plastic item. Nice solid American iron. I love it.

Great video Mucka!! Get that wheel horse going Corse we want to see it!!

I think JCB have some serious competition. Looking forward to the next video.

Yes please get it running

I think you should have a go with the wheelhorse as they are great little machines

Nice machine Mucker enjoyed video with you at Diesel Creek as well👍😊🚜

Yeah get the wheel horse going if you think you can handle it lol. Case looks great, keen to see some of the 695's turning up here.

Brilliant video as always, thanks. Would be great to see the Wheel Horse running. 👍

Love how we have the front loader and the rear boom setup for UK use parallel lift for the front same as a jcb I remember seeing a brand new construction king basically the same setup as u just tested but 98s model

Well done! Great video. Definitely a video on the wheel horse. I spent a lot of time on a wheel horse mowing when I was a kid…

I enjoyed your visit to the states Mate ,and you hanging with some of our top Muckers here ,Matt from Diesel Creek ,Chris from Lets dig18 , Mike and Arron from Dirt perfect ,and Clint from C&C equipment it was great seeing you and Kimberly ,always great seeing Kimberly. that was a great video like to see more of you this side of the pond .

Keep the videos coming please Mucker. Just seen your live feed and wanted you to know that you have a lot of support.

Hi Kurt Nice one looks a well made digger Wheel horse be something Have a good week thanks again

Great review of the Case. I’m currently looking to upgrade from my Cat 428C and was dead set on a 3CX. The Case seems to be a real contender though.

yes please get the wheel horse going😀😀

yes you wont regret it might have trouble getting kholer parts

YES Definatley get the wheel horse going!

great video i used to drive a 580g years back great digger in there day yes get the horse running!!!!!!!!!!!!!!! 👍

Lord Bamford take note ! Nice one Lord Muck. Wheel Horse yes please

Simple answer yes yes and more yes . Good to see something different

Those old Wheel Horse garden tractors are well built machines. I would like to see you have a go at it.

Lovely little wheel horse, be good to see you a tiny tractor! Cheers

😍 looks fantastic

Yes get the old wheelhorse running

Case well made Mucker. First Garden Tractor I had was a Wheelhorse 706. Great little machine until the metal moth did for the deck. I put a few pics of it in August 2011 Tractor & Machinery.