He cleaned the vacuum. Thus, becoming a Vacuum cleaner himself.

This is the best video I could have asked for! No frills, no music, no “erm” every 5 seconds. Much appreciated!

Thank you for your clear and precise instructions. At 88 years old I learnt how to remove, clean and put back together my Dyson V10 animal. Last weekend after watching your video, I removed my very old Dyson DC8, cleaned washed all the parts except the paper gasket in the Radix and put them together. The suction is like nine years ago when I bought it. Having been a DIY addict all my life it was easy to listen to your instructions and absorb them. If you are not a DIY enthusiast it is advisable to watch and listen but let an expert look after your expensive equipment.

Thank you for the detaild video. I dump the bin in my V11 outside to keep dust out of the house. When I wash the filter, I dry it in front of a small fan and its completely dry in 12 hours. I've discovered a really simple way to thuroughly clean the inside of the vaccum without disassembling it, using an electric leaf blower. Again outside, remove the dust bin and rear filter. Blow off the fitter (you still should wash the filter occasionally) and blow out the dust bin and the red gasket area that seals to the vacuum body. Next blow out the vacuum body. Point the blower directly at the perforated metal on the vacuum body and blow out the dust and alternate with blowing air directly into the end of the body (where the tube and brushes attach) and then direct the blower air into the back of the vacuum where the filter attaches, to blow through the vacuum. Do this several times. It creates an enormous dust cloud, so make sure no nearby windows are open. I also blow out the vacuum metal tube and floor soft roller and rug brush and scrape out any dirt that does not blow off. Its probably a good idea to wash off the roller and floor brush after blowwing off. Compressed air with an air nozzel should work well for this too. Just don't set the pressure crazy high.

When you put the screws back in, to make sure they go back into the spiral cut they made when they were put in originally, and do not cut a new spiral, gently push the screw home, then rotate it anticlockwise (backwards) until you feel, or hear a slight click. Now screw clockwise and the screw should go in very easily as it has found the original groove. This works anywhere that self tapping style screws have been put in plastic holes, and helps ensure that multiple uses do not tear out the hole and in effect, strip the thread out. I was taught this by a NASA engineer, Gordon Plews while discussing disassembling Roomba robot vacuums.

Thank you so much for taking the time to create and share this video! I personally feel that while Dyson makes some great products, they don't take enough time to provide customer support for how to maintain these beautiful appliances.

Out of all of the Dyson maintenance videos I found on YT, yours was the only one I found that explained how to clean out the inside of the machine! That's what ultimately solved my pulsation issue! Well done and thank you!

So far so good with this vacuum. kzfaq.infoUgkx8ISPQRRAfpAaX4msGjyodObTBnlj4T5g I was a little concerned to find it seems to be all plastic, but the reviews were good, so I'm hoping for the best. Very easy to assemble Recommened, and only attachments I've used so far work well, and are easy to use. Doing a good job on the new carpet in my bedrooms and stairs. Works well on the hardwood on my main floor too. Reasonable weight and cord length. I already knew from an earlier review that it wouldn't fit under furniture, but I can use my Eufy for that, so no problem - the high traffic areas that need a stronger suction was really what I bought this for. If it continues as it's started, it will be a good buy and well worth the money. I have had two Shark Rocket stick vacs in the past that are super easy to use, but the motors just don't last well, even with scrupulous cleaning of the filters. I'm hoping for better with this Bissell.

SO THANKFUL I came across this video!!! I had no idea my dyson could or should be cleaned like this...I'm embarrassed to say I've had my dyson for 2 years YIKES and has never been cleaned like this...So I cleaned mine along with you and I Thank You so much for your video.

You have no idea how much this video helped me when I got my Dyson. Now I deep clean my Dyson V10 about every 6 months. I actually go as far as taking the rubber gaskets off to get all the nasty dirt out and use an air compressor to blow all the dust out of the main part. Thank you so much! If anyone is worried about putting it back together, just take a couple of photo's so you remember where everything goes. :)

Great video! One thing that has made the world of difference is emptying the vacuum every time I use it.

Clear instructions and straight to the point. Thanks for your effort in making the video!

What a wonderfully comprehensive tutorial on cleaning out the Dyson stick. I had a pulsating vacuum and didn't know what to do. I went through all the steps here, and the Dyson stick works wonderfully well again ! And it looks like a brand new unit too !

So much more helpful than the Dyson filter cleaning video from their official channel. Thanks so much.

Thank you! My sister has been trying to figure out how to remove the bin so we can clean it. Good thing this vid popped up.

One of the best product maintenance videos I’ve seen

I thought I had broken the bin! This video has saved me going to the supplier. MANY THANKS. It is the best video tutorial I have come across: clear and easy to follow.

Very helpful and the commentary was paced at a speed that I could follow along with the cleaning steps!

A simple man, simple video, simple explanation. All yotubers should come for a lesson here!

This was the most relaxing cleaning tutorial I’ve ever seen. Extremely helpful too. Thanks :)

Wow, I never knew how to take the bin off. Low and behold there was a sock stuck inside. Great video, solved my problem

Thank you for your great video. I’m an older woman and I was able to follow your instructions and clean my vac and put it back together. Thank you soooo much

Thanks so very much for sharing via KZfaq. I clean my Dyson v10 animal after each use. I dump the debris into a grocery bag inside my trash can. I also tie it up so the dust won’t go into the air. I never disassembled it like it was done in this video. I also was not aware of replacing the battery. It is one f the best cleaning tools I ever purchased. I mainly purchased to vacuum my vehicles to Abe money at car washes. I also thought of aging changes and how it come with various attachments. Using it as a handheld or with the long handle makes it perfect for many needs and purposes. I am 66 years, three months and 14 days as of my comments. I had mine for over four years. Best investment in vacuums. Thanks for reading my comments. Smiles

That was brilliantly done really pleased that someone else thinks that the Dyson needs more cleaning than they state on their website, I take mine to pieces but did not dare tell them as it is frowned upon for some reason but if not they can begin to smell especially when you have dogs, so thank you for showing everyone this

Excellent video. Mine keeps flashing for a blockage but did not realise that I could unscrew it to clean better. My machine was full of a fine dust and powder. My machine is 2 years old and I have cleaned the filter regularly. Thank you.

Another superb video from you. I was widowed a while ago and miss my husband's know how on the DIY front. This has given me a bit more confidence to get "down & dirty" with this necessary job.

Really helpful, thank you, nice calm voice, showing in simple instructions everything without presuming people know what to do

Great tutorial to improve the performance of the Dyson v11 animal. Your organizational behavior is impeccable. Great job.

Thanks so much for such clear instructions. Mine is just about a yr old and has lost its appetite for dirt. A good cleaning and now it’s a dirt hungry animal again!

What a great video to show someone who just bought the Dyson v10. thank you so much.

Thank you for the clear and comprehensive instructions. Extremely useful 😊

Very nice, detailed video - thanks very much. I like to clean mine after each use. The only drawback - and this is 2022 and I've just got the Cyclone V10, is that I liked the older version (I forget the model number) better as far as cleaning it. That model you are able to take apart and rinse out all the parts without unscrewing anything. The model had the larger filter. The filter and battery lasted me over 5 years of appx 2x weekly use. I left it in my previous home for the new homeowners as it was nicely installed in the laundry room.

Just bought the dyson v10 Cyclone Absolute,put it on the second setting,did my 2 bedroom flat,hallway,bathroom,kitchen,no problem absolutely love it.

I just did that on my son's V10, and I used compressed air. Amazing how much other fine dust came out with the compressed air. I recommend doing the cleaning outside so you do not have the inside mess to clean up.

Excellent video very clearly explained how to give a thorough cleaning to a very good Dyson V10 model. The dust does build up if you neglect it for a long time.👍👍

Thanks for up loading a clear tutorial. I found mine had a massive build up of fibres in the square cyclone aperture found on the right hand side in the metal mesh. Getting on for 2.5m views well done.

And all this time I thought I was cleaning my Dyson. Very thorough thanks for the video

Thanks worked perfectly after cleaning. I appreciate the time taken to produce this guide.

Hello, I am so glad I watched your video. I replaced an older model the other day and upgrade to the Dyson V10. I now see what went wrong with my previous model and may not had needed to upgrade [under warranty-Geek Squad], after watching the video. Yours is a must watch video for ALL Dyson vacuum cleaning owners. I have now saved this video and will share it with others, like my sisters who want to buy one, one day soon. You were GREAT! and I will return to this video to make sure I keep my Dyson V10 at it maximum working compacity in a month. :-)

Hello! I know this is an old video but I searched it when my Dyson started cutting out. Turned out the filter needed a clean. You saved me money - thank you. Cheeky little rinse did the trick! :)

What a useful video and the commentator has such a clear, relaxing manner. He ought to do relaxation videos. Thank you.

One of the family has vacuumed something very bad that was wet and now it stinks whenever its running, so this video was so useful and showing the battery replacement also very useful Thanks so much.

Excellent video. The man did a good job showing how to take Dyson Vacuum attachments apart and clean the them.

An excellent demo as it shows how to replace everything after cleaning it. Every time my vacuum pulses I take my V10 apart and there is usually a pile of fluff coming out of the hole on the cylinder barrel. I was surprised there was none in your vacuum.

Thank you so much, excellent video , I was having trouble cleaning it, but after watching this video I have a better understanding how to take care of my new Dyson v10

Great and very explanatory video. However I am so tired of deep cleaning my vacuums that next time I will opt for the old-fashioned devices with the disposable bags.

When opening the "main compartment", a plastic bag can be handy to help minimize the "dust cloud"... if you've got a vacuum with a *bag* , or a whole-house vacuum (we just moved to a place with one; love it) , you can use one vacuum to clean the canister, and that will get most of it... you can just slide the cylinder down, without "popping it open" , and put your *other vacuum's* nozzle in the hole... suck out most of it, *then* pop it open to complete. A shop-vac could also be used. I realize *eventually* , you're going to have to empty something nasty (whole house vac, shop vac, etc.) , but this approach helps minimize those "episodes". Thanks for the video! Nice shirt.

You saved my life! Pet waste bags roll's plastic tube was stuck inside the vacuum. I was able to remove it, now the vacuum is working just fine without any interruption. Thank you very much!!!! - from U.S.A.

Thank you, a very clear video, easy to follow and no woffle or irritating music.

Very easy video to follow. Dyson should watch this and get pointers!

Thank you so much for your clear instructions, this is THE ONLY helpful video on KZfaq on how to really deep clean the filter.

Excellent instructions. Simple, concise, so glad I bought this machine!

Yours is the first 'How To' clip I've watched. Really good. No need to look at another. Thanks

Great session! I love how modular the Dyson v10 is, thanks for the great instructions.

Thank you so much! My filter light came on and I had no idea how to clean everything internally, you have possibly saved me a repair bill! Truly thank you!!!

One of the best videos I've seen in a long while, fully serviced my V10 with easy, well done.

Very helpful, many thanks. I bought mine two weeks ago; I love it.

Very comprehensive. Easy to undertand. Thks for your time. Great job!

Excellent video demonstration. Thanks for the help! Now I need to go back and review it to see what "special" screwdriver is needed

Excellent explanation and demonstration. I was confused prior to watching it!! Thank you.

Amazing instructional video. Thanks so much. My v10 looks like new again, thanks to you. In cleaning the brush assembly, I did a great amount of digging with qtips around the base of the rotational element (where it attaches to the side of the plastic case) and I got a large amount of built-up dirt out of there.

Thank you so much the clear and concise instructions on how to disassemble and reassemble the Dyson 10!! So very helpful and the closeup helps a great deal.

Thank you so much for your extremely helpful video. Saved me having to get someone to service the machine and it's working again fantastic. Appreciate you taking the time to share the video and how to do it. Darren ( from Australia )

Excellent. Clear, concise, to the point. Very useful. Thanks.

Thank you . Clear and concise instructions. Well done.

Great video! Very helpful!! Most important part for me, to take off the screws. I did not know how to get rid of the dirt after taking off the bin. Thank you so much!!!

Thank you. We’ve had a v10 for about 8 months now and I really need to give it a clean. This was very helpful.

That was so easy to understand…many thanks for your detailed instructions….much appreciated. Was in dire straits as lost my instruction book and had forgotten how to clean it properly so thanks again. Well done🙏🏿🙏🏿👍

This has to be the best instructional video on vacuum maintenance that I have ever seen. Thank you so much! I've been waiting to have my kitchen floor fixed and in the meantime the white gypsum type stuff that is under the linoleum gets everywhere. Sweeping just throws it all up in the air so I've been using my cordless with good results. But when I try to use it I get the flashing hose icon indicating a blockage. I've washed the filter, which in the past has been effective. I've removed the canister and washed that and I've looked inside and there is absolutely no blockage. So I can only think that the fine powder stuff is clogging up the inside of the vacuum. I just need some Torex Bits to finish my maintenance.

Thank your very much for taking the time to make and share this very helpful video.

I just bought Dyson cyclone V10, worth every penny. This video would be helpful to clean up my new vacuum. Thanks a lot for the details. God bless. 😊

You’re explanation is so clear that It gave me the confidence to clean my v10 on my own. However, I think I would not venture into unscrewing as this is way beyond my capabilities. But thanks so much!

Well done!! This makes my life a whole lot easier! Dyson should have these kinds of instructions with their machines.

This is the ONLY video you need to take care of your V10!! Thank you!

You are brilliant mate. Your instructions are so simple, straightforward and easy to follow. 😊

Great vid very concise instructions, I already new how to do all this apart from taking out the four screws, so nice to learn something new, next time I clean it I will follow that line, already got the screwdriver, thanks for the size. The first Dyson I bought was the DC 4 and I kept that for six years before I up graded. When I got the DC 18 slim my wife started to strip down the canister and cyclone and washed them and hung them out to dry on the washing line. 😁😁 I still have the DC 18 slim a great machine still going strong to this day.

👌👍👏, Thank You for this video amazing great we will be buying one in a week we can't wait Ill be following all of what you did.

Thank you for the video it was very helpful. I have found that the slide to empty is a bit stiff so it was good to know that is normal. I will keep this link handy so that I can refer to it when necessary. I am pleased with the vacuum cleaner so far.

Thank you so much for your extremely helpful videos. I’ve watched a few of them to help me get to know my new Dyson and yours are the ones I have been watching the most. They’re very helpful. Thanks.

I’ve had my Dyson for years and never deep cleaned it. Thank you so much for this detailed video.

You have been so helpful in teaching me how to maintain an excellent performance from my Dyson 10 Animal vacuum. I really appreciate it. I love this vacuum cleaner. It is the best I have ever owned. Now I will be able to keep and use it for a very long time thanks to you.

Great video; very clear and easy to follow. Didn't know you could pull the battery. That is a good thing given the decay that occurs in batteries over time. Too bad Dyson doesn't make that a snap off design and so you could have a second battery charging.

Thanks so much for your amazing, supportive and absolutely so amazing video… I have a vac that is has been block in ages and it’s such a relief to have it working again

Everytime I come to clean/service the V10 I always forget and everytime your video comes to my rescue! +1 like!

Excellent video clear instructions if you find it difficult to strip down the main body if you have a local tire car tyre repair shop you could ask them to use their air pressure to blow it through that will get rid of the majority of the dust you’ll find most people are helpful.

Thank You, excellent demo on maintenance and cleaning.

Really clear instructions particularly how to put the bin off and on making sure to slide it under the red pusher...Kudos and thank you so much !😊

Absolutely great and simple way if cleaning Dyson.Bravo!!

Great video, very instructional and easy to follow.

Great asmr video lol, I thought I was the only one who took my vacuums apparrt to clean them. I do complete tear downs as I like to tinker. Another thing to use if you have it is an air compressor or a can of compressed air to blow everything out.

Omg I had no idea about the little switch. I’ve had my Dyson for years. I kept trying to get on there with a cloth 😂 thank you so much

thanks very much mate, it's pretty helpful. Stay safe during these troubled times....

Thank you for this really helpful video, have just cleaned mine! :)

Excellent instructive video including 2 or 3 aspects I was unaware of. Grateful thanks.

Very clear and concise description of how to clean the Dyson 10. Thank you!

Such a gentle and delicate touch. Here's me blasting away with hot water blast and steam gun. Great instruction video.

Brilliant help and thank you for your great work!

Wonderful cleaning instructions for the Dyson stick vac. Thx for sharing.

GOD BLESS YOU! I watched so MANY videos before finally finding your's. SO helpful!

Great video… especially the inside part of the filter where you take the 4 screws out. The amount of dirt in there after 1 year is unreal 👍👍