Galthain Thanks brother for watching. I've ran this on 4s but it was before our channel. I'll try to get some footage soon.

@Bob Veitch Amazing truck!

@Bob Veitch Oh no this is the gasoline RTR version not the nitro. They released this and the LST gasoline version same year. Folks had issues with the engine and both were discontinued. Check out the link if you get a chance. www.horizonhobby.com/product/1-8-8ight-t-4wd-gas-truggy-rtr-with-avc-technology/LOS04001.html?gclid=Cj0KCQjwtMCKBhDAARIsAG-2Eu-toV5XT-HbvjY97Uwvzev10AIH23eTKzTigEmLEEwy9drw4cyyhT0aAulfEALw_wcB

@powerROBY Unfortunately I do not own a 8ight but surprised if the stock electric body will not fit with a 4S pack. Must be a pretty large pack. I know the Arrma Typhon body may have that extra clearance but not sure if it would fit exactly on this chassis.

Fetusbakon69 Fetusbakon69 This is the Losi 8ight-T 3.0 platform. Good luck on the conversion you are going to like it.

Garett Bodel Reverse is set from the ESC. Mine has reverse. This conversion kit from Losi is a direct fit. No diffs need to be swapped out when converting to electric.

You do have to spin the nitro differential around 180°. In order for the motor mount and stuff to fit

And you will have to shim it up about a 16th of an inch if you use your nitro's differential gear it is larger than what comes with the kit but you cannot disassemble this differential

@McFly Sorry no part number. I even checked his site he no longer has them listed. You may want to contact him directly to see if he still machines them out. www.sumo-racing.com/contact_us.html

Mcfly did yoi ever figure out what to do for the spacers?

@@jeremybreeden4228 Nope, I sold my Losi and now running a tekno ET48.3 😎

Lol yeah i have a tekno mt410 jist got this losi as a project im nust concerned about the spacer thing i know everything else will work cause i jist did a nitro losi t to brushless but idk if this gas version is different the nitro didnt need the spacer

@@jeremybreeden4228 When i ask for the spacer it realy was by curiosity becaus my losi was an electric one. But i sold it realy fast not because it was bad but i realy wanted a ET48.3 et voila 😁

Red Irish Thanks for watching. The parts are listing in the description with the links. The center diff does not need to be turned around.

Ready Set RC u have pic of ur set up please

Hello u have pic of your setup I have the same truggy I have a kit not sure what I'm doing wrong

Red Irish Let me know what you are having an issue with. Are you using the spur gear that came with the gasoline setup? If you use the center diff lift on the second link it will fit with no issues. If you are using the spur gear that came with the kit that should work as well but I wanted to use the metal spur gear.

Ready Set RC u have a Facebook

@Ed Haspadura Yeah this was not a popular model so not too many videos on the truck. You can use the stock diff and spur but you need to lift the center diff mount. The guy I bought mine from is no longer doing them. It was 4 years ago. But you need to find a way to prop the mount up then you can use the metal spur. If you are on IG I can send you a better pic of mine.

Aside from electronics i mean

Im having trouble finding the diff spacers for the center. Is this a must have for the conversion to work?

@Jeremy Breeden That is correct, conversion kit and the diff spacer. This was some time ago but I feel the diff spacer was if you want to keep the metal spur than the plastic one that comes in the conversion kit. For me the metal was a must. That spacer was limited when I did this conversion too.

@Sarge Scum I'll go one further, it was a flop. Didn't work in the LST either.

@Allen Traylor I agree, tuning is part of the hobby. This was one of those gas failures by Losi. I bought it off eBay as a roller. Not sure if that whining could put me to sleep though😊