Losi DBXL-E 2.0 New XLX2 1100kv Motor Combo Installation Video see how I do it here

No video

Losi DBXL-E 2.0 New XLX2 1100kv Motor Combo Installation Video see how I do it here

Рет қаралды 8,380

Earl Moorhead

Күн бұрын

Пікірлер: 63

@dodgymtbknee 2 жыл бұрын

I don't even own any of the vehicles you work on but its always a pleasure to sit and watch the talk through of what you do. Thats the only way I can apply locktite, spill it on the table first :D

@earlmoorhead5555 2 жыл бұрын

🔥💯💯👍

@Blueknight1960 2 жыл бұрын

Just installed the xlx2 in my dbxl-e 2.0 on Monday. Ran it for about 15 mins Tuesday and no problems. Planned on running it today for a full run but, the negative connector came off on the esc. When I say came off the esc, I mean the connection on the board in the esc. According to the logs today, it only pulled 344.3 amps. I'm going to send it in for warranty work/replacement but it could take up to 2.5 months before I get it back, if then. The tech also told me the xlx2 isn't supposed run with that high of an amp draw but yet castle was testing with over 500 amp draws. The ripple did go up right when the wire was coming unsoldered. The temp went to 100.8F. As of right now, I'm not impressed with castle.

@whatsintheboxx 2 жыл бұрын

Got the 800kv castle with the mamba x, motor and esc stay cold. Great video 👍👍

@thercog 2 жыл бұрын

That’s going to be my next RC

@calvinjacobs7908 2 жыл бұрын

Still watching and I still love that intro!!!

@michaelvankirk3576 2 жыл бұрын

I love getting your videos first thing in the morning gives me something to watch so thank you 🤪👊👍💯

@rcguygarage 2 жыл бұрын

Sounds like your kids are killing each other in the background🤣😂

@earlmoorhead5555 2 жыл бұрын

They might have but I’m not looking 😜😜😜

@whatsintheboxx 2 жыл бұрын

@@earlmoorhead5555 if ur not looking, nothing happens we use to say 😂👍

@carlosvelazquez4649 2 жыл бұрын

Another awesome and informative video, thanks for sharing the knowledge and greetings from Allentown Pennsylvania.

@dblackinf Жыл бұрын

ALLENTOWN!! We might’ve grown up together💯

@jameslyons1978 2 жыл бұрын

Nice one Earl, I'm gonna get back into some larger builds now after over a year of crawlers. DBXLe interests me so does the XLX2 system as I'm building a baja 5b right now. ✌

@earlmoorhead5555 2 жыл бұрын

Nice I did watch you 5 B roller looks like a cool build can’t wait to see whatcha do with it 💪💪

@jameslyons1978 2 жыл бұрын

@@earlmoorhead5555 thanks, gonna try and keep it light, not over build it with machined alloy and stick an XLX2 combo or MGM 400 combo in there. The latter might be a little too overkill but you know me 🤪

@earlmoorhead5555 2 жыл бұрын

Yes over power works for me to 😜😜💯💯🔥🔥

@davidcorbit3931 2 жыл бұрын

I have the same motor in mine and it rarely gets hot plus you got the gamechanger fans. Wow your in for a huge difference. I really like all the accessories that you've added, I'm interested in seeing some more on that crazy servo.. great job. Sorry Earl I did get you build confused with exocaged rc, he is doing something similar with the XLX2 11k ... none the less I still like your build and builds.

@cboyajian79 2 жыл бұрын

game changer fans? who makes them?

@soundmindtv2911 2 жыл бұрын

@@cboyajian79 that’s the brand - Game Changer (GCRC) 👍

@jdodds1023 2 жыл бұрын

have the 800kv XLX2 combo in DBXLE. Getting this one in my new hoBao Vte2 1/7th. gonna be very very exciting.

@Bluecuban71 2 жыл бұрын

Great video 👍 Love watching your videos 💯👋

@jamesgeorge609 2 жыл бұрын

EARL.... that’s a heavy motor,,,do you think some sort of rear support at the rear of the motor will benefit it from flexing under hard landings,,,just an observation on my part....🇺🇸👈🚘 great build....👍

@earlmoorhead5555 2 жыл бұрын

The Losi has a built in support for a coke can motor already its has a padded strap for the back of the motor on the chassis Losi quality 👍👍💯💯💯

@jamesgeorge609 2 жыл бұрын

EARL....I didn’t realize that,,,,just thought I’d bring it up,,,hate to see any issues with your build......great stuff 🇺🇸👈🚘

@adamx9987 2 жыл бұрын

Thanks for the video. I been really interested in this vehicle. How well has the chassis held up for you? Has it had any bending? I'm not a hard basher but would like to race it around a large track we have. Thanks for your time!

@rcguygarage 2 жыл бұрын

🤣🤣🤣😂 throwing some ARRMA loctite on that there screw😉

@earlmoorhead5555 2 жыл бұрын

Yes keep them in the holes for sure 😜💯💯

@joshchatwin8569 2 жыл бұрын

Wish they was that cheap in uk for that combo over is 580 uk pounds 760 dollars

@jdodds1023 2 жыл бұрын

Earl - really important - REALLY IMPORTANT. switch to either 8mm bullets or preferably QS8 connectors right away. Those Xt90s will be a major bottleneck and bad hot things can happen. Be well and do have a Very Merry XMAS!!

@earlmoorhead5555 2 жыл бұрын

It’s been switched for awhile after the last refresh 👍🔥🔥

@maine-p-racing4674 Жыл бұрын

I’m running 6s and trying to do over and hundred or close to it in 134 yards

@lifeofdave1237 2 жыл бұрын

Looks good that earl 👌 nice n neat 👍 that things a beast 🤣

@stokesrcs 2 жыл бұрын

awesome video!

@soundmindtv2911 2 жыл бұрын

Thinking of going to a Castle in my NO Prep. Its a Tekin RS pro right now.

@giopirmisashvili5514 Жыл бұрын

❤

@clintkent9860 2 жыл бұрын

Nice one earl 😎

@joshchatwin8569 2 жыл бұрын

For my 1/5 scale kraton exb

@_savageasfck_ Жыл бұрын

Luv the vids Earl.. Question: Are the dimensions on both bodies for the dbxl-e the same? I'd luv to run a 2.0 with a ver 1 body

@earlmoorhead5555 Жыл бұрын

Yes body and cage would have to be replaced

@ahwayzcool4630 2 жыл бұрын

I've been running this xlx2 setup for about a year. Yesterday I did a esc calibration and now I can't get reverse WITH braking working. It was working before and now its not. Strange.

@earlmoorhead5555 2 жыл бұрын

Need to check castle link and see if there is a reverse signal or is it in track mode that removes reverse 🤔

@ahwayzcool4630 2 жыл бұрын

@@earlmoorhead5555 ok thanks. I'll check

@jlo96f3 2 жыл бұрын

So to get a base rpm is it kv x voltage= RPM?

@easty6615 2 жыл бұрын

Are you worried about it melting you’re entire buggy into a smouldering heap 🔥?? Or is that older XLX2’s?

@Blueknight1960 2 жыл бұрын

That is one of the things that keep me from buying a castle xlx2, worried it'll catch fire. The other thing is my brother got a castle system (esc and motor) for his kraton 6s. The 1st motor broke a shaft (running on flat ground) and the 2nd one locked up. The esc wasn't any better. It was replaced with the warranty and it didn't last. He now has a max 6 esc and hobbywing motor, so far, so good. Another thing castle does that I don't like is they use a slide switch, I like the push button switches. I have the max 5 but it's on it's last legs. Looking to replace the esc with either a r-snake flier 400a or save up for an mgm esc ( very expensive ).

@blacksheeprc8113 2 жыл бұрын

I want one so bad

@turonewyley9858 2 жыл бұрын

Great video once again!! What's a good castle system to replace the stock Maxx system??🤔🤔

@maine-p-racing4674 Жыл бұрын

Is that castle motor good for high speeds or is the horizon a good one for the high speeds

@earlmoorhead5555 Жыл бұрын

Motor is a motor the magnet used will be stronger or not so strong all motor will perform different even the same brands sometimes

@bachirbattache2997 2 жыл бұрын

1100kv is perfect for it 👍

@SIRICKO 2 жыл бұрын

800 all day.

@whatsintheboxx 2 жыл бұрын

800kv for me 💪

@gamechangerrc4633 2 жыл бұрын

Looks great 👊👊💯💯

@kevinmagiera9157 2 жыл бұрын

What’s that? 🧐 so please correct me if I‘m wrong but wasn’t it the steering that‘s really bad on the 2.0? Is it going to be a speedrunner in the future? Full trottle but just straight forward? So center differential makes sense but why don’t you first fix the steering? That xlx2 1100 would have been great for the limitless giveaway 😉