Lotus Elan rear caliper locking wire

No video

Lotus Elan rear caliper locking wire

Рет қаралды 2,005

Paul H

Күн бұрын

How to fit the locking wire to the rear brake caliper fixing bolts

Пікірлер: 11

@mikemccarthy1398 2 жыл бұрын

nice job

@PaulH_S2_Elan 2 жыл бұрын

Thank you :)

@frankhoward7645 4 жыл бұрын

I couldn't stop staring at the caliper and hub. Even the yellow e-brake spring! Way nicer that when it left the factory!

@KevinMeeds 2 жыл бұрын

Thanks Paul, very informative, where did you get the banjo set up to replace the brake pipe?

@PaulH_S2_Elan 2 жыл бұрын

Hi Kevin, I got the banjo and banjo bolt from Paul Matty Sports Cars. I remember I had to swap one of the banjo because the thread for the hose wasn't deep enough. They swapped it for me without any problems.

@KevinMeeds 2 жыл бұрын

@@PaulH_S2_Elan Thank you Paul.

@EmilyHaaaiiigh 4 жыл бұрын

Nice work!!

@Sentosaman 2 жыл бұрын

All that effort and the brake hoses are plain rubber! Why not use SS braided hoses to prevent potential brake failure?

@PaulH_S2_Elan 2 жыл бұрын

With the type of use I don't expect to have a problem with the standard brake hoses. I'll also be inspect them regularly. I've never had a problem with standard brake hoses on any of the cars I've owned. Of course braided stainless hoses would be make sense to add a bit more security.

@robbey300 2 жыл бұрын

@@PaulH_S2_Elan - I had the regular brake hose fail in my EType (very scary and life threatening) and from then always invest a few pounds more in the SS braided ones. I did I enjoy the video as these banjo bolts need to be correctly wired!

@PaulH_S2_Elan 2 жыл бұрын

Blimey, very scary. I've been very careful to make sure the brake hoses aren't rubbing on any other parts or bodywork, with the full suspension movement. I'd certainly recommend braided hoses if that couldn't be guaranteed.