Awesome man i'm glad to hear that. Its always a good day when you can save some money.

Yo... My new blade came, I put it on a couple days ago & now it sounds quiet as when I first bought it last July 2020. It didn’t start getting loud until maybe this past April 2021. But...will I have to buy a new blade every time it gets loud??? The new blade works though! Thanks guy

@@cbbpsilk Hey CBreeze, awesome i'm glad that blade replacement worked! I think you pretty much have to replace the blade whenever it starts getting loud. I will definitly update the video if babyliss ends up selling those ceramic pieces. That would be a cheap fix.

@@siivanti Ok then, fasho!

Any luck?

Please where can i get this bro?

Nice, I have not run into that yet but I will start checking that bracket.

Have you found a way to fix the bracket? I’m having the same issue with my clipper!

@@Lovecod913 Hey apologies for the late reply. I ended up replacing the lever with the spare they had in the box and that seemed to fix the noise somehow? I think it was the tiny washer that sits between the screw holding the lever in. I may have lost it taking it apart and that somehow made enough of a gap for vibrations and noise.

Where can I just buy just the cam follower without buying a new blade

Hello Felix, thanks for the comment. What I would probably do first is take the blade off, clean it out really good and put it back together. Its possible that the screws are loose. Another thing to check is the blade adjustment lever on the side. If that is loose, the blade will also wiggle. Too much tension and the blade will be really hard to adjust, you want to have kind of a medium tension on that screw.

It's not really at bulk more of a fading clipper

If you want to change blades, just keep the original white cam follower in place and just replace the metal top and bottom blade.

Bend the spring that goes on the blade until its even

Lol. If it's within the 2yr warranty period I would just send it in. Could try some super glue but that would void any warranty.

@@siivanti I will give it a shot. Thanks!

I've tried a couple ways to fix the snags but replacing the blade is your best option. Basically the blades are not sitting completely flat on top of each other.

Not that I know of, unless they sell that cam follower by itself some day.

@@siivanti Ok then, thanks for at least letting us know the reason for them getting loud. If you come across something better, let us know nigh

@@cbbpsilk I hope you see this message. YOU HAVE TO BUY OSTER GEAR LUBE. Put it on the inside of that plastic piece. 👍

@@prodigalson1 Aye I’ll try it out, thanks ✊🏽

I see a lot of barbers using Andis oil on all the machines they own. All manufacturers make high quality oil to protect these machines so I would guess they are all ok

Same. Dont know the issue though. They started getting loud after 1 cut or im just tripping

@@Nate-hw1oe maybe we're both tripping lol Andi's cool care seems to sort them out for 1 cut but I can't keep going through cans of cool care each week 😂 could be the cam follower but I don't feel like getting new blades just to get a new cam follower for a issue that might not even be there 🤷‍♂️

I've noticed some with and some without - seems like the manufacturer started adding these foam inserts at some point. They are pretty difficult to clean, if you have a good method please share!

We just take the foam piece out.

Yeah me too, I think some country does come with it and some country doesn't, I'm from Australia and it doesn't come with com follower

Hey Eloy, that was a good idea switching them out. I would check the little pin that sits on top of the motor, sometimes that can be loose. Also check the motor to see if its loose. They should both be really tight and not wiggle at all. Also, just to double check yourself, get a brand new blade and put it on the loud one. If it doesnt work, at least you will have backup blade.

Hey Pepa, do you know what piece it is? Babyliss is pretty limited on what repair parts they sell. I do not believe they sell any replacement parts except for the blade assembly.

@@siivanti i would send you a photo.. could you hit me up on ig? @saykin_alex

@@siivanti it is the part into which the screws are screwed to the blade

Thats a new one, is the lever loose? Try tightening the screw holding the lever on. Don't overtighten or it will be really hard to move.

@@siivanti I’ve tried cleaning it I’ve tried tightening it it doesn’t work and I can’t get a replacement lever and I definitely don’t want to buy a new clipper it does stay in the first slot when the clipper is on it stays in the last 4 but the first slot it’s goes to the second one when the clipper is turned kn

Lock (tension) washer is bent.