You made me laugh so hard when you blurred out your feet while laying on bed frame. 🤣💕
@CornishGeriАй бұрын
Maybe his feet are for only fans 🤣 Brilliant video Shaun. Loving this build 😊
@jspfifeКүн бұрын
Just a wee thought about the sliding bed. My father in law was an old cabinet maker and if there was a bare wood to wood surface that rubbed together, he would take a candle and scribble over both surfaces. Reduced friction greatly. Might help with the “butter smooth” finish you’re looking for…and won’t bust the budget! Great job on your van.
@twist_of_the_wristАй бұрын
For a budget build, it's really turning out to be a nice-looking van.
@AM.000Ай бұрын
😂😂😂 never seen this channel before, I lost it when the foot blur happened! Good job on the bed/couch!
@LoveSundaysАй бұрын
I save the uncensored version for my OnlyVans members 😂
@gedofgont1006Ай бұрын
Is your nickname Verruca Joe? 😊
@LoveSundaysАй бұрын
@@gedofgont1006 😂
@moe_1886Ай бұрын
Title might say it's a budget build, but I tell you what, it doesn't look it! Great work Shaun! 😎
@dianesang8428Ай бұрын
Make finger hole opening for doors. Simple and free x
@richardbirch4475Ай бұрын
i ve personally really enjoyed the budget build series, they are going to help me when i convert my van 😊
@red9zeroАй бұрын
Your Dad does some excellent work. You should hire him out !
@andrewhughes6568Ай бұрын
Building a slideout bed for mine soon. Great to hear you troubleshooting issues with your previous builds. Saved me a few headaches, thanks! Hope everything goes well with the baby 👍
@littledevilchris6665 күн бұрын
I’ve just put a deposit on a van finally, can’t wait to pick it up, been a fan of your channel for quite a while. Just decided last few weeks that I need to start living a bit more.
@LoveSundays5 күн бұрын
Ideal mate enjoy every minute
@littledevilchris6665 күн бұрын
@@LoveSundays that’s the plan, once it’s insulated and carpeted il Chuck a mattress in the back until my funds have replenished , then do somthing like this. As this works well for taking the bikes with us.
@LoveSundays5 күн бұрын
@littledevilchris666 what van did you get?
@littledevilchris6665 күн бұрын
@@LoveSundays I was really after a transporter, but in the end I went with a transit custom with 4 years warranty thrown in as was concerned about the wet belt.
@daviddunsby5577Ай бұрын
Looking great Shaun, congratulations to you both with the news of another baby on the way. 🎉
@diwarburton5369Ай бұрын
You make everything look so simple and also explaining each step of the way.
@SilverwidowsАй бұрын
Found your channel yesterday. Looks like i found it at a good time, i was sad that I'd have to wait for episode 4 😂
@adamwharmby4864Ай бұрын
Congrats on the news of Ur baby girl I just watched Ur other vid been loving this build it's been so helpful for ideas on my 1st build so thank you
@craigtaylor-creativetechno2557Ай бұрын
amazing, cant wait for pt 5
@AndrewSandilands-tk6stАй бұрын
It’s amazing what you can do in such a small space isn’t it. Great work.
@MattyCleavyАй бұрын
This vid couldn't have come at a better time mate looking at restarting the conversation i have inherited when buying my van. Cheers for this Shaun 🔥
@williamcosgrove1558Ай бұрын
Great build so far, looking forward to Part 5.
@stevetaylor1687Ай бұрын
Love watching the new van conversion. Looking forward to next week.
@Stoffe46Ай бұрын
Good and nice work👍🏻 I would chosen sliding doors with holes for handle. But everyone is different 😃
@helenellis8367Ай бұрын
Doing a grand job with the camper
@UndercoverDog-j5tАй бұрын
We have a similar design but the bottom cupboard has a sliding door so there is still access when the bed is out. We have supported the bed as we hire it out and you never know how heavy the people are !! Nice video i would suggest a mirror when u are decorating , it add to the feeling of space plus who doesnt need a mirror !! Great Video our build came in just under 4K but we resprayed the van as well x
@carolannison999Ай бұрын
Doing really well 😊 loving watching this build. Can't wait for part 5 😊
@MrBigMalTАй бұрын
I subscribed a while back when I was helping my nephew convert a van. Sadly he ran out of money to keep her on the road, but I’m still subscribed as I love your videos 😊. Bed looks cool… if you ever do another, I wonder if rather than drilling through the ply, so your jigsaw can make straight cuts, could you literally shape them like round fingers, so it could be one continuos cut, for an even smoother aesthetic 😊
@23toxic23Ай бұрын
Great build. But I was screaming out "Where's your wood glue? Arrrrh🤣🤣🤣
@LoveSundaysАй бұрын
It only gets glued once I’m happy it all works. Once the cushions are fitted and I know no other alterations need to be made I then glue it all together.
@jonstephens682Ай бұрын
Well done shaun. That van is amazing mate looking really good, and we got a little Camino for Batman ( your dad ) 😂😂😂😂😂😂
@DaznEm525Ай бұрын
That pull out bed build looks great, I think cutting the ply out rather than slats looks alot more sleek and tidy. You've done a brilliant job so far, loving the vids ❤xx
@maddog19671967Ай бұрын
lovin your channel just one thing ye should use some glue on the wood as it will be much stronger espically when traveling , keep up the good work shaun !!
@kezzathewynnАй бұрын
Great little series Shaun . Very inspiring.
@user-qw4cg1tc7iАй бұрын
When scribing just use cardboard, then can cut easily with scissors rather than jig-sawing another piece of off-cut wood. If you 'over-cut' an area, then just tape/stick/staple some more cardboard back on and have another go.
@siroyal2040Ай бұрын
Wow coming along great 🎉🎉🎉
@w7565Ай бұрын
Looks very tidy Shaun. Coming together very nicely. Good work!👍
@vinceWHUFCАй бұрын
Morning Shaun. Hope all ok. Thanks for another great vid. Congratulations to you all for the news of your new baby.
@BagofRustАй бұрын
Your flying through this 🙌 I've only just managed to fit my radiator, water pump and Intercooler. I still need to kit out the back and fit solar panels and inverter.
@karenrn5607Ай бұрын
Great job!!! ❤
@davekitchener9092Ай бұрын
Very nice mate .well done ✔️
@DeliciouslyBrunoАй бұрын
This is awesome. In the process of re converting our T4 and this was super useful. Especially the bed idea.
@mrsmunchinАй бұрын
Will be sharing this with my hubby. We have a motorhome, but want a small night out or two getting away van too.
@tamzinmenadue4887Ай бұрын
For the doors ...drill finger holes, easy to open and cheap....would it have been possible to make sliding doors ? That way you could access the cupboard easily Great build, i'm really enjoying it
@mondotv4216Ай бұрын
Good build so far. Probably consider putting in a stopper for the bed so you don't accidentally pull it out too far and maybe round the corners on the top of the cupboard so you don't catch your hip on it.
@ftrider1768Ай бұрын
That's brilliant, love that pull out bed, definitely going to do that with my van 👌
@wheelzmediaKINGSLYNNАй бұрын
Roll up door on kitchen unit would be a idea
@dayvanadventureАй бұрын
Massive help! I'm planning on redoing the Caddy interior soon (possibly tomorrow!) so this is nicely timed! Good work :)
@brianbennett8294Ай бұрын
Thanks
@connorlake4675Ай бұрын
This series is looking like its going to cost me .... Going to look at a van tomorrow 😅. Thanks for the videos, they are very descriptive and well presented. Looking forward to part 5.
@stevencranswick3242Ай бұрын
Loving these videos 👍🏻 going to rewatch and make notes and a budget plan. Keep them coming 😊
@wrightfamily4373Ай бұрын
Great content for handles I just drill off circular hole across the four corners that meet on the doors make a little area. You can just pull each door open accordingly would look rather nifty and you wouldn’t be getting caught on things as you walk past it and at no cost
@nemoscamperadventures7563Ай бұрын
Great video mate. Again, learnt a lot from you as non of that is my trade but picked up some good hints and tips. Brilliant
@ismayevans3560Ай бұрын
Congratulations on the baby news!
@bmwofboganville456Ай бұрын
I would do that bed design and install a couple of drawers underneath using simple runners. Your method looks easier than cutting up a load of slats.
@lorrainesveganallotment887Ай бұрын
I built a full height kitchen in mine. It has a drop down table on the top half. It was a real faff to build though. I made it with a frame and then clad the outside faces. There's not a straight line anywhere but it holds loads of stuff. Yours looks much neater.
@rhyssimms591Ай бұрын
I wouldn’t paint the wood, just varnish it, looks nice and fresh👌🏼
@jimmythejock4376Ай бұрын
Handles for the doors. May I suggest Cotton strap like material? Save your legs getting bashed on something solid. Ruth Aisling put leather straps.
@stephentvideos492Ай бұрын
I wouldn’t put any handles on your doors I would use push to release catch then you have nothing stuck out to catch on 😊. Great job so far loving the build.
@tomwinch9107Ай бұрын
Excellent progress - that bed looks really good - with some great ideas that you make so easy to understand! The kitchen unit was neat too. If you don't need a catch to hold the doors closed when driving, I've used the kind of 'catch' that you push the door in and it springs the door out so you can open it (then the next push closes the door). I'm not sure how well they will work in a van (I have them in my kitchen at home, which thankfully doesn't move!
@mywildadventures88Ай бұрын
It has been amazing watching you build this, some skill that mate 👍
@karengodfrey6183Ай бұрын
Looking good young man. You really doing a great job of this van conversion. Proper job 😂😂
@paulkirkman734Ай бұрын
Cool, looking good!
@DarrenBooth-ub8lnАй бұрын
Amazing to watch it coming together looking good you could try the push to open on your unit doors as it looks good without handles love watching
@groundhog1143Ай бұрын
awsome video Shawn loving the build
@bramaltingАй бұрын
for an budget build looks great. i wanna buy one van in couple months1 love it. for camping and fishing(A)
@lottie2525Ай бұрын
Love how you're making everything in a way that anyone can copy with basic skills and tools. And if they can't you pointed out some great options online that aren't horrendously expensive to buy. Is there a reason you chose not to do sliding doors on the cabinet? Then you wouldn't have the problem of opening the cabinet when the bed is out. I would've liked to see how you do that. Maybe in your next build. 😝
@markjwilcoxАй бұрын
Maybe you could have built or bought tambour doors for the cupboard to get full access to the cupboard even when the bed is fully out. Anyway, you're doing an extremely good job with the fit and finish of a "Budget" camper. Also, congratulations to you and yours for the news of your little girl.
@musicalmarionАй бұрын
(But I'd have done sliding doors on the cabinet)
@leighmarshman3522Ай бұрын
Your dad must be good he uses Makita tools 😂😂
@fijikimboАй бұрын
This is the video I needed 👌🏻👍🏻 🛏️ thanks for this
@SuperDebbie001Ай бұрын
Loved the bed you done a great job … you did make us giggle with blurring out your feet 😂😂😂😂 wish you would wear better footwear when you’re working.. worries me your drop something on your feet 😂 anyway keep up the great videos we .. love Sundays x
@summertime3773Ай бұрын
You cracked me up when you blurred out ur feet 🤣also congrats on ur baby girl. Another amazing vid
@denisemorgan6004Ай бұрын
Congratulations to you all, love your channel and look forward to Sunday video as I’ve just purchased my first van and in the process of my build,(also a Vauxhall vivaro ) was wondering if your van is a Swb? So I can use your measurements,keep up the good work some great tips and advice.
@kevgandy7855Ай бұрын
You could look at getting your wood from IKEA, not sure if you've got a local one , but they're always putting panels out which could be upcycled to suit your needs and save you some cash . I know it's not ideal really because it can be weight restrictions but you could get some bits you'd save a bit of Dosh...cheers
@russelledwards8997Ай бұрын
Great job
@leeanalyАй бұрын
It looks stunning! 👍👍👍 what’s the song at 10 minutes 40seconds, it’s going to look ace when it’s done,,,👍
@mikebailey2509Ай бұрын
Looking good 👍
@seanbrown..brownsbuildings1424Ай бұрын
Great work 👌
@fishinthedream7868Ай бұрын
Thanks really informative 👍🏾
@RubyStar82Ай бұрын
Goodday, This is so wel done, thank you for sharing! For the kitchen door handels, leather straps? Or "clicker", you push on it and it opens? Looking forward till the cushions, curious also if you doing the sewing parts yourself? Curtains, cushions, other things. Thank you for sharing, have a good week!
@theJackWiseАй бұрын
Great vids...keep em coming!
@danereeves7174Ай бұрын
I work in a builders merchants on the yard people ask me for prices but I can never tell them becuase the prices aren’t the prices we like to look after much cheaper don’t be afraid to haggle😂
@stephendixon3498Ай бұрын
Love it !
@chrissyfowler5909Ай бұрын
Hi, regarding the handles for the cupboard doors?- how about soft leather handles? Very popular and trendy atm. Ideal without the added problem of handles sticking out and catching things on them. X
@stevebrown6665Ай бұрын
Probably better quality than B&Q too Probably better using a router than a jig saw to provide clearance if it wasn’t a budget build
@LoveSundaysАй бұрын
Yes that’s what my dad said also. I just don’t have a router and I figured most other people wouldn’t either. It’s fine doing a budget build but if you’re using tools most people won’t have it because less doable for most
@overtonlАй бұрын
Thanks for protecting us from the feet😂
@LoveSundaysАй бұрын
They get so dirty when working in flip flops
@glendahillАй бұрын
Have you thought about sliding doors rather than doors that open out? Then you will still have access when the bed is out
@Dark-Lord3386Ай бұрын
Top tip- ask for trade discount when building building materials or vehicle parts etc. You always get money off
@steven-adamskiАй бұрын
So cool
@henrywilliam8506Ай бұрын
Another great vlog! When sliding wood together like the bed. After sanding, use beeswax which stops it from grabbing. Did you consider building sliding doors for your cabinet, so they can be opened when the bed is extended?
@mrjones2009Ай бұрын
That's the nuts for 2 grand magnetic push locks for the doors no handles
@ricky450fАй бұрын
Looks really nice, I wonder if the plywood look good in Matt black raptor paint, with lots of lighting so not too dark
@thepoolman2528Ай бұрын
If we need to make that kitchen unit.......ask for Sean's dad lol
@biggusdiggus3337Ай бұрын
If you had made sliding doors on the cabinet you would not have had a problem , still good though
@bunnybasherukАй бұрын
Looking great Shaun, it seems to have deffo inherited some of your dads woodworking skills. Got to ask why did you blank your feet out?
@ballygarranАй бұрын
You’ll be surprised how the cushions will distribute the weight applied to the bed or even when seated.
@jeff5951Ай бұрын
Hello Mate! Had you thought about installing 2 x sliding doors on the kitchen unit? You can open them easier
@charlieaddyАй бұрын
I might have missed it, but is the top ply the same material as the upright? It looks like a nicer finish. Amazing work on what was supposed to be budget!
@BluejuiceT4Ай бұрын
You need some t shirts made up...'Before anyone says...!'
@LoveSundaysАй бұрын
I’ve got t-shirts on my website lovesundays.uk
@lanners86Ай бұрын
What about a roller door for the cupboard then you can still use it with the bed out
@ScotNomadАй бұрын
6ft or maybe 5.9. That is a big diffebce for me as I like to stretch out. At 5.11 the shorter is a non starter.
@LoveSundaysАй бұрын
This is the shortest wheel base of this van though. If you went for a MWB or LWB you fit a much bigger bed in it
@ScotNomadАй бұрын
@@LoveSundays Brilliant. Excellent videos.
@dog11222Ай бұрын
Nice job, how about making the cupboard doors bi fold so they can be used when the bed is open? just a thought
@m7spiАй бұрын
You will get this cheaper still if you go to a local independant timber merchant.