Absolutely amazing tutorial! showed me what i needed to do and how to do it without any extra bs or sponsors. Thank you so much for this genuinely a huge help did this in the autozone parking lot in 5 minutes :)
@classicrewind271511 ай бұрын
Glad that the video helped. All the best
@mira962910 ай бұрын
After looking at several videos, I decided to take it to the Jeep dealership, I just didn't want to deal with it. The mechanic told the service advisor that the bulb was not replaceable and they would need to replace the headlight assembly, quoted me $875 + tax. This was on a Saturday and apparently they only had one mechanic on.....I went to Auto zone, purchased the bulb for $24, followed your video and did it myself. It wasn't easy and I got some scrapes on my hands in the process, but I got it done. Needless to say, I'm going to give the service manager a piece of my mind tomorrow morning. Thanks for the great how to video!
@classicrewind271510 ай бұрын
I am so glad that my video helped you. Tell the manager to have his technician check out my channel. Maybe they'll learn going forward how to change a light bulb. LOL All the best..
@prof.m.abbas839 ай бұрын
This kind of robbery should really be illegal
@howardtheduck7807 ай бұрын
The dealership told me to drop the car off and pick it the next day. I was not impressed at how unreasonable and just plain ridiculous that was. Well, the video did the trick. Only a few scratches.
@RobertBrawner-t2nАй бұрын
I got quoted $450 for labor at the jeep dealership after attempting to do it myself from 2 other videos. This video was awesome. Thank you so much for saving me time and money, I got it done in less than an hour.
@classicrewind2715Ай бұрын
Awesome!! I'm glad that my video helped...
@mangamak5 ай бұрын
I just did this on the passenger side of my 2020 Grand Cherokee ! I got quotes by the dealership $275 for labor to remove the bumper to change the headlight low beam bulb about 2 weeks ago. I found your video an hour ago and thought “he made it seem so easy. I think I can do it too.” Followed along with the video, took like 30 minutes to twist the bulb out, scraped my arm, took a few minutes to insert the bulb and wires back into the headlight, and I was done! I am so proud of myself! I’d usually ask my dad for help but he can’t physically assist because of medical issues and there was no one else but me. Thank you for posting this video!!
@classicrewind27155 ай бұрын
Glad the video was able to help you..
@kentuckyed Жыл бұрын
Thank you, Thank you, Thank you. I watched a few other videos posted by other people who all said that it couldn't be done the factory recommended way, through the hole in the fender liner. So I followed their instructions and spent 3 hours working from the top and I just couldn't get it. Then I saw your video, followed it, and literally in 15 minutes I'm done. So this 72 year old guy really thanks you for posting this.
@classicrewind2715 Жыл бұрын
Thank you for the kind words. I am so glad I was able to help you. Thanks again for commenting, means a lot. All the best
@karenl.corrigan65689 ай бұрын
Well…..the O’Reilly salesman attempted to replace my low beam headlight but he could not get the old bulb to budge. Needless to say, that left me standing in the cold to figure it out myself😳 As usual, nothing in the manual so i went to KZfaq. You are right, it is tricky and that bulb was a bugger to loosen but I managed to get the passenger side replaced and functioning within 30 minutes. Afterwards, i read some of the comments….WOW‼️ Glad I landed on your video 1st‼️ NOTE: since i needed to replace one bulb, i opted to swap both halogen low beam bulbs with new LED light bulbs. Pricey alternative but i can definitely see the difference between the halogen versus LED. It’s a bright white beam that helps me see the road a bit clearer at night ( I rarely get to flip on my high beam). Thanks so much for your detailed video.
@classicrewind27159 ай бұрын
Hi, I'm glad you found my video first as well. Glad that I was able to help you in replacing your headlight bulbs. Hopefully I gained a new subscriber, LOL. Thanks for leaving a comment. It really means a lot to hear from people that have helped. All the best.
@Mike_Larry418 ай бұрын
Your video was the first one i seen a couple of years ago, when my light went out. Very helpful!
@classicrewind27158 ай бұрын
Thank you..
@jamessykes249 Жыл бұрын
Thanks for this video! I was not prepared to try from the top, so after 2 hours of perseverance, I was able to do it this way. The removal and replacement of the bulb is the nasty party. And yes, my hands are like Swiss cheese....but it was worth it.
@classicrewind2715 Жыл бұрын
Glad you persevered, and your hand is still intact. Glad I could help. All the best
@MrLilcease1 Жыл бұрын
Thank you so much. You save me from a big headache and $$$. You’re video was super clear and I appreciate you time and effort for doing this video
@classicrewind2715 Жыл бұрын
Thank you. I appreciate the kind words. I'm glad I was able to help. All the best
@boyderoutdoors10 ай бұрын
Thanks! Other vids I watched made it seem like going thru the wheel well was next to impossible. Got both mine changed out in about 20 minutes. 👍
@classicrewind271510 ай бұрын
Awesome. I'm glad I helped..
@markkempton45799 ай бұрын
Looks like a combo of removing the cover from above and then swapping the bulb below is a good mix. At least for the passenger side. The air intake blocks the light assembly on the driver's side.
@dazed6252 жыл бұрын
Thanks so much for this video!!! I was just able to successfully replace mine on my own! $18 for the bulb east peasy. Thanks again!
@classicrewind27152 жыл бұрын
Awesome!! glad I could help.
@lstefans8 ай бұрын
thank you thank you thank you. changed the driver side bulb easily following your video. I did not need to use the wheelwell access hole to do it and there is a bracket in the way between that access and the light anyway. Bulb cost me $22 and the clerk did tell me to wear gloves also. Thanks again.
@classicrewind27158 ай бұрын
Awesome I am glad the video helped you. A lot of technicians and clerks do not make you aware of wearing gloves, not to touch the bulbs. Thank you for commenting. Please Like and Subscribe if you like to. All the best
@Chuckfinley7006 ай бұрын
Was supper easy! Did it in 7minutes. I turned wheel. Did not remove or loosen anything. Just took both caps off and used two fingers and “torsions” to turn the bulb. Connected new bulb and played doctor for a bit and used my sensory ability to make the bulb my hand and feel “by vibration” the bulb and get it in the hole/ holder position it sits. Then used two fingers to turn and lock it back in. Saw a bunch of bs for driver side too. Was easy aswell. Did both in hannafords parking lot….
@classicrewind27156 ай бұрын
Awesome glad it worked for you. It's not as hard as a lot of people think it is. You just need patience. A small hand works too LOL. Thanks for the like and subscribe. All the best
@hornplayer4106 ай бұрын
Thanks for this video. Passenger side light hard to twist out, finally got it, really hard to get it to the lock position so I let it sit to hit the driver side. Absolutley could not get the driver side twisted out from the bottom, had to go in from the top. Not hard, hood gasket clip that crosses over the outside air intake must be slid free, air filter and housing removed and the access to the light is managable. Removed the old and replaced with the new. After testing the lights I returned to the passenger side to see if I could twist it in and was able to get that last quarter turn (from the bottom, wheel well that is). Maybe because the light heated during the test and then cooled and it helped? Who knows. Total time about an hour and wayyy better than the $850 quote from the local Jeep dealer. Not all that bad, if the lights twisted in and out easier, I could have been done in 20 minutes. Recommend the bottom entry for the first attempt. Good luck P.S. maybe coat light connection with silicone spray or something for the next time?
@classicrewind27156 ай бұрын
Excellent information. Thanks for sharing. You need to be careful about the silicone, not to get it on the halogen bulb. Awesome that you saved that money. All the best
@classicrewind27156 ай бұрын
Excellent information. Thanks for sharing. You need to be careful about the silicone, not to get it on the halogen bulb. Awesome that you saved that money. All the best
@cptbob1004 ай бұрын
You helped me do it on my grandma's jeep! Thank you sir
@classicrewind27154 ай бұрын
Glad that I can help...
@paulq02462 жыл бұрын
Thank you so much!! I watched so many videos but this one really helped
@classicrewind27152 жыл бұрын
All the best.
@OscarLopez-sx8ij Жыл бұрын
I appreciate the video. Watched 3 vids before I finally got it.
@classicrewind2715 Жыл бұрын
Glad you finally got it. Sometimes it's very difficult to remove
@maucen33413 жыл бұрын
No joke... Changing this was an event. If you pull the lamp's wire out, it's easier to twist the lamp counter clockwise towards six o' clock.
@classicrewind27153 жыл бұрын
It is easier to pull the wires out. I could not move my wires far enough out to put the light in. I had to do it in place with one hand which is very difficult
@maucen33412 жыл бұрын
@@classicrewind2715 I know exactly what you're saying lol. Still cut up my hands.
@classicrewind27152 жыл бұрын
Yes, it is very difficult. You need to get someone who has small hands to help. All the best
@dwaynethomas3374 Жыл бұрын
Best video for changing the headlights. It helped! Just go slow. Thanks
@classicrewind2715 Жыл бұрын
👍
@martycarbrey51436 ай бұрын
Passenger side - I could not do this from the wheel well. I loosened the ECM unit and then removed the two 10 mm bolts from coolant reservoir and move it to the side a little. This gave me enough room to get my hand in there. Hardest part after that was getting the bulb loose. Once I finally got it loose it was easy going. All these videos helped but what a pain in the arse.
@classicrewind27156 ай бұрын
Wow what model Jeep and year do you have? It will be helpful for others to know. My Jeep did not give me a problem. I was able to get my hand through the access hole in the wheel well. As the video shows. Thanks for commenting. All the best.
@martycarbrey51436 ай бұрын
2019 Grand Cherokee. Maybe someone with small hands can go that way but I could not. No leverage to loosen it. I could get full and easier access from the top.
@AngelLopez-cd3wg2 жыл бұрын
Gracias por el video… me ayudó mucho… greetings from Puerto Rico 🇵🇷
@classicrewind27152 жыл бұрын
Glad that I helped you, all the best 👍
@marcjorgensen2 жыл бұрын
F-jeep for this, both my arms, hands and wrists damn you. Look like I been fighting a cat 🐈
@classicrewind27152 жыл бұрын
LoL, yes. It does beat up your hands
@brettsbits53792 жыл бұрын
Mind mumbling stupid engineering. 1.5 hrs in and cannot get the thing in….
@shmatt199910 ай бұрын
Amazing video, exactly what I needed, thank you!
@classicrewind271510 ай бұрын
Glad it helped!
@user-jy5so5hu5f9 ай бұрын
This man cooked🔥
@classicrewind27159 ай бұрын
Fire...
@100tching2 жыл бұрын
I follow your steps. But, I can't get the headlight out. It is SO tight. It won't move at all. Any ideas how to take the headlight out?
@classicrewind27152 жыл бұрын
It should only be a 1/4 turn and then pull directly out. I hope this helps. All the best
@reodds2 жыл бұрын
I have the same problem. Am able to get to the bulb, but it won't turn. Any suggestions?
@classicrewind27152 жыл бұрын
@@reodds it only turns a quarter-turn, not that much and then pull out the from the housing. Let me know how it works out. All the best
@jamessykes249 Жыл бұрын
I actually needed my wife to pull it out as her hands are smaller than mine. Between the 2 of us, we were able to do this.....but sometimes you need tiny hands to help!
@classicrewind2715 Жыл бұрын
Agreed 👍
@clarrance72589 ай бұрын
really nice video bro! Had difficulty locating the bulbs but finally changed them myself! Can you also record a video on high beam plz? I didn’t find the high beam actually but a side light, thank you!
@classicrewind27159 ай бұрын
Thank you for the comment. Hope you subscribe LOL. I'll see what I can do. it's been awhile since I made that video. Haven't had a problem with my side light or high beams all the best.
@clarrance72589 ай бұрын
@@classicrewind2715 subscribed bro! Looking forward to ur new videos lol. Really don’t wanna remove all the front parts😭
@classicrewind27159 ай бұрын
Try to remove your wheels, that will give you more access to the cover in the wheel well. Maybe it will be easier for you to access the light that way. As for the high beam, I haven't had a problem yet. I might make a video removing a good one just to show everyone how to do it. All the best
@fishmantt9976 Жыл бұрын
Thanks 😊!!! Hard to turn bulb off 😪
@classicrewind2715 Жыл бұрын
Yes .very difficult. They should make it a lot easier to get the bulbs out
@joseanzures7005 Жыл бұрын
Muchas gracias fue de gran ayuda
@classicrewind2715 Жыл бұрын
Thank you
@Skoon21211 Жыл бұрын
I cannot turn the bulb. I can get my thumb, index and middle finger on it going through the top. No the best grip on it but it should be enough but it won't even budge. I probably spent an hour and it won't move. Such a small area, I'm not sure what tool I could use for better leverage. Any ideas? Thought about trying to wrap something around it and pulling it down from the bottom access area but I don't know. Drivers side was not tight at all...
@classicrewind2715 Жыл бұрын
It's only a quarter turn. try to pull it out or gently push on the side of a bulb housing, could be wedged in there. Let me know if this helps, All the best
@jermainewhite71212 жыл бұрын
Very helpful.
@classicrewind27152 жыл бұрын
Glad that I can help. All the best
@charlesmansfieldjr8728 Жыл бұрын
I couldn’t get mine out, my hand and arm was too big. I barely got three fingers in to try to turn the bulb to pull it out
@classicrewind2715 Жыл бұрын
It is a tight area. But what a lot of people don't know. It only turns a quarter turn and then you pull it straight out. Let me know if this helps
@hudekhoustonartist Жыл бұрын
Tried but no luck. I can get my hand up there, but I can't get in a position to get a grip on it. Can barley get my fingers on it much less turn the bulb socket.
@classicrewind2715 Жыл бұрын
I have big hands as well it was very difficult. Maybe if you have a friend with smaller hands good ask them to help you. I would hate to have you tear the whole front end apart to get at that bulb. All the best
@Frankyouknow Жыл бұрын
Well done
@classicrewind2715 Жыл бұрын
Thanks
@eicarter25022 жыл бұрын
So for the record this only works if you have small hands. I can only get like two fingers in that little space.
@classicrewind27152 жыл бұрын
It is challenging but you can do it.
@donnelson94242 жыл бұрын
Here's another option that I know is heresy to many but take it to a dealer. With no appointment, they replaced my low beam on the passenger side on my 2018 GC in 30 minutes for $62 including tax. I didn't ask but kind of suspect that because this is a safety issue and dealers want to avoid issues of legal liability at all cost, they'll take care of you as soon as possible. Also I appreciate that saving $25-$50 may be important but frankly saving my sanity as well as skin on my knuckles was worth it.
@classicrewind27152 жыл бұрын
I agree. Sometimes spending the money is worth it, less aggravation to deal with and busted-up Knuckles. All the best
@dazed6252 жыл бұрын
Disagree this was so simple!
@ChristineRasch Жыл бұрын
@@dazed625 it's fairly simple if everything is aligned. My bulb will not come out as it seems to be wedged. someone prior obviously screwed in socket wrong and now it won't turn at all. I have tried turning over hour.
@classicrewind2715 Жыл бұрын
That is too bad. Sorry to hear that . There must have been an issue with that side of the socket where they had to use something to screw the bulb into.
@martycarbrey514310 ай бұрын
My dealer wants $200 to replace the passenger. So will try this out
@plou44 Жыл бұрын
Hi, thx for your video, I have to replace daylight left bulb (3157). Is it the same way to access? J from France.
@classicrewind2715 Жыл бұрын
Hi, I am not sure if the bulb sizes change since you are in Europe. But the one that I changed is H11 try going to the parts store and asking them if they would fit your year Jeep. Thank you for watching the video. All the best
@plou44 Жыл бұрын
@@classicrewind2715 Thanks for your reply, but you know, when I purchased this 2011 GC 3.6L Overland, I was told it would be supported by the FIAT CHRYSLER network, today STELLANTIS. This is false, they consider the model to be too old and I had to find a garage that was equipped to work on this car. That's a shame. Even for a basic bulb, I have to order on the net. Rockauto, but often the shipping cost is more expensive than the item. There, I bought my bulbs in Italy. As soon as the weather permits, I will try to replace the left daytime running light bulb (code 3157). Thanks again and all the best for 2023!
@classicrewind2715 Жыл бұрын
Hi J, That's a shame to hear that you're having such a hard time just to replace a bulb. I know that the European models here in the states sometimes could be very difficult to find parts. Let me know how it works out for you. Have a healthy and happy New Year. All the best Harry.
@GeoJad10 ай бұрын
Thanks!
@classicrewind271510 ай бұрын
👍
@ivobignami69622 жыл бұрын
It’s just one light bulb for the high beam and low beam?
@classicrewind27152 жыл бұрын
It's been a while since I changed light bulb in the Jeep. I'm pretty sure in that model year it is only one light bulb. All the best
@ivobignami69622 жыл бұрын
Is just one light bulb for the high beam and low beam?
@classicrewind2715 Жыл бұрын
I am not sure if the bald sizes change. I will have to look into that and get back to you. All the best
@brettsbits53792 жыл бұрын
Did you align the bulbs after install? Just put some led’s in and the seem way out of line.
@classicrewind27152 жыл бұрын
No, I just change the light bulb. Did not mess with the light adjustment.
@rdonnell5389 Жыл бұрын
LEDs have a different focal point, so adjusting is needed, but stock h11 bulbs don't.
@classicrewind2715 Жыл бұрын
Thanks for commenting, that's good information. All the best
@joseanzures7005 Жыл бұрын
More videos like this make ease x every vary
@classicrewind2715 Жыл бұрын
Glad it helped you.
@hardknocknewshkn6397 ай бұрын
That’s where the high beam headlight is
@CigarsNTequila11 ай бұрын
Is driver side as easy?
@classicrewind271511 ай бұрын
Both was the same effort. All the best
@malikmontgomery Жыл бұрын
Tried my best yesterday but light wouldn't come out unfortunately just took it to my mechanic had to spend 60 dollars
@classicrewind2715 Жыл бұрын
I had a lot of people comment that it's difficult to remove the bulb. It should only be a 1/4 turn, then pull out.. Sorry you had to pay someone else to replace the bulb. Just want to help. All the best
@mrterrywatkins6 ай бұрын
I spent all afternoon and got bloody hands trying this, those wheel well ports do nothing, you cant change the bulb from there , nor if hood raised, now the high beam, yes, low beam , nope, on a 2017 the low beams are up inside a several inch long tube, you will regret trying trust me
@classicrewind27156 ай бұрын
Thanks for the great info. All the best
@mrterrywatkins5 ай бұрын
This dont work on 2017, so dont bother trying!
@GaryPiazza4 ай бұрын
I have a 2017 and they don't appear to be replaceable. There is no harness for one of the bulbs as it's hidden in the housing somewhere. The low beam has the cover, but once you get it off, there is a shiny steel box attached to a shiny metallic braided line and this is not removeable. So, some of the jeeps require an entire headlamp replacement? Both my low and highs don't work on the driver's side.
@classicrewind27154 ай бұрын
@GaryPiazza yes some 2017 you cannot access the bulbs. When I made this video, some 2017's came with different headlights. Sorry for the confusion
@GaryPiazza4 ай бұрын
@@classicrewind2715 Thanks for the reply. Yes, I'm learning that some came with these self-contained HID units and the entire assembly has to be replaced. Ugh...
@GaryPiazza4 ай бұрын
Update - No need to replace the entire unit. The HID's are replaceable. There is a ring around the ballast that must be rotated. Once released, you can replace the OSRAM part.
@GaryPiazza4 ай бұрын
@@classicrewind2715 Okay, update. Found out that the D3S HID's are replaceable, but you have to rotate a locking ring, not the ballast, but the locking ring holding the ballast in place. It is an OSRAM part that you can buy online or at the dealer and then replace it.
@Nightowl822 жыл бұрын
You can do it alot easier from up top, there are plenty of videos on youtube.
@classicrewind27152 жыл бұрын
I show you in my video both ways to remove the bulb. from the top and also from the access in the fender well.
@eicarter25022 жыл бұрын
So from the top you can access the high beam light but you can't access the low beam. I know for my truck I can and to be honest I can't even access my the way he's doing it here because my hands are too big I can barely get two fingers in there
@classicrewind27152 жыл бұрын
@@eicarter2502 yup. My hands barely fit as well.
@alexandersheets1 Жыл бұрын
I'm going to say what nobody wants to hear: the only real way to do this is blind and by feel