Low Effort 3D Printed Helmets (NO SANDING)

Рет қаралды 7,083

Ай бұрын

👋 Welcome to my channel! In today's video, we're diving into the world of 3D printing to create stunning helmets without the tedious task of sanding. If you're tired of spending countless hours sanding your 3D prints, this is the video for you!
🔧 *What You'll Learn:*
- Where to get high quality 3D models for printing helmets
- Tips and tricks for achieving smooth finishes straight off the printer
- Materials used in the project for the best results
- Post-processing.
👍 *Support the Channel:*
If you found this video helpful, please give it a thumbs up and consider subscribing for more awesome 3D printing tutorials and projects. Don't forget to hit the bell icon to get notified whenever I upload new content!
🔗 *Links & Resources:*
- High Quality 3D models - www.do3d.com
- Sizing Heads - www.thingiverse.com/thing:488...
- Cosplay Callipers - www.thingiverse.com/thing:289...
- 3D Printer I'm using - Bambu Lab P1S 3D Printer
- Scarlet Red Matte Filament - rb.gy/4v5yzv
- Matte Black Filament - rb.gy/uo9w1c
- Matte Ivory White Filament - rb.gy/28rnnd
- PLA Basic Yellow Filament - tinyurl.com/PLA-Basic-yellow
- Model snips - rb.gy/t2cy2h
- Size 00 paint brushes - rb.gy/vt0kkm
- Vallejo Matt Black - tinyurl.com/Vallejo-Matt-Black
- 8 x 2mm Magnets - tinyurl.com/8x2mm-Magnets
- Gorilla Super Glue - tinyurl.com/Gorilla-Super-Glue
- Super Glue Accelerator - tinyurl.com/superglue-Acceler...
🌐 *Follow Me:*
- Instagram: [ / cityparkgifts ]
Thank you for watching and happy printing! 🎨
---
*Tags:* #3DPrinting #Helmets #NoSanding #DIY #LowEffort #3DPrintTips #MakerCommunity
---
Cosplay Calipers! Easy way to scale Helmets & Armor for 3D Printing
• Cosplay Calipers! Easy...
Second video
How to Scale 3d Printed Helmets! Perfect Sized Helmets Every Time!
• How to Scale 3d Printe...
By following this guide, you'll be able to create incredible helmets with minimal effort and zero sanding. Get ready to show off your creations with pride!
---
*Disclaimer:* This video is not sponsored. All opinions and recommendations are my own based on personal experience.
---
Thank you for being a part of this creative journey. Keep innovating and printing!

Пікірлер: 28

@ronsku57 Ай бұрын

Underrated video! Keep going!

@cityparkgifts Ай бұрын

Thank You

@KennethRapo 20 күн бұрын

You forgot to mention you have the layer height profile set to .12 instead of standard .2 But great vid, just bought my first helmet and was looking for slicer settings. Have you tried printing any of the helmets with .2 layer height instead of the .12? Also, the helmet i bought says it's scaled for 24" head, but when I load in the sizing head 3, that's only supposed to be 23.2" it looks like it's to big.

@cityparkgifts 20 күн бұрын

Thank you for the comment. I will attempt to mention it next time. I haven't tried printing it at a .2 layer height; I don't believe the quality would be there, but I may be wrong. If you do wind up printing your helmet at .2, please let me know how it works out. Regarding the size problem, could you please tell me what helmet you brought and where you got it so I can look at it.

@genises200 Ай бұрын

Could you make one with statues by chance? Or would this be only for cosplay

@cityparkgifts Ай бұрын

Absolutely, check out the next video when I upload this weekend.

@genises200 Ай бұрын

@cityparkgifts awesome you rock!Definitely will

@genises200 Ай бұрын

So in short just do the adjusted setting you put? Sorry new to 3d printing

@cityparkgifts Ай бұрын

Yes, I see no reason not if you have everything I have, including the Bambu printer and studio. Let me know how it turns out.

@macoyvg Ай бұрын

So why do you use cura for measure and Bambú for slicing ?

@cityparkgifts Ай бұрын

So I used Cura to measure since I unchecked the option drop down model, which allows me to freely move the model around, but Bambu works differently, and I just prefer Cura for that.

@mikekiske 20 күн бұрын

@@cityparkgifts Hi, there. For the spiderman helmet how much costed to you to print, filament wise? Thanks.

@cityparkgifts 20 күн бұрын

@@mikekiske So take Spiderman for example each roll would cost about £15.99 which would cost in total £47.97 you will use 597g of the red just over half a roll and then you will use 51.18g of the black and then the white you will use 11.09g . All the extra filament could be used to print something else. This is not including any failed prints or any other issues.

@mikekiske 20 күн бұрын

@@cityparkgifts Thanks for the detailed explanation. Exactly what I wanted to know. :o)

@cityparkgifts 20 күн бұрын

@@mikekiske Happy to help.

@sloshedmrbones Ай бұрын

Where did you get the file for the helmet stands?

@RockyxMM2 Ай бұрын

you can probably make your own, recreate the base at the bottom then at the top make it like a mushroom. you can also use servos to make the whole thing spin

@cityparkgifts Ай бұрын

So I got the stand file from makersworld.com - it's called Simple Helmet Stand with Base Remixed by wallcrawler62

@RockyxMM2 Ай бұрын

@@cityparkgifts that works too

@pokee9685 Ай бұрын

Printing speed?

@macoyvg Ай бұрын

I rewinded thinking that was somewhere too lol

@cityparkgifts Ай бұрын

Hi sorry I skipped over that the printing speed is the default in Bambu Studio Initial layer 500 MM/s and Normal printing speed 10,000 MM/S

@pokee9685 Ай бұрын

@@cityparkgifts what!? I dont understand.... max speed for your p1s its 500, so you made the first layer at max, and the rest? 10mm/s? You cant at 10.000mm/s

@cityparkgifts Ай бұрын

@@pokee9685 Sorry Pokee, my mistake. I was looking at the incorrect settings. So my initial layer is 50mm/s, my initial layer infill is 105mm/s, the outside wall is 200mm/s, the inner wall is 350mm/s, the sparse infill is 430mm/s, the top surface is 200mm/s, and the slow down for overhangs option is selected. I hope this clears things up.

@pokee9685 Ай бұрын

@cityparkgifts ok, thank you for the correct settings 👍