Low Poly Sword Blender Tutorial For Beginners!

Рет қаралды 17,622

Жыл бұрын

In this tutorial you are going to learn how to create a low poly sword in blender in a few simple steps.
I'm new in doing tutorials, so please give me feedback in the comments. If you have any questions you can ask them in the comments.
Thanks for watching!
Download Blender: www.blender.org/
Music by: / @infraction
#blender3d #tutorial #lowpoly #3d #beginners

Пікірлер: 70

@afrancis7475 3 ай бұрын

Some feedback: Please show how to enable Loop Tools first! Also mention the changes between the three buttons next to the "Edit mode" dropdown in the top left corner. There are moments when you switch between the Select Modes and you don't mention them. After the two minute mark, my sword ended up very crooked, I probably did something wrong of course but as a complete beginner it's really important that I can follow every step. Apart from that, it was an interesting tutorial, and I might try again some other time when I feel less defeated.

@possiblyzslot838 2 ай бұрын

Yes, I'm not a complete beginner so I understood how to do stuff that wasn't shown or mentioned, but this isn't really a "beginner's" tutorial. Interesting nonetheless.

@truehamlet3136 25 күн бұрын

For those who are stuck: Preferences > Add-ons and then search Mesh: Loop Tools to enable!

@nightwizard4168 2 ай бұрын

This tutorial is amazing, thank you so much! You have a very calm and clear way of teaching, thank you :)

@mattheguy4057 Ай бұрын

underrated video

@Troevan 5 ай бұрын

i really like this thank you

@tengertechnologies 4 ай бұрын

Thank you for the feedback

@GlacialPeakEntertainment Жыл бұрын

This is the only beginner tutorial that actually works for me thanks you also gained a new sub! btw could you do a flanged mace tutorial sometime?

@tengertechnologies Жыл бұрын

Thank you for the feedback and for subscribing!

@tengertechnologies Жыл бұрын

It‘s uploaded :D

@mmkn11 Жыл бұрын

great video my friend! 🤝

@tengertechnologies Жыл бұрын

Thank you!

@normangayden Жыл бұрын

thank you

@tengertechnologies Жыл бұрын

You‘re welcome, thanks for watching!:D

@vincent4087 4 ай бұрын

Tsym bro

@shrimp381 Жыл бұрын

Great little guide, the key info in the corner was a nice touch. Keep it up!

@tengertechnologies Жыл бұрын

Thank you! :D

@1972SCOTCH 5 ай бұрын

A very nice tutorial. I currently use Blender 3.6.2 The Loop tool was not displayed to me in the menu (RMB or W). I was able to activate this via the AddOn menu (Menu: Edit -> Preferences - AddOn) then Search for Loop tool.

@tengertechnologies 5 ай бұрын

Thank you for your feedback! Yeah thats exactly how you supposed to do that. I should've mentioned it more clearly.

@brycepues6147 9 ай бұрын

I’m new to blender when I press w to insert the circle face it doesn’t do anything makes my curser Change

@tengertechnologies 9 ай бұрын

If you're default selection key is LMB, you should be able to open the menu with your RMB. Let me know if this worked. So we can troubleshoot if it didn't.

@brycepues6147 9 ай бұрын

@@tengertechnologies what do you mean what do I do with the pop up menu from RMB

@tengertechnologies 9 ай бұрын

Now you need to choose "LoopTools" and then "Circle". If the option "LoopTools" isn't available, you have to enable the addon. You can do that if you go to "Edit->Preferences->Add-ons" (In the menu on top), then search for "LoopTools" and then enable it.

@brycepues6147 9 ай бұрын

Thank you I have made it past it now I have learned a lot of new tools from this video I Apreciate the fast responses

@tengertechnologies 9 ай бұрын

Nice, thank you for watching! I wish you all the best on your journey with Blender!

@Omar_Jaber 6 ай бұрын

When i press g and z and moving it up there a edge down

@keningerlaszlo9876 2 ай бұрын

When u pushed the Z key and clicked, a little window will pop up "move" in that window click "Proportional Editing"

@ExileChildGaming 10 ай бұрын

When I press "I" to inset them it insets them separate from each other centered on each cut of the cube. How do I fix that?

@tengertechnologies 9 ай бұрын

Simply press “I“ again. You can toggle between individual on or off by pressing it while insetting.

@violajohnrussell5224 4 ай бұрын

I know this is an old video, but how do I change and remove those dots that connect the edges and make it like yours? So I can do the right click thing to edit it and select the whole sruface or shape.

@tengertechnologies 4 ай бұрын

Hi, you can use the numbers 1,2,3 to change the select mode. (Those above the character section, not the numpad. The numpad numbers are to change the view angle)

@violajohnrussell5224 4 ай бұрын

@@tengertechnologies TYSM!!! I'm following your steps in doing my own for school purposes! Thankyou.

@tengertechnologies 4 ай бұрын

That's very nice to hear! I wish you happy learning!

@Bowganian456 2 ай бұрын

2:47 by extruding along the normals, the sides seperates from each other over here (using blender 4.1 if that makes a difference), instead of staying together, am i doing something wrong?

@tengertechnologies 2 ай бұрын

Could it be, that you accidentally chose "individual faces" instead of "along normals"? It's located in the same menu. (Checked with Blender 4.1)

@ppok123y2 Жыл бұрын

Can you teach me how to make a sickle to harvest rice? (using google translate)

@tengertechnologies Жыл бұрын

Sure, I‘ll add it to my list

@glitchprem1x29 Жыл бұрын

For some reason when I try to select the 2 bottom faces on the cube it doesn't work?

@tengertechnologies Жыл бұрын

You have to hold the shift key and select the two faces with rightclick or leftclick, depending on what you selection key is. Let me know, whether it worked or not.

@jepeen 10 ай бұрын

when i do the the inset I thing it tweaks out

@tengertechnologies 10 ай бұрын

I'm not sure what you mean with "it tweaks out", but maybe it has to do with what your inset is set to. If you press "i" twice you can switch between individual on or off. This means that you can either inset all selected faces separately or all together. I hope this helps. Otherwise feel free to ask again.

@ynfra 7 ай бұрын

S and then Y scales the whole damn thiung for me D:

@tengertechnologies 7 ай бұрын

Did you press them at the same time or one after the other? One after the other would be the correct way. I can't think of a different problem here. Maybe you can check wether your keymap is default or not. Let me know if you got it to work, otherwise we can try to troubleshoot.

@ynfra 7 ай бұрын

@@tengertechnologies i pressed O before, so yeah problem fixed, thanks for the support man :D

@tengertechnologies 7 ай бұрын

Glad you figured it out! As an explanation: If you press O, you turn on proportional editing. This means that everything you do gets proportionally done on everything in the area of influence. The area of influence is the circle that appears on your screen and you can control the size of it with the mousewheel.

@_reffrain8959 3 ай бұрын

how to make the sword tip sharp?

@hollowtongue 3 ай бұрын

you could click the 2 vertices hit M (for merge) then at center and it will make them a point. the same goes for the blade as well

@gameswitheli 8 ай бұрын

When I press ctrl + R it didnt cut? I call bull?

@tengertechnologies 8 ай бұрын

A different way to do it would be, using the loopcut tool in the toolbar on the left. You can check which one it is by hovering over it. It's hard to say what the problem is. You could check your keymap settings, for that go to "Edit->Preferences->Keymap" and search for "Loopcut". If it is set to ctrl+R, there could be another program on your pc that causes the problem. I've read about people who had this problem because the had a vpn installed, which uses the shortcut too. Hope this helps:)

@gameswitheli 8 ай бұрын

Its apparently set to ctrl r but I dont have a vpn and nothing else is used for ctrl r so I think blender just hates me@@tengertechnologies

@gameswitheli 8 ай бұрын

I am so sorry.. I forgot to press tab LMAOOOOOOOOOOOOOOO@@tengertechnologies

@tengertechnologies 8 ай бұрын

@@gameswitheli Hahaha no problem. It happens to the best desingers sometimes I think.

@gengax9458 10 ай бұрын

When I click w I can't see loop section can you help?

@tengertechnologies 10 ай бұрын

You have to enable the addon „Looptools“. It‘s located at Edit>Preferences>Addons

@gengax9458 10 ай бұрын

@@tengertechnologies tysm

@somecheese1318 7 ай бұрын

It doesn't show me loop tools when i press W and shows me select button, what can I do here?

@somecheese1318 7 ай бұрын

im on blender 4.0, does that change anything?

@tengertechnologies 7 ай бұрын

If you are using the default keymap, you should be able to open the context menu with right click. (I have set my keymap to the old default where you select with right click, this changed in Blender 2.8 to be default to select with left click) If you are able to open the menu and Looptools doesn‘t show up, make sure that the plugin is enabled in Edit>Preferences>Addons

@somecheese1318 7 ай бұрын

@@tengertechnologies thanks man

@snowey-dv6hj 4 ай бұрын

why cant i export with colour?

@tengertechnologies 4 ай бұрын

Which export format do you need?

@DocinatorOfficial 8 ай бұрын

when i press W it does not work 0:50

@tengertechnologies 8 ай бұрын

If the menu doesn't show up, try using you right mous button instead. If the menu shows up, but there is no Loop Tools section, you have to enable the addon under "edit>preferences>addons" and then search for looptools.

@viktorsenyk8295 6 ай бұрын

shift+ Right Mouse doesnt work

@tengertechnologies 6 ай бұрын

Have you tried shift+ left mouse already?

@viktorsenyk8295 6 ай бұрын

@tengertechnologies I tried that, but I found a way out. I just had the dot mode (top left) turned on, so it didn't highlight. thanks for the tutorial

@tengertechnologies 6 ай бұрын

Glad you figured it out! Thank you for watching!