Low Relief Sewing/ Custom Door Panel - Auto Upholstery
Рет қаралды 205,355
4 жыл бұрын✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
I have sometimes found a customer wants a replica of its original door panel. These 'original' replica-sewings, including the low-relief channel were heat-embossed with a big hydraulic press.
The way I show in this video is an option to customize a door-panel in leather material (1.3 thick).
As a way of training I have exaggerated with a 9 mm depth for the channel around the grey insert. Regularly, these channels are 5 mm deep and would be much easier to handle.
As a way of testing I also have thoroughly used polyurethane glue. Before, I mostly used the traditional yellow glue on wide areas and polyurethane glue on very small irregular areas.
As we can see in the video a hair dryer (hot air) was useful to activate the transparent adhesive. The dryer mouth can get close to leather material and causes no damage.
I hope you find this video useful!
Cesar
@dustynbustos5983 3 жыл бұрын
The thing I love most about watching your videos, is how you're never in a hurry. You always take your time and do a nice job, and you treat your tools well. Those fundamental, important things, have become a rarity in today's society.
@daveswinfield 3 жыл бұрын
IKR? That 185 year old sewing machine is a testament to that man's care for tools.
@alexanderbondarev2265 9 ай бұрын
Вы лучший!
@xonelife1983x 3 жыл бұрын
I'm addicted to watching your videos!! Amazing talent!😁
@markkraus3598 Жыл бұрын
One of these days you need to show a completed interior , just these smaller examples have more attention to detail then a lot of shops would put in the whole job ! Well done 👍
@Cechaflo Жыл бұрын
Unfortunately, I have not recorded the complete interiors I achieved. This is a job I did a few years ago: www.speedhunters.com/2017/03/project-33-the-ultimate-interior-upgrade-part-1/
@Cechaflo Жыл бұрын
More related videos for the GTR33 project: Part 1 kzfaq.info/get/bejne/fpmHeaeHzJOwdKM.html Part 2 kzfaq.info/get/bejne/gdCSes2qmc3Uiac.html Part 3 kzfaq.info/get/bejne/oq11itFlzLupnZs.html Part 4 kzfaq.info/get/bejne/pbmEmqeI2Z6Ro2w.html Part 5 kzfaq.info/get/bejne/l8B1hbh5r6vQgY0.html Part 6 kzfaq.info/get/bejne/pJ6lh5p0262aimQ.html kzfaq.info/get/bejne/os1hntR6kprXooE.html
@markkraus3598 Жыл бұрын
Thank you for the videos . Again-your attention to detail is amazing !! Have a good one ,Mark (Florida,USA)
@LilDirt12 4 жыл бұрын
Impeccable as always. Thank you you two. Much love. 💞
@normanddoucet2232 4 жыл бұрын
Beautiful job Cechaflo! I love your perfection!
@vdubjunkie 2 жыл бұрын
As always, the work is stunning. I wonder if this is real leather, or just a nice vinyl, or something. As others have said, your methodical attention to detail is refreshing. Some people do still care about the quality of their work.
@Cechaflo 2 жыл бұрын
I used real natural cow leather for this sample. These are related videos using the same tehcnique. kzfaq.info/get/bejne/fdeHqtKVr5uthIk.html kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@JimmyCogg 3 жыл бұрын
This is stunning. What a perfectionist!
@Oasis_Sifnos 4 жыл бұрын
I have always loved your work! You are a true artisan.
@Cechaflo 4 жыл бұрын
I used same method for 4 MBenz door cards:kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html But not so deep (9mm). Just 5 mm deep.
@xvsupremacy7190 4 жыл бұрын
Such craftsmanship Trebbian
@michaelcullen8278 4 жыл бұрын
Amazing work as always
@Gringo74. 4 жыл бұрын
Buenas noches amigo, espero estés muy bien en esta cuarentena que tanto nos apena a todos los lo triste que pasa en el mundo, te felicito por tus trabajos que excelente terminación tenes y prolijo, te sigo a full, muchas gracias por compartir con nosotros tus conocimientos. Te felicito. Abrazo GRANDE desde Argentina
@PaulDaviesSEO 3 жыл бұрын
Great work @cechaflo !
@pedroenriquecuevasrivas1267 8 ай бұрын
Éres el mejor
@Jimmy-cq6hh 3 жыл бұрын
Волшебник! Мой любимый автомобиль, мечтает о руках этого человека.
@reguloleonelquirozcortes5352 2 жыл бұрын
Felicidades por la enseñansa ,este maestro es mi gallo
@policarpocernarosado4835 2 жыл бұрын
buenos días 🙂 Gracias x compartir tus conocimientos
@rudy2aa 4 жыл бұрын
Don cesar excelente trabajo como siempre saludos !!! ⭐️⭐️⭐️⭐️⭐️ y +
@frankpineda1832 2 жыл бұрын
I really love your work 👏👏👏👏👏👏👏👏👏
@Cechaflo 2 жыл бұрын
Related videos using the technique shown in this video: kzfaq.info/get/bejne/oMCEabmasbyXj2g.html kzfaq.info/get/bejne/fdeHqtKVr5uthIk.html kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@tonykelly2137 2 жыл бұрын
Awesome work!
@pilotnelson4507 3 жыл бұрын
I'll bet Caesar makes a great pie crust too!!!
@heshamzaker9602 4 жыл бұрын
I love your creativity. Hesham.. from Egypt
@Cechaflo 4 жыл бұрын
I used same method for 4 MBenz door cards:kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html But not so deep (9mm). Just 5 mm deep.
@jehujosiascallupesantiago9695 4 жыл бұрын
Me gusta la paciencia con la que lo hace ...buen trabajo.
@AngelGomez-de1ec 4 жыл бұрын
Excelente maestro, felicitaciones.. Gracias por compartir sus conocimientos 👏👏👏👏👏
@Cechaflo 4 жыл бұрын
Usé un método parecido en unas puertas de MBenz. El canal de bajo relieve estuvo a 5 mm. En la muestra de este video lo hize como entrenamiento a 9mm. No es necesario tanta profundidad.kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@emmanuelrodriguez8543 4 жыл бұрын
Buenas tardes maestro cesar, admiro su excelente trabajo y aprendo como hacer los trabajos, muchas gracias por compartir su experiencia en el ramo de la tapiceria.
@mous1888 4 жыл бұрын
Exellent work!
@Cechaflo 4 жыл бұрын
I used this method for 4 MBenz door cards:kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@homerdiaz9289 4 жыл бұрын
Tener las máquinas y herramientas necesaria dar un mejor acabado puede ser el mejor tapicero pero no dispone de herramientas muy dificil felicidades y gracias por compartir sus conocimientos saludos desde loja Ecuador
@haruntokdemir 2 жыл бұрын
1. Clas 👌🍁🌺🌹🥀
@deltajohnny 4 жыл бұрын
El acabado es espectacular... y esas pieles tienen muy buen aspecto y seguro que tacto 👏👏👏😉😉😉
@gustavolloclle2182 4 жыл бұрын
Muy buen trabajo maestro. Like!
@Cechaflo 4 жыл бұрын
Usé un método parecido en unas puertas de MBenz. El canal de bajo relieve estuvo a 5 mm. En la muestra de este video lo hize como entrenamiento a 9mm. No es necesario tanta profundidad.kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@awaismalikmalik5800 4 жыл бұрын
Nice work sir
@Cechaflo 4 жыл бұрын
I used same method for 4 MBenz door cards:kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html But not so deep (9mm). Just 5 mm deep.
@charlesloomis2224 4 жыл бұрын
His weathered hands scream, “I know what I’m doing.”
@antonioosoriokory 3 жыл бұрын
De verdad un trabajo de arte yo hago muebles tapizados para el hogar pero claro que tambien me gusta la tapiceria automotriz saludos desde la ciudad de México.
@Cechaflo 3 жыл бұрын
Estimado amigo, va muy relacionado la tapicería de muebles con la de carros. Es asunto de irle agarrando el modo poco a poco. Afortunadamente, en estos tiempos el internet es de gran ayuda para mejorar nuestros conocimientos.
@user-nn9ps3sd8b 3 жыл бұрын
Просмотра спасибо. Очень красиво аккуратно кожаная кресло машина
@elnekave52 4 жыл бұрын
עבודה יצירתית. יישר כוח ידידי
@user-yx5ny3vu3v 4 жыл бұрын
Thank you
@vmc5150 4 жыл бұрын
Parabéns mestre como sempre um exelente trabalho, sou estofador de Belo Horizonte
@Cechaflo 4 жыл бұрын
I used same method for 4 MBenz door cards:kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html But not so deep (9mm). Just 5 mm deep.
@deanrobinson3717 4 жыл бұрын
Excellent
@Cechaflo 4 жыл бұрын
I used same method for 4 MBenz door cards:kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html But not so deep (9mm). Just 5 mm deep.
@user-lk4fn8be5o 4 жыл бұрын
Professor Batem, I have never seen anyone like him .. God wills ..
@Cechaflo 4 жыл бұрын
It is not necessary to do it so deep (9mm). A channel 5 mm deep is more than enough. A thinner and softer leather would help much more.
@sandrovera9726 4 жыл бұрын
Excelente video amigo muchas gracias👍👍👍👍
@Cechaflo 4 жыл бұрын
Usé un método parecido en unas puertas de MBenz. El canal de bajo relieve estuvo a 5 mm. En la muestra de este video lo hize como entrenamiento a 9mm. No es necesario tanta profundidad.kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@sandrovera9726 4 жыл бұрын
@@Cechaflo aah ok gracias 👍👍
@aamantium1 4 жыл бұрын
Kind of sad how I'm as amazed by the quality of scissors as I am by the craftsmanship in the panel...
@user-rf7df4do8c 4 жыл бұрын
это мастер . знает что делает .поверь мне на слово .учись .
@CrankAddict 4 жыл бұрын
You should buy some surgical hemostats like surgeons and dentists use to place stitches. It will make tying those loose threads easy.
@user-rf7df4do8c 4 жыл бұрын
по рукам всегда узнаю.зачет
@andrespaulino1545 4 жыл бұрын
Saludos cechaflo desde República Dominicana, me gustaría ver un tutorial, como capitonear el techo de un vehículo.
@hmarvin5044 4 жыл бұрын
Que bonito ese trabajo del tapizado , bien profesional .
@Cechaflo 4 жыл бұрын
Es una práctica, una muestra donde quería probar el pegamento de poliuretano. Exageré la altura del relieve. No es necesario tan alto. Hace poco forré en cuero unas puertas de MBenz usando solo el pegamento amarillo.kzfaq.info/get/bejne/sN9jpJmSrLDMj6c.html
@hmarvin5044 4 жыл бұрын
@@Cechaflo De todas maneras muchas gracias por mostrarnos ese trabajo tan detallado .
@michaelvargasegas1786 3 жыл бұрын
Me.encanta sus trabajos lo aser duper bien pero como me encantaria q lo explique ya recien estoy aprendiendo soy peruano
@Cechaflo 3 жыл бұрын
Hay muchas cosas en la tapicería que no necesitan hablarse. Al mirar nos damos cuenta de que se trata.
@turbo96integra 4 жыл бұрын
You are a master craftsman of the trade. I have a quick question would you do anything different if you were working with tweed or cloth or spaulding softside vinyl instead of leather?
@Cechaflo 4 жыл бұрын
Procedures are similar.
@miltonjasso5843 4 жыл бұрын
Muchas gracias por su tiempo Maestro Cesar, Se a ganado un seguidor más!!! la Calidad de su trabajo es excelente 👌, una pregunta me podría decir que tipo de marcador tipo lapicero utiliza, Muchas gracias Sr.
@Cechaflo 4 жыл бұрын
Le llaman pluma/lapicero plata para marcar piel/cuero. Lo usan mucho los fabricantes de zapatos. www.amazon.com/Jili-Online-Pieces-Leather-Marking/dp/B078QX3RVP www.ebay.com/itm/Leather-Marking-Pen-Schmidt-700-Silver-Upholstery-Marker-Made-in-Germany-/142147939238 www.leatherseats.com/shop/professional-upholstery-supplies/t-1000-silver-ink-pen.html www.amazon.com/Tandy-Leather-Marking-Pen-2097-00/dp/B00QAUYDYI Responder ·
@miltonjasso5843 4 жыл бұрын
@@Cechaflo Muchas Gracias por la muy pronta respuesta !! Se le agradece mucho su tiempo Sr.
@user-ut1xv6ki6f 4 жыл бұрын
Супер
@veronikarox 4 жыл бұрын
Very nice !! May I ask what’s that green tool you use on the edges of your leather ? And what is it doing?
@Cechaflo 4 жыл бұрын
I guess you are referring to these modeling tools:www.amazon.co.uk/Baker-Ross-Plastic-Modelling-Tools/dp/B07DQQJ4KH
@Offroadkartplans 4 жыл бұрын
Hi Cechaflo - beautiful work - as usual, may I ask, what is the white board that you cut the panel design out of and then glued to the door card?
@Cechaflo 4 жыл бұрын
Memory Eva (ethilene vinyl acetate)foam. kzfaq.info/get/bejne/iLWKn86InpzMdn0.html&feature=emb_logo
@SIE7EJL 2 жыл бұрын
Gracias por el video Maestro, mire que ya tenia una costura de hilo rojo Al momento de hacer su costura, entonces le paso dos costuras para la Union?
@Cechaflo 2 жыл бұрын
Fue una sola costura para unir las piezas. Esta costura roja previa solamente la usé como referencia (color resaltante) para coser la verdadera de 'unión' a 2 mm de esta y que me quedara el cm de tolerancia de costura. ¡Muchas gracias por ver los videos!
@carlosmoreno9094 4 жыл бұрын
Maestro que nombre tiene la máquina de adelgazar las pieles es muy práctica. , saludos Maestro hermoso trabajo ✌🏾
@Cechaflo 4 жыл бұрын
Es una rebajadora de piel/cuero de fabricación alemana (mas de 100 años de uso) La marca es Fortuna V50-S La utilizan mucho los fabricantes de zapatos y los artesanos que trabajan el cuero. kzfaq.info/get/bejne/kKmPdKSonaeph2Q.html
@jukkahakola9929 2 жыл бұрын
Dirty machine is working , just like 100 hundred years old
@Cechaflo 2 жыл бұрын
Yes, still working. But, it is not too old. It is approx 40 years old. This leather skiving machine is more than 100 years and still working: kzfaq.info/get/bejne/h7ypjKZkksDGpZs.html
@SynergyAVE 3 жыл бұрын
What is the green machine @ 1:35 called and what exactly does it do? I assuming it makes the leather more pliable? As you can tell, I know nothing about upholstery, however, I have always wanted to learn more about the process.
@Cechaflo 3 жыл бұрын
It is a leather skiving machine. The trademark is Fortuna, made in Germany. It reduces the leather thickness. It makes the sewing edges thinner avoiding bulky areas. It skives narrow areas of maximum 5 cm wide according to the roller beneath that drags the material under the presser foot. kzfaq.info/get/bejne/h7ypjKZkksDGpZs.html kzfaq.info/get/bejne/nN6Pi9h6rcmzZWQ.html
@cassioborges4723 2 жыл бұрын
Ola, tudo bom? Trabalho é perfeito, qual cola é usada neste trabalhos ?
@Cechaflo 2 жыл бұрын
kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@dkbeck8 4 жыл бұрын
What type/size thread were you using in this video? Love your videos! Thank you
@Cechaflo 4 жыл бұрын
I used the standard 92 size upholstery polyester thread to attach the grey insert to lateral piece. As decorative I used a thicker polyester thread. I suppose it corresponds to 207 size. www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Store_Code=TTE&Category_Code=polyester-thread
@docfischer7291 4 жыл бұрын
Cechaflo I love your “ stitch in the ditch “ method. Do you ever find it necessary to place a backing under that material to hold the stitch better ? Are you still using a 135x17 needle with a 22 or 24 sizing ? Thank you 🙏🏽
@Cechaflo 4 жыл бұрын
@@docfischer7291 The glue forms a very strong mass beneath. The needles are the same. I used a 110 size to attach the grey insert to lateral surrounding panel. For those stitches with thick thread I used a 180=24 needle size.
@jeffcarter1610 4 жыл бұрын
Great work, what glue do you use that reacts with heat
@Cechaflo 4 жыл бұрын
kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@bobolsen7921 2 жыл бұрын
please tell me were i can find that glue....i will enroll in your course
@Cechaflo 2 жыл бұрын
I get this glue from local suppliers (shoemaking supplies) here in Mexico. In the first anchored comment of this video there is a list of different trade marks of polyurethane heat activated glues. You would need to do your own research in order to find a good one that suits your own requirements. kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@user-hh4te3ik3b 4 жыл бұрын
👍👏👏👏❤
@davidmaldonado65 4 жыл бұрын
Is that a pen you use to mark the leather?
@Cechaflo 4 жыл бұрын
It is called 'leather marking silver pen' www.amazon.com/Tandy-Leather-Marking-Pen-2097-00/dp/B00QAUYDYI www.amazon.com/Leather-Upholstery-Marking-Scheider-Germany/dp/B015IA0HOA es.aliexpress.com/item/32815615375.html
@robertbremerc.ht.9447 2 ай бұрын
Where can I find the glue used in this video?
@Cechaflo 2 ай бұрын
This glue is called heat activated polyurethae glue. It is mostly used to stick insoles in shoe manufacturing. Trade marks are different in each country. In the first anchored comment of the attached video there is a list of similar products. You would have to do your own search. kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@ayaehab2304 3 жыл бұрын
👍💐
@lizzylizh 4 жыл бұрын
Does anybody know if you need a permit or license to open up a shop ? I can’t seem to find the right info on google lol , from California
@portlyoldman 3 жыл бұрын
Only in the land of the, so called, free do you need a permit to open a shop... 🧐
@alvarosilva4112 4 жыл бұрын
Boa tarde amigo, que belo trabalho, parabéns, vc poderia me dizer que tipo de cola é essa, será que dá pra usar ela pra fazer essas poltronas egg ou Swan, pq as colas que já usei depois de um tempo acaba soltando, obrigado.
@Cechaflo 4 жыл бұрын
He usado un pegamento que usan mucho los fabricantes de zapatos y le llaman pegamento de poliuretano. Después de secar, inclusive de un dia a otro se puede activar con calor para que pegue. Si es muy fuerte. kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@alvarosilva4112 4 жыл бұрын
@@Cechaflo obrigado
@piauicouro3848 4 жыл бұрын
Cola pu ou cola frita
@joelwilman8712 4 жыл бұрын
Que modelo de máquina de coser usó para esté trabajo?
@Cechaflo 4 жыл бұрын
Pfaff 1245-706/47 kzfaq.info/get/bejne/i5l4dbtzqaqvn6M.html
@watobarber3 3 жыл бұрын
🔥🔥🔥🔥🚀🚀🚀🙏🙏🙏🙏
@grecolipparini1264 4 жыл бұрын
what kind of glue you use?
@Cechaflo 4 жыл бұрын
I used polyurethane glue for this sample.kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@cliffharris1447 3 жыл бұрын
Can you tell me what type of glue that is?
@Cechaflo 3 жыл бұрын
Polyurethane glue. kzfaq.info/get/bejne/iq97eZl_276sdWg.html kzfaq.info/get/bejne/mbGcaNaandTFdKc.html
@cliffharris1447 3 жыл бұрын
Thank you
@Cechaflo 3 жыл бұрын
@@cliffharris1447 At the beginning of the polyurethane glue video in comment section(anchored) there is a list of different products hopefully one of them suits your requirements.
@cliffharris1447 3 жыл бұрын
Thank you buddy I appreciate you
@hasanhuseyincinci6668 4 жыл бұрын
🇹🇷🙋♂️👏👏👍
@eliasidem295 4 жыл бұрын
Solo una pregunta que clase de pegamento uso agradezco su ayuda
@Cechaflo 4 жыл бұрын
Es un pegamento transparente que usan los fabricantes de zapatos y tenis. Después de secar compleatamente se activa con calor para unir las piezas. Le llaman pegamento de poliuretano para zapateria.
@eliasidem295 4 жыл бұрын
Cechaflo como contactarlo le agradecería soy Tapizero también le agradecería su ayuda
@Cechaflo 4 жыл бұрын
@@eliasidem295 Aquí en este canal de tapicería.
@eliasidem295 4 жыл бұрын
Entiendo solo quería saber si lo puedo encontrar o se vende acá en usa y como se llama el pegamento y otras preguntas gracias también me puede encontrar como mv upholstery en Facebook
@Cechaflo 4 жыл бұрын
@@eliasidem295 Hay productos similares que podría Ud. investigar si se puede conseguir en USA Encontré algo de información: www.livemaster.com/es/item/26267243-manufacture-adhesive-polyurethane-sar-306-dermacol tkaniny-witmar.pl/en/adhesives-for-upholstery/310-kd-587.html es.decorexpro.com/montazhnyj-klej/poliuretanovyj-dlya-dereva/ www.fineleatherworking.com/leatherworking-contact-cement/
@nayanashashi5953 4 жыл бұрын
Which gum do you use
@Cechaflo 4 жыл бұрын
It is upholstery yellow glue (spreadable)kzfaq.info/get/bejne/pZiomMiryaycg6c.html
@suranbaijunusbekov7221 4 жыл бұрын
Tell me please, what the glue?
@Cechaflo 4 жыл бұрын
This glue is used a lot in the manufacture of shoes, tennis shoes, etc. kzfaq.info/get/bejne/iq97eZl_276sdWg.html Similar:SAR-306
@GEORGEKLID Жыл бұрын
καλησπερα πως λεγετε αυτη η κολλα που εβαλες ???
@Cechaflo Жыл бұрын
This "polyurethane glue" is used in shoemanufacturing. I am located in Mexico and trademarks are different but the content is the same everywhere. This videos could be useful: ✅ kzfaq.info/get/bejne/iq97eZl_276sdWg.html ✅ kzfaq.info/get/bejne/kJ-WkraptNSRm2Q.html
@GEORGEKLID Жыл бұрын
@@Cechaflo σε ευχαριστω πολυ κανεις πολυ ωραια δουλεια !!!!!!!!!!!!!!!!!!!!
@bmwe9091 3 жыл бұрын
What is the name of the glue?
@Cechaflo 3 жыл бұрын
I used a polyurethane glue. There are different trade marks in each country. You will find useful information about trade marks in the comment section of this video:kzfaq.info/get/bejne/iq97eZl_276sdWg.html
@mahomedeijaaz7236 4 жыл бұрын
What is the trimmer machine called?
@Cechaflo 4 жыл бұрын
Pfaff 1245-706/47 (old version)
@jjones5818 2 жыл бұрын
Watching this may be educational, but unless you have a shop full of pro upholstery equipment it's useless to the average.
@user-nm4zt9tz9i 4 жыл бұрын
Здравствуйте почему лицо не показываете и молчите, профессионально делаете.
@Cechaflo 4 жыл бұрын
These videos were not done to show my face or body. Just upholstery tips for interested persons. It would be interesting if you show us some of your upholstery job. I appear on this video at the beginning:kzfaq.info/get/bejne/fs94mdClqM6Zoac.html
@sarblade 3 жыл бұрын
I wish he would have spoken a bit, leaves us with too mush assumption.
@kylemaguire7259 3 жыл бұрын
Does he not talk in any of his videos?!?!
@fakesox3550 4 жыл бұрын
No offense but this looks terrible
Immersed
Рет қаралды 58 МЛН
超人夫妇
Рет қаралды 14 МЛН
Sam's Project Bench
Рет қаралды 197 М.
MECA Upholstery Tips
Рет қаралды 2,6 МЛН
Brian Morris
Рет қаралды 24 М.
Truck Drive
Рет қаралды 3 МЛН
Lilsnoop213
Рет қаралды 32 МЛН
Truck Drive
Рет қаралды 3 МЛН