Low Rider ST - Klock Werks *10-INCH* windshield!

Low Rider ST - Klock Werks 10-INCH windshield!

Рет қаралды 4,716

Жыл бұрын

SORRY ABOUT THE LIGHTING!
I picked up the Klock Werks 10" windshield today. Total game-changer. Significant difference over the 10" OEM windshield that I originally picked up when I bought the bike. 11/10 would recommend.
More changes coming to the bike this year (finally), as well as a trip to Montana. Super excited about that. Stay tuned to see 'em.

Пікірлер: 21

@Akaroa_Pilot Жыл бұрын

Just ordered one, bit worried my 6.5 risers and high bend bars might hit on full lock 🤔 might have to roll bars back a bit. Great video, thanks for sharing 😎

@rebelsroguesco Жыл бұрын

Interesting point you make because that is something I noticed after I made this video. With the stock risers/bars/mirrors, full lock causes the mirrors to hit the windshield. I was a little annoyed by that, but overall, I feel it's a small nuisance for how awesome the windshield is. I plan on doing the 9.5" TSC risers with pullback. Hoping the pullback will be enough to prevent that from happening. If it still does, I'll end up buying a different set of mirrors.

@ironrider8836 11 ай бұрын

Did it end up hitting? Or did it cleared?

@Akaroa_Pilot 11 ай бұрын

@@ironrider8836 I haven’t had a chance to install the screen yet, but I have had the bike finished, with the new risers and bars. Hopefully I will get a chance over the next few days. We are in winter here and the weather has been terrible to even work in a garage 🤔 cheers 🍺

@Akaroa_Pilot 11 ай бұрын

Finally installed the 10 inch Klock Werks, so, I have 6.5 inch risers and 5 inch High Bend Bars and LED Custom Dynamic mirrors. On full lock, everything clears, with the mirrors very close with only 1 inch to spare 😊

@DUSTY88 9 ай бұрын

Photos or videos of your set up?

@fvgc454ss 8 ай бұрын

How do you like the klockwerks after getting some time with it? Head buffeting?

@Akaroa_Pilot 8 ай бұрын

@@fvgc454ss No, head buffeting is very minimal, if any, at any speed, I’m only 5 8, so it takes a bit of getting used to as it’s very close to my eyeline view. It also looks better. A heap of protection 😎

@fvgc454ss 8 ай бұрын

@@Akaroa_Pilot does the recurve are the top affect your vision? I'm 6'2" had a clearview medium n buffeting at hwy speed was worse than stock

@bamm898 8 ай бұрын

Could you give a actual measurement top to bottom seems tall for a 10 inch, Thanks

@FFL-vg9ro 11 ай бұрын

$4500 just for a cam? That’s bat shit crazy high. Should be 4 to 5 hours labor ($600 to $750) plus cost of the cam. Add $500 for the dyno tune and you are just under $2k. How does the stealer justify $4500?

@rebelsroguesco 11 ай бұрын

No doubt. The cam & chest kit (S&S 475C) I was quoted runs about $1,430 on J&P/Dennis Kirk. I had them add in an air cleaner (~$450), and a new TTS tuner (~$600). Just parts would've had the job at $2,480. Labor is $110/hour. If we put the whole job at 8 hours (not sure if that's actually what was quoted) for cam replacement + dyno, we're adding another $880. Even with all that, the job would be at $3,360-not the $4,500 I was quoted.

@shotgun-studio 11 ай бұрын

I noticed more helmet buffering with the HD 10” on the highway. Does the Klock Works help with that any better?

@rebelsroguesco 11 ай бұрын

I haven't spent much time riding with a helmet at highway speeds with the Klock Werks shield yet, but I definitely feel the pocket of air is more calm in almost all riding conditions.

@eddieweaver4773 11 ай бұрын

So did I. Really pissed me off.

@fvgc454ss 8 ай бұрын

@rebelsroguesco any thoughts after having some time on it with that 10" klockwerks? Head buffeting at hwy speeds?