Lowering G80 M3 with KW HAS Height Adjustable Springs | SVBimmer
Рет қаралды 20,491
Күн бұрынGet your KW HAS kit:
bit.ly/3drDcFv
5x112 Future Classic Wheel Spacer:
bit.ly/3tQOZ9z
Browse our online store:
svbimmer.com/
Contact us:
SVBimmer
1150 Norman Ave, Santa Clara, CA 95054
info@siliconvalleybimmer.com
408-496-5800
Disclaimer: This video is intended for informational purposes only. Silicon Valley Bimmer (SVBimmmer) is not responsible for any damages or injury in the event that you attempt this installation. Although SVBimmer takes all reasonable care to ensure the measurements and directions are as accurate and up to date as possible, SVBimmer ensures no warranties or representations of any kind concerning the accuracy or suitability of information provided by this channel.
00:00 Intro
00:37 Unboxing
01:00 Installation
04:47 Before & After
06:04 Closing Thoughts
@SeanD2937 Жыл бұрын
Dude is precise! No dings no scratches 🤙
@Benmu2182 Жыл бұрын
Great installation! Hope most shops take this amount of time and care on there installation.
@jwardTLS Жыл бұрын
Thank you for the details around this installation. I'm taking delivery of my G80 in 2 weeks and already have a kW HAS kit in my garage waiting - I'm usually pretty careful but having a concise set of reminders in this video is really helpful
@Smllc22318 Жыл бұрын
Great video. Ordered mine last week. Same color and wheels. Would love to see more videos
@mraznjohnny 2 жыл бұрын
Great editing and tutorials very polished
@svbimmer 2 жыл бұрын
Glad you enjoy it 🙏
@tonyrivera697 Жыл бұрын
Great video! Car looks great powered
@randomhobbyist99 2 жыл бұрын
Beautiful spec!
@svbimmer 2 жыл бұрын
Thanks!
@Unknownbeast703 2 жыл бұрын
Quality video quality channel.
@svbimmer 2 жыл бұрын
Thank you for watching! Let us know what you would like to see. 👍
@obsessedus 2 жыл бұрын
That color tho 💚
@g.dubyou6263 2 жыл бұрын
Looks like you also added spacers. Thanks for the tutorial.
@svbimmer 2 жыл бұрын
Yes! Customer wanted more aggressive fitment. Future Classic was the choice.
@g.dubyou6263 2 жыл бұрын
@@svbimmer I sent you guys a message on FB Messenger about getting some KWs installed.
@svbimmer 2 жыл бұрын
@@g.dubyou6263 replied to you via email 👍🏽
@g.dubyou6263 2 жыл бұрын
@@svbimmer I found it. Thank you. 🙌
@blacksnow1337 7 ай бұрын
This fitment is perfect! What size spacers were used?
@MD-xb1qw Жыл бұрын
My control arm snapped on my F80 using KW HAS. i had to get reinforced ones made. Other than that, no issues or rubbing.
@hotmetal5 Жыл бұрын
How Does the alignment of the vehicle change as you raise and lower it? I’d imagine it throws off the specs of the alignment that was done at a particular height right after install….?
@UsefAfande 2 жыл бұрын
Very nice! Thank you for the well put together video! Did you use any spacers?
@svbimmer 2 жыл бұрын
Yes, customer added Future Classic spacers for front and rear. This one bit.ly/3pRGw1W
@mateuszfiutak6786 2 ай бұрын
@@svbimmer what dimensions of spacers did you use?
@m_autoguy_cali8116 2 жыл бұрын
What’s the installation cost? I have a ‘22 G80 on order (30-45 days out) and would like to get the KW kit installed. Thanks!
@hristomanchev1030 2 жыл бұрын
It looks amazing with the HAS kit. Really better than the stock height IMO. But is there a possibility with the lower height for the wheels to scrub against the inside of the fenders?
@svbimmer Жыл бұрын
There is absolutely no rubbing in the rear. Front does rub the front of the fender when paired with spacers
@bjcleveland2166 2 жыл бұрын
Outstanding video Sir! Can you please reccomend a performance shop in the philly area that can install these?
@svbimmer 2 жыл бұрын
Thank you for watching. We are located in California, not familiar with Philadelphia area.
@albihumolli1108 Жыл бұрын
Hi, what’s the torque spec on 3:04? I can’t find it anywhere. Thanks!
@mraznjohnny 2 жыл бұрын
Hell I’ll hire you to do my voice overs .
@Bobby-uf1yu 2 жыл бұрын
Is this at lowest recommended setting on front and rear?
@BrullloMoto Жыл бұрын
will this system work on the awd
@1kevinfail Жыл бұрын
hey will this work for the xdrive as well ?
@AW305 2 жыл бұрын
It's the voice over for me
@PretendNella Жыл бұрын
What height adjustments did yall go with?
@uMAD1981 Жыл бұрын
Would this work for the g82?
@holymolys7692 2 жыл бұрын
Looks a bit better but geand clearance is too limited on public road
@Becausefamilycar 17 күн бұрын
What spacers are there?
@shaneamcnally Жыл бұрын
Which green is that
@Rico71282 2 жыл бұрын
Would you be able to do springs on a 2022 X3M Competition? Thank you
@svbimmer 2 жыл бұрын
Yes of course! Send us an email to inquire info@siliconvalleybimmer.com
@tallxboi94 2 жыл бұрын
what size special tool was used for the top nut on the strut hat for the front and rear??
@Bim4life 4 ай бұрын
Did you ever find out what the special tool was?
@tallxboi94 4 ай бұрын
@@Bim4life yeah it was a 12 point 18mm schwaben socket
@Mikesg80 Жыл бұрын
@svbimmer what strut top removal tool is that used at the 1:48 mark
@Bim4life 4 ай бұрын
Did you ever find out what special tool he used?
@Any__Name 7 ай бұрын
Is this the lowest setting or?
@shawnbutler7854 2 жыл бұрын
Can it go lower?
@adrianwilliams1775 2 жыл бұрын
WOW! Looks incredible. Did you use Spacers in the front and rear?
@svbimmer 2 жыл бұрын
Yes! Customer went with Future Classic spacers.
@codraw 2 жыл бұрын
Oh my… and I thought the original m3 was low enough until now….
@benh4717 9 ай бұрын
he had Pzero's, its rubbing for sure!
@user-hz4pq9eh1c 2 жыл бұрын
Hi. Please tell me the size of the spacer you are using.
@svbimmer 2 жыл бұрын
12mm all around
@derrickwong3365 Жыл бұрын
Nice and detailed video. I am in Bay area and want to do the same setup. How much would it cost?
@svbimmer Жыл бұрын
Hi Derrick, please give us a call 408-496-5800 during business hour.
@CarloCo. 2 жыл бұрын
⭐️⭐️⭐️⭐️⭐️
@rajr4034 2 жыл бұрын
E9x M3 videos
@GoBrand0n 2 жыл бұрын
No Rubbing? No Spacers?
@ke9938 Жыл бұрын
Spacers.
@rengietorres9482 2 жыл бұрын
Any rubbing? With this set up
@svbimmer 2 жыл бұрын
No rubbing before spacer.
@cashblack3357 2 жыл бұрын
@@svbimmer I'm planning kW has too,how about any rubbing after spacers?
@svbimmer 2 жыл бұрын
@@cashblack3357 some rubbing of inner fender liner after spacers
@bigworm1384 2 жыл бұрын
@@svbimmer in the front or rear?
@svbimmer 2 жыл бұрын
@@bigworm1384 front at full turn.
@ast1897 10 ай бұрын
I'd rather raise the front to be honest. I panic every time I have to pull into a parking lot or go over a bump.
KING Performance Düsseldorf e.K.
Рет қаралды 4,3 М.
BalcevMMA_BOXING
Рет қаралды 4,5 МЛН
ГОНЩИК БЕЗ СЛУХА
Рет қаралды 4,3 МЛН