Lowering Our Brand New 8Y Audi RS3! *Best Stance Guaranteed!

Рет қаралды 3,722

4 ай бұрын

👋 The Audi RS3 needs a lower ride height ASAP! After installing wheel spacers to have the factory wheels nice and flush, now we need to dial in the ride height. Today I install H&R Sport lowering springs to our 2024 Audi RS3 8Y. This installation was super easy and really was straight forward. I did the whole project in about 4 hours. The H&R springs lowered the RS3 1in all around and the wheel fitment is perfect! I have 10mm wheel spacers up front and 15mm wheel spacers in back and these springs helped get the stance perfect looking! Lowering springs also retain the factory suspension settings with no issues and increase the handling capabilities. This is a great way to go to enhance the look and handling of your Audi RS3 and for sure is a must have modification!
🤠 Order Your Audi RS3 Lowering Springs or Coilovers HERE!
brosfourrspeed.com/parts-%26-...
Wheel Bolts: brosfourrspeed.com/parts-%26-...
Wheel Spacers: brosfourrspeed.com/parts-%26-...
Spindel Spreader: amzn.to/49xxmxH
Strut Compressor: amzn.to/49Bc5TT
Pass Through Sockets; amzn.to/4bUMuqH
Order Wheels and Tires From Fitment Industries:
www.fitmentindustries.com/?am...
Order a Pedal Commander Here:
sdqk.me/59Z0ZUVh/eovbtq8d
Order LED lights and All Weather Floor Mats Here!
www.lasfit.com/
SAVE 10% by using "Brosfourrspeed10"
Our Equipment:
- Sony ZV1 ii: amzn.to/3QMqmWO
- Cannon M50: amzn.to/3CTphmE
- Rode Mic: amzn.to/3JDJMIB
- Joby Suction: amzn.to/3SCrWZ7
- 64GB SD Card: amzn.to/3bJQwUK
- GoPro Hero 10: amzn.to/3LHEj6e
- DJI Mavic Mini: amzn.to/3uoOfHS
- Apple MacBook Pro: amzn.to/3gSIdMD
- LowePro Bag: amzn.to/3wi1wlX
- Tripod: amzn.to/3cJMAr1
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Lowering Our Brand New 8Y Audi RS3! *Best Stance Guaranteed!
Music By: www.epidemicsound.com
#audirs3loweringsprings #rs3loweringsprings #loweringsprings

Пікірлер: 40

@vinh3922 27 күн бұрын

Nice tutorial, i have a 23 S3 8Y, i have planned to install the racingLine lowering springs. Do you have any issue with the adaptive suspensions? also, aren't there any stretch bolts that are one time use? Did you torque everything back to specs? thank you

@amill1563 4 ай бұрын

Looks great! If it was mine I may consider front and rear strut tower bars for added rigidity and perhaps aftermarket sway bars.

@BrosFOURRSpeed 4 ай бұрын

Yeah I've heard a lot of owners talk about doing swaybars. I'll have to look into those along with a strut bar

@nickbowl2323 4 ай бұрын

Looks great. The trainer tape measure though lol.

@BrosFOURRSpeed 4 ай бұрын

Just a basic tape measure. Seems to do the job

@tilerf308 4 ай бұрын

Have you experienced rubbing on the rear fender guard with 15mm spacers? I had to switch to 10mm to avoid rubbing under load/launch control.

@BrosFOURRSpeed 4 ай бұрын

So far no. I’ve launched the car and everything. No rubbing even leaving my driveway

@boydmarvitz2531 2 ай бұрын

I love the finished product, does the one inch lower stance affect speed bumps or parking curbs? Do you still have clearance without rubbing?

@BrosFOURRSpeed 2 ай бұрын

I have plenty of clearance. Never scraped on anything so far and our driveway has a steep curb. So it's a great setup!

@pchhabra7 2 ай бұрын

How long after install (miles) did you do an alignment? I'm about to put in H&R's with spacers and wondering if you let the springs settle before doing an alignment?

@BrosFOURRSpeed 2 ай бұрын

I actually haven't got one yet. I need to tho. I'd give it a week or so to let things settle. But we've only driven the car maybe 300 miles since this. Haver been very busy with other cars lately

@carlotlife5013 3 ай бұрын

Follow up question, what jack point did you use u see the car to put the jack stands on the pinch welds?

@BrosFOURRSpeed 3 ай бұрын

ON the rear I used part of the subframe. You can see a bit bolt behind the tires bolting the subframe to the chassis. Front I used a part of the subframe as well that was silver and close to the lower control arm point that connects to the chassis

@loveiarora4191 Ай бұрын

Hey mate , did you notice any creaking sounds when lowered > I have now tried kw has and eibach sportlines and they Both creaked at stationary or low speed reverse park when rotating the steering wheel , I wonder if h&r are any different , since then I put the car back to stock and the creaking disappeared

@BrosFOURRSpeed Ай бұрын

Yeah sometimes when I'm backing up I hear a little bit. These even have the rubber covers on the springs. It's not much tho. I even cleaned the bases perfectly.

@TheCoolwater22 3 ай бұрын

Great job on the install! Some folks recommend replacing the single use bolts and nuts for the install. Curious if you saw the need to swap those or not.

@BrosFOURRSpeed 3 ай бұрын

I never heard anything about that. All the bolts seemed fine to keep using

@TheCoolwater22 3 ай бұрын

@@BrosFOURRSpeed sounds good. That’s what I thought also. Never had to replace the bolts/nuts on lowering any of my Audis. It was discussed on a couple of the Audi forums for torque to spec bolts/nuts that it’s recommended to replace. Anyway I will be lowering my car soon also. 👍

@cicliolmo7152 2 ай бұрын

a month on now, did you get any additional drop from the springs settling, or its still pretty much at the same ride height on this clip ?

@BrosFOURRSpeed 2 ай бұрын

Actually not really. Still seems to be the same. Great setup for sure!

@6hnry Ай бұрын

Is there a torque spec on the suspension bolts?

@BrosFOURRSpeed Ай бұрын

From what I've found. The big lower bolts need about 50 pounds. The rest are ranging from 20-30 pounds. So honestly, just nice and tight should do the trick. I seem to do a good job matching the torque specs from how it feels when I loosen them to hand tightening. So you can feel it out and tighten them the same amount of pressure you felt when you took them out. And use a torque wrench to double check

@ralphsnightmare103 Ай бұрын

are these the sport springs or super sport? have you tried the super sport?

@BrosFOURRSpeed Ай бұрын

Sport springs. Super sport it s bit lower I believe. These are perfect for our taste

@EC-uq8xq Ай бұрын

I heard the H and R springs made it a pogo stick? Can you comment on the ride quality?

@BrosFOURRSpeed Ай бұрын

Ever now and then in slow speed I hear a small creek sound. Ride quality is great tho. Rides like stock, drive modes still work perfect. But the car is tighter in the turns and under hard breaking and accelerating. Great setup overall

@Joe-eg7ml Ай бұрын

Any negatives to the springs...bouncy, noisy, etc?

@BrosFOURRSpeed Ай бұрын

Nope. Rides just as solid as stock. But a tad stiffer in the hard turns and under breaking and acceleration. Really helped dial in the handling! No squat either under hard acceleration. So the car feels much more responsive. And looks much better

@Joe-eg7ml Ай бұрын

@@BrosFOURRSpeed can't wait to get my RS3