I’ve looked at close to a hundred different “How To” videos on this subject. Your stuff has been the most effective, thorough, and simple to follow by far. Thanks for sharing-

Great video!!! Set up on Live and in hull today. Worked perfectly. Thank you.

man definitely the best guy for lowrance info. Thanks for the info :)

Great Video Paul. One of your best IMO.

In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzfaq.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.

Absolutely awesome......thanks Paul, you are a champion!

Awesome! Always knocking it out of the park

Your videos are always good. Thanks.

Thanks Paul from Australia, your Lowrance vids are the best.

Hey I liked this Video It helped me get my new unit set up, Much appreciated and It is worth watching two or three times. Thanks!

Excellent idea thank you I just got this unit HDS 12

great info! Just got my first Lowrance, a HDS7 Live for my kayak, and trying to learn all I can. This video helps a lot Thanks!

Thank you for the info - It helped me with my new system,

Great Video!! Helped so much!!

Very good info on the point 1!

👍🏻 Awesome info

Your a star...make it easy for us numptys. Thanks

I do not have a transducer cable for my front fish finder, I am using the US2 adaptor from my Ultrex. What do I select for "Transducer type"?

Big Help!!!

Paul for my new TI2 9” units I’m still running my Old LSS transducer on my boat since I haven’t installed the 2in1 that came with the unit. Am I missing out on a lot by not having that 2in1 on there yet ? I have a shoot thru Hull for my 2d traditional. I’ve noticed trolling on Lake Erie that I don’t get the nice bright colored fish arches like I did with my HDS gen 2 unit. And thanks for all the help you give me it’s really appreciated.

Just a heads up, you’re using dual $250 GPS receivers with 5 meter accuracy, so having the rear point 1 just for having a closer gps for waypoints is irrelevant.

Thanks for the information. Only problem I am having is my depth does not show on down scan. Depth will only show on screen in traditional sonar screen. I am sure its a setting somewhere.

Great video as usual Paul! Have a question on the heading sensor while running. Do I have to run a point one up front or can I run it off of my front bow unit (hds3) while running a live at the console? I have a point one at the back near the transducer if I need to run the heading sensor off of that one but saw you didn't recommend that due to sliding around corners when running at high speeds. Thanks Paul!!!

Do you use the same process for the HDS 9 Live or is there different settings you need to use?

Great video!! Is there a chart speed for the down imaging. I just bought a hds live. It doesnt appear to be moving fast enough as I'm trolling on my post trolling motor

Paul can i install a point one ant on my new 9TI 2 unit ? and do youhave a Video for that ?

Paul why do you prefer 200 kHz vs chirp on your 2D sonar setting? Great video really helped me setting up my new carbon

Do you know how to turn on contours on the charts? Low range has a video where they just push a button. It won’t highlight the button nor let me push it. Are they making me purchase something? Thanks for your help!!! Can’t find anything in the manual or their website or the Internet.

thanks for taking the time to do this. Just got a new boat with a 12 and a 9 and could not get the 9 to show temp. I'll try the tip on the setup local when I get back up Can you tell me if there is a way to change the font size on the sonar for the depth and temp. They are really hard to read - the colors of the sonar seem to be making it difficult to see....

Are you using the C-Map withing the unit, or are you using a chip for Maps? The Navionics chip i have for the great lakes does not really give any better detail. As a matter of fact its worse then the C-Map in some areas on Lake Michigan.

At the 3:30 mark in this video: I have HDS Live 12. Do I choose the PDRT transducer also or does the 12 have a different in hull transducer than the 16?

They need to start a new circuit call the throwback series , This series would consist of your bass rig with almost no electronics only a old school type screen no GPS etc.. let see how good you good ol boys really are, I know when i was fishing tourneys pre electronics and we were pulling 20lbs 5 fish bags there was no stopping who ever got on em. but these days with all these electronics... idk, the skill of reading the lake/water has been removed from the game. I mean we all have a general idea what the fish should be doing depending on time of the year but lets see who's really good at fishing opposed to who really good at reading electronics a lot of winner will turn into losers real fast!!. Just my humble opinion.. Peace out!

Hi I changed my temperature form global to local and it don’t show me temperature in sonar source only depth . How I can put it back ?

Great video, thanks for sharing! Could you please place the link of that video you are mentioning here on this time: 9:33 ? Thanks in advance!

How do you add boat docks to your mapping

My 3 in 1 transducer didn't auto detect and my transducer list doesn't show it to select. Any idea?

Great video, are you local in Florida?